PLPingli Liu

Pingli Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pingli Liu has a total of 103 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mesoporous Silica Microspheres in a Delayed Gel-Breaking System for High-Temperature Fracturing Fluid

    by Renyin Zhao, Pingli Liu, Chengwei Zuo, Juan Du, Xiang Chen, Yixiang Qu, Xin Zhang, Qisheng Huang

    In high-temperature fracturing operations, the rapid decomposition of strong oxidant breakers causes premature viscosity loss of fracturing fluids, severely impairing proppant placement. Currently, most delayed gel-breaking systems rely on polymeric shell materials to physically encapsulate oxidants. However, such polymer-based systems suffer from a dual failure mechanism at elevated temperatures: (i) the polymer shell softens and swells due to intensified thermal motion, losing its structural integrity; and (ii) the encapsulated strong oxidant (e.g., ammonium persulfate) aggressively attacks the polymer backbone, causing oxidative degradation of the shell material and accelerating burst release. These two synergistic effects render “polymer-encapsulated oxidants” fundamentally unworkable in high-temperature reservoirs. To radically overcome this material bottleneck, we propose for the first time a non-polymeric controlled-release strategy based on the synergistic effect of “inorganic mesoporous confinement and oil-phase isolation.” Rigid hollow mesoporous silica microspheres (HMSS) with nanoscale mesoporous shells are employed as inorganic structural carriers, which exhibit exceptional resistance to both high temperature and strong oxidants. APS is loaded via impregnation, followed by hydrophobic surface modification and dispersion in white oil to construct an emulsion-type release system. This system leverages the rigid silica skeleton for outstanding thermal and chemical stability, while the oil-phase interfacial barrier effectively prevents premature APS-aqueous contact. Results show that at 90 °C with 2.5 wt % hydrophobic particles, the cumulative release reaches 62% over 12 h, demonstrating excellent sustained-release characteristics. At 100 °C, the system extends the complete gel-breaking time to ∼8 h, which is 7 times longer (i.e., an 8-fold increase) than that of directly added APS. By completely abandoning organic polymer shellswhich are both thermally labile and susceptible to oxidative attackand instead employing inorganic mesoporous silica combined with an oil-phase barrier, this work fundamentally resolves the long-standing challenge of premature breaker release under high-temperature oxidizing conditions, offering a nanoscale carrier-based, structurally simple, highly robust, and precision-release paradigm for deep high-temperature reservoir stimulation.

  • Preparation of Ultratemperature-Resistant Cleaning Thickener and Research on the Mechanism of Acid Resistance

    by Juan Du, Xin Zhang, Chengwei Zuo, Pingli Liu, Bingyan Wen, Renyin Zhao, Yixiang Qu

    Acidizing systems are widely employed in the exploitation of carbonate reservoirs. However, the reaction kinetics of conventional hydrochloric acid are excessively rapid, and the penetration distance is limited. To address these issues, a purely cationic thickening polymer, ADDD, was designed and synthesized for ultrahigh-temperature reservoirs based on supramolecular interaction principles. The electrostatic repulsion between cationic groups alleviates the compression of the polymer’s electric double layer by H+, while the hydrophobic association structure imparts rigidity and thermal resistance to the polymer. The substitution of dimethyl diallyl ammonium chloride (DMDAAC) for the commonly used AMPS monomer further reinforces the polymer backbone, significantly enhancing its heat resistance, acid resistance, and compatibility with carbonate reservoirs. At 180 °C and a shear rate of 170 s–1, the viscosities of 15 and 20 wt % ADDD gelled acids stabilized at 40 mPa·s and 35 mPa·s, respectively, after 120 min of shear treatment. The gelled acid retained 45.83% of its viscosity after aging at 180 °C for 4 h. Its corrosion rate on P110SS was only 9.38 g/(m2·h), corresponding to 9.73% and 15.27% of the rates observed for hydrochloric acid and AE gelled acid at the same concentration, respectively. Under conditions of 180 °C and 300 rpm, the acid–rock reaction rate of ADDD gelled acid was reduced to merely 12.5% and 50.68% of those of hydrochloric acid and AE gelled acid, respectively. The residual acid exhibited a viscosity as low as 1 mPa·s, and no obvious precipitation was observed. After breaking with 0.05 wt % ammonium persulfate at 180 °C, the viscosity of the ADDD gelled acid dropped to 1.5 mPa·s. The conformational differences between ADDD and AE in acidic media were collaboratively elucidated through zeta potential measurements and dynamic light scattering (DLS) analysis. Molecular dynamics simulations combined with analyses of H+ diffusion coefficients, binding energies, and radial distribution functions revealed that hydrophobic association and cationic electrostatic effects synergistically enhance acid resistance and suppress acid–rock reaction rates. Meanwhile, electrostatic repulsion effectively prevented the incompatibility issues of the corrosion inhibitor that arise from amide thermal degradation under high-temperature conditions. The acid- and temperature-resistant thickener synthesized in this study provides technical and theoretical support for the development of ultrahigh-temperature carbonate reservoirs.


