Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Yao has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Factors Influencing the Properties of Extrusion-Based 3D-Printed Alkali-Activated Fly Ash-Slag Mortar

    by Qiang Yuan, Chao Gao, Tingjie Huang, Shenghao Zuo, Hao Yao, Kai Zhang, Yanling Huang, Jing Liu

    The mix proportioning of extrusion-based 3D-printed cementitious material should balance printability and hardened properties. This paper investigated the effects of three key mix proportion parameters of 3D-printed alkali-activated fly ash/slag (3D-AAFS) mortar, i.e., the sand to binder (s/b) ratio, fly ash/ground granulated blast-furnace slag (FA/GGBS) ratio, and silicate modulus (Ms) of the activator, on extrudability, buildability, interlayer strength, and drying shrinkage. The results showed that the loss of extrudability and the development of buildability were accelerated by increasing the s/b ratio, decreasing the FA/GGBS ratio, or using a lower Ms activator. A rise in the s/b ratio improved the interlayer strength and reduces the drying shrinkage. Although increasing the FA/GGBS mass ratio from 1 to 3 led to a reduction of 35% in the interlayer bond strength, it decreased the shrinkage strain by half. A larger silicate modulus was beneficial to the interlayer bond strength, but it made shrinkage more serious. Moreover, a simple centroid design method was developed for optimizing the mix proportion of 3D-AAFS mortar to simultaneously meet the requirements of printability and hardened properties.


  • Open Access

    A Novel Organic–Inorganic Hybrid Admixture for Increasing Flowability and Reducing Viscosity of Ultra-High Performance Paste

    by Min Wang, Hao Yao

    The low flowability and high viscosity of ultra-high performance concrete (UHPC), which is mainly caused by the silica fume (SF) agglomeration and low water–binder ratio, is a severe defect in its engineering applications. Herein, a novel organic–inorganic hybrid (OIH) admixture was synthesized by grafting comb-like polycarboxylate ether (PCE) onto the surface of SF. On the one hand, PCE-grafting could effectively prevent SF agglomeration and improve the dispersion of SF core. The reason being the consumption of polar silicon hydroxyl (Si-OH) groups on the surface of SF and the steric hindrance effect generated from PCE arms. On the other hand, OIH admixture could adsorb onto the surface of cement and SF particles by electrostatic interaction, exhibiting stronger steric hindrance effect than traditional comb-like PCE. As a result, UHPC system with this star-like OIH admixture presented high flowability and low viscosity at low water–binder ratio (0.18).


  • Open Access

    Comparison Study on the Adsorption Behavior of Chemically Functionalized Graphene Oxide and Graphene Oxide on Cement

    by Min Wang, Hao Yao

    Chemical functionalization of graphene oxide (GO) is one kind of advanced strategy to eliminate the negative effects on the flowability of cement with GO. The adsorption behavior of admixture on cement plays a vital role in the flowability of cement-based materials. Herein, the comparison study on the adsorption behavior (including adsorption amount, adsorption kinetics, adsorption isotherms and adsorption layer thickness) of three kinds of chemically functionalized graphene oxides (CFGOs) with different polyether amine branched-chain lengths and GO on cement is reported. The results of CFGOs and GO adsorption data on cement particles were all best fitted with the pseudo-second-order kinetic model, and also conformed to the Freundlich isothermal model, indicating that the adsorption of CFGOs and GO on cement both were multilayer type and took place in a heterogeneous manner. The adsorption of CFGOs and GO on cement was not just physical adsorption, but also engaged chemical adsorption. In contrast to GO, the adsorption behavior of CFGOs on cement represented a lesser adsorption amount, weaker adsorption capacity and thinner adsorption layer thickness. Moreover, the longer the branched-chain length of CFGOs, the greater the decreasing degrees of adsorption amount, adsorption capacity and adsorption layer thickness. Due to the consumption of the carboxyl group (-COOH) by chemical functionalization, the anchoring effect of CFGOs was weaker than GO, and the steric hindrance effect generated from branched-chains which weakened the van der Waals forces among CFGOs layers. Moreover, the steric hindrance effect strengthened with the increasing branched-chain length, thus preventing the cement particles from aggregation, which resulted in satisfactory flowability of CFGOs with incorporation of cement rather than GO.