Haydar Livatyali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Haydar Livatyali has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Hamza Kemal Akyildiz
Department of Mechanical Engineering, Bozok University, Yozgat, Turkey
3 shared publications Mevlüt Türköz
Dept. of Mechanical Engineering, Konya Technical University, Konya, Turkey
3 shared publicationsT Altan
Engineering Research Center for Net Shape Manufacturing, The Ohio State University, 339 Baker Systems Building, 1971 Neil Avenue, Columbus, OH 43210-1271, USA
3 shared publications- Alper Uysal
Department of Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey
2 shared publications Cüneyt Yılmaz
Dept. of Mechatronics Engineering, Yildiz Technical University, Istanbul, Turkey
2 shared publicationsEmre Gür
Dept. of Mechatronics Engineering, Yildiz Technical University, Istanbul, Turkey
2 shared publications
Latest Publications
- 17 July 2026
- Published by Springer Nature
- p. 562-570
Investigation of the Milling Performance of Different Support Structures Produced by FDM Using Hyper PLA
- 17 July 2026
- Published by Springer Nature
- p. 562-570
Investigation of the Milling Performance of Different Support Structures Produced by FDM Using Hyper PLA
- 2 December 2025
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 30 (2) , 424-448
Machining performance analysis and optimization in the milling of mold steel under MQL with nanofluid
- 2 December 2025
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 30 (2) , 424-448
Machining performance analysis and optimization in the milling of mold steel under MQL with nanofluid
- 17 November 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
- Vol. 239 (11-12) , 1133-1146
A motorcycle ambulance with detachable seat: A solution for swift emergency patient transport
This study aims to develop an effective system for transporting civilians injured in natural disasters, accidents, or terrorist attacks to hospitals quickly. The system’s design, prototyping, and performance tests focussed on ensuring that a patient could be seated in a modular chair, easily lifted and secured to the back of a motorcycle, while maintaining balance during loading, transport, and unloading. A key requirement was enabling a single operator to carry out the operation safely, with the patient seated backward. The design includes a detachable seat, which is similar to a wheelchair, connected to the motorcycle. A prototype was built and tested on a cargo scooter with a 125 -cc engine. After analysis, simulations, and successful road tests with a full-size passenger test dummy, the data showed that the system’s performance matched theoretical expectations, particularly in speed and cornering. The prototype demonstrated excellent road performance. In addition, the measured loading and unloading time of the patient seat was below 2 min, and the prototype completed the 50 m, 14% slope (Track2) without rearing or instability. Manoeuvrability results were compared against the baseline scooter (driver only), showing similar speeds and slightly lower lateral accelerations due to cautious driving.
- 17 November 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
- Vol. 239 (11-12) , 1133-1146
A motorcycle ambulance with detachable seat: A solution for swift emergency patient transport
This study aims to develop an effective system for transporting civilians injured in natural disasters, accidents, or terrorist attacks to hospitals quickly. The system’s design, prototyping, and performance tests focussed on ensuring that a patient could be seated in a modular chair, easily lifted and secured to the back of a motorcycle, while maintaining balance during loading, transport, and unloading. A key requirement was enabling a single operator to carry out the operation safely, with the patient seated backward. The design includes a detachable seat, which is similar to a wheelchair, connected to the motorcycle. A prototype was built and tested on a cargo scooter with a 125 -cc engine. After analysis, simulations, and successful road tests with a full-size passenger test dummy, the data showed that the system’s performance matched theoretical expectations, particularly in speed and cornering. The prototype demonstrated excellent road performance. In addition, the measured loading and unloading time of the patient seat was below 2 min, and the prototype completed the 50 m, 14% slope (Track2) without rearing or instability. Manoeuvrability results were compared against the baseline scooter (driver only), showing similar speeds and slightly lower lateral accelerations due to cautious driving.
