Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andressa da Silva Barboza has a total of 83 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Analysis of the Mechanical and Biofilm Surface Formation of 3D Printed Resins and Milled PMMA Blocks With and Without Inorganic Fillers

    by Indyara Cerutti, Juliana S. R. de Andrade, Andressa da Silva Barboza, Jaqueline B. Machado, Dewey Du‐Hyeong Lee, Mateus Bertolini Fernandes dos Santos

    Objectives: Despite the growing number of studies assessing the performance of temporary restorative materials fabricated through CAD/CAM technologies, comparative analyses among 3D printed resins and milled PMMA blocks with differing compositions remain limited. This study compared mechanical and biofilm surface formation of 3D printed resins PMMA blocks with different compositions, using composite resin as control. Material and Methods: Bar‑shaped (25 × 2 × 2 mm) and disc‑shaped (6 × 2 mm) specimens were fabricated. Flexural strength was evaluated by three‑point bending (ISO 4049), and Vickers microhardness was recorded. Multispecies biofilm formation was quantified using CFU/mL and examined morphologically via SEM. Statistical significance was set at α = 0.05. Results: The 3D printed resins and milled hybrid PMMA showed the lowest flexural strength, with no significant differences between them, while the composite resin achieved the highest and statistically superior values ( p < 0.001). 3D printed resin without inorganic fillers showed the lowest Vickers microhardness values (12.66 ± 0.83 HK) while 3D printed resin with inorganic fillers (15.20 ± 1.94 HK) and milled conventional PMMA (16.03 ± 1.35 HK) exhibited higher values. However, none of them differed statistically from the 3D printed resin without inorganic fillers ( p = 0.064). Conversely, milled hybrid PMMA (16.67 ± 2.10 HK) demonstrated significantly higher Vickers microhardness than 3 d printed resin with inorganic fillers ( p < 0.001). Biofilm formation ranged from 2.26 × 10 7 to 2.82 × 10 7 CFU/mL, with no significant differences among materials ( p > 0.05). Conclusions: Milled and 3D printed materials demonstrated comparable mechanical behavior while composite resin remained the performance benchmark. Material selection for provisional restorations should account for mechanical behavior and biological interactions, as surface treatment and clinical conditions may influence microbial colonization.


  • Open Access

    Animal models in gunshot injury studies: A scoping review of model selection and quality assessment in ballistic research

    by Andressa da Silva Barboza, Larissa Moreira Wohlfeil, Mohammed Irfan, Andressa Goicochea Moreira, Juliana Silva Ribeiro de Andrade, Otacílio Luiz Chagas Júnior, Sinval Rodrigues-Junior, Rafael Guerra Lund

    This scoping review aimed to identify the experimental models used to simulate gunshot injuries, assess the quality of the available evidence, and discuss their implications for forensic practice. A comprehensive literature search was conducted across seven databases (PubMed/MEDLINE, Embase, Web of Science, Scopus, Cochrane, Google Scholar, and the Virtual Health Library) up to January 2026. Eligibility criteria included studies employing animal models and tissue surrogates to investigate gunshot injuries, with no restrictions on publication date or language. Following the PRISMA-ScR guidelines, data charting methods involved extracting study characteristics, types of animal models or simulants utilized, experimental objectives, and methodological reporting quality, which were subsequently qualitatively synthesized. Of the 29 full-text articles assessed for eligibility, 26 studies were included in the final analysis. The predominant models utilized were porcine and bovine tissues, which successfully reproduced key morphological features of gunshot wounds. However, recurrent methodological limitations and high heterogeneity were identified across the literature. Notably, only one of the included studies adhered to standardized reporting frameworks such as the ARRIVE guidelines. While animal models are highly valuable for understanding projectile–tissue interactions and wound morphology, the current methodological variability compromises the interpretation and reconstruction of forensic ballistic events. The development and consistent application of appropriate guidelines are essential to enhance the reliability, reproducibility, and forensic applicability of experimental ballistic studies. Key points.


