ODOlena Dromenko

Olena Dromenko

*This is an algorithmically generated author record based on publicly available information.

Olena Dromenko has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Devising a technique and designing an apparatus for obtaining a multifunctional purpose film from intestinal raw materials

    by Andrey Pak, Vyacheslav Оnishchenko, Maryna Yancheva, Nataliya Grynchenko, Olena Dromenko, Alina Pak, Samvel Inzhyyants, Аrtem Оnyshchenko

    The object of research is a technique for making glued intestinal films for multifunctional purposes, which are further strengthened by a stitching apparatus using thermal coagulation. This paper substantiates the technical and technological solutions for obtaining glued intestinal films that can be used for the manufacture of sausage casings and as a multifunctional material in the food industry. The technique and apparatus for stitching intestinal raw materials were developed; the structural features of the apparatus and its rational operation modes were determined. The proposed technique involves stitching by thermal coagulation of intestinal films from beef belly, which belong to intestinal and sausage waste. The possibility of stitching intestinal raw materials, different in size, thickness, and species, is achieved, which allows preserving a valuable animal resource and increasing the efficiency of glued intestinal films technology. The breaking load of the seam obtained by thermal coagulation was investigated and the rational ranges of stitching duration were determined. The breaking load of the seam was defined, which is a series of points that were subjected to thermal coagulation; its nonlinear change with a change in the distance between points was established. It was found that the values of the breaking load of the seam for the range of distance between the points that create it, from 5 to 20 mm, respectively, lie in the range from 17.5 to 15.0 N/m. This satisfies the technological requirements for the strength of the seam of glued intestinal sausage casings. The influence of the distance between the points that create a seam between the layers of intestinal raw materials on the outflow of the liquid filling fraction for sausages from the sausage casing was established; the height of the liquid fraction, at which the outflow was considered significant, was determined


  • Open Access

    Determination of the heat transfer coefficient of a rotary film evaporator with a heating film-forming element

    by Andrii Zahorulko, Aleksey Zagorulko, Oleksander Cherevko, Olena Dromenko, Alla Solomon, Roman Yakobchuk, Oksana Bondarenko, Nataliia Nozdrina

    A model of a rotary film evaporator with a film-forming element with a reflective heated surface has been developed. This will allow stabilizing the hydraulic movement of the cut wave flow due to the reflective surface of the geometric shape for the forced direction of the cut raw material to the heating surface. Autonomous heating of the reflective surface additionally provides a temperature effect in the conditions of movement of particles of raw materials after cutting. The analysis of the experimental and theoretical parameters of heat transfer made it possible to substantiate the criterion equation for determining the heat transfer coefficient of an evaporator with the proposed film-forming element and a reflective heated surface for calculating the coefficient from the working surface to the raw material. The resulting equation takes into account the influence of the vertical component of the motion of the raw material film, centrifugal movement during the rotation of the film-forming element, mixing of the boiling film of the raw material with steam bubbles, and the geometric characteristics of the film-forming blade on the hydrodynamic flow of the raw material. The calculation of the rotary-film evaporator was carried out using the criterion equation and the obtained useful heat exchange surface – 0.75 m2. The specific metal consumption in a rotary film evaporator with a film-forming element having a reflective surface is 57 kg/m2, compared to the vacuum evaporator traditionally used in canning industries (410 kg/m2), which is 7.1 times less. The duration of the temperature effect on the raw material is also reduced: a rotary film evaporator – 200 s and 3600 s in a traditional apparatus. The data obtained will be useful for the design of rotary-film devices of different geometric parameters using articulated blades with a reflective plate.


  • RESEARCH INTO THE THERMOPHYSICAL CHARACTERISTICS OF MUSCLE AND ADIPOSE TISSUES IN THE FREEZING–THAWING PROCESS

    by O. Dromenko, V. Potapov, M. Yancheva, V. Оnishchenko, V. Bolshakova, A. Inzhyyants

