Gulseren Dagdelenler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gulseren Dagdelenler has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Harun Sonmez
Faculty of Engineering, Geological Engineering Department, Applied Geology Division, Hacettepe University, Beytepe-Ankara, Turkey
5 shared publications - Candan Gokceoglu
Faculty of Computer and Information Sciences, Cappadocia University, Mustafapasa, Urgup, Türkiye
3 shared publications - Hakan Ahmet Nefeslioglu
Institute of Earth and Space Sciences, Eskisehir Technical University, Tepebasi, Eskisehir 26555, Türkiye
2 shared publications Murat Ercanoglu
2 shared publications- Murat Ercanoglu
Hacettepe University
2 shared publications Burcu Kahraman
Hacettepe Univ, Dept Geol Engn, TR-06800 Ankara, Turkey
1 shared publication
Latest Publications
- Open Access
- 6 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11821
An ANN–Driven Excavatability Chart Integrating GSI and Rock Mass Strength
Excavation is a common requirement in engineering construction within rock masses. While excavation volumes are generally limited in road slope projects, they may become substantial in large-scale operations such as deep open pit mines. The interaction between time and cost in excavation processes is strongly controlled by rock mass excavatability, which has been recognized as a key factor in project budgets. Since the 1970s, excavatability assessment has therefore attracted considerable research interest in rock mechanics. In this study, the excavatability cases previously plotted on the Geological Strength Index (GSI) versus Uniaxial Compressive Strength of the Rock Mass (σc_rm) diagram in the literature were improved by employing an Artificial Neural Network (ANN). The ANN approach was used to investigate the boundaries between digger, ripper, and hammer+blasting excavation classes within the available case zones defined by GSI–σc_rm data pairs. The prediction performance of the developed rock mass excavatability chart is highly acceptable, with correct classification rates of 91.1% for blasting+hammer and ripper classes, and 87.2% for the ripper class. Considering GSI and σc_rm as the main input parameters, the proposed ANN-oriented excavatability chart is highly acceptable for preliminary equipment selection during the design stage of surface rock mass excavations, including slope cases.
- 6 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (21) , 11821
Open AccessAn ANN–Driven Excavatability Chart Integrating GSI and Rock Mass Strength
Excavation is a common requirement in engineering construction within rock masses. While excavation volumes are generally limited in road slope projects, they may become substantial in large-scale operations such as deep open pit mines. The interaction between time and cost in excavation processes is strongly controlled by rock mass excavatability, which has been recognized as a key factor in project budgets. Since the 1970s, excavatability assessment has therefore attracted considerable research interest in rock mechanics. In this study, the excavatability cases previously plotted on the Geological Strength Index (GSI) versus Uniaxial Compressive Strength of the Rock Mass (σc_rm) diagram in the literature were improved by employing an Artificial Neural Network (ANN). The ANN approach was used to investigate the boundaries between digger, ripper, and hammer+blasting excavation classes within the available case zones defined by GSI–σc_rm data pairs. The prediction performance of the developed rock mass excavatability chart is highly acceptable, with correct classification rates of 91.1% for blasting+hammer and ripper classes, and 87.2% for the ripper class. Considering GSI and σc_rm as the main input parameters, the proposed ANN-oriented excavatability chart is highly acceptable for preliminary equipment selection during the design stage of surface rock mass excavations, including slope cases.
- Open Access
- 15 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6714
A Practical Quantitative Tool Based on the EXCASS System for the Use of Hoek-Brown’s Disturbance Factor in Slope Excavations
The disturbance factor (D) in the Hoek–Brown criterion quantifies excavation-induced rock mass disturbance. Although D is conceptually defined as a continuous parameter ranging from 0 to 1, the most recent Hoek–Brown guidelines provide descriptions only for boundary conditions related to slopes and tunnels. In slope excavations, the degree of disturbance is governed not only by the excavation method but also by the thickness of the removed overburden, with its influence becoming particularly significant in deep excavations. In recent years, the concept of a transitional disturbance factor, varying with depth from the excavation surface, has gained increasing attention. To address this need, the EXCASS system, an empirical method for selecting appropriate excavation techniques based on the Geological Strength Index (GSI) and point load strength (Is50) values, was integrated into the transitional disturbance factor framework in this study. EXCASS allows for the selection of stronger or weaker excavation methods, offering flexibility to control the degree of disturbance induced in the rock mass. Moreover, the disturbance factor at the excavation surface was determined by incorporating both the operational excavation power index and the thickness of the removed overburden. This integrated approach enables a more realistic evaluation of excavation-induced damage in slope stability analyses.
