Johan Liotier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Johan Liotier has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Renaud Demadrille
IRIG‐SyMMES CEA CNRS Grenoble INP Université Grenoble Alpes Grenoble France
7 shared publications - Antonio J. Riquelme
IRIG-SyMMES, Université Grenoble Alpes/CEA/CNRS/Grenoble INP 38000 Grenoble France
5 shared publications - Juan Antonio Anta
Center for Nanoscience and Sustainable Technologies (CNATS) Department of Physical, Chemical, and Natural Systems Universidad Pablo de Olavide Sevilla Spain
4 shared publications - Jürgen Rühe
Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg, Germany
3 shared publications - Pascale Maldivi
Univ. Grenoble Alpes, CEA, CNRS, Gre-INP, IRIG-SyMMES, 38000 Grenoble, France
3 shared publications - Quentin Huaulmé
Univ. Grenoble Alpes CNRS, CEA, SyMMES, 17 rue des martyrs Grenoble 38000 France
3 shared publications
Latest Publications
- Open Access
- 9 October 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (20) , 11514-11522
Fine Tuning of Thermal Activation and C,H-Insertion Crosslinking of Phenyl Diazo Ester Polymers
We describe the synthesis and crosslinking of polymers containing substituted phenyl diazo ester moieties. The diazo groups, which are dormant at room temperature, can be thermally activated to generate carbenes by releasing nitrogen. This subsequently causes C−H insertion crosslinking (CHic) of the polymers. The rates of carbene formation and crosslinking can be controlled by appropriate choice of the substituents at the phenyl ring. The Hammett equation can be used to predict how electron-donating or electron-withdrawing groups on the aromatic ring influence the activation and crosslinking behavior of the polymer, which allows tailoring of the process to a specific application. With the appropriate substitution pattern, diazo polymers can be designed to undergo thermal crosslinking under mild conditions. Thermally induced crosslinking of polymer films can be performed (gel content >80%) at temperatures as low as 40 °C within hours, or at 110 °C within seconds.
- 9 October 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (20) , 11514-11522
Open AccessFine Tuning of Thermal Activation and C,H-Insertion Crosslinking of Phenyl Diazo Ester Polymers
We describe the synthesis and crosslinking of polymers containing substituted phenyl diazo ester moieties. The diazo groups, which are dormant at room temperature, can be thermally activated to generate carbenes by releasing nitrogen. This subsequently causes C−H insertion crosslinking (CHic) of the polymers. The rates of carbene formation and crosslinking can be controlled by appropriate choice of the substituents at the phenyl ring. The Hammett equation can be used to predict how electron-donating or electron-withdrawing groups on the aromatic ring influence the activation and crosslinking behavior of the polymer, which allows tailoring of the process to a specific application. With the appropriate substitution pattern, diazo polymers can be designed to undergo thermal crosslinking under mild conditions. Thermally induced crosslinking of polymer films can be performed (gel content >80%) at temperatures as low as 40 °C within hours, or at 110 °C within seconds.
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Synthèse et études de colorants organiques photochromes pour la réalisation de cellules solaires à transmission optique variable
Dans le contexte actuel d’épuisement des ressources fossiles et de changement climatique global, la production d’énergie renouvelable devient une nécessité. Dans ce cadre, les technologies solaires présentent un grand intérêt notamment en France où l’ensoleillement est important tout au long de l’année. Parmi ces technologies, les cellules solaires à colorant présentent de bonnes performances photovoltaïques avec des efficacités reportées dans la littérature jusqu’à 14,3 %. Ces cellules peuvent être conçues semi-transparentes ce qui en fait de bons candidats pour une intégration dans les bâtiments, il serait en effet possible de les intégrer en tant que façade ou vitrage. Cette perspective induit cependant de nouveaux questionnement sur le compromis à trouver entre la transparence et l’efficacité des cellules qui est fixée lors de la fabrication de celles-ci. En effet, une intégration en tant que vitrage demande de laisser passer une quantité de lumière suffisante sans altérer la qualité de la perception des couleurs en intérieur. Pour contourner les limitations actuelles de cette technologie, nous avons envisagé de modifier la structure classique des colorants utilisés pour la fabrication de ces cellules en introduisant un motif photochrome naphtopyrane. Une première étude a permis d’identifier le colorant NPI permettant d’obtenir des cellules solaires atteignant des rendements de conversion supérieurs à 4 % tout en conservant ses propriétés photochromes en cellules. Ces propriétés photochromes étudiées par spectroscopie UV-Vis en solution et en cellules démontrent un changement de couleur réversible de cette molécule avec une décoloration complète en 1 heure en solution et 16 heures en cellules. Différentes modifications