Sadık Özdemir
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sadık Özdemir has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Zafer Ortatepe
Pamukkale Universitesi
3 shared publications - Ayşe Nuray Canat
Istanbul Sabahattin Zaim Üniversitesi
1 shared publication - Emin Taner Elmas
Iğdır Üniversitesi
1 shared publication - Emre Arabaci
Pamukkale Universitesi
1 shared publication - Enes Fatih Pehlivan
Ordu Üniversitesi, Fatsa Deniz Bilimleri Fakültesi
1 shared publication - Gözde Çetin
Buharkent Vocational School, Department of Material and Material Processing Technologies, Aydın Adnan Menderes University, Buharkent, Aydın, Türkiye
1 shared publication
Latest Publications
- 30 September 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 14 (3) , 1313-1326
Three-Level Boost Converter-Based Single-Phase Five-Level T-Type Inverter
This study proposes a cascaded power conversion structure composed of a three-level DC-DC boost converter and a single-phase five-level T-type inverter to address the high performance and power quality demands of renewable energy systems. The integrated topology is designed to overcome the limitations of conventional two-level architectures by combining high voltage gain with reduced voltage stress on power switches and minimized total harmonic distortion (THD). The paper presents a comprehensive mathematical model and a robust control strategy, utilizing decoupled loops for total DC-link voltage regulation and neutral-point balancing, alongside a synchronous reference frame current controller for the inverter stage. Simulation studies conducted in the MATLAB/Simulink environment validate the operational characteristics of the proposed system. The results demonstrate that the boost stage maintains a stable symmetric DC link voltage of 350𝑉𝑑𝑐 (∓175𝑉𝑑𝑐). Furthermore, the T-type inverter generates a five-level output waveform with a THD as low as 1.22% under steady-state conditions and 1.01% under dynamic loading, compliant with IEEE 519 standards. This confirms the system capability to reduce voltage stress on switches by 50% while ensuring high-quality power delivery.
- 30 September 2026
- Published by Gazi Universitesi Fen Bilimleri Dergisi Part C: Tasarim ve Teknoloji in Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
- Vol. 14 (3) , 1313-1326
Three-Level Boost Converter-Based Single-Phase Five-Level T-Type Inverter
This study proposes a cascaded power conversion structure composed of a three-level DC-DC boost converter and a single-phase five-level T-type inverter to address the high performance and power quality demands of renewable energy systems. The integrated topology is designed to overcome the limitations of conventional two-level architectures by combining high voltage gain with reduced voltage stress on power switches and minimized total harmonic distortion (THD). The paper presents a comprehensive mathematical model and a robust control strategy, utilizing decoupled loops for total DC-link voltage regulation and neutral-point balancing, alongside a synchronous reference frame current controller for the inverter stage. Simulation studies conducted in the MATLAB/Simulink environment validate the operational characteristics of the proposed system. The results demonstrate that the boost stage maintains a stable symmetric DC link voltage of 350𝑉𝑑𝑐 (∓175𝑉𝑑𝑐). Furthermore, the T-type inverter generates a five-level output waveform with a THD as low as 1.22% under steady-state conditions and 1.01% under dynamic loading, compliant with IEEE 519 standards. This confirms the system capability to reduce voltage stress on switches by 50% while ensuring high-quality power delivery.
- 26 June 2026
- Published by Vizetek Publishing Company
Modern Mühendislik Yaklaşımları Modern Approaches in Engineering
MÜHENDİSLİĞİN GELECEĞİNE ÇOK DİSİPLİNLİ BİR BAKIŞ Günümüz dünyasında mühendislik; yalnızca makineler, yapılar ve sistemler tasarlamak değil, aynı zamanda doğanın kurallarını anlayarak insanlığın en karmaşık sorunlarına sürdürülebilir çözümler üretmek demektir. Modern Approaches in Engineering / Modern Mühendislik Yaklaşımları, sanayiden sağlığa, nanoteknolojiden yapay zekâya kadar mühendisliğin dönüştürücü gücünü gözler önüne seren eşsiz bir bilimsel derlemedir. Türk ve yabancı literatüre katkı sağlayan bu çift dilli eser, araştırmacıları ve endüstri profesyonellerini geleceğin teknolojileriyle buluşturuyor. Kitapta Öne Çıkan Temalar: • Malzeme ve İmalat Teknolojileri: Polimer eklemeli imalatın termodinamiği, plastik dişli aşınma analizleri ve nano düzeyde (CNT/Epoksi) kompozit davranışları. • Enerji ve Kontrol Sistemleri: Asenkron motorlarda model tabanlı hız kontrolü ve deniz dizel motorlarında kompozit uygulamaları. • Sürdürülebilirlik ve Çevre: Hidrojeller ile su arıtımı ve yapay zekânın küresel sürdürülebilir kalkınma hedeflerindeki rolü. • Tıp ve Biyomühendislikte Devrimsel Yaklaşımlar: Termodinamiğin yeni teorileri ve yapay zekâ destekli biyo-robotik sistemlerle pankreas kanseri tanısı ve tedavisi.