- 25 February 2025
- Published by Springer Nature
- p. 149-188
Additive Friction Stir Deposition for Aluminum Alloys in Aerospace Applications
- 25 February 2025
- Published by Springer Nature
- p. 149-188
Additive Friction Stir Deposition for Aluminum Alloys in Aerospace Applications
- 24 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (1) , 415-439
Design of a motorcycle ambulance with an integrated passenger seat mechanism for emergency response
It is aimed to develop a unique method and system to effectively and immediately transport civilians injured during natural disasters, accidents, or terrorist attacks to hospitals. The development, prototyping and performance test studies of the mechanical system were performed. The system was required ensure that the patient is seated in a modular chair easily lifted and fixed to the rear of the motorcycle with a special mechanism, and that the motorcycle remains in balance during this loading, transporting, and unloading. The ability of a single operator to perform the rescue operation without assistance and the safety of the transported person while sitting backward are considered prerequisites. In the design concept subject to this article, an integrated seat is designed. This seat is connected to the motorcycle with a parallel link mechanism, which is lowered to the level where the patient can be easily seated by pulling a lever and can be fixed to the back of the motorcycle by pushing the same arm after the patient is loaded. One prototype was manufactured and integrated into a cargo scooter with an air-cooled 125 cc engine. Analysis and simulations were done, then road tests were successfully conducted using a full-size passenger mock-up, and then the collected data were analyzed. The test studies were carried out on platforms with a maximum slope of 14% and the maximum acceleration values were determined as 1.4 m/s 2 in acceleration and 2.7 m/s 2 in braking, and these values were found to be within the theoretical safe working area. Road performance tests confirmed compatibility with theoretical predictions for cornering speeds and side tilt angles, demonstrating the system’s viability for real-world applications. This design offers a cost-effective solution for emergency transport in areas inaccessible to conventional ambulances, contributing significantly to disaster response and urban emergency care.
- 24 January 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (1) , 415-439
Design of a motorcycle ambulance with an integrated passenger seat mechanism for emergency response
It is aimed to develop a unique method and system to effectively and immediately transport civilians injured during natural disasters, accidents, or terrorist attacks to hospitals. The development, prototyping and performance test studies of the mechanical system were performed. The system was required ensure that the patient is seated in a modular chair easily lifted and fixed to the rear of the motorcycle with a special mechanism, and that the motorcycle remains in balance during this loading, transporting, and unloading. The ability of a single operator to perform the rescue operation without assistance and the safety of the transported person while sitting backward are considered prerequisites. In the design concept subject to this article, an integrated seat is designed. This seat is connected to the motorcycle with a parallel link mechanism, which is lowered to the level where the patient can be easily seated by pulling a lever and can be fixed to the back of the motorcycle by pushing the same arm after the patient is loaded. One prototype was manufactured and integrated into a cargo scooter with an air-cooled 125 cc engine. Analysis and simulations were done, then road tests were successfully conducted using a full-size passenger mock-up, and then the collected data were analyzed. The test studies were carried out on platforms with a maximum slope of 14% and the maximum acceleration values were determined as 1.4 m/s 2 in acceleration and 2.7 m/s 2 in braking, and these values were found to be within the theoretical safe working area. Road performance tests confirmed compatibility with theoretical predictions for cornering speeds and side tilt angles, demonstrating the system’s viability for real-world applications. This design offers a cost-effective solution for emergency transport in areas inaccessible to conventional ambulances, contributing significantly to disaster response and urban emergency care.
