GKGregory Kozhushko

Gregory Kozhushko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gregory Kozhushko has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessment of energy efficiency and environmental performance of led light sources by the ecodesign methods

    by Vasyl Nazarenko, Viktor Sorokin, Demyd Pekur, Svitlana Shpak, Iuliia Basova, Sabir Baghirov, Gregory Kozhushko

    The object of the study is the processes and factors that determine the energy efficiency and environmental friendliness of LED light sources and contribute to reducing negative impacts on the environment and human health. The work investigated the levels of energy efficiency and environmental friendliness of commercial samples of LED luminaires for compliance with the requirements of the EU Commission Regulations on Energy Labeling No. 2019/2015 and on Ecodesign No. 2019/2020. The network efficiency coefficient hTM (lm/W) was taken as the energy efficiency criterion. The main environmental friendliness criteria: the limit level of flicker luminance PstLM and the visibility of the stroboscopic effect SVM are established by the EU Commission Regulation No. 2019/2020; the limit level of blue light hazard should not exceed the risk group RG1 according to EN 62471:2018; the limit levels of the Unified Glare Rating UGR according to ISO 8995-1:2025. LED luminaires using high-power LEDs have a hTM coefficient of 135–170 lm/W and comply with energy efficiency classes D and C according to Commission Regulation EU No. 2019/2015. The hTM coefficient of luminaires with low-power LEDs is 100 lm/W, energy efficiency class F. Luminaires with low-power LEDs correspond to the RG0 risk group in terms of blue light safety, and luminaires with high-power LEDs correspond to the RG1 risk group. All tested luminaires meet the requirements of Commission Regulation EU No. 2019/2020 in terms of flicker luminance and visibility of the stroboscopic effect (PstLM < 1, SVM < 0.4). Light exceeding the established limit values for these indicators has a negative impact on health and can be classified as light pollution. Light sources have the greatest impact on the environment as a result of the consumption of electrical energy


  • Open Access

    Photobiological safety of household led projectors

    by Sabir Baghіrov, Oleksandr Pitiakov, Svitlana Kyslytsia, Viktor Kharchenko, Svitlana Shpak, Gregory Kozhushko

    The article discusses the influence of LED projector radiation indicators on photobiological and thermal hazards to the human body. The obtained results of the levels of visible radiation of the optical spectrum and the thermal effect of image spotlights intended for use in domestic conditions are presented. The dependences of the energy brightness on the harmfulness function of the spectrum of visible radiation, on the ratio of the field of view angle γ and the solid angle of the light source α, as well as on the measurement distance have been established. It has been shown that when the distance from the observer to the projector increases by more than 1.25 m, the radiation from projectors does not pose any danger and corresponds to the risk group RG0. At a distance of up to one meter from the projector (the range where the degree of visible radiation of the optical spectrum is regulated), the type of light source studied is classified as low hazard RG1 and meets the established requirements of the standard. When the observation range is up to 0.3 m, the level of influence of the danger of visible radiation the optical spectrum increases to the second category. At a distance of 1 m, the luminance LR is almost three orders of magnitude lower than the limit value, and at a distance of 0.5 m, LR is also significantly lower than the limit values. For the closest distance of 0.2 m, the LR level is below the LR limit values for the average risk group RG2 and the level of thermal hazard created by optical radiation with wavelengths of 380‒1400 nm does not exceed the norm for the studied projectors. Conclusions are drawn about the compliance of the studied low‒ power image projectors with the blue light safety conditions established by the international standard

  • Light pollution from led lighting systems and ways of reducing its environmental consequences

    by T.V. Sakhno, G.M. Kozhushko, V.I. Nazarenko

    Light pollution from led lighting systems and ways of reducing its environmental consequences: ISSN 2223-6775 Ukrainian journal of occupational health Vol.20, No 2, 2024https://doi.org/10.33573/ujoh2024.02 Light pollution from led lighting systems and ways of reducing its environmental consequences Sakhno T.V.1 , Kozhushko G.M.2, Nazarenko V.I.31 P


  • The Current State of Energy Efficiency and Light Quality of Led Products

    by Svitlana Kyslytsia, Grygoriy Kozhushko, Oleksandr Shefer, Svitlana Shpak, Kanan Hasanov

  • КОРИГУВАННЯ СПЕКТРІВ ВИПРОМІНЕННЯ СВІТЛОДІОДНИХ ОСВІТЛЮВАЛЬНИХ УСТАНОВОК ДЛЯ ПІДВИЩЕННЯ ЇХ ФОТОБІОЛОГІЧНОЇ БЕЗПЕЧНОСТІ

    by О.с. Пітяков, П.і. Неєжмаков, С.в. Шпак, С.г. Кислиця, Г.м. Кожушко

    Proceedings of the XXX International Scientific and Practical Conference:International Trends in Science and TechnologyFields of Science: Engineering and MedicineCompany - Scholarly Publisher RS Global Sp. z O.O.Location - Warsaw, PolandDate - 30.06.2021

  • Open Access

    DIRECTIONS FOR IMPROVEMENT OF STANDARDS ON LED TECHNIQUE AND LIGHTING WITH ITS USE

    by S. Shpak, V. Martirosova, T. Sakhno, G. Kozhushko

    One of the main tasks of high-quality lighting is to provide comfortable visual work and adequate perception of illuminated objects by obtaining light with a wide range of correlated color temperatures with high color rendering quality. The paper analyzes the shortcomings of national regulatory documents on establishing tolerances for the color of lamps and fixtures using LEDs and evaluating their quality in color reproduction. Instead of using Mac Adam ellipses on the SIE 1931 (x, y) color chart for establishing the color requirements it is recommended to use circles on the 1976 SIE (u ', v'), and evaluate the color rendering quality using the CRI method, additionally apply the CQS and TM 30-18 methods. Due to the fact that the spatial color of LED luminaires can be inhomogeneous, it is recommended to indicate both the average color and color in a certain direction, as well as an indicator of the color heterogeneity. The necessity of developing standards for protection against unwanted non-visual biological effects, as well as other negative effects of artificial light, in particular, excessive brightness, pulsation of the light flux, photobiological hazards, etc., is substantiated. Considering the importance of the influence of light pulsation on the quality of lighting, before the development of CIE or IEC standards, it is recommended that national standards for LED lamps and luminaires include the requirements for description of pulsation parameters and measurement methods in accordance with the recommendations of IEEE 1789-2015 standard, which is the most advanced today. For the design of ergonomic lighting, it is proposed to provide information on lamps and luminaires related to their maximum brightness. When developing new criteria for lighting, taking into account the visual impact, it is already possible to use the knowledge accumulated by this time, in particular, for creation of biologically active and biologically dimmed light by changing the spectral composition of radiation and illumination. Proposals related to the limits of the correlated colour temperature, brightness, level of pulsation for lighting of children and educational institutions, residential premises and the like are also considered. Recommendations on the development of new national standards of Ukraine harmonized with international ones are also provided. Keywords: сolor rendering index, percent flicker, correlated colour temperature, illumination, photobiological safety