- 15 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6714
Open AccessA Practical Quantitative Tool Based on the EXCASS System for the Use of Hoek-Brown’s Disturbance Factor in Slope Excavations
The disturbance factor (D) in the Hoek–Brown criterion quantifies excavation-induced rock mass disturbance. Although D is conceptually defined as a continuous parameter ranging from 0 to 1, the most recent Hoek–Brown guidelines provide descriptions only for boundary conditions related to slopes and tunnels. In slope excavations, the degree of disturbance is governed not only by the excavation method but also by the thickness of the removed overburden, with its influence becoming particularly significant in deep excavations. In recent years, the concept of a transitional disturbance factor, varying with depth from the excavation surface, has gained increasing attention. To address this need, the EXCASS system, an empirical method for selecting appropriate excavation techniques based on the Geological Strength Index (GSI) and point load strength (Is50) values, was integrated into the transitional disturbance factor framework in this study. EXCASS allows for the selection of stronger or weaker excavation methods, offering flexibility to control the degree of disturbance induced in the rock mass. Moreover, the disturbance factor at the excavation surface was determined by incorporating both the operational excavation power index and the thickness of the removed overburden. This integrated approach enables a more realistic evaluation of excavation-induced damage in slope stability analyses.
- Open Access
- 28 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 164
Impact of Rock Mass Strength Anisotropy with Depth on Slope Stability Under Excavation Disturbance
In open-pit excavations, overburden rock mass is disturbed by processes like blasting and mechanical excavation, leading to a reduction in mechanical properties. Accounting for this disturbance is essential for ensuring slope stability, optimizing costs, and maintaining feasibility. The Hoek–Brown failure criterion, a widely used empirical method in rock mechanics, incorporates the disturbance factor to reflect the reduction in rock mass strength after disturbance. This study reviews five approaches from the literature regarding the role of disturbance in rock mechanics, focusing on its impact on the factor of safety and the volume of rock mass above the potential failure surface. Additionally, an “S” shaped decay formulation was proposed as an alternative to existing equations. A key consideration is the transitional disturbance effect, which reflects the gradual change from a fully disturbed rock mass near the excavation surface to an undisturbed rock mass with increasing depth. Among the examined approaches, the “S” shaped decay equation, informed by insights from previous studies, appears to be the most realistic. One approach assumes the disturbance factor is highest at the surface due to the removal of blasted rock, leading to a fully disturbed rock mass in front of the excavation face. The disturbance then decreases with depth, transitioning to an undisturbed condition depending on the excavation method. Even when the rock mass is homogeneous and isotropic in joint properties, excavation induces anisotropy in mass strength, causing overall strength to increase with depth. This study also investigates the effect of anisotropic strength behavior resulting from the disturbance factor. For incorporating transitional disturbance in the design stage, both circular and combined failure mechanisms should be considered for a comprehensive understanding of slope stability.
- 28 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 15 (1) , 164
Open AccessImpact of Rock Mass Strength Anisotropy with Depth on Slope Stability Under Excavation Disturbance
In open-pit excavations, overburden rock mass is disturbed by processes like blasting and mechanical excavation, leading to a reduction in mechanical properties. Accounting for this disturbance is essential for ensuring slope stability, optimizing costs, and maintaining feasibility. The Hoek–Brown failure criterion, a widely used empirical method in rock mechanics, incorporates the disturbance factor to reflect the reduction in rock mass strength after disturbance. This study reviews five approaches from the literature regarding the role of disturbance in rock mechanics, focusing on its impact on the factor of safety and the volume of rock mass above the potential failure surface. Additionally, an “S” shaped decay formulation was proposed as an alternative to existing equations. A key consideration is the transitional disturbance effect, which reflects the gradual change from a fully disturbed rock mass near the excavation surface to an undisturbed rock mass with increasing depth. Among the examined approaches, the “S” shaped decay equation, informed by insights from previous studies, appears to be the most realistic. One approach assumes the disturbance factor is highest at the surface due to the removal of blasted rock, leading to a fully disturbed rock mass in front of the excavation face. The disturbance then decreases with depth, transitioning to an undisturbed condition depending on the excavation method. Even when the rock mass is homogeneous and isotropic in joint properties, excavation induces anisotropy in mass strength, causing overall strength to increase with depth. This study also investigates the effect of anisotropic strength behavior resulting from the disturbance factor. For incorporating transitional disturbance in the design stage, both circular and combined failure mechanisms should be considered for a comprehensive understanding of slope stability.
