PJPaweł Jagoda

Paweł Jagoda

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paweł Jagoda has a total of 147 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Accuracy and Equivalence of Particle Number Concentration Measurements (0.3–10 µm) from a Low-Cost Sensirion SPS30 Compared with the OPS 3330 Under Field Conditions

    by Tomasz Gorzelnik, Mateusz Rzeszutek, Jakub Bartyzel, Paweł Jagoda, Tomasz Pełech-Pilichowski

    Mass concentrations of particulate matter are a fundamental metric for air quality and health impact assessment; however, they are insufficient for accurately characterizing exposure. They do not capture particle size distribution or number concentration. Therefore, aerosol assessment should include particle number concentration (PNC), which better represents toxicologically relevant fractions and enables more precise source identification. The aim of this study was to conduct a comprehensive evaluation of particle number concentration (PNC) measurements in the 0.3–10 µm size range obtained using three low-cost Sensirion SPS30 particle sensors under field conditions in an urban environment. The analyses included an assessment of agreement between the SPS30 sensors, an evaluation of their measurement performance against the OPS 3330 optical particle spectrometer, and the development of calibration models. The SPS30 sensors showed high inter-device repeatability for PNC in the 0.3–1.0 µm range (CVd < 2%). However, measurement performance declined with increasing particle size, with the index of agreement (IOA) decreasing from 0.8 (0.3–0.5 µm) to −0.5 (2.5–10 µm). Sensor accuracy was influenced by meteorological conditions: relative humidity primarily affected short-term variability (precision and dynamic agreement), while temperature controlled systematic bias. Although incorporating these variables into advanced calibration models improved performance, SPS30 sensors remained unsuitable for PNC measurements in the 2.5–10 µm range, exhibiting systematic errors of ~25% even after nonlinear correction. The findings support the responsible use of low-cost particle sensors for supplementary air quality monitoring, contributing to accessible environmental data and sustainable urban air quality management.

  • Open Access

    Majority of methane emissions from European biogas plant supply chains could be eliminated at no net cost

    by Maria Olczak, Luke Dubey, Dave Lowry, James L. France, Julia B. Wietzel, Martina Schmidt, Paweł Jagoda, Paul Balcombe

    Biogas, and its purified form – biomethane, offers substantial low-carbon energy potential, but uncertainties regarding methane emissions may undermine this benefit. This study addresses this uncertainty through a mixed-method emissions survey across three European countries, combined with environmental assessment, mitigation analysis and regional policy comparison. Our findings reveal that methane emissions from biogas production average 14.4 kg/h per site (5.4% of methane produced) with a range of 1.3-57 kg/h (2%-21.7%). These values exceed previous estimates, yet 59% of emissions could be eliminated at no net cost. When considering full supply chain emissions, methane emerged as the dominant greenhouse gas, accounting for 47% (18-93%) and 60% (34-94%) of greenhouse gases over 100- and 20-year time horizons, respectively. We advocate for EU and national policy revisions to better account for methane’s contribution and enhance emissions monitoring, highlighting the need for policy interventions incorporating recent advances in methane measurement and cost-effective mitigation strategies.


  • Open Access

    Measurement report: Temporal variability of vertical profiles of CO 2 and CH 4 over an urban environment

    by Mirosław Zimnoch, Michał Gałkowski, Piotr Sekula, Łukasz Chmura, Jakub Bartyzel, Alina Jasek-Kamińska, Alicja Skiba, Jarosław NęCki, Paweł Jagoda, Michał Kud, et al.