  • Bioinspired by Mussels: Construction of an Ultrasalt-Tolerant, Tunable-Viscosity Slickwater Fracturing Fluid for the Reuse of Deep Coalbed Methane Flowback Fluids

    by Pingli Liu, Chengwei Zuo, Juan Du, Jiahao Li, Xin Zhang, Renyin Zhao, Xiang Chen

    The extraction of deep coalbed methane (CBM) relies on high-rate, large-volume network fracturing. In water-scarce regions, recycling formation flowback fluids for fracturing fluid preparation is essential to reduce freshwater consumption. To address the performance degradation of fracturing fluids in high-salinity flowback water, a biomimetic salt-tolerant polymer friction reducer (ASD) was developed, inspired by the zwitterionic salt-resistance mechanism in mussels. By integrating hydrophobic association with the antipolyelectrolyte effect, the ASD-based slickwater maintains an apparent viscosity of ∼75 mPa·s in flowback water with total dissolved solids exceeding 120,000 mg/L. Experimental results demonstrate a maximum drag reduction rate of 79.58% and superior dynamic proppant transport. At 60 °C, the fluid completely breaks within 3 h, leaving a low residue of 310 mg/L. Mechanistically, particle size and zeta-potential analyses confirm that ASD exhibits a significant increase in hydrated radius (500–2000 nm) in saline solutions, far exceeding the 10–35 nm observed for conventional hydrolyzed polyacrylamide, validating its strong antipolyelectrolyte response. Molecular dynamics simulations further elucidate this structural adaptability in high salt solutions. This biomimetic strategy offers a high-performance, sustainable solution for deep CBM stimulation using hypersaline flowback water.

  • Open Access

    Application and Progress of Acidization Technology in Geothermal Development: A Review

    by Zhihan Yu, Pingli Liu, Chengwei Zuo, Juan Du, Xiang Chen, Jie Wang, Ligang Zhang

    As a sustainable alternative to fossil fuels, geothermal energy plays a critical role in the global shift toward carbon neutrality. However, the economic extraction of heat is frequently hindered by poor-reservoir permeability, often exacerbated by mineral scaling and particulate clogging during long-term operation. This review provides a comprehensive synthesis of acidization technologies, emphasizing their mechanisms for enhancing injectivity and productivity in diverse geothermal settings. This study scrutinizes the chemical interaction between varied acid systems ranging from conventional mineral acids to solid organic acid blends and the complex geological conditions of volcanic and sedimentary reservoirs. Furthermore, the paper delineates the evolution of geothermal energy development methods, such as matrix acidizing and hydraulic fracturing synergy (multi-stage acid fracturing), alongside metal corrosion inhibition and effluent scale treatment. By integrating empirical field data with theoretical geochemical modeling, this review provides an in-depth analysis of the acid fracturing mechanisms within coupled thermal–hydraulic–mechanical–chemical (THMC) fields. It further identifies the persistent challenges of high-temperature stability and deep-seated flow path diversion. Ultimately, this paper proposes a roadmap for next-generation “smart” acidizing fluids, aiming to provide a robust framework for optimizing geothermal heat mining and ensuring the longevity of enhanced geothermal systems.