  • Open Access

    Masking of Silver Diamine Fluoride-stained carious dentin with restorative materials: an in vitro study

    by Julia Maldonado Garcia, Isabela Ramos, Andressa da Silva Barboza, Aurélio de Oliveira Rocha, Mariane Cardoso, Juliana Silva Ribeiro de Andrade, Carla Miranda Santana

    Evaluate the masking capacity of different restorative materials upon carious dentin stained with 38% Silver Diamine Fluoride and Potassium Iodide (SDF+KI). Bovine tooth discs (n=30) were prepared and sterilized. Streptococcus mutans biofilms were cultured on bovine dentin for up to 14 days to induce carious lesions. SDF+KI was applied. Samples were randomized into three groups (n=10) according to the restorative materials: resin composite (RC), Glass Ionomer Cement (GIC), and Opacifying Resin pink opaque (PO). To evaluate the masking capacity, each tooth was covered with a disc of material, as follows: Group 1 (RC), 2 mm of RC; Group 2 (GICRC), 1 mm of GIC and RC; Group 3 (PORC), 1 mm of OP and RC. The L*a*b components were measured using VITA Easyshade® for each restorative material disc (T0) and for the material overlay on the SDF+KI-stained tooth disc after 12 hours (T1) and 1 month (T2). The color difference (ΔE00) was measured using the CIEDE2000 equation. Kruskal-Wallis and Wilcoxon tests were performed. At T1, all groups were different, with greater masking in PORC (ΔE00=3.04). T2, GICRC (ΔE00=3.38) and PORC (ΔE00=2.72) did not differ from each other, while RC (ΔE00=5.97) presented worse masking. ΔE00 decreased over time for all groups (p<0.05). All restorative approaches resulted in clinically unacceptable discoloration; however, GICRC or PORC improved masking compared with RC alone. The color of discs placed immediately after SDF may change over time. Future studies may investigate more opaque materials and alternative material combinations in masking of SDF-stained dentin.

  • Open Access

    Novel Acrylic Bone Cement Containing Graphene Oxide: Synthesis and Characterization

    by Luiz Fabiano Gomes Gularte, Guilherme Kurz Maron, Camila Perelló Ferrúa, Andressa da Silva Barboza, Tiago Fernandez Garcia, Geovanna Peter Correa, Cainá Corrêa Do Amaral, Bruna Godinho Corrêa, Chiara das Dores Do Nascimento, Everton Granemann Souza, et al.

    Polymethylmethacrylate (PMMA) bone cement is widely used in orthopedics, accounting for approximately 80% of knee joint replacements in the United States. While prosthesis designs and materials have evolved to improve performance and durability, PMMA cement has undergone minimal compositional changes. Carbon-based nanomaterials, particularly graphene oxide (GO), have attracted interest for their ability to enhance the mechanical and thermal properties of orthopedic cements. This study evaluated the effects of incorporating different GO concentrations into PMMA bone cement on its mechanical properties, cytocompatibility, and antibacterial activity. PMMA was modified with GO at 0.1, 0.25, and 0.5 weight percent (wt%) for mechanical and antibacterial tests, and at 1.0 wt% for cytocompatibility. Mechanical performance was assessed via four-point bending tests. Cytocompatibility was evaluated using mouse embryonic fibroblasts (NIH/3T3), and antibacterial activity was tested against Staphylococcus aureus using a modified direct contact assay. GO incorporation significantly increased Young’s modulus (0.1% and 0.25%, p = 0.009) and improved tensile strength (p = 0.0015) and flexural strength (p = 0.025) at 0.1%. Cytocompatibility remained comparable to the control (p = 0.873). Antibacterial activity was concentration dependent, with 0.25% and 0.5% GO maintaining significant bacterial inhibition up to 48 h, whereas 0.1% showed no sustained effect. Overall, 0.25 wt% GO provided the most suitable balance between mechanical integrity and antibacterial performance, indicating that PMMA–GO bone cements with this composition can combine enhanced mechanical properties with relevant antibacterial activity without compromising biocompatibility, and are therefore promising candidates for orthopedic applications.