chimiques ont ensuite été réalisée sur les différents motifs présents sur ce colorant dans le but d’établir des relations structures propriétés claires entre la structure des molécules et leurs propriétés optiques, photochromes et photovoltaïques. Cette étude a été complétée par la mise en place de techniques de caractérisation des couleurs permettant d’étudier la transparence et le CRI des cellules solaires. Deux méthodes analytiques ont aussi été développées dans le but de comprendre les détails du processus de coloration et décoloration des molécules. La première est une méthode spectroscopique avec irradiation in-situ d’une solution de photochrome dans une sonde RMN et la seconde une méthode de calcul par DFT des états de transition des molécules lors de la refermeture. Enfin, la mise en place d’un programme Python de Machine Learning couplé à la mise en place de plans d’expériences a permis l’optimisation rapide d’électrolytes contenant des médiateurs rédox de différentes natures permettant une augmentation des performances et de la transparence des cellules. Ces travaux ont permis d’obtenir plus d’une vingtaine de colorants présentant propriétés optiques variées. Ces molécules possèdent des domaines d’absorption larges dans la partie visible du spectre solaire avec des longueurs d’onde maximales d’absorption qui varient de 470 nm à 655 nm. Elles présentent ainsi des couleurs allant du vert à l’orange en passant par le violet ou le rouge. Les efficacités photovoltaïques de ces colorants, pionnier dans ce domaine, ont été étudiées et certains d’entre eux présentent des efficacités supérieures à 4.1%.
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Synthèse et études de colorants organiques photochromes pour la réalisation de cellules solaires à transmission optique variable
Dans le contexte actuel d’épuisement des ressources fossiles et de changement climatique global, la production d’énergie renouvelable devient une nécessité. Dans ce cadre, les technologies solaires présentent un grand intérêt notamment en France où l’ensoleillement est important tout au long de l’année. Parmi ces technologies, les cellules solaires à colorant présentent de bonnes performances photovoltaïques avec des efficacités reportées dans la littérature jusqu’à 14,3 %. Ces cellules peuvent être conçues semi-transparentes ce qui en fait de bons candidats pour une intégration dans les bâtiments, il serait en effet possible de les intégrer en tant que façade ou vitrage. Cette perspective induit cependant de nouveaux questionnement sur le compromis à trouver entre la transparence et l’efficacité des cellules qui est fixée lors de la fabrication de celles-ci. En effet, une intégration en tant que vitrage demande de laisser passer une quantité de lumière suffisante sans altérer la qualité de la perception des couleurs en intérieur. Pour contourner les limitations actuelles de cette technologie, nous avons envisagé de modifier la structure classique des colorants utilisés pour la fabrication de ces cellules en introduisant un motif photochrome naphtopyrane. Une première étude a permis d’identifier le colorant NPI permettant d’obtenir des cellules solaires atteignant des rendements de conversion supérieurs à 4 % tout en conservant ses propriétés photochromes en cellules. Ces propriétés photochromes étudiées par spectroscopie UV-Vis en solution et en cellules démontrent un changement de couleur réversible de cette molécule avec une décoloration complète en 1 heure en solution et 16 heures en cellules. Différentes modifications chimiques ont ensuite été réalisée sur les différents motifs présents sur ce colorant dans le but d’établir des relations structures propriétés claires entre la structure des molécules et leurs propriétés optiques, photochromes et photovoltaïques. Cette étude a été complétée par la mise en place de techniques de caractérisation des couleurs permettant d’étudier la transparence et le CRI des cellules solaires. Deux méthodes analytiques ont aussi été développées dans le but de comprendre les détails du processus de coloration et décoloration des molécules. La première est une méthode spectroscopique avec irradiation in-situ d’une solution de photochrome dans une sonde RMN et la seconde une méthode de calcul par DFT des états de transition des molécules lors de la refermeture. Enfin, la mise en place d’un programme Python de Machine Learning couplé à la mise en place de plans d’expériences a permis l’optimisation rapide d’électrolytes contenant des médiateurs rédox de différentes natures permettant une augmentation des performances et de la transparence des cellules. Ces travaux ont permis d’obtenir plus d’une vingtaine de colorants présentant propriétés optiques variées. Ces molécules possèdent des domaines d’absorption larges dans la partie visible du spectre solaire avec des longueurs d’onde maximales d’absorption qui varient de 470 nm à 655 nm. Elles présentent ainsi des couleurs allant du vert à l’orange en passant par le violet ou le rouge. Les efficacités photovoltaïques de ces colorants, pionnier dans ce domaine, ont été étudiées et certains d’entre eux présentent des efficacités supérieures à 4.1%.