- 26 June 2026
- Published by Vizetek Publishing Company
Modern Mühendislik Yaklaşımları Modern Approaches in Engineering
MÜHENDİSLİĞİN GELECEĞİNE ÇOK DİSİPLİNLİ BİR BAKIŞ Günümüz dünyasında mühendislik; yalnızca makineler, yapılar ve sistemler tasarlamak değil, aynı zamanda doğanın kurallarını anlayarak insanlığın en karmaşık sorunlarına sürdürülebilir çözümler üretmek demektir. Modern Approaches in Engineering / Modern Mühendislik Yaklaşımları, sanayiden sağlığa, nanoteknolojiden yapay zekâya kadar mühendisliğin dönüştürücü gücünü gözler önüne seren eşsiz bir bilimsel derlemedir. Türk ve yabancı literatüre katkı sağlayan bu çift dilli eser, araştırmacıları ve endüstri profesyonellerini geleceğin teknolojileriyle buluşturuyor. Kitapta Öne Çıkan Temalar: • Malzeme ve İmalat Teknolojileri: Polimer eklemeli imalatın termodinamiği, plastik dişli aşınma analizleri ve nano düzeyde (CNT/Epoksi) kompozit davranışları. • Enerji ve Kontrol Sistemleri: Asenkron motorlarda model tabanlı hız kontrolü ve deniz dizel motorlarında kompozit uygulamaları. • Sürdürülebilirlik ve Çevre: Hidrojeller ile su arıtımı ve yapay zekânın küresel sürdürülebilir kalkınma hedeflerindeki rolü. • Tıp ve Biyomühendislikte Devrimsel Yaklaşımlar: Termodinamiğin yeni teorileri ve yapay zekâ destekli biyo-robotik sistemlerle pankreas kanseri tanısı ve tedavisi.
- Open Access
- 30 September 2024
- Published by Gazi University in Gazi University Journal of Science Part A: Engineering and Innovation
- Vol. 11 (3) , 563-576
Super Twisting Sliding Mode Control of Four-Phase Interleaved Boost Converter
This paper presents a novel control method that integrates super-twisting sliding mode (STSM) voltage control with proportional-integral (PI) current control for a four-phase interleaved boost converter (IBC) in fuel cell applications. The STSM control, employed in the outer voltage loop, provides robust voltage regulation by generating precise reference currents for each phase. The conventional PI control in the inner current loop utilizes these reference currents to generate pulse width modulation (PWM) signals for each phase. The effectiveness of the proposed control strategy is evaluated through comprehensive simulation studies in MATLAB/Simulink, demonstrating an improvement in dynamic performance and enhanced robustness compared to conventional methods. Quantitative analysis shows that the output voltage quickly rises to the reference voltage within approximately 0.25 seconds in the proposed STSM-PI control method and improves transient response by 16 times compared to the conventional PI-PI method. This integrated STSM-PI control strategy offers significant advancements in reliability and efficiency making it a promising solution for high-performance fuel cell power systems.