  • Open Access

    Reservoir Stimulation in Soft Sedimentary Formations: Progress, Challenges and Geothermal Implications

    by Xiyi Luo, Pingli Liu, Juan Du, Liangbo Zhao, Jinming Liu, Wenhao Tian, Jinlong Li

    Soft sedimentary formations, including unconsolidated sandstones, low-strength carbonates, mixed sedimentary rocks and weakly cemented sedimentary geothermal reservoirs, are increasingly important targets for oil and gas production and mid- to deep geothermal development. Their stimulation is limited by poor natural connectivity and the weak stability of grains, pore–fracture boundaries and acid-etched channels. Flow channels created by hydraulic fracturing, acidizing or acid fracturing are prone to proppant embedment, fracture closure, wall weakening, fines migration and pore-throat plugging, causing conductivity loss during production, injection and reinjection.This review examines soft-formation stimulation from the perspective of the trade-off between channel creation and structural stability. The geological–mechanical characteristics and failure mechanisms of unconsolidated sandstones, low-strength carbonates and mixed sedimentary rocks are summarized. Permeability-enhancing stimulation, formation-stabilizing treatment and integrated permeability–stability stimulation are compared in terms of mechanisms, controlling factors and applicability limits. Representative oil and gas and geothermal cases are used to assess whether short-term production or injection improvement can be converted into long-term channel preservation.Existing studies show that stimulation of soft formations cannot be evaluated only by permeability gain, initial productivity or water yield. Permeability-enhancing treatments can improve connectivity but may accelerate wall damage, particle migration and conductivity decline. Stabilization treatments enhance local resistance to mechanical and flow-induced disturbance, but remain constrained by treatment depth, reaction-product distribution, pore-throat damage and thermal stability. Integrated permeability–stability stimulation is promising, but the coupling among channel formation, stabilization timing, reaction location and conductivity retention remains a key barrier to long-term stimulation design.

  • Synergy of novel solid inhibitor system on N80 steel in Maleic–NH 4 HF 2 acid: Experimental and theoretical study

    by Juan Du, Xiaotian He, Yaoshun Yuan, Zixuan Zuo, Pingli Liu, Xiang Chen, Zhongxuan Wang, Zhaoxu Deng

    This study presents a systematic investigation into the design, optimization and mechanism of high-performance solid inhibitors for low-carbon steel in a high-temperature maleic-acid (ML)–ammonium hydrogen fluoride (FRC) solid mud-acid system. Multiple approaches were used, including weight-loss tests, controlled-variable method, orthogonal response surface methodology, electrochemical analysis, SEM–EDS characterization, and molecular-dynamics (MD) simulations. The results show that, at 120 °C in a 17% ML + 1.5% FRC solution, a composite inhibitor with the composition hexamethylenetetramine (HMTA):potassium iodide (KI):sulfonate (HS):tetradecyltrimethylammonium chloride (JA) = 0.5%:0.3%:0.25%:0.3% reduces the corrosion rate of N80 steel to 1.98 g/m 2 ·h and achieves an inhibition efficiency of 99.44%, meeting relevant industry requirements. Electrochemical data, SEM–EDS analyses and MD simulations jointly indicate that promoters addition lowered steric hindrance among HMTA molecules and increased the density of the adsorption film at the interface; a complex, compact adsorption layer composed of HMTA, promoter molecules and ML-species forms on the steel surface and suppresses corrosion processes. The combined experimental and theoretical evidence demonstrates effective metal protection and provides a novel solid corrosion inhibition system with sufficient potential for ML–FRC acidification.


  • Visual Laboratory Tests Effect of Operational Parameters on Dandelion-Based Bionic Proppant Transport in a Hydraulic Fracture with Rough Surfaces

    by Jun Li, Siyuan He, Mingyi Wu, Pingli Liu

    Summary: The higher packing height and efficient placement and transportation of proppants in deep shale fractures determine the later oil and gas production. However, as the depth of the shale formation increases and the temperature rises, the viscosity of the fracturing fluid decreases significantly. Achieving efficient transport of low-viscosity liquids carrying proppants has long been an urgent issue that needs to be addressed in developing deep shale gas reservoirs. Based on previous research, it has been proved that a dandelion-structured proppant can solve the above problems. However, the key operational factors influencing dandelion-based bionic proppant placement remain unclear. For this study, we built a rough surface of the shale vertical fracture model and conducted laboratory tests on the dandelion-based bionic proppant transportation and distribution under different key factors. The experimental results show for the first time that compared with the piling-up mechanism of conventional proppants (spherical shaped proppant), the dandelion-based bionic proppant forms an upper and lower packing shape. In addition, the lower-viscosity fluid with a higher injection rate carrying dandelion-based bionic proppant of smaller size and higher concentration can form a large packing area in the top/bottom location of the shale fracture.