- Open Access
- 5 August 2024
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (1) , 154-167
A complementary approach to quantify the basic GSI chart considering scale effect on rock structure
- 5 August 2024
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (1) , 154-167
Open AccessA complementary approach to quantify the basic GSI chart considering scale effect on rock structure
- Open Access
- 1 April 2022
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 14 (2) , 329-345
A novel approach to structural anisotropy classification for jointed rock masses using theoretical rock quality designation formulation adjusted to joint spacing
- 1 April 2022
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 14 (2) , 329-345
Open AccessA novel approach to structural anisotropy classification for jointed rock masses using theoretical rock quality designation formulation adjusted to joint spacing
- 29 June 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (13) , 1-21
Comparison of the efficiency evaluations of selected excavatability classifications for rock masses
- 29 June 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (13) , 1-21
Comparison of the efficiency evaluations of selected excavatability classifications for rock masses
- 19 June 2020
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 79 (10) , 5355-5369
A flexible system for selection of rock mass excavation method
- 19 June 2020
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 79 (10) , 5355-5369
A flexible system for selection of rock mass excavation method
- 19 June 2020
- Published by Jeoloji Muhendisligi Dergisi in Jeoloji Mühendisliği Dergisi
- Vol. 44 (1) , 19-38
İki Farklı Örneklem Tekniği Kullanılarak Oluşturulan Heyelan Duyarlılık Haritalarının Frekans Oranı (FO) Yöntemi ile Karşılaştırılması
Heyelanların verdiği zararların azaltılması amacıyla heyelan oluşumunun önceden tahmini ve heyelana duyarlı alanların literatürde mevcut yöntemlerle belirlenmesi son derece önemlidir. Bu doğrultuda, heyelanların aynı litolojide geliştiği Bartın ilinin Ulus ilçesinin heyelan duyarlılık haritalamasının yapılması amaçlanmıştır. Çalışmanın önemli noktası, Chebyshev teoreminin bu çalışmada seçilen çalışma alanı için sınanması ve bu yöntemle üretilen duyarlılık haritasının mevcut literatürde sıklıkla kullanılan tüm heyelan kütlesi içerisindeki piksel sayma tekniği ile oluşturulan veri seti kullanılarak üretilen heyelan duyarlılık haritası ile karşılaştırılmasıdır. Çalışma alanında toplam 195 adet heyelan haritalanmış ve heyelanlı ve heyelanlı olmayan alanların belirlenmesinde Chebyshev teoremi ve tüm heyelan kütlesi içerisindeki piksel sayma tekniği olmak üzere iki farklı örneklem tekniği kullanılmıştır. Heyelan duyarlılık analizlerinde kullanılmak üzere topoğrafik yükselik, eğim, bakı, eğrisellik ve NDVI (normalize edilmiş fark bitki örtüsü indeksi) olmak üzere toplam 5 adet parametre haritası üretilmiştir. Her iki örneklem tekniği kullanılarak yapılan duyarlılık analizlerinde literatürde sıklıkla kullanılan Frekans Oranı (FO) yöntemi kullanılmış ve iki farklı harita üretilmiştir. Duyarlılık haritalarının performansı ise Eğri Altında Kalan Alan yöntemine (ROCEAA) göre değerlendirilmiş ve EAA değerleri sırasıyla Chebyshev teoremi için 0.78 ve tüm heyelan kütlesindeki piksel sayılarına göre yapılan örneklem tekniği için ise 0.72 olarak belirlenmiştir. Bu değerlere göre, üretilen her iki duyarlılık haritasının da kabul edilebilir düzeyde olduğu ve Chebyshev teoremi ile örneklem yapılarak üretilen duyarlılık haritasının performansının, diğer örneklem yöntemine göre nispeten daha yüksek çıktığı görülmüştür. Elde edilen bu sonuç, çalışmada kullanılan Chebyshev yönteminin de heyelan duyarlılık haritalama çalışmalarında etkin olarak kullanılabilir alternatif bir yöntem olduğunu ve bu yöntemle üretilen duyarlılık haritasının da başarılı bir kestirime sahip olduğunu göstermiştir.