    The paper presents a study of the thermophysical characteristics of meat systems based on minced beef and pork with different morphological composition in the freezing–thawing process, and those of model systems based on minced beef with addition of adipose tissue (raw fat). The method used to detect and compare the thermodynamic changes consisted in determining the effective specific heat capacity by freeze-thaw thermograms and was based on a set of informational parameters related to it (cryoscopic temperature, cryoscopic interval of temperatures, specific heat of phase transition in the cryoscopic temperature interval, change of enthalpy in the interval of temperatures of the sample tested, proportion of moisture that changes its physical state in the cryoscopic temperature interval). It has been shown that the morphological structure of meat (the ratio of muscle, connective, and adipose tissues) significantly affects the thermophysical parameters of meat systems during freezing and defrosting. It has been found that under the conditions of a freeze–thaw cycle, an increase in the content of connective tissue leads to a higher proportion of moisture that changes its physical state in the cryoscopic temperature interval, while an increase in the adipose tissue content in a meat system reduces the moisture that changes its physical state in the cryoscopic temperature interval. When adipose tissue was introduced into meat systems, the freezing process resulted in a higher rate of formation of ice crystals and a lower rate of moisture migration from cells to the intercellular space, and crystal formation became a controlled process. When manufacturing semi-finished frozen meat products, regulating the ratio of muscle and adipose tissues makes it possible to influence the stability of the properties of meat systems in the technological cycle “freezing – storage – thawing” and to create products with the required functional, technological, and thermophysical parameters. This research can be a basis for developing the recipe compositions and technological parameters of manufacturing semi-finished frozen meat products and finished products based on them


  • Open Access

    PROBATION OF THE IMPROVED UNINTERRUPTED PASTEURIZATION SET “TUBE IN TUBE”

    by Andrii Zahorulko, Aleksey Zagorulko, Maryna Yancheva, Olena Dromenko, Mariana Sashnova

    There have been conducted probation studies of an improved uninterrupted pasteurization set “tube in tube” that allowed to provide modern market needs of consumers in getting high-quality food products that must undergo pasteurization stages at technological production. Heat delivery by FFREHRT is used in the set for providing heat flow distribution evenness. There has been established the optimal working space of processed raw materials by studying a temperature drop in the middle of the raw material flow and at the apparatus surface. At the width of the linear ring size of the working environment as 9.5 mm and the flow speed as 0.4 m/s there is provided the least temperature drop value as 0.7 °С. At decreasing the air gap width, the temperature drop value increases and at 5.5 mm is equal to 2 °С that favors the effectiveness decrease of the pasteurization process. According to results of comparative indices of the main composition and obtained quality of pasteurized cow milk, just the experimental sample, obtained at the probation of the offered apparatus is advantageous, comparing with a traditional. It is explained by the decrease of milk temperature processing at the expanse of double pasteurization by FFREHRT, comparing with the traditional pasteurization method. The conducted studies prove the effectiveness of constructive-technological solutions for realization of pasteurization in the set “tube in tube”: the use of two-side heating by FFREHRT that due to its technical parameters is able to take any geometric form of the working chamber and at that provides the necessary evenness of heat flow distribution. We must also note the improvement of exploitation parameters of the offered set, namely facilitation of the automatic control of temperature regulation and the absence of the steam coat and correspondent armature as in the traditional apparatus that decreases metal consumption essentially. The obtained results are urgent for using the presented invention for pasteurization of different food raw materials (milk, juice, low-alcohol beverages and so on). The use of the improved pasteurizer allows to decrease resource consumption and to improve the quality of obtained products

  • QUALITATIVE AND QUANTITATIVE CHARACTERISTICS OF FRIED SAUSAGES IN LUED INTESTINAL CASINGS

    by В.м. Онищенко, Харківський Державний Університет Харчування Та Торгівлі, В.а. Большакова, О.б. Дроменко, С.т. Інжиянц, Л.ю. Шубіна, Харківський Торговельно-Економічний Інститут Київського Національного Торговельно-Економічного Університету

  • Open Access

    Research of the complex of functional and technological properties of animal protein

    by Олена Борисівна Дроменко, Марина Олександрівна Янчева

    Представлено аналіз результатів аналітичних та практичних досліджень комплексу функціонально-технологічних властивостей білка тваринного марки Gelexcel А-95 як основи для створення функціональних комплексних добавок. Встановлено закономірності їх змін залежно від технологічних чинників, визначено раціональні параметри регідратації білка тваринного, умови гелеутворення, емульгування для подальшого застосування в технологічному процесі виробництва м’ясопродуктів