Xin Li
Xin Li has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Bin Yang
Inst China North Ind Grp, Yantai 264003, Shandong, Peoples R China
5 shared publicationsHong Zhong
5 shared publicationsHui Xie
4 shared publications- Hui Xie
School of Material Engineering, Xihang University, Xi’an, China
4 shared publications Yalong Zhang
4 shared publicationsYing Ma
4 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by Elsevier in SSRN Electronic Journal
Dual-MXene architecture enables fast and durable potassium storage in SnSe0.5S0.5 anodes
Potassium-ion batteries (PIBs) are promising alternatives to lithium-ion batteries, yet the large ionic radius of K+ imposes sluggish reaction kinetics and severe structural degradation on high-capacity anodes. Herein, a dual-MXene architecture is developed by integrating SnSe0.5S0.5 nanoparticles with accordion-like multi-layer Ti3C2Tx MXene and employing few-layer Ti3C2Tx MXene as a conductive binder. The multi-layer MXene serves as a conductive scaffold that disperses and accommodates the SnSe0.5S0.5 active phase, while the few-layer MXene bridges neighboring composite particles to establish an interconnected electrode-level network. This hierarchical architecture markedly improves electrical connectivity, mechanical integrity, and reaction kinetics during repeated potassiation/depotassiation. As a result, the optimized electrode delivers 334.2 mAh g-1 after 200 cycles at 0.1 A g-1, retains 171 mAh g-1 after 900 cycles at 1.0 A g-1, and maintains 187 mAh g-1 at 5.0 A g-1. Electrochemical analyses reveal enhanced charge-transfer and K+ transport kinetics together with a greater capacitive contribution, while ex situ measurements support more reversible phase evolution and improved preservation of the electrode architecture. This work demonstrates that coupling a conductive MXene scaffold with a conductive MXene binder provides an effective strategy for integrating nanoscale structural accommodation with electrode-level charge transport in high-capacity PIB anodes.
- 22 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDual-MXene architecture enables fast and durable potassium storage in SnSe0.5S0.5 anodes
Potassium-ion batteries (PIBs) are promising alternatives to lithium-ion batteries, yet the large ionic radius of K+ imposes sluggish reaction kinetics and severe structural degradation on high-capacity anodes. Herein, a dual-MXene architecture is developed by integrating SnSe0.5S0.5 nanoparticles with accordion-like multi-layer Ti3C2Tx MXene and employing few-layer Ti3C2Tx MXene as a conductive binder. The multi-layer MXene serves as a conductive scaffold that disperses and accommodates the SnSe0.5S0.5 active phase, while the few-layer MXene bridges neighboring composite particles to establish an interconnected electrode-level network. This hierarchical architecture markedly improves electrical connectivity, mechanical integrity, and reaction kinetics during repeated potassiation/depotassiation. As a result, the optimized electrode delivers 334.2 mAh g-1 after 200 cycles at 0.1 A g-1, retains 171 mAh g-1 after 900 cycles at 1.0 A g-1, and maintains 187 mAh g-1 at 5.0 A g-1. Electrochemical analyses reveal enhanced charge-transfer and K+ transport kinetics together with a greater capacitive contribution, while ex situ measurements support more reversible phase evolution and improved preservation of the electrode architecture. This work demonstrates that coupling a conductive MXene scaffold with a conductive MXene binder provides an effective strategy for integrating nanoscale structural accommodation with electrode-level charge transport in high-capacity PIB anodes.
- 13 May 2024
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 305
Influence of group Ш elements doping on thermoelectric properties of Mg3Sb1.5Bi0.5 alloy
- 13 May 2024
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 305
Influence of group Ш elements doping on thermoelectric properties of Mg3Sb1.5Bi0.5 alloy
- Open Access
- 12 April 2023
- Published by Elsevier in Results in Physics
- Vol. 48
First-principles calculations to investigate probing the influence of Mn and Mg doping concentration on electronic structures and transport properties of SnTe alloys
- 12 April 2023
- Published by Elsevier in Results in Physics
- Vol. 48
Open AccessFirst-principles calculations to investigate probing the influence of Mn and Mg doping concentration on electronic structures and transport properties of SnTe alloys
