Robert Eberlein
Research Subjects
Robert Eberlein has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Claus Wrana
2 shared publicationsAndreas Schönenberger
Institute of Mechanical Systems, Zurich University of Applied Sciences, Winterthur, Switzerland
1 shared publicationAndré Zahnd
1 shared publication- Christian Jenni
Institute of Energy Systems and Fluid Engineering (IEFE), Zurich University of Applied Sciences (ZHAW), Winterthur, Switzerland
1 shared publication - Claus Wrana
3rd18 Polymer & Elastomer Consulting
1 shared publication Flurin Guyer
1 shared publication
Latest Publications
- 2 November 2026
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
Surrogate Model for Rubber Spring and Damping Elements Based on High-fidelity Simulations of Cyclically Loaded Vulcanizates
This paper presents a surrogate modeling approach for predicting the cyclic stiffness characteristics of rubber spring and damping elements (RSDE) used in vibration isolation systems. The methodology is based on high-fidelity finite element (FE) simulations that incorporate geometry-dependent assembly effects and advanced material modeling of filled vulcanizates subjected to cyclic loading. The constitutive framework combines the Modified Extended Tube Model (METM) with Advanced Mullins Damage Modeling (AMDM), providing a physically motivated description of hyperelasticity, stress softening, and steady-state hysteretic behavior. The resulting three-dimensional FE implementation was realized as an Abaqus user material subroutine and validated against experimental measurements of commercial RSDEs. Simulated torque-angle characteristics showed excellent agreement with experiments, with peak torque deviations below ±3%. To enable rapid engineering predictions, a parameterized FE model covering representative RSDE geometries was used to generate a design-of-experiments dataset. The simulated loading characteristics were condensed into three physically interpretable parameters describing cyclic stiffness behavior and subsequently approximated using multi-linear response surface regression models. The surrogate model links six geometric design variables to the non-linear torque-angle response, achieving high predictive accuracy with adjusted coefficients of determination R2adj up to 0.977. Analysis of the regression model reveals the influence of rubber cord dimensions and profile geometry on stiffness evolution under torsional loading. Comparison with independent test cases demonstrates that the surrogate model reliably reproduces FE predictions within the considered design space. The proposed surrogate model enables real-time estimation of geometry- and material-dependent cyclic stiffness characteristics, supporting efficient design and optimization of customized RSDE applications without testing.
- 2 November 2026
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
Surrogate Model for Rubber Spring and Damping Elements Based on High-fidelity Simulations of Cyclically Loaded Vulcanizates
This paper presents a surrogate modeling approach for predicting the cyclic stiffness characteristics of rubber spring and damping elements (RSDE) used in vibration isolation systems. The methodology is based on high-fidelity finite element (FE) simulations that incorporate geometry-dependent assembly effects and advanced material modeling of filled vulcanizates subjected to cyclic loading. The constitutive framework combines the Modified Extended Tube Model (METM) with Advanced Mullins Damage Modeling (AMDM), providing a physically motivated description of hyperelasticity, stress softening, and steady-state hysteretic behavior. The resulting three-dimensional FE implementation was realized as an Abaqus user material subroutine and validated against experimental measurements of commercial RSDEs. Simulated torque-angle characteristics showed excellent agreement with experiments, with peak torque deviations below ±3%. To enable rapid engineering predictions, a parameterized FE model covering representative RSDE geometries was used to generate a design-of-experiments dataset. The simulated loading characteristics were condensed into three physically interpretable parameters describing cyclic stiffness behavior and subsequently approximated using multi-linear response surface regression models. The surrogate model links six geometric design variables to the non-linear torque-angle response, achieving high predictive accuracy with adjusted coefficients of determination R2adj up to 0.977. Analysis of the regression model reveals the influence of rubber cord dimensions and profile geometry on stiffness evolution under torsional loading. Comparison with independent test cases demonstrates that the surrogate model reliably reproduces FE predictions within the considered design space. The proposed surrogate model enables real-time estimation of geometry- and material-dependent cyclic stiffness characteristics, supporting efficient design and optimization of customized RSDE applications without testing.
