Carlos Chiquete
Research Subjects
Research Interests
Carlos Chiquete has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Mark Short
Los Alamos National Laboratory
10 shared publications - Eric Karl Anderson
Los Alamos National Laboratory 1 , Los Alamos, New Mexico 87545
7 shared publications - Scott I. Jackson
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
6 shared publications - Stephen Joseph Voelkel
University of Texas, Austin
5 shared publications James J. Quirk
3 shared publications- Malcolm John Burns
Los Alamos National Laboratory , P.O. Box 1663, Los Alamos, New Mexico 87545, USA
2 shared publications
Latest Publications
- Open Access
- 10 October 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
The role of an inert layer in gas detonations within circular arc geometries
- 10 October 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessThe role of an inert layer in gas detonations within circular arc geometries
- Open Access
- 17 September 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
The influence of high-sound-speed confinement on detonation propagation in high explosives
- 17 September 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessThe influence of high-sound-speed confinement on detonation propagation in high explosives
- Open Access
- 13 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
The effect of aging and charge variability on the detonation performance of a conventional plastic-bonded high explosive
Plastic-bonded explosives (PBXs) are pressed composites of energetic crystals (>90 wt. %), polymeric binder, and an internal porosity structure (1–2 vol. %). The binder ensures material stability, while porosity promotes more reliable reaction initiation. These microstructural features critically influence the bulk mechanical and detonation performance properties of the high explosive (HE), yet the connection between microstructure and bulk behavior remains incompletely understood, complicating both manufacture and characterization. Aging of HE constituents under varying environmental conditions introduces additional uncertainty. For PBXs composed of cyclotetramethylene–tetranitramine (HMX), it is commonly assumed that detonation performance, specifically detonation velocity and energy release, are insensitive to microstructural details and do not vary significantly over time. This assumption simplifies constitutive modeling choices at the engineering scale. Here, we analyze four high-precision cylinder expansion tests of an HMX-based PBX varying in molding powder lot, pressing method, final pressed density, and pressing age. These data support hydrocode-based model calibrations of the explosive product equation of state, and these are used to quantify the effect of the described material variability on energy release characteristics. The results indicate that the detonation velocity increases with density and may also increase with age, though further experiments would be required for confirmation. No significant variation in energy delivery was observed across the tests.
- 13 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (6)
Open AccessThe effect of aging and charge variability on the detonation performance of a conventional plastic-bonded high explosive
Plastic-bonded explosives (PBXs) are pressed composites of energetic crystals (>90 wt. %), polymeric binder, and an internal porosity structure (1–2 vol. %). The binder ensures material stability, while porosity promotes more reliable reaction initiation. These microstructural features critically influence the bulk mechanical and detonation performance properties of the high explosive (HE), yet the connection between microstructure and bulk behavior remains incompletely understood, complicating both manufacture and characterization. Aging of HE constituents under varying environmental conditions introduces additional uncertainty. For PBXs composed of cyclotetramethylene–tetranitramine (HMX), it is commonly assumed that detonation performance, specifically detonation velocity and energy release, are insensitive to microstructural details and do not vary significantly over time. This assumption simplifies constitutive modeling choices at the engineering scale. Here, we analyze four high-precision cylinder expansion tests of an HMX-based PBX varying in molding powder lot, pressing method, final pressed density, and pressing age. These data support hydrocode-based model calibrations of the explosive product equation of state, and these are used to quantify the effect of the described material variability on energy release characteristics. The results indicate that the detonation velocity increases with density and may also increase with age, though further experiments would be required for confirmation. No significant variation in energy delivery was observed across the tests.
- Open Access
- 19 May 2025
- Published by Elsevier in Combustion and Flame
- Vol. 277
A density- and composition-aware model for detonation propagation in the TATB-based explosive PBX 9502
- 19 May 2025
- Published by Elsevier in Combustion and Flame
- Vol. 277
Open AccessA density- and composition-aware model for detonation propagation in the TATB-based explosive PBX 9502
- Open Access
- 28 December 2024
- Published by Elsevier in Combustion and Flame
- Vol. 273
Influence of initial density on detonation propagation in a TATB-based high explosive
- 28 December 2024
- Published by Elsevier in Combustion and Flame
- Vol. 273
Open AccessInfluence of initial density on detonation propagation in a TATB-based high explosive
- 29 August 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Curvature effect on stabilization of cellular detonations in channel, circular arc and spherical shell geometries
- 29 August 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Curvature effect on stabilization of cellular detonations in channel, circular arc and spherical shell geometries
- Open Access
- 10 July 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Experimental investigation of high explosive detonation structure and dynamics near the failure diameter
- 10 July 2024
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 40 (1-4)
Open AccessExperimental investigation of high explosive detonation structure and dynamics near the failure diameter
- Open Access
- 20 September 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (11)
The reactive flow evolution of the polymer-bonded explosive PBX 9502: Experiments and model validation in extreme pressure regimes
The shock-to-detonation transition properties of the triaminotrinitrobenzene based PBX 9502 high explosive (HE) are experimentally and computationally explored in extremely high input pressure conditions. These include both slightly sub-Chapman–Jouguet and overdriven input pressure conditions, namely, ∼25 and ∼31 GPa, respectively. Our experiments capture the transient buildup of a shock-induced reaction via measurement of HE and polymethyl methacrylate window interface particle velocity profiles for a variety of sample thicknesses for this insensitive HE. These observations necessitate extremely thin explosive samples, and the high rates of reaction provide a considerable challenge to optical diagnostics. Samples at these thicknesses also provide an opportunity for evaluation of potential micro-structure effects on the resulting shock-to-detonation-transition measurements. To address this, the thin samples are also characterized via x-ray micro-computed tomography. Finally, a pair of previously established continuum-level detonation performance modeling approaches for PBX 9502 were used to analyze the experiments. The employed model variants crucially differ in their definition of each model’s empirical reaction rate functional form, utilization of shock state quantities, and local flow variable dependencies. As a result, the present experiments provide a novel platform to evaluate the quantitative and qualitative consequences stemming from these modeling choices in a challenging initiation scenario, largely beyond the chosen calibration range of either model. This new experimental information will provide a platform for both improved physics and model parameterizations for this well-studied explosive.
