ARAntonio J. Riquelme

Antonio J. Riquelme

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Antonio J. Riquelme has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and characterization of NFA-based polymers for solar cells with improved thermal stability

    by Lucie Rivet, Antoine Curé, Camille Jutard, Samuel Fauvel, Renaud Demadrille, Antonio J Riquelme, Cyril Aumaître

    Design of polymers via Stille polymerization enables high-performance organic solar cells with improved stability, processability, and compatibility with non-halogenated solvents.


  • Open Access

    Panchromatic photochromic push–pull dyes featuring a ferrocene donor group

    by Diego Mirani, Antonio J. Riquelme, Samuel Fauvel, Cyril Aumaître, Pascale Maldivi, Jacques Pécaut, Renaud Demadrille

    Incorporating a ferrocene unit into push–pull photochromic dyes is an effective strategy for achieving panchromatic absorption in their activated state.


  • Competition between Transport and Recombination in Dye Solar Cells at Low Light Intensity

    by Patricia Sánchez‐Fernández, Clara A. Aranda, Renán Escalante, Antonio J. Riquelme, Renaud Demadrille, Paul Pistor, Gerko Oskam, Juan A. Anta

    The efficiency of electron collection in a dye‐sensitized solar cell (DSC) is determined by a delicate balance between electronic transport and recombination losses caused by electron transfer to dye cations and electron acceptors. While state‐of‐the‐art DSCs have demonstrated quantitative electron collection under standard 1 sun conditions, the nonlinear nature of the trapping/detrapping dynamics in the photoanode with respect to the stored electronic charge can result in suboptimal performance under the low illumination intensity conditions commonly found indoors. Herein, the key factors influencing electron collection in relation to light intensity using impedance spectroscopy and numerical analysis are thoroughly examined. Impedance analysis reveals that the electron diffusion length tends to decrease as the quasi‐Fermi level is lowered, approaching the critical limit ( L n /d ≈ 1) at intensities characteristic of indoor illumination. A range of tert‐butyl pyridine concentrations and different thermal and chemical treatments of the TiO 2 are tested, showing that this low intensity limitation is inherent to the multiple‐trapping mechanism that governs the functioning of a DSC. It is concluded that relatively high ideality factors, nonoptimal electrolyte compositions, or small variations in the quality of the TiO 2 layer can result in electron collection limitations that are not apparent under 1 sun but become noticeable at low light intensities.


  • Triisopropylsilylethynyl-Functionalized Anthracene-Based Hole Transport Materials for Efficient Hybrid Lead Halide Perovskite Solar Cells

    by Ece Aktas, Thi Huong Le, Michel Frigoli, Guixiang Li, Hans Köbler, Johan Liotier, Antonio J. Riquelme, Antonio Abate, Renaud Demadrille, Emilio Palomares


  • Correcting unintended changes in electroluminescence perturbation for reliable light intensity modulated spectroscopies

    by Agustin O Alvarez, Antonio J Riquelme, Rosinda Fuentes-Pineda, Elena Mas-Marzá, Lluis F Marsal, Osbel Almora, Juan A Anta, Francisco Fabregat-Santiago

    Light intensity modulated photocurrent and photovoltage spectroscopies, IMPS and IMVS respectively, are characterization techniques for studying charge carrier transport and recombination properties of photosensitive samples such as photovoltaic solar cells. In these techniques controlling the modulated light flux is key to obtaining accurate results. Typically, the electroluminescence of the light source is considered frequency-independent and therefore, it may be estimated from the modulated current delivered by the power source. However, some anomalies may appear when the experimental requirements demand large variations in the measurement conditions. Herein, an analysis is presented on the unusual low-frequency response of IMPS and IMVS which appears for some light sources at high illumination intensities. We found that a frequency-dependent modulation of the light source electroluminescence should be accounted for, rather than the traditional steady-state calibration of the setup, as it may affect the accuracy and even produce undesired artifacts during the measurements. A protocol for detecting the modulation of the electroluminescence is proposed, combining the simultaneous use of the IMPS of a reference photodiode and the impedance spectroscopy of the light source. Discerning whether these low-frequency signal ‘tails’ are due to the measurement setup or the sample is of major importance to avoid misinterpretations in any study. This is particularly important for preventing misinterpretations in studies on perovskite solar cells whose instability and ion-conductivity phenomena relate to the low-frequency region of the spectra.


  • Open Access

    Star-shape non-fullerene acceptor featuring an aza-triangulene core for organic solar cells

    by Yann Kervella, José Maria Andrés Castán, Yatzil Alejandra Avalos-Quiroz, Anass Khodr, Quentin Eynaud, Tomoyuki Koganezawa, Noriyuki Yoshimoto, Olivier Margeat, Agnès Rivaton, Antonio J. Riquelme, et al.

    We present the simple synthesis of a star-shape non-fullerene acceptor (NFA) for application in organic solar cells. This NFA possesses a D(A)3 structure in which the electron-donating core is an aza-triangulene unit and we report the first crystal structure for a star shape NFA based on this motive. We fully characterized this molecule's optoelectronic properties in solution and thin films, investigating its photovoltaic properties when blended with PTB7-Th as the electron donor component. We demonstrate that the aza-triangulene core leads to a strong absorption in the visible range with an absorption edge going from 700 nm in solution to above 850 nm in the solid state. The transport properties of the pristine molecule were investigated in field effect transistors (OFETs) and in blends with PTB7-Th following a Space-Charge-Limited Current (SCLC) protocol. We found that the mobility of electrons measured in films deposited from o-xylene and chlorobenzene are quite similar (up to 2.70 × 10−4 cm2 V−1 s−1) and that the values are not significantly modified by thermal annealing. The new NFA combined with PTB7-Th in the active layer of inverted solar cells leads to a power conversion efficiency of around 6.3% (active area 0.16 cm2) when processed from non-chlorinated solvents without thermal annealing. Thanks to impedance spectroscopy measurements performed on the solar cells, we show that the charge collection efficiency of the devices is limited by the transport properties rather than by recombination kinetics. Finally, we investigated the stability of this new NFA in various conditions and show that the star-shape molecule is more resistant against photolysis in the presence and absence of oxygen than ITIC.