- 3 April 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 293
Influence of N-type doping sites on electronic transport properties of Mg3Sb1.5Bi0.5 alloys
- 3 April 2023
- Published by Elsevier in Materials Science and Engineering: B
- Vol. 293
Influence of N-type doping sites on electronic transport properties of Mg3Sb1.5Bi0.5 alloys
- 14 November 2022
- Published by Elsevier in Materials Research Bulletin
- Vol. 159, 112106
Synergistic effects of Mg vacancy and Ag doping on thermoelectric transport properties of p-type Mg3Sb2
- 14 November 2022
- Published by Elsevier in Materials Research Bulletin
- Vol. 159, 112106
Synergistic effects of Mg vacancy and Ag doping on thermoelectric transport properties of p-type Mg3Sb2
- 1 January 2022
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 71 (24) , 248401
Effect of Sb/Bi atom substitution site on electronic transport properties of Mg2Si0.375Sn0.625 alloy
中温区Mg2(Si,Sn)基热电材料因其廉价、无毒无害等优点极具发展潜力。其中,三元Mg2Si1-xSnx合金的电子传输性能须通过元素掺杂来进行优化,最常见的掺杂元素Bi和Sb均可以对载流子浓度、迁移率和有效质量等传输性能参数进行调节,而不同的原子置换位置会对合金的电子传输特性产生较大的影响。因此,本工作采用第一性原理计算的方法,对Sb、Bi元素分别置换Si、Sn位置的缺陷形成能进行了分析,结合能带结构和态密度的变化分析其对载流子传输性能参数的影响。通过甩带快速凝固方法制备了Bi、Sb掺杂Mg2Si1-xSnx晶体,结合求解Boltzmann方程对电子传输性能的预测结果进行对比分析。结果表明,Bi、Sb原子均更加倾向于取代Si位,Sb原子的取代具有更低的形成能。与Bi元素相比,相同成分的Sb掺杂下载流子浓度较低,但可以提供更大的载流子有效质量,因此可以获得更高的Seebeck系数和功率因子,最高值可达-228 μVK-1和4.49 mWm-1K-2,而Bi掺杂可以提供更高的电导率。本研究结果可以为掺杂优化Mg2(Si,Sn)基合金的热电性能提供理论参考。
- 1 January 2022
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 71 (24) , 248401
Effect of Sb/Bi atom substitution site on electronic transport properties of Mg2Si0.375Sn0.625 alloy
中温区Mg2(Si,Sn)基热电材料因其廉价、无毒无害等优点极具发展潜力。其中,三元Mg2Si1-xSnx合金的电子传输性能须通过元素掺杂来进行优化,最常见的掺杂元素Bi和Sb均可以对载流子浓度、迁移率和有效质量等传输性能参数进行调节,而不同的原子置换位置会对合金的电子传输特性产生较大的影响。因此,本工作采用第一性原理计算的方法,对Sb、Bi元素分别置换Si、Sn位置的缺陷形成能进行了分析,结合能带结构和态密度的变化分析其对载流子传输性能参数的影响。通过甩带快速凝固方法制备了Bi、Sb掺杂Mg2Si1-xSnx晶体,结合求解Boltzmann方程对电子传输性能的预测结果进行对比分析。结果表明,Bi、Sb原子均更加倾向于取代Si位,Sb原子的取代具有更低的形成能。与Bi元素相比,相同成分的Sb掺杂下载流子浓度较低,但可以提供更大的载流子有效质量,因此可以获得更高的Seebeck系数和功率因子,最高值可达-228 μVK-1和4.49 mWm-1K-2,而Bi掺杂可以提供更高的电导率。本研究结果可以为掺杂优化Mg2(Si,Sn)基合金的热电性能提供理论参考。
- Open Access
- 18 May 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 127 (19) , 195104
Anisotropic electronic transport properties of Ag-oped Mg3Sb2 crystal prepared by directional solidification
Ag-doped Mg3Sb2 crystals are successfully grown via a directional solidification method with high temperature gradient. The microstructure of the crystal is homogeneous and without precipitation. Both electrical conductivity and Seebeck coefficient are anisotropic in two crystallographic directions ([001] and [101]) due to anisotropic effective mass and mobility of the carriers. Thermal conductivity is isotropic too, and the maximum Seebeck coefficient is 265 μV K−1 in the [001] orientation, which represents a substantial improvement over previous results. As a consequence, the maximum power factor for the 2.5 at. % Ag-doped crystal is 1.21 mW m−1 K−2 in the [001] orientation, which results in an elevated ZT of 0.67 at T = 800 K. First principles calculations and Hall measurements are used to verify the experimental results.
- 18 May 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 127 (19) , 195104
Open AccessAnisotropic electronic transport properties of Ag-oped Mg3Sb2 crystal prepared by directional solidification
Ag-doped Mg3Sb2 crystals are successfully grown via a directional solidification method with high temperature gradient. The microstructure of the crystal is homogeneous and without precipitation. Both electrical conductivity and Seebeck coefficient are anisotropic in two crystallographic directions ([001] and [101]) due to anisotropic effective mass and mobility of the carriers. Thermal conductivity is isotropic too, and the maximum Seebeck coefficient is 265 μV K−1 in the [001] orientation, which represents a substantial improvement over previous results. As a consequence, the maximum power factor for the 2.5 at. % Ag-doped crystal is 1.21 mW m−1 K−2 in the [001] orientation, which results in an elevated ZT of 0.67 at T = 800 K. First principles calculations and Hall measurements are used to verify the experimental results.
- 5 May 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (12) , 9773-9782
Influence of growth rate and orientation on thermoelectric properties in Mg3Sb2 crystal
- 5 May 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (12) , 9773-9782
Influence of growth rate and orientation on thermoelectric properties in Mg3Sb2 crystal