- Open Access
- 6 June 2025
- Published by Elsevier in International Journal of Non-Linear Mechanics
- Vol. 178
Non-linear finite element damage modeling after multiple cyclic loading of rubberlike materials
- 6 June 2025
- Published by Elsevier in International Journal of Non-Linear Mechanics
- Vol. 178
Open AccessNon-linear finite element damage modeling after multiple cyclic loading of rubberlike materials
- 1 January 2025
- Published by Rubber Division, ACS in Rubber Chemistry and Technology
- Vol. 98 (1) , 124-141
ADVANCED MULLINS DAMAGE MODELING AFTER MULTIPLE CYCLIC LOADING IN VULCANIZATES. PART 1: THEORY AND PARAMETER IDENTIFICATION
This study explores the deformation behavior of carbon black–filled elastomeric components under multiple cyclic loading conditions. Understanding the effects of repeated cyclic deformation is crucial for accurate finite element method simulations. We present an approach that captures both initial and subsequent cycles, converging to an equilibrium state. Experimental evidence from cyclic deformation and relaxation tests indicates that an equilibrium state is achieved within five deformation cycles. Our method analytically describes the relaxed or equilibrium state after multiple cyclic deformations by combining a relaxation model with a material model. We used a combination of a relaxation approach and the modified extended tube model (METM), allowing us to distinguish between polymer network effects and filler properties, thereby establishing a direct correlation between elastomer parameters and mechanical properties. The multiple cyclic deformation behavior can be analytically described using the advanced Mullins damage modeling (AMDM) approach, validated through experimental data. The AMDM uses two damage functions for the increasing and decreasing stress phases of the cycle via the relaxed METM approach. The feasibility of this approach is demonstrated through three-dimensional finite element simulations, confirming the validity of AMDM under cyclic deformation. The combination of the relaxed METM and AMDM approaches provides a robust framework for predicting the cyclic deformation behavior of filled elastomers, with significant applications in engineering and material science.
- 1 January 2025
- Published by Rubber Division, ACS in Rubber Chemistry and Technology
- Vol. 98 (1) , 124-141
ADVANCED MULLINS DAMAGE MODELING AFTER MULTIPLE CYCLIC LOADING IN VULCANIZATES. PART 1: THEORY AND PARAMETER IDENTIFICATION
This study explores the deformation behavior of carbon black–filled elastomeric components under multiple cyclic loading conditions. Understanding the effects of repeated cyclic deformation is crucial for accurate finite element method simulations. We present an approach that captures both initial and subsequent cycles, converging to an equilibrium state. Experimental evidence from cyclic deformation and relaxation tests indicates that an equilibrium state is achieved within five deformation cycles. Our method analytically describes the relaxed or equilibrium state after multiple cyclic deformations by combining a relaxation model with a material model. We used a combination of a relaxation approach and the modified extended tube model (METM), allowing us to distinguish between polymer network effects and filler properties, thereby establishing a direct correlation between elastomer parameters and mechanical properties. The multiple cyclic deformation behavior can be analytically described using the advanced Mullins damage modeling (AMDM) approach, validated through experimental data. The AMDM uses two damage functions for the increasing and decreasing stress phases of the cycle via the relaxed METM approach. The feasibility of this approach is demonstrated through three-dimensional finite element simulations, confirming the validity of AMDM under cyclic deformation. The combination of the relaxed METM and AMDM approaches provides a robust framework for predicting the cyclic deformation behavior of filled elastomers, with significant applications in engineering and material science.
- Open Access
- 1 February 2022
- Published by Elsevier in Journal of Loss Prevention in the Process Industries
- Vol. 75
Analysis of pressure drop and blast pressure leakage of passive air blast safety valves: An experimental and numerical study
- 1 February 2022
- Published by Elsevier in Journal of Loss Prevention in the Process Industries
- Vol. 75
Open AccessAnalysis of pressure drop and blast pressure leakage of passive air blast safety valves: An experimental and numerical study
- Open Access
Simulation and validation of residual deformations in additive manufacturing of metal parts