YGYang Guo

Yang Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Guo has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on the Impact of Diluent Dosages on the Epoxy–Polythiol Self-Healing System

    by Jiajia Sheng, Yang Guo, Xin Pang, Wenjing Ma, Hailu Yang, Yalin Liu, Linbing Wang, Shanglin Song

    Self-healing technology is an effective method for enhancing the crack resistance of cement-based composites. This study focuses on the impact of the environmentally friendly diluent C12-14 alkyl glycidyl ether (AGE) on the performance of the epoxy resin–polythiol (rimethylolpropane tris (3-mercaptopropionate), TMPMP) self-healing system, examining core fluidity, microcapsule properties, molecular dynamics, and the mechanical properties of cured products. The results show that as the AGE dosage increases, the particle size distribution of microcapsules becomes more concentrated, and the dispersion of particles is improved. Fourier-transform infrared spectroscopy confirms the successful encapsulation of E-51 and AGE. Microcapsules maintain structural integrity at high temperatures of 423.15 K. The onset thermal degradation temperature of the mixture shows an increasing trend with reduced AGE dosage. Specifically, TMPMP35% exhibits an onset degradation temperature of 370.95 K, while that of TMPMP20% is increased by 57.57% compared to TMPMP35%. Conversely, the initial and peak temperatures of the curing reaction decrease with less AGE incorporation. Thermodynamic analysis reveals that activation energy (E) initially increases and then decreases with increasing AGE. The frequency factor (A) correlates positively with the heating rate, indicating that the curing reaction’s reactivity is closely linked to heating rate. Minor variations in the reaction rate constant (k) indicate that the self-healing system maintains stable reactive activity at low temperatures. Notably, the AGE dosage significantly affects the rigidity of the self-healing system; the average Young’s modulus inversely correlates with AGE dosage, with the most substantial decrease of 5.88% occurring when AGE increases from 30% to 35%. This study offers insights into optimizing diluent ratios to balance self-healing and mechanical properties, essential for developing high-performance self-healing cement materials.


  • Open Access

    Development and Temperature Correction of Piezoelectric Ceramic Sensor for Traffic Weighing-In-Motion

    by Hailu Yang, Yue Yang, Guanyi Zhao, Yang Guo, Linbing Wang

    Weighing-In-Motion (WIM) technology is one of the main tools for pavement management. It can accurately describe the traffic situation on the road and minimize overload problems. WIM sensors are the core elements of the WIM system. The excellent basic performance of WIMs sensor and its ability to maintain a stable output under different temperature environments are critical to the entire process of WIM. In this study, a WIM sensor was developed, which adopted a PZT-5H piezoelectric ceramic and integrated a temperature probe into the sensor. The designed WIM sensor has the advantages of having a small size, simple structure, high sensitivity, and low cost. A sine loading test was designed to test the basic performance of the piezoelectric sensor by using amplitude scanning and frequency scanning. The test results indicated that the piezoelectric sensor exhibits a clear linear relationship between input load and output voltage under constant environmental temperature. The linear correlation coefficient R2 of the fitting line is up to 0.999, and the sensitivity is 4.04858 mV/N at a loading frequency of 2 Hz at room temperature. The sensor has good frequency-independent characteristics. However, the temperature has a significant impact on it. Therefore, the output performance of the piezoelectric ceramic sensor is stabilized under different temperature conditions by using a multivariate nonlinear fitting algorithm for temperature compensation. The fitting result R2 is 0.9686, the root mean square error (RMSE) is 0.2497, and temperature correction was achieved. This study has significant implications for the application of piezoelectric ceramic sensors in road WIM systems.


  • Open Access

    Effect and Response of Coal and Rock Media Conditions on Deep-Hole Pre-Splitting Blasting Techniques for Gas Drainage

    by Haojun Wu, Min Gong, Xiaodong Wu, Yang Guo

    Different types of deep-hole blasting techniques are needed to solve gas drainage problems in complex and variable cases. Blasting parameters suitable for mines are selected based on the relationship between blast stress field changes and gas flow combined with field application and numerical simulation. The Datong Mine was a background to study the blast crush zone and drainage influence range following deep-hole blasting with holes laid in coal seams, which resulted in a 24% increase in gas flow in the drainage hole 6 m from the blast hole. In response to the difficulty of forming blast holes in the soft coal seam of the Yuyang Mine, drilling and blasting in the floor rock stratum adjacent to the coal seam increased the gas flow in the drainage holes by 125%. When applying the deep-hole technique with holes crossing multi-seams for gas drainage in Shiping Mine, the volume of gas drainage increases significantly with increased effective stress in the drainage hole. For example, when the spacing at the hole’s bottom between the blast hole and the drainage hole is 4.6 m, the volume of gas drainage increases by 3.3 times, compared with 8.8 m. Twenty-six protruding mines in southern China have applied the above deep-hole pre-splitting blasting technology, all of which have achieved good results and are of great significance to future applications in multiple fields, such as gas control.


  • Open Access

    The Effect of Microbiologically Induced Concrete Corrosion in Sewer on the Bearing Capacity of Reinforced Concrete Pipes: Full-Scale Experimental Investigation

    by Yajian Wang, Pengpeng Li, Huifang Liu, Wentao Wang, Yang Guo, Linbing Wang

    The main part of sewer pipelines is commonly made up of precast reinforced concrete pipes (RCPs). However, they often suffer from microbiologically induced concrete corrosion (MICC), which has made them less durable than expected. In this study, three-edge bearing tests (TEBT) are performed on full-scale RCPs with preset wall losses to determine how MICC influences their bearing performance. For this purpose, several bearing indices such as D-load, peak load, ultimate load, ring deflection, ring stiffness, and failure energy are presented or specified to characterize the load-carrying capacity, stiffness, and toughness of these RCPs. It is found that crown concrete corrosion hardly changes the mechanical behavior of the first elastic zone of RCPs, so that D-load is not affected, but it shortens the crack propagation zone significantly, leading to a reduction in ultimate and peak loads. Furthermore, RCPs’ ring stiffness and toughness are negatively correlated to thickness of wall loss, while the transverse deformability of the ring cross-section is positively correlated with it. Additionally, it was found that crown corrosion affects the ultimate load of different sizes of RCP in different ways. The 2000 mm RCP is affected the most, with a 50 percent reduction in ultimate load. The 1000 mm RCP follows, with a 36 percent reduction, and the 1500 mm RCP has a reduction of less than 20 percent. This research contributes to comprehending the degradation of in-service sewage pipes, hence informing decision making on sewer maintenance and rehabilitation.


  • Open Access

    Investigation of the Blast-Induced Crack Propagation Behavior in a Material Containing an Unfilled Joint

    by Peng Xu, Renshu Yang, Yang Guo, Zhicheng Guo

    This study uses a dynamic caustic technique to study the crack propagation in a medium containing an unfilled joint under blasting. The results show that for the medium containing a vertical unfilled joint, the reflected dilatational wave from the joint tends to suppress both the K I d and the velocity of the opposite propagating crack. However, for the medium containing an oblique joint, the reflected wave from the joint increases K II d , and induces the opposite propagating crack deflect from its original path. Compared with the medium with a vertical joint, the wing cracks are more easy to initiate at the oblique joint where a significant stress concentration is formed under the diffraction of the blast wave. Combined with numerical results, it is found that the wing crack deflects in the clockwise direction when the shear stress was negative, and it turns to counterclockwise when the shear stress was positive.