- 19 June 2020
- Published by Jeoloji Muhendisligi Dergisi in Jeoloji Mühendisliği Dergisi
- Vol. 44 (1) , 19-38
İki Farklı Örneklem Tekniği Kullanılarak Oluşturulan Heyelan Duyarlılık Haritalarının Frekans Oranı (FO) Yöntemi ile Karşılaştırılması
Heyelanların verdiği zararların azaltılması amacıyla heyelan oluşumunun önceden tahmini ve heyelana duyarlı alanların literatürde mevcut yöntemlerle belirlenmesi son derece önemlidir. Bu doğrultuda, heyelanların aynı litolojide geliştiği Bartın ilinin Ulus ilçesinin heyelan duyarlılık haritalamasının yapılması amaçlanmıştır. Çalışmanın önemli noktası, Chebyshev teoreminin bu çalışmada seçilen çalışma alanı için sınanması ve bu yöntemle üretilen duyarlılık haritasının mevcut literatürde sıklıkla kullanılan tüm heyelan kütlesi içerisindeki piksel sayma tekniği ile oluşturulan veri seti kullanılarak üretilen heyelan duyarlılık haritası ile karşılaştırılmasıdır. Çalışma alanında toplam 195 adet heyelan haritalanmış ve heyelanlı ve heyelanlı olmayan alanların belirlenmesinde Chebyshev teoremi ve tüm heyelan kütlesi içerisindeki piksel sayma tekniği olmak üzere iki farklı örneklem tekniği kullanılmıştır. Heyelan duyarlılık analizlerinde kullanılmak üzere topoğrafik yükselik, eğim, bakı, eğrisellik ve NDVI (normalize edilmiş fark bitki örtüsü indeksi) olmak üzere toplam 5 adet parametre haritası üretilmiştir. Her iki örneklem tekniği kullanılarak yapılan duyarlılık analizlerinde literatürde sıklıkla kullanılan Frekans Oranı (FO) yöntemi kullanılmış ve iki farklı harita üretilmiştir. Duyarlılık haritalarının performansı ise Eğri Altında Kalan Alan yöntemine (ROCEAA) göre değerlendirilmiş ve EAA değerleri sırasıyla Chebyshev teoremi için 0.78 ve tüm heyelan kütlesindeki piksel sayılarına göre yapılan örneklem tekniği için ise 0.72 olarak belirlenmiştir. Bu değerlere göre, üretilen her iki duyarlılık haritasının da kabul edilebilir düzeyde olduğu ve Chebyshev teoremi ile örneklem yapılarak üretilen duyarlılık haritasının performansının, diğer örneklem yöntemine göre nispeten daha yüksek çıktığı görülmüştür. Elde edilen bu sonuç, çalışmada kullanılan Chebyshev yönteminin de heyelan duyarlılık haritalama çalışmalarında etkin olarak kullanılabilir alternatif bir yöntem olduğunu ve bu yöntemle üretilen duyarlılık haritasının da başarılı bir kestirime sahip olduğunu göstermiştir.
- 25 October 2016
- Published by Springer Nature in Journal of Mountain Science
- Vol. 13 (11) , 1923-1940
Application of Chebyshev theorem to data preparation in landslide susceptibility mapping studies: an example from Yenice (Karabük, Turkey) region
- 25 October 2016
- Published by Springer Nature in Journal of Mountain Science
- Vol. 13 (11) , 1923-1940
Application of Chebyshev theorem to data preparation in landslide susceptibility mapping studies: an example from Yenice (Karabük, Turkey) region