    Improving estimates of city emissions requires a better understanding of pollutant transport dynamics within the urban boundary layer (UBL), particularly for greenhouse gases (GHGs), given the importance of cities in mitigation efforts. Due to heterogeneous emission sources and complex atmospheric processes, diverse observational datasets are needed to constrain urban transport and support inversion frameworks to estimate emissions. In this context, vertical profiles of GHGs provide critical information. This study presents results of 11 vertical profiling campaigns conducted in Krakow, southern Poland, over one year (March 2021–February 2022). The aim was to obtain high-resolution measurements of CO2 and CH4 mole fractions, together with key meteorological variables, within the urban boundary layer of a mid-latitude city with a population of close to one million. Such datasets of vertical profiles up to 280 m above ground level (a.g.l.) are rare, particularly within city limits, and are intended to support the development of a city-scale inversion system. Measurements were carried out using a Picarro G2311-f cavity ring-down spectrometer deployed on two platforms: (i) a tethered tourist balloon in the city centre, reaching up to 280 m a.g.l., and (ii) an uncrewed aerial vehicle (UAV) operating up to 100 m a.g.l. For UAV measurements, the analyser remained on the ground and sampled air through a 200 m tube. To our knowledge, this is the first application of this approach for vertical GHG profiling. Meteorological variables, including temperature, relative humidity, pressure, and wind, were measured using calibrated low-cost sensors mounted on both platforms. The observations enabled a detailed analysis of the structure and evolution of the UBL under varying meteorological conditions throughout the year. The altitude range of the platforms allowed frequent detection of stable nocturnal boundary layers, as well as elevated CO2 and CH4 plumes above them during the night and morning periods, likely associated with strong emission sources outside the city. In general, the dataset provides a valuable record of high-resolution vertical GHG distributions and meteorological conditions in an urban environment. It helps fill a key observational gap in the lower troposphere over cities and offers important insights for studying urban boundary layer processes and improving emission estimates.

  • Open Access

    Top-down quantification of methane emissions from the oil, gas and waste sectors on the Arabian Peninsula using helicopter-borne observations

    by Eric Förster, Heidi Huntrieser, Niclas Maier, Halima Al Hinaai, Falk Pätzold, Lutz Bretschneider, Astrid Lampert, Jarosław NęCki, Jakub Bartyzel, Paweł Jagoda, et al.

    Methane (CH4) emissions from the oil and gas (O&G) sector remain highly uncertain on the Arabian Peninsula, despite the region’s major contribution to global hydrocarbon production and increasing mitigation commitments. As the second most important greenhouse gas after carbon dioxide (CO2), CH4 is a key target of global climate initiatives due to its higher short-term global warming potential, enabling faster climate benefits from mitigation. In this context, UNEP’s International Methane Emissions Observatory (IMEO) aims to improve the accuracy of emission data from the oil and gas, waste, and coal sectors through targeted measurement studies to support mitigation activities.In autumn 2023, airborne observations of CH4 emissions from the O&G and waste sectors were performed for the first time on the Arabian Peninsula, namely in Oman, using the helicopter-towed probe HELiPOD. Equipped with instrumentation measuring the three-dimensional wind vector and in situ CH4 (Picarro G2401-m and LI-7700), repeated upwind and downwind measurements were conducted at varying horizontal distances (~1–5 km) and altitudes (~35–3000 m) to capture inflow conditions and the horizontal and vertical dispersion of CH4 plumes. Co-located mobile ground-based CH4 measurements complemented the airborne probing, with both datasets combined within a mass-balance approach to quantify emissions.Depending on the surveyed O&G emission source (point or clustered), calculated CH4 emission rates span a wide range from

  • Open Access

    Measurement report: Isotopic composition of CH 4 emitted from gas exploration sites in the Transylvanian Basin, Romania

    by Thomas Röckmann, Malika Menoud, Jacoline van Es, Carina van der Veen, Hossein Maazallahi, Pawel Jagoda, Jaroslav M. Necki, Jakub Bartyzel, Piotr Korben, Sara Defratyka, et al.