- Open Access
- 17 October 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (23)
Light Induced Training of 3D Printed Mechanical Metamaterials
Stimuli‐responsive materials often react to changes in environmental conditions by altering their shape. Here, it is shown that even changes in materials that are not directly observable, such as local stiffening, can be exploited to introduce the concept of trainable materials. A fully 3D‐printable filament based on thermoplastic polyurethane (TPU) functionalized with a bivalent crosslinker capable of undergoing a C,H insertion reaction under UV irradiation was developed. Specimens printed from this filament demonstrate a gradual increase in stiffness, reaching almost 300% of their initial stiffness after 50 hours of irradiation. To exploit this tunability, mechanical metamaterials incorporating the developed material are engineered. By utilizing an instability‐driven transformation under compression, it is demonstrated how local stiffening can be amplified through rational design. Moreover, by exploiting the unusual mechanical behavior of metamaterials arising from their internal architecture, a closed‐loop system is presented in which, under compressive load, the metamaterial closes an electric circuit that activates UV light, which in turn modifies the properties of the base material. Through this approach, two trainable systems are realized: one that progressively conforms its shape to mechanical compression, and another that gradually increases its resistance to an applied force, mimicking the physical training of biological tissues.
- 17 October 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (23)
Open AccessLight Induced Training of 3D Printed Mechanical Metamaterials
Stimuli‐responsive materials often react to changes in environmental conditions by altering their shape. Here, it is shown that even changes in materials that are not directly observable, such as local stiffening, can be exploited to introduce the concept of trainable materials. A fully 3D‐printable filament based on thermoplastic polyurethane (TPU) functionalized with a bivalent crosslinker capable of undergoing a C,H insertion reaction under UV irradiation was developed. Specimens printed from this filament demonstrate a gradual increase in stiffness, reaching almost 300% of their initial stiffness after 50 hours of irradiation. To exploit this tunability, mechanical metamaterials incorporating the developed material are engineered. By utilizing an instability‐driven transformation under compression, it is demonstrated how local stiffening can be amplified through rational design. Moreover, by exploiting the unusual mechanical behavior of metamaterials arising from their internal architecture, a closed‐loop system is presented in which, under compressive load, the metamaterial closes an electric circuit that activates UV light, which in turn modifies the properties of the base material. Through this approach, two trainable systems are realized: one that progressively conforms its shape to mechanical compression, and another that gradually increases its resistance to an applied force, mimicking the physical training of biological tissues.
- Open Access
- 7 March 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (11) , 3803-3814
Data-driven modelling for electrolyte optimisation in dye-sensitised solar cells and photochromic solar cells
Because they can be made semi-transparent, dye-sensitised solar cells (DSSCs) have great potential for glazing applications. Their photovoltaic performance and light transmission depend not only on the dye used, but also on the electrolyte they contain. A few years ago, we introduced the concept of solar cells with dynamic optical properties based on the use of photochromic photosensitizers. These cells allow variable light transmission according to sunlight conditions, while producing electrical energy. We found that the electrolytes commonly used in DSSCs are not optimal for this class of photosensitisers and need to be tuned. In this work, we have developed and characterised two new photochromic dyes for use in solar cells and we present a study aimed at developing electrolytes specifically adapted to these dyes. Using a methodology based on the design of experiments (DoE) combined with a machine learning (ML) approach, we show that it is possible to quickly find an optimal formulation for iodine-based electrolytes to achieve good transparency of photochromic devices with an AVT ranging from 57% to 23% across the photochromic process, while keeping the photovoltaic conversion efficiency above 2.9%. We show that this approach can be applied to other classes of electrolytes with different redox systems, such as TEMPO/TEMPO+. After optimisation, TEMPO-based electrolytes yielded photochromic semi-transparent solar cells with a PCE of up to 2.16% and an AVT varying between 55% and 13% and opaque photochromic cells with a PCE of 3.46%. Finally, this new TEMPO-based electrolyte was tested with a non-photochromic dye and gave a PCE of up to 7.64%, which is probably the highest performance to date for a dye solar cell using a pure TEMPO/TEMPO+ redox system.
