JKJames D. Kiser

James D. Kiser

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


James D. Kiser has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Comprehensive Analysis of Thermal Heat Dissipation for Lithium-Ion Battery Packs

    by Xuguang Zhang, Hexiang Zhang, Amjad Almansour, Mrityunjay Singh, James D. Kiser, Hengling Zhu, Michael C. Halbig, Yi Zheng

    Effective thermal management is essential for the safe and efficient operation of lithium-ion battery packs, particularly in compact, airflow-sensitive applications such as drones. This study presents a comprehensive thermal analysis of a 16-cell lithium-ion battery pack by exploring seven geometric configurations under airflow speeds ranging from 0 to 15 m/s and integrating nano-carbon-based phase change materials (PCMs) to enhance heat dissipation. A Computational Fluid Dynamics (CFD) approach was employed using Ansys Discovery and Workbench 2024 R1 to simulate airflow and heat transfer processes with high spatial resolution. Using high-fidelity 3D simulations, we found that the trapezoidal wide-base configuration, combined with a 5-inlet and 1-outlet airflow design, achieved the most balanced cooling performance across all speed regimes. This configuration maintained battery temperatures within the optimal operating range (∼45 °C) in both low- and high-speed airflow conditions, with a maximum temperature reduction of up to 8.3 °C compared to the standard square configuration. Additionally, PCM integration extended the thermal regulation duration to approximately 12.5 min, effectively buffering thermal spikes during peak loads. These findings underscore the critical role of CFD-driven geometric optimization and advanced material integration in designing high-efficiency, compact cooling systems for energy-dense battery applications in drones and portable electronics.


  • Acoustic Emission in Ceramic Matrix Composites

    by Nikhil Tulshibagwale, Neal Brodnik, Caelin Muir, Ashley Hilmas, James D. Kiser, Craig E. Smith, Amjad S. Almansour, Michael J. Presby, Samantha H. Daly

    The integration of ceramic matrix composites (CMCs) into safety-critical applications, such as turbine engines and aerospace structures, necessitates a sound understanding of their expected damage evolution under in-service conditions and real-time health-monitoring methods to assess their damage state. The measurement of acoustic emissions (AEs), the transient elastic waves emitted during damage formation, offers an enhanced capability for evaluating damage evolution and structural health in CMCs due to its high sensitivity, accurate temporal resolution, and relative ease of use compared to other nondestructive evaluation (NDE) techniques. Recent advances in numerical simulation methods and data-driven model development, in combination with improved multimodal experimental characterization methods and sensor hardware, are rapidly advancing AE to a mature technique for damage quantification. This review discusses the fundamental principles of acoustic emissions, provides practical guidelines on their experimental characterization and analysis, and offers perspectives on the current state-of-the-art.


  • Open Access

    Manufacturing Process Development and Rig Validation of Slurry Environmental Barrier Coatings for SiC Ceramic and SiC Composite Sub-Components

    by Kang N. Lee, Bryan J. Harder, Bernadette J. Puleo, Amjad S. Almansour, James D. Kiser, John A. Setlock, Dennis S. Fox, Michael D. Cuy, Sreeramesh Kalluri, Ramakrishna T. Bhatt

    The process scale-up of fully oxide-based environmental barrier coatings (EBCs) on sintered SiC and chemical vapor infiltration (CVI) SiC/SiC ceramic matrix composite (CMC) sub-components was investigated using various slurry manufacturing processes (dip, spray, spin–dip). The performance of EBC-coated sub-components (SiC heating element, SiC/SiC ceramic matrix mini-composite, SiC airfoil, SiC/SiC CMC airfoil) was evaluated in steam oxidation and combustion rigs. Steam oxidation was conducted at 1427 °C in 90 vol.% H2O (g) + 10 vol.% O2 (g) with a 1 h hold at 1427 °C per cycle (1 h hot and 20 min cooling). For high-pressure combustion rig testing, the EBC surface temperature ranged between 1354 °C and 1538 °C with the temperature gradient through CMC + EBC ranging between 100 °C and 150 °C. Dip and spin–dip are non-line-of-sight processes, whereas spray is a line-of-sight process. The three processes, collectively, demonstrated the capability to manufacture slurry EBCs on sub-components with various shapes and sizes. There was no discernable disparity in the EBC steam oxidation performance between the coupons and sub-components in this study and coupons in a previous study. The dependence of steam oxidation rates on the substrate chemistry reported previously was confirmed. The steam oxidation rate of EBC-coated sintered SiC, compared with EBC-coated CVI CMC, was ~2 times and ~1.5 times higher after 100 h and 500 h, respectively, due to the boron sintering aid in sintered SiC. An EBC-coated CMC airfoil after 150 15-h-long cycles in a high-pressure combustion rig test showed only limited EBC spallation along the leading edge and more substantial spallation along the trailing edge, demonstrating the feasibility of an oxide-based bond coat to meet the extreme temperature requirements of next-generation EBCs.