    Isotope measurements are increasingly used to constrain the methane (CH4) budget on various scales, from global to regional. The success of isotope-based source attribution depends to a large degree on the knowledge of the isotope signatures of the various source categories at the point of emission, but this information is in many cases lacking. Here we report the isotopic composition of CH4 emitted from 48 installations in the gas production region of Transylvania, Romania. The isotopic source signatures are quite homogeneous across the basin with average values of δ13C = (−65.6 ± 0.5 ‰) and δD = (−184 ± 1 ‰) confirming the predominantly biogenic origin of the Transylvanian gas, produced by hydrogenotrophic CO2 reduction. This is similar to values reported previously from natural seeps in Transylvania, to the natural gas exploited in the Dolj region in Southwestern Romania, and to the natural gas in the distribution grid in Cluj-Napoca. However, is more depleted in heavy isotopes than the oil-associated gas emitted in the Southern Romanian Plain, and gas leakages in the city of Bucharest. In addition, we present a step-by-step derivation of the underlying “Keeling plot” mass balance approach that is used to derive isotope source signatures.


  • Open Access

    Evaluating Pellistor sensors for reporting of methane emission in coal mine ventilation: Toward low-cost reporting solutions

    by Jarosław M. NęCki, Jakub Bartyzel, Paweł Jagoda, Justyna Swolkień, Nikodem Szlązak, Marek Korzec, Neil Butler, Łukasz Łukańko, Robert A. Field


  • Open Access

    A helicopter-based mass balance approach for quantifying methane emissions from industrial activities, applied for coal mine ventilation shafts in Poland

    by Eric Förster, Heidi Huntrieser, Michael Lichtenstern, Falk Pätzold, Lutz Bretschneider, Andreas Schlerf, Sven Bollmann, Astrid Lampert, Jarosław Nęcki, Paweł Jagoda, et al.

    This study introduces a helicopter-borne mass balance approach, utilizing the HELiPOD platform, to accurately quantify methane (CH4) emissions from coal mining activities. Compared to conventional research aircraft, the use of an external sling load configuration eliminates the need for aeronautical certifications, facilitates easier modifications and enables local helicopter companies to conduct flights. Furthermore, it allows for plume probing as close as several hundred meters downwind of an emission source and offers comprehensive vertical coverage from 50 m to 3 km altitude, making the HELiPOD an ideal tool to distinguish, capture, and quantify emissions from single sources in complex emission landscapes worldwide. Our approach serves as an independent emission verification tool, bridging the gap between ground-based, drone, near-field and far-field airborne measurements and supports identification of CH4 emission mitigation opportunities. Nineteen mission flights were conducted in the Upper Silesian Coal Basin of Southern Poland in June and October 2022 that targeted CH4 emissions from multiple coal mine ventilation shafts and several drainage stations. The comparison of top-down HELiPOD mass flux estimates against those calculated from bottom-up in-mine CH4 safety sensor and air flow measurements revealed very good agreement with relative deviations of 0 % to 25 %. This indicates, notwithstanding associated uncertainties, that the two independent approaches are capable of estimating CH4 emissions from coal mine ventilation shafts accurately. However, the accuracy and representativeness of derived in-mine data is application-specific and should be evaluated by independent measurements. With measured CH4 emission rates up to 3000 kg h−1 from individual coal mine ventilation shafts we confirm prior research, while revealing that emission strengths from drainage stations can be of comparable magnitude and should be investigated further. The possibility to detect emissions at rates as low as 20 kg h−1 with the HELiPOD was demonstrated through a controlled release experiment. This emphasises the wide range of potential applications in quantifying sources within a wide range of CH4 emission rates, i.e. from relatively small sources, e.g. biodigesters, landfills, cattle feedlots and manure pits to larger industrial sources including those from the coal, oil and gas sectors.


  • Open Access

    Comment on egusphere-2025-4461

    by Thomas Röckmann, Malika Menoud, Jacoline van Es, Carina van der Veen, Hossein Maazallahi, Pawel Jagoda, Jaroslav M. Necki, Jakub Bartyzel, Piotr Korben, Sara Defratyka, et al.