- 7 March 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 12 (11) , 3803-3814
Open AccessData-driven modelling for electrolyte optimisation in dye-sensitised solar cells and photochromic solar cells
Because they can be made semi-transparent, dye-sensitised solar cells (DSSCs) have great potential for glazing applications. Their photovoltaic performance and light transmission depend not only on the dye used, but also on the electrolyte they contain. A few years ago, we introduced the concept of solar cells with dynamic optical properties based on the use of photochromic photosensitizers. These cells allow variable light transmission according to sunlight conditions, while producing electrical energy. We found that the electrolytes commonly used in DSSCs are not optimal for this class of photosensitisers and need to be tuned. In this work, we have developed and characterised two new photochromic dyes for use in solar cells and we present a study aimed at developing electrolytes specifically adapted to these dyes. Using a methodology based on the design of experiments (DoE) combined with a machine learning (ML) approach, we show that it is possible to quickly find an optimal formulation for iodine-based electrolytes to achieve good transparency of photochromic devices with an AVT ranging from 57% to 23% across the photochromic process, while keeping the photovoltaic conversion efficiency above 2.9%. We show that this approach can be applied to other classes of electrolytes with different redox systems, such as TEMPO/TEMPO+. After optimisation, TEMPO-based electrolytes yielded photochromic semi-transparent solar cells with a PCE of up to 2.16% and an AVT varying between 55% and 13% and opaque photochromic cells with a PCE of 3.46%. Finally, this new TEMPO-based electrolyte was tested with a non-photochromic dye and gave a PCE of up to 7.64%, which is probably the highest performance to date for a dye solar cell using a pure TEMPO/TEMPO+ redox system.
- Open Access
- 10 January 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (10) , 1139-1145
Upcycling polyethersulfones to luminescent materials by aminolysis
The upcycling of polyethersulfone (PES), a high-performance polymer based on aromatic aryl-ether backbone, can yield both the starting comonomer bisphenol S and valuable OLED derivatives, providing a complete atom valorization strategy for PES waste.
- 10 January 2025
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (10) , 1139-1145
Open AccessUpcycling polyethersulfones to luminescent materials by aminolysis
The upcycling of polyethersulfone (PES), a high-performance polymer based on aromatic aryl-ether backbone, can yield both the starting comonomer bisphenol S and valuable OLED derivatives, providing a complete atom valorization strategy for PES waste.
- Open Access
- 8 December 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (4) , 1859-1866
Universal Cross-Linking of Nonfunctional Polymers through C,H-Insertion Reactions
- 8 December 2024
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (4) , 1859-1866
Open AccessUniversal Cross-Linking of Nonfunctional Polymers through C,H-Insertion Reactions
- Open Access
- 27 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Polyethersulfones upcycling to luminescent materials by aminolysis
Upcycling of polyethersulfone (PES), a high-performance polymer based on an aromatic-rich aryl-ether-based backbone, can advantageously yield both starting Bisphenol S (BPS) comonomer and valuable OLED derivatives, providing complete atom valorisation strategy for PES waste. Deprotonated selected amines proved particularly efficient at depolymerizing PES at moderate temperatures (~ 120 °C). The recycled monomer yields validate the back-to-monomer chemical recycling method for industrial compliance. The OLED derivatives afforded by the same simple process can easily be isolated and promote an innovative upcycling strategy using polymer-to-valuable chemicals, a very relevant approach to help tackle the ever-growing plastic waste remediation.
- 27 August 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPolyethersulfones upcycling to luminescent materials by aminolysis
Upcycling of polyethersulfone (PES), a high-performance polymer based on an aromatic-rich aryl-ether-based backbone, can advantageously yield both starting Bisphenol S (BPS) comonomer and valuable OLED derivatives, providing complete atom valorisation strategy for PES waste. Deprotonated selected amines proved particularly efficient at depolymerizing PES at moderate temperatures (~ 120 °C). The recycled monomer yields validate the back-to-monomer chemical recycling method for industrial compliance. The OLED derivatives afforded by the same simple process can easily be isolated and promote an innovative upcycling strategy using polymer-to-valuable chemicals, a very relevant approach to help tackle the ever-growing plastic waste remediation.