  • Open Access

    Bacterial Nanocellulose Functionalized with Graphite and Niobium Pentoxide: Limited Antimicrobial Effects and Preserved Cytocompatibility

    by Juliana Silva Ribeiro de Andrade, Adriana Poli Castilho Dugaich, Andressa da Silva Barboza, Maurício Malheiros Badaró, Pedro Henrique Santaliestra e Silva, Tiago Moreira Bastos Campos, Karina Cesca, Debora de Oliveira, Sheila Cristina Stolf, Rafael Guerra Lund

    Chronic wounds remain locked in persistent inflammation with high microbial burden, demanding dressings that suppress infection without sacrificing biocompatibility. Bacterial nanocellulose (BNC) is an attractive matrix due to its biocompatibility, nanofibrillar architecture, and moisture retention, but it lacks antimicrobial activity. Here, we engineer BNC membranes post-functionalized with functionalized graphite (f-Gr; predominantly graphitic with residual surface groups) and/or niobium pentoxide (Nb2O5), and evaluate four groups: BNC (matrix control), BNC/Nb2O5, BNC/f-Gr, and BNC/f-Gr/Nb2O5. Physicochemical analyses (Raman and Voigt fitting, FTIR-ATR, XRD, and SEM) confirm a graphitic carbon phase and physical incorporation of the modifiers into the BNC network, with a noticeable shift in the hydration/polarity profile—more evident in the presence of f-Gr. In standardized microbiological assays, BNC/f-Gr promoted a moderate, contact-dependent reduction in bacterial proliferation, particularly against Staphylococcus aureus, whereas BNC/Nb2O5 behaved similarly to pristine BNC under the tested conditions. The combined f-Gr/Nb2O5 formulation showed an intermediate antimicrobial response, with no clear synergy beyond f-Gr alone. Cytotoxicity assays indicated cytocompatibility for BNC, BNC/f-Gr, and BNC/Nb2O5; the combined group displayed a slight reduction that remained within acceptable limits. Overall, BNC/f-Gr emerges as the most promising antimicrobial dressing, while Nb2O5 did not significantly enhance antimicrobial performance under the tested conditions and warrants further optimization regarding loading and distribution.

  • Open Access

    Sustainable Valorization of Mussel Shell Waste: Processing for Calcium Carbonate Recovery and Hydroxyapatite Production

    by Adriana Poli Castilho Dugaich, Andressa da Silva Barboza, Marianna Gimenes e Silva, Andressa Baptista Nörnberg, Marcelo Maraschin, Maurício Malheiros Badaró, Daiara Floriano da Silva, Carlos Eduardo Maduro de Campos, Carolina dos Santos Santinoni, Sheila Cristina Stolf, et al.

    This study aimed to develop a sustainable route for processing biogenic calcium carbonate from Perna perna mussel shell waste and converting it into hydroxyapatite (HA), as well as to evaluate its potential for bone and dental tissue engineering applications. Mussel shells were decarbonized (400 °C), milled, and converted to HA via wet chemical precipitation using a nominal Ca/P molar ratio of 1.67 during synthesis followed by thermal treatment (900 °C). Comprehensive characterization included SEM, FTIR, XRD, Raman spectroscopy, XRF, TGA, and BET analysis. Biological evaluation involved cytotoxicity assays (MTT), antimicrobial testing, and odontogenic differentiation studies (Alizarin Red) using SHEDs. Statistical analysis by one-way ANOVA and Tukey post hoc tests (α = 0.05). SEM revealed a microstructured morphology composed of agglomerates, favorable for biomedical applications. FTIR and XRD confirmed the conversion of CaCO3 to hydroxyapatite, while thermal analysis demonstrated the material’s stability. The HA exhibited secondary minor phase (13%) β-TCP form of calcium phosphate (Ca2.997H0.006(PO4)2), high crystallinity (about 80%), and nanoscale crystallite size (85 nm, 2.5–5.0 m2/g), despite forming larger agglomerates in suspension. The material showed favorable physicochemical properties (neutral pH, −18.5 mV zeta potential), but no inhibition was detected in antimicrobial testing. In vitro assays showed excellent cytocompatibility (viability > 70% at 12.5 µg/mL) and significant osteogenic potential (high mineralization vs. controls, p < 0.05). Mussel shell-derived HA presents a sustainable, clinically relevant biomaterial with ideal properties for bone regeneration. The study establishes a complete waste-to-biomaterial pipeline while addressing key requirements for dental and orthopedic applications.


