JLJeonghoon Lee

Jeonghoon Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jeonghoon Lee has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physical and optical properties of black carbon observed at the 303-meter-high Tower in the urban environment. 

    by Saehee Lim, Yongjoo Choi, Jeonghoon Lee, Junsu Gil, I Seul Cho, Ji Young Kim, Sumin Kim

    Urban air pollution has consistently captured social and scientific attention due to its significant health and climatic impacts. Among the short-lived climate pollutants (SLCPs) targeted for reduction, black carbon (BC) stands out as a critical component. BC is a carbonaceous primary aerosol emitted from fossil fuel and biomass combustion, with an atmospheric lifetime of approximately five days.This study involved a tower-based field campaign conducted in late spring in Incheon, a South Korean city adjacent to the Yellow Sea. Using a Single-Particle Soot Photometer (SP2; Droplet Measurement Technology, Boulder, CO, USA), refractory black carbon (rBC) properties, including concentrations, size distribution, and mixing state, were monitored for two weeks in May 2023 at the 303-meter-high Posco Tower-Songdo (PT).The average ± standard deviation mass concentration of rBC was 0.2±0.1 μg m⁻³, with the mass median diameter (MMD) ranging from 133 to 227 nm. The highest mass concentration and the lowest MMD and Rshell/core (the ratio of shell-to-core diameter of rBC) were observed at 10 a.m. daily, indicating the arrival of freshly emitted local rBC particles. During pollution events characterized by elevated PM2.5 and O3 levels, Rshell/core increased to 1.4–2.0. The mass absorption cross-section (MAC) at 550 nm, estimated using the BHCOAT implementation of Mie theory with input of measured diameter and coating thickness of individual rBC particle, was enhanced by a factor of 1.7 (Eabs). Eabs was positively correlated with Ox (NO2+O3) and aerosol liquid water content (ALWC). Notably, the highest Eabs coincided with relative humidity (RH) exceeding 70% and ALWC reaching ~30 μg m⁻³. These results suggest that under high atmospheric oxidation states, coating formation on the rBC surface is enhanced, promoting the development of hygroscopic aerosols on BC particles in this urban area. More detailed analysis will be presented in the meeting. This research was supported by the National Institute of Environ- mental Research (NIER) grants funded by the Korean government (NIER-2023-01-02-083) and the National Research Foun- dation of Korea (NRF) from the Ministry of Science and ICT (NRF- 2021R1C1C2011543 & RS-2023-00249553). We thank POSCO International for establishing and maintaining the site.

  • The Current Status and Prospect of Air Quality Management Technologies in the Era of Carbon Neutrality

    by Bangwoo Han, Yun-Haeng Joe, Jeonghoon Lee, Soon-Bark Kwon, Dae Seong Kim, Gunhee Lee, Kee-Jung Hong, Inyong Park, Dae Hoon Park

  • Open Access

    Application of coflow premixed flame for generating aggregate silica particles and its limitation

    by Sowon Sheen, Jeonghoon Lee, Chang Gyu Woo

    This paper reports the geometrical characteristics and the growth of aggregate silica particles generated in a premixed flame using thermophoretic sampling, a light scattering technique, and aggregate dynamics modeling only for a premixed flat flame condition. The area equivalent size and the morphology of thermophoretically collected silica aggregate particles were analyzed through images taken from a transmission electron microscope. The particle stream in flames was visualized through a planar light scattering technique. Light scattering intensity at 90° using an Ar-ion laser (wavelength, 514 nm) was monitored for various flame conditions. The results of aggregate dynamics modeling under a one-dimensional assumption indicated that the silica particles grew as the height above the burner increased. Aggregate particles produced at various equivalence ratios showed different levels of OH-species. The OH-related species increased as the equivalence ratio decreased, which implies that a high equivalence ratio is recommended to produce pure silica particles. In this study, the purest silica aggregate particles were produced at the equivalence ratio of 11.4, among others. Our study helps to determine which flame condition is best in terms of the quality and/or quantity of silica aggregate particles generated by a coflow burner.


  • Control of the size of nanoparticles by spark discharge with an atomizer and a bubbler

    by Seung Ryul Noh, Wooik Jung, Sukbyung Chae, Bangwoo Han, Jeonghoon Lee, Chang Gyu Woo

    We propose a simple method to control the size of nanoparticle generated by spark discharge. Nanoparticle characteristics are of importance for numerous applications. Property control can lead to desired applications. The spark discharge method can generate nanoparticles of high purity with ease. A pin-to-plate type spark discharge-nanoparticle generator (SDG) solely created approximately 1 .3×108 metal particles/cm3 of geometric mean diameter (GMD) of 20.4 nm. Instead of pure gas, ethanol vapor and droplets from an atomizer were introduced into the SDG. The GMD was increased to 40.0 nm similar to the size of particles generated from the atomizer. The differences in discharge voltage and frequency were too small to change nanoparticle characteristics. To investigate this phenomenon, a bubbler replaced the atomizer and various solvents were used such as ethanol, methanol, and water. The GMD was reduced to 14.6 nm when the methanol bubbler was used. Organic solvent decreased GMD with decreased number concentration, while water did not contribute to the change in particle size. This suggests that vapor from the bubbler suppresses homogeneous nucleation while droplets from the atomizer induce heterogeneous nucleation. This research can be applied to nanoparticle control techniques for production processes. Copyright © 2022 American Association for Aerosol Research