- 30 September 2024
- Published by Gazi University in Gazi University Journal of Science Part A: Engineering and Innovation
- Vol. 11 (3) , 563-576
Open AccessSuper Twisting Sliding Mode Control of Four-Phase Interleaved Boost Converter
This paper presents a novel control method that integrates super-twisting sliding mode (STSM) voltage control with proportional-integral (PI) current control for a four-phase interleaved boost converter (IBC) in fuel cell applications. The STSM control, employed in the outer voltage loop, provides robust voltage regulation by generating precise reference currents for each phase. The conventional PI control in the inner current loop utilizes these reference currents to generate pulse width modulation (PWM) signals for each phase. The effectiveness of the proposed control strategy is evaluated through comprehensive simulation studies in MATLAB/Simulink, demonstrating an improvement in dynamic performance and enhanced robustness compared to conventional methods. Quantitative analysis shows that the output voltage quickly rises to the reference voltage within approximately 0.25 seconds in the proposed STSM-PI control method and improves transient response by 16 times compared to the conventional PI-PI method. This integrated STSM-PI control strategy offers significant advancements in reliability and efficiency making it a promising solution for high-performance fuel cell power systems.
- Open Access
- 27 June 2023
- Published by Gazi University in Gazi University Journal of Science Part A: Engineering and Innovation
- Vol. 10 (2) , 206-221
A Control Scheme for a Quasi-Z Source Three-Phase Inverter
This paper presents a novel control scheme for a three-phase quasi-z source inverter (qZSI) using a capacitor voltage and input current-based sinusoidal pulse width modulation (SPWM) technique. The proposed scheme combines the advantages of both qZSI and SPWM techniques to achieve improved performance. The SPWM technique utilizes a sinusoidal modulation signal, which is compared with a high-frequency triangular carrier wave and two shoot-through (ST) references to determine the switching states for the three-phase qZSI. The positive and negative ST references are obtained from the capacitor voltages and input current, allowing for control of the DC bus voltage and ST states of the inverter. Additionally, the proposed control scheme generates the three-phase modulation signal through decoupling control in the dq reference frame. The detailed analysis of the control scheme includes its operating principle, transient state, steady-state responses, and the effects of parameter variations. Simulation studies are conducted using MATLAB/Simulink to assess the performance of the three-phase qZSI under the proposed control scheme. The simulation results demonstrate the effectiveness of the control scheme in terms of output voltage quality, DC bus voltage control, and robustness against reference variations. Overall, the proposed capacitor voltage and input current-based SPWM control scheme for the three-phase qZSI shows promising performance improvements and robustness, as confirmed through comprehensive simulation studies.
- 27 June 2023
- Published by Gazi University in Gazi University Journal of Science Part A: Engineering and Innovation
- Vol. 10 (2) , 206-221
Open AccessA Control Scheme for a Quasi-Z Source Three-Phase Inverter
This paper presents a novel control scheme for a three-phase quasi-z source inverter (qZSI) using a capacitor voltage and input current-based sinusoidal pulse width modulation (SPWM) technique. The proposed scheme combines the advantages of both qZSI and SPWM techniques to achieve improved performance. The SPWM technique utilizes a sinusoidal modulation signal, which is compared with a high-frequency triangular carrier wave and two shoot-through (ST) references to determine the switching states for the three-phase qZSI. The positive and negative ST references are obtained from the capacitor voltages and input current, allowing for control of the DC bus voltage and ST states of the inverter. Additionally, the proposed control scheme generates the three-phase modulation signal through decoupling control in the dq reference frame. The detailed analysis of the control scheme includes its operating principle, transient state, steady-state responses, and the effects of parameter variations. Simulation studies are conducted using MATLAB/Simulink to assess the performance of the three-phase qZSI under the proposed control scheme. The simulation results demonstrate the effectiveness of the control scheme in terms of output voltage quality, DC bus voltage control, and robustness against reference variations. Overall, the proposed capacitor voltage and input current-based SPWM control scheme for the three-phase qZSI shows promising performance improvements and robustness, as confirmed through comprehensive simulation studies.
- 29 June 2020
- Published by Springer Nature in Electrical Engineering
- Vol. 102 (4) , 2465-2479
A new stator voltage error-based MRAS model for field-oriented controlled induction motor speed estimation without using voltage transducers
- 29 June 2020
- Published by Springer Nature in Electrical Engineering
- Vol. 102 (4) , 2465-2479
A new stator voltage error-based MRAS model for field-oriented controlled induction motor speed estimation without using voltage transducers