    Isotope measurements are increasingly used to constrain the methane budget on various scales, from global to regional. The success of isotope-based source attribution depends to a large degree on the knowledge of the isotope signatures of the various source categories at the point of emission, but this information is in many cases lacking. Here we report the isotopic composition of CH4 emitted from 48 installations in the gas production region of Transylvania, Romania. The isotopic source signatures are quite homogeneous across the basin with average values of δ13C = (-65.6 ± 0.5 ‰) and δD = (-184 ± 1 ‰) confirming the biogenic origin of the Transylvanian gas, produced by hydrogenotrophic CO2 reduction. This is similar to values reported previously from natural seeps in Transylvania, to the natural gas exploited in the Dolj region in Southwestern Romania, and to the natural gas in the distribution grid in Cluj-Napoca. However, is more depleted in heavy isotopes than the oil-associated gas emitted in the Southern Romanian Plain, and gas leakages in the city of Bucharest. In addition, we present a step-by-step derivation of the underlying "Keeling plot" mass balance approach that is used to derive isotope source signatures.

  • Open Access

    Comment on egusphere-2025-4461

    by Thomas Röckmann, Malika Menoud, Jacoline van Es, Carina van der Veen, Hossein Maazallahi, Pawel Jagoda, Jaroslav M. Necki, Jakub Bartyzel, Piotr Korben, Sara Defratyka, et al.

    Isotope measurements are increasingly used to constrain the methane budget on various scales, from global to regional. The success of isotope-based source attribution depends to a large degree on the knowledge of the isotope signatures of the various source categories at the point of emission, but this information is in many cases lacking. Here we report the isotopic composition of CH4 emitted from 48 installations in the gas production region of Transylvania, Romania. The isotopic source signatures are quite homogeneous across the basin with average values of δ13C = (-65.6 ± 0.5 ‰) and δD = (-184 ± 1 ‰) confirming the biogenic origin of the Transylvanian gas, produced by hydrogenotrophic CO2 reduction. This is similar to values reported previously from natural seeps in Transylvania, to the natural gas exploited in the Dolj region in Southwestern Romania, and to the natural gas in the distribution grid in Cluj-Napoca. However, is more depleted in heavy isotopes than the oil-associated gas emitted in the Southern Romanian Plain, and gas leakages in the city of Bucharest. In addition, we present a step-by-step derivation of the underlying "Keeling plot" mass balance approach that is used to derive isotope source signatures.

  • Open Access

    Measurement report: Isotopic composition of CH 4 emitted from gas exploration sites in the Transylvanian Basin, Romania

    by Thomas Röckmann, Malika Menoud, Jacoline van Es, Carina van der Veen, Hossein Maazallahi, Pawel Jagoda, Jaroslav M. Necki, Jakub Bartyzel, Piotr Korben, Sara Defratyka, et al.

    Isotope measurements are increasingly used to constrain the methane budget on various scales, from global to regional. The success of isotope-based source attribution depends to a large degree on the knowledge of the isotope signatures of the various source categories at the point of emission, but this information is in many cases lacking. Here we report the isotopic composition of CH4 emitted from 48 installations in the gas production region of Transylvania, Romania. The isotopic source signatures are quite homogeneous across the basin with average values of δ13C = (-65.6 ± 0.5 ‰) and δD = (-184 ± 1 ‰) confirming the biogenic origin of the Transylvanian gas, produced by hydrogenotrophic CO2 reduction. This is similar to values reported previously from natural seeps in Transylvania, to the natural gas exploited in the Dolj region in Southwestern Romania, and to the natural gas in the distribution grid in Cluj-Napoca. However, is more depleted in heavy isotopes than the oil-associated gas emitted in the Southern Romanian Plain, and gas leakages in the city of Bucharest. In addition, we present a step-by-step derivation of the underlying "Keeling plot" mass balance approach that is used to derive isotope source signatures.