  • Open Access

    Elemental Carbon and Its Fractions during Evolved Gas Analysis with Respect to Pyrolytic Carbon and Split Time

    by Juhan Lee, Dohyun Kim, Jeonghoon Lee

    We demonstrated the relationships between elemental carbon (EC) and EC fractions during evolved gas analysis (EGA) for PM2.5 sampled at KOREATECH from 29 March 2018 to 12 May 2018. The EC concentrations were compared to the concentrations of equivalent black carbon to confirm that the level of EC concentrations analyzed in this study was valid. Among various EC fractions and their combination, EC1+EC3 fractions were best correlated with the EC concentrations. Especially, dominant EC fraction was related with the dependence of carbon oxidation quantity on the oxidation temperature. We also examined the relationships between pyrolytic carbon (PyC) and EC concentration with respect to the split time. PyC was correlated with the split time in the phase of oxygen-helium mixture. PyC was close to zero for the split time in the helium phase. It is novel, as far as the authors know, that the correlation between PyC and the split time under NIOSH 5040 protocol was reported with regard to EGA. We believe that our study helps to identify what causes uncertainty in the quantification of PyC.


  • Open Access

    Vertical Measurement of Equivalent Black Carbon Concentration at Low Altitude

    by Jeonghoon Lee, Jiseung Park, Juhyung Kim

    The vertical profile of equivalent black carbon (eBC) concentrations has been measured together with the temperature up to 130 m above ground level at several locations. A hexacopter was deployed for the measurement of eBC, and the temperature on typical days in winter, spring, summer and early autumn. We observed high eBC concentrations between 10 m and 90 m above ground level, which was related to the vertical distribution of temperature. We examined that the measurement noise could be reduced by using a box-average scheme. Furthermore, the negative values at low eBC concentration could be removed for an averaging time of 30 min or longer.


  • Open Access

    Measurement of Light Absorbing Aerosols with Folded-Jamin Photothermal Interferometry

    by Jeonghoon Lee, Hans Moosmüller

    In this study, a photothermal interferometer was developed, based on a folded-Jamin polarization instrument with refractive-index sensitive configuration, in order to characterize light-absorbing aerosols. The feasibility of our interferometric technique was demonstrated by performing photothermal spectroscopy characterizing spark-generated black carbon particles with atmospherically relevant concentrations and atmospheric aerosols in a metropolitan area. The sensitivity of this interferometric system for both laboratory-generated aerosols and atmospheric aerosols was ~ 1 (μg/m3)/μV, which is sufficient for the monitoring of black carbon aerosol in urban areas.


  • Open Access

    The role of HONO in O 3 formation and insight into its formation mechanism during the KORUS-AQ Campaign

    by Junsu Gil, Jeonghwan Kim, Meehye Lee, Gangwoong Lee, Dongsoo Lee, Jinsang Jung, Joonyeong An, Jinkyu Hong, Seogju Cho, Jeonghoon Lee, et al.

    Photolysis of nitrous acid (HONO) has long been recognized as an early morning source of OH radicals in urban air, but the detailed mechanism of its formation is still unclear. During the Korea-US Air Quality (KORUS-AQ) campaign, HONO was measured using Quantum Cascade Tunable Diode Laser Absorption Spectroscopy (QC-TDLAS) at Olympic Park in Seoul from 17 May to 10 June, 2016. HONO concentrations ranged from 0.07 ppbv to 3.46 ppbv with an average of 0.93 ppbv. HONO remained high at night from 1 am to 5 am, during which the mean concentration was higher in high-O3 episodes (1.82 ppbv) than non-episode (1.20 ppbv). In the morning, OH budget due to HONO photolysis were higher by 50 % (0.95 pptv) during high-O3 episodes compared to non-episode. Diurnal variations of HOx and O3 simulated by the F0AM model demonstrated a difference of ~ 20 ppbv in daily maximum O3 between the two periods. The HONO concentration increased with relative humidity (RH) until 80 %, of which the highest HONO was associated with the top 10 % NOx, confirming that NOx is a crucial precursor of HONO and its formation is facilitated by humidity. The conversion ratio of NOx to HONO was estimated to be 0.86 × 10−2 h−1 at night and also increased with RH. As surrogate for the catalyst surface, the mass concentrations of black carbon (eBC) and the surface areas of particles smaller than 120 nm showed a tendency for RH similar to conversion ratio. Using an Artificial Neuron Network (ANN) model, HONO concentrations were successfully simulated with measured variables (r = 0.8 for the best suite), among which NOx, surface area, and RH were found to be main factors affecting ambient HONO concentrations with weigh values of 26.2 %, 11.9 %, and 10.6 %, respectively. This study demonstrates the coupling of HONO with HOx-VOCs-O3 cycle in Seoul Metropolitan Areas (SMA) and provides practical evidence for heterogeneous formation of HONO by employing the ANN model to atmospheric chemistry.