  • Open Access

    Chlorhexidine in endodontics: a bibliometric analysis of the top 100 most-cited articles

    by Christiane Cabral Leite, Aurélio de Oliveira Rocha, Mariane Cardoso, Bruno Henriques, Andressa da Silva Barboza, Daniele Cristina Alves Rigo, Gabriela Beatriz Rigo Wietzkoski, Daniele Março de Souza Rocha, Natalia de Oliveira Miranda, Lucas Menezes dos Anjos

    Introduction: This review aimed to analyze the scientific profile of the 100 most-cited articles on the use of chlorhexidine (CHX) in endodontics. Methodology: A bibliographic search was carried out using the Web of Science Core-Collection (WoSCC) database until September 2023. The collected data include the number and density of citations, authorship, year and periodical of publication, study design and theme, keywords, institution, and country of origin. Spearman's correlation was used to determine the correlation between the citation numbers from different databases and impact factors. VOSviewer software was used to generate collaborative network maps for authors and keywords. Results: The number of citations ranged from 65 to 953, and articles were published between 1993 and 2022. The most frequent study designs and themes were laboratory-based studies (14%) and endodontic irrigants (69%), respectively. Gomes BPFA (13%) and Haapasalo M (12%) were the authors with the largest number of articles. The countries with the most articles were Brazil (27%) and the United States (18%). Campinas State University (12%) and Estacio de Sá University (8%), both in Brazil, were the institutions with the most articles. Positive correlations were found between the number of citations in the three databases. Conclusion: The 100 most-cited articles related to the use of chlorhexidine in endodontics were mainly published in Brazil, focusing on laboratory-based studies related to the use of chlorhexidine as an irrigating solution.

  • Is there a direct relationship between the cost and effectiveness of local anesthetics in lower molars with irreversible pulpitis? Systematic review, meta-analysis and cost-effectiveness evaluation

    by Luísa Figueredo de Carvalho, Adriana Poli Castilho Dugaich, Alexandra Maria de Melo Schiefler, Letícia Cristine Ramos Ribeiro, Andressa da Silva Barboza, Sheila Cristina Stolf, Rafael Guerra Lund, Juliana Silva Ribeiro de Andrade


  • Development and characterization of nanofibrous scaffolds for guided periodontal regeneration using recycled mussel shell-derived nano-hydroxyapatite

    by Andressa da Silva Barboza, Adriana Poli Castilho Dugaich, Andressa Baptista Nörnberg, Stephen Christina de Moraes, Marcia Adriana Tomaz Santana, Daiara Floriano da Silva, Carlos Eduardo Maduro de Campos, Rafael Guerra Lund, Juliana Silva Ribeiro de Andrade


  • Open Access

    Calcium carbonate in dentistry: a bibliometric review of emerging applications and trends

    by Andressa da Silva Barboza, Samira Schons de Oliveira, Adriana Poli Castilho Dugaich, Maurício Malheiros Badaró, Ana Paula Varela Brown Martins, Rafael Guerra Lund, Sheila Cristina Stolf, Juliana Silva Ribeiro de Andrade

    Calcium carbonate (CaCO₃) has garnered increasing attention in dental research due to its versatile bioactive properties and expanding applications in preventive, restorative, and regenerative therapies. Objective This study aims to comprehensively assess the bibliometric features of articles evaluating the utilization of calcium carbonate (CaCO₃) in dentistry by conducting a bibliographic search on the Web of Science databases until March 2025. Methodology The following data were collected: number and density of citations; authorship; year, journal of publication, and impact factor; study design and theme; keywords; institution and country of origin. VOSviewer software was used to generate collaborative network maps for authors and keywords. Results A total of 91 highly cited articles were identified, with citation counts ranging from 123 to zero. Most articles (74%) were published after 2010, with the highest prevalence in Asia (44%), especially China (10%). The most frequent study design was in vitro (55%), primarily focused on restorative dentistry (29%) and cariology (23%). The most common keywords were “Calcium Carbonate” and “Hydroxyapatite”. DeVizio W. was the most prolific author, with four publications. Conclusions Bibliometric analysis highlights a growing interest in the application of calcium carbonate in dentistry, with a progressive increase in scientific output over the years. The findings underscore the global distribution of research and emphasize the relevance of this biomaterial in various dental specialties. This study reinforces several key points for research groups worldwide engaged in the development of innovative dental materials, providing valuable direction for future investigations, which remain limited in scope, especially regarding clinical applications and long-term outcomes.