  • Open Access

    Enhancing Wormhole Formation Efficiency in Carbonate Acidizing through Mitigation of CO2-Induced Multiphase Flow Effects

    by Juan Du, Xiyi Luo, Pingli Liu, Jinlong Li, Jinming Liu, Wenhao Tian, Liangbo Zhao

    Within the framework of carbon capture, utilization, and storage (CCUS), the generation, migration, and phase behavior of CO₂ in porous media play a critical role in governing multiphase flow stability and mass-transfer efficiency. Similar CO₂ multiphase flow phenomena are also ubiquitous during acidizing treatments in deep carbonate reservoirs, where rapid CO₂ generation is frequently associated with simplified wormhole morphology, limited stimulated volume, and premature breakthrough. However, the mechanistic role of CO₂ generation and phase behavior during acid–rock reactions in controlling flow-path selection and wormhole evolution remains insufficiently understood.To address this knowledge gap, this study proposes a mechanistic strategy to enhance wormhole formation efficiency during carbonate acidizing by mitigating CO₂-induced gas–liquid two-phase flow and its associated capillary resistance. A two-stage acidizing approach is developed, in which a chelating-agent system is first applied to construct a stable microfracture network and multichannel flow pathways, thereby reducing local reaction intensity and weakening capillary resistance induced by rapid CO₂ generation. This is followed by strong-acid injection to promote the development of complex wormhole structures under more uniform flow conditions.Core-scale flow experiments combined with microfluidic visualization systematically investigate, from the macroscopic to pore scale, the effects of CO₂ generation rate and phase behavior on pressure response, flow-path selection, and wormhole morphology. The results demonstrate that rapid CO₂ generation intensifies pressure fluctuations and induces premature breakthrough, whereas mitigating CO₂ interference enhances flow stability and promotes wormhole branching and networked development.

  • Open Access

    Study on buffer acid systems for acid fracturing in ultra-high temperature carbonate reservoirs

    by Juan Du, Wenhao Tian, Qi Zou, Pingli Liu, Yiquan Shi, Jinming Liu, Xiang Chen, Jinlong Li, Yaochen Li

    At 200 °C, conventional acids for carbonate stimulation exhibit excessively fast acid–rock reactions and severe corrosivity, limiting their use in ultra-high temperature acid fracturing. This study aims to develop a buffering acid system with high thermal stability, controllable reactivity, and reduced corrosion. Dissolution and corrosion experiments were conducted to compare hydrochloric–formic and hydrochloric–acetic acid systems at various concentrations under 200 °C conditions. A suitable buffering formulation was then identified and further evaluated through reaction kinetics tests, long-duration dissolution, and extended fracture-etching experiments. Molecular simulations were also performed to clarify the buffering mechanism.Results show that a system containing 15 % HCl and 6 % formic acid is most suitable for acid fracturing at 200 °C. Its dissolution capacity reached 96.32 % of that of 20 % HCl, while the corrosion rate on 110SS steel was 68.1339 g/(m²·h), meeting industry standards. The reaction rate was only 76.90 % of that of hydrochloric acid at the same concentration, demonstrating effective retardation. The apparent activation energy was 36.19 kJ/mol, significantly higher than that of HCl, indicating slower H⁺ release and enhanced buffering behavior.Etching morphology analysis revealed that this buffering acid achieved stronger etching than weak acids (e.g., formic acid) and a longer effective penetration distance than strong acids (e.g., HCl). Unlike pure hydrochloric acid, the HCl–formic acid system exhibits a stable pH buffering range of 2.82–4.74. The interaction between formate ions and hydrogen ions reduces H⁺ diffusion and consumption, thereby extending the acid’s reactive distance within the fracture network.

  • Top Cited Papers

    A Review of Wax Deposition in Waxy Crude Oil Pipelines: Recent Advances and Future Perspectives

    by Pingli Liu, Jiashun Li, Xiang Chen, Juan Du, Qisheng Huang, Chengwei Zuo, Hongming Tang, Zhongxuan Wang, Rui Wang