  • Open Access

    Strategies to Improve the Photochromic Properties and Photovoltaic Performances of Naphthopyran Dyes in Dye‐Sensitized Solar Cells

    by Valid M. Mwalukuku, Johan Liotier, Antonio J. Riquelme, Yann Kervella, Quentin Huaulmé, Alix Haurez, Stéphanie Narbey, Juan Antonio Anta, Renaud Demadrille

    Semi‐transparent solar cells are emerging as promising devices for building integrated photovoltaics. However, regardless of the technology considered, the optical transmission of semi‐transparent solar cells is fixed during the fabrication process, and hence, cannot adjust to variations in daylight or weather conditions. This becomes an issue when applications such as photovoltaic windows are envisioned. Previously, it has been reported that the use of photochromic naphthopyran dyes in dye‐sensitized solar cells (DSSC) allows for the fabrication of semi‐transparent devices capable of modulating their light transmission and energy production depending on light intensity. Herein, a series of naphthopyran dyes with an identical pi‐conjugated backbone and varying alkyl substituents is reported. Using this molecular engineering strategy, the control of the discoloration kinetics of the photochromic dyes and the reduction of undesirable recombination processes when utilised in solar cells is demonstrated. The clear photochromic‐photovoltaic structure‐property relationships for these new photosensitizers is established and they are shown to demonstrate improved photovoltaic performances and photochromic responses in DSSC with notably faster discoloration than previously reported. For the first time with photochromic molecules, the co‐sensitization of the electrodes is explored and the highest power conversion efficiency for a photochromic DSSC is reported, reaching up to 4.34% under standard conditions.


  • Open Access

    Influence of Redox Couple on the Performance of ZnO Dye Solar Cells and Minimodules with Benzothiadiazole-Based Photosensitizers

    by Carlos A. Gonzalez-Flores, Dena Pourjafari, Renan Escalante, Esdras J. Canto-Aguilar, Alberto Vega Poot, José Maria Andres Castán, Yann Kervella, Renaud Demadrille, Antonio J. Riquelme, Juan A. Anta, et al.

    ZnO-based dye-sensitized solar cells exhibit lower efficiencies than TiO2-based systems despite advantageous charge transport dynamics and versatility in terms of synthesis methods, which can be primarily ascribed to compatibility issues of ZnO with the dyes and the redox couples originally optimized for TiO2. We evaluate the performance of solar cells based on ZnO nanomaterial prepared by microwave-assisted solvothermal synthesis, using three fully organic benzothiadiazole-based dyes YKP88, YKP-137, and MG-207, and alternative electrolyte solutions with the I-/I3-, Co(bpy)32+/3+, and Cu(dmp)21+/2+ redox couples. The best cell performance is achieved for the dye-redox couple combination YKP-88 and Co(bpy)32+/3+, reaching an average efficiency of 4.7% and 5.0% for the best cell, compared to 3.7% and 3.9% for the I-/I3- couple with the same dye. Electrical impedance spectroscopy highlights the influence of dye and redox couple chemistry on the balance of recombination and regeneration kinetics. Combined with the effects of the interaction of the redox couple with the ZnO surface, these aspects are shown to determine the solar cell performance. Minimodules based on the best systems in both parallel and series configurations reach 1.5% efficiency for an area of 23.8 cm2.


  • Impact of non-stoichiometry on ion migration and photovoltaic performance of formamidinium-based perovskite solar cells

    by Stijn Lammar, Renán Escalante, Antonio J. Riquelme, Sandra Jenatsch, Beat Ruhstaller, Gerko Oskam, Tom Aernouts, Juan A. Anta

    Ion migration mechanisms are often behind degradation pathways in perovskite solar cells under operating conditions.


  • Photochromic Naphthopyran Dyes Incorporating a Benzene, Thiophene, or Furan Spacer: Effect on Photochromic, Optoelectronic, and Photovoltaic Properties in Dye‐Sensitized Solar Cells

    by Johan Liotier, Valid Mwatati Mwalukuku, Samuel Fauvel, Antonio J. Riquelme, Juan A. Anta, Pascale Maldivi, Renaud Demadrille

    It is recently demonstrated that diaryl‐naphthopyran photochromic dyes are efficient for sensitization of TiO2 mesoporous electrodes, thus allowing the fabrication of photochromo‐voltaic cells that can self‐adapt their absorption of light and their generation of electricity with the light intensity. Herein, the synthesis and characterization of two photochromic dyes based on a diaryl‐naphthopyran core, NPI‐ThPh and NPIFuPh, for use in dye sensitized solar cells is reported. Compared to the reference dye NPI, the molecules vary by the nature of the spacer, a thiophene or a furan, connecting the photochromic unit and the anchoring function. It was found that swapping a phenyl for a thiophene or a furan leads to an improvement of the absorption properties of the molecules, both in solution and after grafting on TiO2 electrodes, however their photochromic process becomes not fully reversible. Despite better absorption in the visible range, the new dyes show poorer photochromic and photovoltaic properties in devices compared to NPI. Thanks to UV–Vis spectroscopy, theoretical modelling, electrical characterization of the cells, and impedance spectroscopy, the factors limiting their performances have been unraveled. This study contributes to better understand the connection between photochromic and photovoltaic properties, which is key to develop better performing molecules of this class.