- 20 September 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 134 (11)
Open AccessThe reactive flow evolution of the polymer-bonded explosive PBX 9502: Experiments and model validation in extreme pressure regimes
The shock-to-detonation transition properties of the triaminotrinitrobenzene based PBX 9502 high explosive (HE) are experimentally and computationally explored in extremely high input pressure conditions. These include both slightly sub-Chapman–Jouguet and overdriven input pressure conditions, namely, ∼25 and ∼31 GPa, respectively. Our experiments capture the transient buildup of a shock-induced reaction via measurement of HE and polymethyl methacrylate window interface particle velocity profiles for a variety of sample thicknesses for this insensitive HE. These observations necessitate extremely thin explosive samples, and the high rates of reaction provide a considerable challenge to optical diagnostics. Samples at these thicknesses also provide an opportunity for evaluation of potential micro-structure effects on the resulting shock-to-detonation-transition measurements. To address this, the thin samples are also characterized via x-ray micro-computed tomography. Finally, a pair of previously established continuum-level detonation performance modeling approaches for PBX 9502 were used to analyze the experiments. The employed model variants crucially differ in their definition of each model’s empirical reaction rate functional form, utilization of shock state quantities, and local flow variable dependencies. As a result, the present experiments provide a novel platform to evaluate the quantitative and qualitative consequences stemming from these modeling choices in a challenging initiation scenario, largely beyond the chosen calibration range of either model. This new experimental information will provide a platform for both improved physics and model parameterizations for this well-studied explosive.
- Open Access
- 22 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
Validation of a detonation product equation of state for an insensitive high explosive via slab geometry expansion tests
Slab expansion (SLABEX) tests are conducted to validate a process for calibrating the detonation products equation of state (EOS) of a high explosive (HE). The SLABEX tests use rectangular slabs of PBX 9502, a polymer-bonded HE formulation consisting of 95 wt.% 1,3,5-triamino-2,4,6-trinitrobenzene bound with Kel F-800, a co-polymer of chlorotrifluoroethylene and vinylidene-fluoride. Three PBX 9502 slab thicknesses are examined, each confined symmetrically by two rectangular copper (Cu) plates approximately one-tenth the thickness of the HE slab. For the duration of each experiment, the detonation flow along the central axis of the PBX 9502 slab remains two-dimensional. The lateral flow velocity component of the outer surfaces of the expanding Cu plates is measured, along with the steady axial detonation speed along the central axis of the SLABEX. Hydrodynamic simulations of the Cu plate expansion in the SLABEX geometry, driven by the energy stored in the detonation products by the detonation combustion event, are conducted using a Jones–Wilkins–Lee EOS for the detonation products. This EOS form was recently parameterized for PBX 9502 in the cylinder expansion test geometry using a newly developed calibration technique [Voelkel et al., Combust. Flame 246, 112373 (2022)]. Good agreement between the experiment and prediction is found in each SLABEX test, demonstrating that the detonation product EOS calibration technique produces EOSs that are predictive when applied to other geometries.
- 22 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (24)
Open AccessValidation of a detonation product equation of state for an insensitive high explosive via slab geometry expansion tests
Slab expansion (SLABEX) tests are conducted to validate a process for calibrating the detonation products equation of state (EOS) of a high explosive (HE). The SLABEX tests use rectangular slabs of PBX 9502, a polymer-bonded HE formulation consisting of 95 wt.% 1,3,5-triamino-2,4,6-trinitrobenzene bound with Kel F-800, a co-polymer of chlorotrifluoroethylene and vinylidene-fluoride. Three PBX 9502 slab thicknesses are examined, each confined symmetrically by two rectangular copper (Cu) plates approximately one-tenth the thickness of the HE slab. For the duration of each experiment, the detonation flow along the central axis of the PBX 9502 slab remains two-dimensional. The lateral flow velocity component of the outer surfaces of the expanding Cu plates is measured, along with the steady axial detonation speed along the central axis of the SLABEX. Hydrodynamic simulations of the Cu plate expansion in the SLABEX geometry, driven by the energy stored in the detonation products by the detonation combustion event, are conducted using a Jones–Wilkins–Lee EOS for the detonation products. This EOS form was recently parameterized for PBX 9502 in the cylinder expansion test geometry using a newly developed calibration technique [Voelkel et al., Combust. Flame 246, 112373 (2022)]. Good agreement between the experiment and prediction is found in each SLABEX test, demonstrating that the detonation product EOS calibration technique produces EOSs that are predictive when applied to other geometries.
- 1 January 2021
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 38 (3) , 3683-3690
Experimental and modeling analysis of detonation in circular arcs of the conventional high explosive PBX 9501
- 1 January 2021
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 38 (3) , 3683-3690
Experimental and modeling analysis of detonation in circular arcs of the conventional high explosive PBX 9501