- 2 November 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (21) , 9378-9389
Triisopropylsilylethynyl-Functionalized Anthracene-Based Hole Transport Materials for Efficient Hybrid Lead Halide Perovskite Solar Cells
- 2 November 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (21) , 9378-9389
Triisopropylsilylethynyl-Functionalized Anthracene-Based Hole Transport Materials for Efficient Hybrid Lead Halide Perovskite Solar Cells
- Open Access
- 4 January 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (8)
Strategies to Improve the Photochromic Properties and Photovoltaic Performances of Naphthopyran Dyes in Dye‐Sensitized Solar Cells
Semi‐transparent solar cells are emerging as promising devices for building integrated photovoltaics. However, regardless of the technology considered, the optical transmission of semi‐transparent solar cells is fixed during the fabrication process, and hence, cannot adjust to variations in daylight or weather conditions. This becomes an issue when applications such as photovoltaic windows are envisioned. Previously, it has been reported that the use of photochromic naphthopyran dyes in dye‐sensitized solar cells (DSSC) allows for the fabrication of semi‐transparent devices capable of modulating their light transmission and energy production depending on light intensity. Herein, a series of naphthopyran dyes with an identical pi‐conjugated backbone and varying alkyl substituents is reported. Using this molecular engineering strategy, the control of the discoloration kinetics of the photochromic dyes and the reduction of undesirable recombination processes when utilised in solar cells is demonstrated. The clear photochromic‐photovoltaic structure‐property relationships for these new photosensitizers is established and they are shown to demonstrate improved photovoltaic performances and photochromic responses in DSSC with notably faster discoloration than previously reported. For the first time with photochromic molecules, the co‐sensitization of the electrodes is explored and the highest power conversion efficiency for a photochromic DSSC is reported, reaching up to 4.34% under standard conditions.
- 4 January 2023
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (8)
Open AccessStrategies to Improve the Photochromic Properties and Photovoltaic Performances of Naphthopyran Dyes in Dye‐Sensitized Solar Cells
Semi‐transparent solar cells are emerging as promising devices for building integrated photovoltaics. However, regardless of the technology considered, the optical transmission of semi‐transparent solar cells is fixed during the fabrication process, and hence, cannot adjust to variations in daylight or weather conditions. This becomes an issue when applications such as photovoltaic windows are envisioned. Previously, it has been reported that the use of photochromic naphthopyran dyes in dye‐sensitized solar cells (DSSC) allows for the fabrication of semi‐transparent devices capable of modulating their light transmission and energy production depending on light intensity. Herein, a series of naphthopyran dyes with an identical pi‐conjugated backbone and varying alkyl substituents is reported. Using this molecular engineering strategy, the control of the discoloration kinetics of the photochromic dyes and the reduction of undesirable recombination processes when utilised in solar cells is demonstrated. The clear photochromic‐photovoltaic structure‐property relationships for these new photosensitizers is established and they are shown to demonstrate improved photovoltaic performances and photochromic responses in DSSC with notably faster discoloration than previously reported. For the first time with photochromic molecules, the co‐sensitization of the electrodes is explored and the highest power conversion efficiency for a photochromic DSSC is reported, reaching up to 4.34% under standard conditions.
- Open Access
- 8 August 2022
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 6 (20) , 2994-3005
Photochromic spiro-indoline naphthoxazines and naphthopyrans in dye-sensitized solar cells
Photochromic dyes possess unique properties that can be exploited in different domains. Here, we investigate the potential of spiro-indoline naphthopyran and spiro-indoline naphthoxazine dyes in photovoltaics.
- 8 August 2022
- Published by Royal Society of Chemistry (RSC) in Materials Chemistry Frontiers
- Vol. 6 (20) , 2994-3005
Open AccessPhotochromic spiro-indoline naphthoxazines and naphthopyrans in dye-sensitized solar cells
Photochromic dyes possess unique properties that can be exploited in different domains. Here, we investigate the potential of spiro-indoline naphthopyran and spiro-indoline naphthoxazine dyes in photovoltaics.