- Open Access
- 27 October 2024
- Published by Holistence Publications in Journal of Life Economics
- Vol. 11 (4) , 175-184
Günlük hayatta dijitalleşme açısından Türkiye - ABD karşılaştırması - 2023
Bilgi ve iletişim teknolojileri ülkeler arasındaki tüketim alışkanlıklarının farkını ülkelerin kalkınmışlık ve toplam milli gelirlerinden kısmen de olsa bağımsızlaştırarak kişi başına milli gelir ve kişilerin bireysel gelirlerine endeksli hale getirmiştir. Türkiye’nin büyük bir ekonomik ve siyasi değişim yaşadığı 1980 ile kıyaslandığında ABD ile tüketim alışkanlıkları arasındaki fark 2023 itibariyle çok azalmıştır. Bunun en belirgin göstergelerinden biri dijital teknolojilerin günlük hayatta işleyen süreçler ve kullanılan sistemlerdeki yeridir. 2023 yılı itibarı ile her iki ülkedeki üretim ve hizmet sektörleri ele alındığında perakende ticaretten, ulaşıma; bankacılık ve finanstan restoran ve otelcilik hizmetlerine; sağlıktan saç kesimi gibi bakım hizmetlerine, pek çok alanda ve sektörde bilgisayar ve dijital iletişim teknolojilerinin at-başı gittiği söylenilebilir. Bazı alanlarda ve iletişim hızı ile bilgi güvenliğinde ABD daha ileri gibi görünürken, tele-tıp, sağlık ve bankacılık sistemlerinin entegrasyonu gibi konularda Türkiye daha gelişmiş durumdadır. Bu makalede farklı alan ve sektörlerde iki ülkede kullanılan yöntem ve sistemler kısaca karşılaştırılmıştır. Bilgi ve iletişim teknolojilerinin yaygınlaşması ve topluma penetrasyonunda en önemli faktörlerden birinin ülke ekonomilerinin hangi oranda kayıtlı/kayıt-dışı olduklarına bağlı olduğu değerlendirilmektedir. Sonuç olarak, her iki toplumda bazı kesimler kayıt dışı ekonomide kalmak isteseler de dijital dönüşüm toplum işlevlerinin giderek artan oranda kayıtlı hale gelmesini sağlamaktadır.
- 27 October 2024
- Published by Holistence Publications in Journal of Life Economics
- Vol. 11 (4) , 175-184
Open AccessGünlük hayatta dijitalleşme açısından Türkiye - ABD karşılaştırması - 2023
Bilgi ve iletişim teknolojileri ülkeler arasındaki tüketim alışkanlıklarının farkını ülkelerin kalkınmışlık ve toplam milli gelirlerinden kısmen de olsa bağımsızlaştırarak kişi başına milli gelir ve kişilerin bireysel gelirlerine endeksli hale getirmiştir. Türkiye’nin büyük bir ekonomik ve siyasi değişim yaşadığı 1980 ile kıyaslandığında ABD ile tüketim alışkanlıkları arasındaki fark 2023 itibariyle çok azalmıştır. Bunun en belirgin göstergelerinden biri dijital teknolojilerin günlük hayatta işleyen süreçler ve kullanılan sistemlerdeki yeridir. 2023 yılı itibarı ile her iki ülkedeki üretim ve hizmet sektörleri ele alındığında perakende ticaretten, ulaşıma; bankacılık ve finanstan restoran ve otelcilik hizmetlerine; sağlıktan saç kesimi gibi bakım hizmetlerine, pek çok alanda ve sektörde bilgisayar ve dijital iletişim teknolojilerinin at-başı gittiği söylenilebilir. Bazı alanlarda ve iletişim hızı ile bilgi güvenliğinde ABD daha ileri gibi görünürken, tele-tıp, sağlık ve bankacılık sistemlerinin entegrasyonu gibi konularda Türkiye daha gelişmiş durumdadır. Bu makalede farklı alan ve sektörlerde iki ülkede kullanılan yöntem ve sistemler kısaca karşılaştırılmıştır. Bilgi ve iletişim teknolojilerinin yaygınlaşması ve topluma penetrasyonunda en önemli faktörlerden birinin ülke ekonomilerinin hangi oranda kayıtlı/kayıt-dışı olduklarına bağlı olduğu değerlendirilmektedir. Sonuç olarak, her iki toplumda bazı kesimler kayıt dışı ekonomide kalmak isteseler de dijital dönüşüm toplum işlevlerinin giderek artan oranda kayıtlı hale gelmesini sağlamaktadır.
- 31 December 2023
- Published by Necmettin Erbakan University in ASREL
Solid-State VS. Fusion-Based Metal Additive Manufacturing Technologies
Metal eklemeli imalat (MEİ) süreçleri sektörde hala alışılmışın dışında görülüyor ve seri üretimden ziyade niş uygulamalar için değerlendiriliyor. Sektörde süreç seçiminde en önemli belirleyici unsurlar üretim süresi ve birim maliyettir. Döküm, metal şekillendirme ve talaşlı imalat süreçlerinin çoğu, düşük ve orta maliyetli seri üretim için olgunlaştırılmış ve optimize edilmiştir; ancak imalatın büyük bir kısmı özelleştirmeyi içermektedir ve MEİ süreçlerinin geleneksel imalata iyi bir alternatif olabileceği tek veya çok küçük adetlerde üretilen birçok ürün de mevcuttur. MEİ'in güçlü ve zayıf yönlerini anlamak, teknik ve ekonomik açıdan en uygun seçeneğin seçilmesinde kritik öneme sahiptir. MEİ işlemlerini füzyon tabanlı ve katı hal olarak sınıflandırmak, her kategorinin sağladığı malzeme özelliklerinde ve geometrik hassasiyette önemli farklılıklar olması açısından anlamlıdır. Genel olarak füzyon tabanlı teknolojiler, döküme yakın malzeme özelliklerine sahip net şekilli parçalar üretir. Öte yandan, katı hal süreçleri "net şekle yakın" geometriler üretir; ancak malzeme özellikleri daha üstün olabilir. Bununla birlikte, neredeyse her durumda, ikincil veya tamamlayıcı yüzey işlemleri de gereklidir.
- 31 December 2023
- Published by Necmettin Erbakan University in ASREL
Solid-State VS. Fusion-Based Metal Additive Manufacturing Technologies
Metal eklemeli imalat (MEİ) süreçleri sektörde hala alışılmışın dışında görülüyor ve seri üretimden ziyade niş uygulamalar için değerlendiriliyor. Sektörde süreç seçiminde en önemli belirleyici unsurlar üretim süresi ve birim maliyettir. Döküm, metal şekillendirme ve talaşlı imalat süreçlerinin çoğu, düşük ve orta maliyetli seri üretim için olgunlaştırılmış ve optimize edilmiştir; ancak imalatın büyük bir kısmı özelleştirmeyi içermektedir ve MEİ süreçlerinin geleneksel imalata iyi bir alternatif olabileceği tek veya çok küçük adetlerde üretilen birçok ürün de mevcuttur. MEİ'in güçlü ve zayıf yönlerini anlamak, teknik ve ekonomik açıdan en uygun seçeneğin seçilmesinde kritik öneme sahiptir. MEİ işlemlerini füzyon tabanlı ve katı hal olarak sınıflandırmak, her kategorinin sağladığı malzeme özelliklerinde ve geometrik hassasiyette önemli farklılıklar olması açısından anlamlıdır. Genel olarak füzyon tabanlı teknolojiler, döküme yakın malzeme özelliklerine sahip net şekilli parçalar üretir. Öte yandan, katı hal süreçleri "net şekle yakın" geometriler üretir; ancak malzeme özellikleri daha üstün olabilir. Bununla birlikte, neredeyse her durumda, ikincil veya tamamlayıcı yüzey işlemleri de gereklidir.
- 15 October 2022
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 29 (5) , 1491-1498
Artificial Intelligence in Foreign Object Classification in Fenceless Robotic Work Cells Using 2-D Safety Cameras
Production systems using robotic manipulators have become common in the last few decades, and the trend is towards fenceless cells that save from space. Thus, the safety and flexibility of these systems have become more critical. The safety systems a...
- 15 October 2022
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 29 (5) , 1491-1498
Artificial Intelligence in Foreign Object Classification in Fenceless Robotic Work Cells Using 2-D Safety Cameras
Production systems using robotic manipulators have become common in the last few decades, and the trend is towards fenceless cells that save from space. Thus, the safety and flexibility of these systems have become more critical. The safety systems a...
- 15 March 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 120 (7-8) , 4373-4386
Experimental comparison of straight flanging and rotary die bending based on springback
- 15 March 2022
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 120 (7-8) , 4373-4386
Experimental comparison of straight flanging and rotary die bending based on springback