Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kyle Dunno has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of crosslinking followed by thermoplastic processing via extrusion on starch properties for sustainable packaging and coating applications

    by Ayyuce Guzide Teke, Kyle Dunno, Sneh Punia Bangar

    Crosslinking is widely used to improve starch functionality and strengthening by introducing intra- and inter-molecular bonds at random sites. This modification creates a 3D network at random sites...

  • Open Access

    A novel non-iron-based starch, lignin, and halloysite-based oxygen scavenging composite for food packaging applications

    by Tanvi Rahate, Bala Veera Srinivas Aguru, Kyle Dunno, Sneh Punia Bangar

    Active packaging technologies are essential for maintaining food quality by reducing oxidative degradation.

  • Sustainable Biomaterials for Food Packaging

    by Sneh Punia Bangar, Kyle D. Dunno, William Scott Whiteside

    Considering the great demand for environmentally friendly packaging systems, researchers are developing solutions that consider the sustainability and economic feasibility of the process. Sustainable Biomaterials for Food Packaging evaluates the role of emerging biomaterials for food packaging systems and discusses in detail the various engineering aspects associated with packaging. The book also covers the environmental aspects, social perception, and acceptance of biomaterials packaging. It covers the sustainable packaging systems available for the preservation of all types of foods and products derived from meat, milk, fruits/vegetables, and baked goods. The book is suited for academicians, scientists, students, and food industry professionals; it will also satisfy the needs of researchers, scholars, and students at both the postgraduate and undergraduate levels.

  • Composite Analysis of Field Horizontal Long‐Duration Impacts for Truck and Trailer

    by Changfeng Ge, Kyle Dunno, David Leinberger, Patrick McDavid

    Long‐duration vehicle impact events are experienced during turning, braking, acceleration and deceleration. These events make unitized packaging susceptible to slip or tilt when the location of their centre of gravity changes. The large amount of field‐collected long‐duration data requires processing and composite analysis to develop a representative profile in order to replicate the long‐duration impact in the laboratory simulation. Based on the prior field data of long‐duration impact, this study introduces composite analysis for the collected data emphasizing on the maximum acceleration and the maximum equivalent velocity change. The shock response spectrum (SRS) of these maximum impact events is also studied for identifying the possible amplification frequency. The field data generated composite profiles in the lateral and longitudinal directions were compared with EUMOS's lateral/rearward and deceleration orientations, respectively.


  • Measuring and Assessing Long‐Duration Impacts for Truck and Trailer

    by Changfeng Ge, David Leinberger, Kyle Dunno

    A vehicle's long‐duration impacts events are experienced during turning, braking, and accelerating and decelerating. These long‐duration events are mixed with random impacts and shocks from various patterns and magnitudes. This study reports a comprehensive measurement and assessment of horizontal long‐duration impact dynamics for less‐than‐truckload (LTL) transportation. The collected horizontal impacts were synchronized with GPS data, allowing for the geographical location and identification of the event's signatures. All critical horizontal long‐duration impacts were detected by a MATLAB‐based algorithm and clustered into designated groups. A maximum collected environment and statistical analysis were assessed for the collected data, including the range, mean and cumulative probabilities. The study revealed that horizontal impacts caused by left‐turning and longitudinal braking are likely the most critical horizontal impacts. Additionally, lateral and longitudinal linear jerks were obtained for comparison with the EUMOS standard.


  • Vibration Test Spectrum Simulating the In-Flight Jet Aircraft Transport Environment of Parcel and Unit Load Shipments

    by Kyle Dunno, Eric Joneson, Patrick McDavid, Tagore Somers, Michael Willard

    The measurement and analysis of the hazards occurring during the distribution environment are critical to developing test simulations that can be used to challenge packaged products and quantify their performance. One increasingly utilized vehicle is jet aircraft to move packaged product systems through the distribution network. As a result, there is a need to ensure that the vibration test levels used to qualify packaged product systems reflect the hazard levels observed in the air transport environment. This study utilized a field data recorder that separated ground and in-flight vibration events to capture a series of jet aircraft flights. The measured acceleration-time data were analyzed in terms of power spectral density (PSD) and statistically examined to understand the variability of the vibration intensity of this transport mode. The PSD profiles computed from the field measured events were significantly lower in vibration intensity than current test methods for air transport. Statistical analysis showed that the measured events were non-Gaussian and right-skewed. Additionally, a composite jet aircraft PSD test profile, reflective of the field-collected events, was developed, which could drive vibration test systems to evaluate packaged product systems during the in-flight segment of this distribution channel.


  • Open Access

    Measurement and Analysis of Crowdsourced Vehicle Vibration Levels during Last Mile Delivery Segments for Parcel Shipments

    by Kyle Dunno, Purushottam Chavan

    Crowdsourced logistics has emerged as a delivery channel for many single-parcel packages. As a result, this logistics network has introduced personal passenger vehicles as a means to transport parcels during last mile delivery segments. To understand this network’s vibration levels and cargo capacity restraints, four vehicle types (a sedan, sports sedan, compact SUV and full-size SUV) commonly used in crowdsourced logistics deliveries were selected for measurement and analysis. This study shows that the vibration levels were significantly higher in the vertical axis and that the overall vibration energy increased as vehicle speed increased, except in the sedan. The sedan and SUV vehicles showed power spectral density peak frequencies in the low-frequency range, occurring at approximately 2 Hz, matching previous studies using similar vehicles. The vibration levels were greatest in the sports sedan and lowest in the sedan. The recorded vibration events showed a right-skewed heavy-tailed distribution and were non-Gaussian.


  • Open Access

    Measurement and analysis of low‐acceleration and long‐duration longitudinal events using delivery van

    by Péter Böröcz, Csaba Pánczél, Kyle Dunno, S. Paul Singh

    This study investigates longitudinal acceleration events during freight transportation characterized as low‐acceleration and long‐duration using delivery van type vehicles. In the past several decades, there has been an increase in shipments requiring only single or small pallet load quantities and mixed palletized unit loads comprised of different goods. These loads are often transported in delivery vans without load securing devices, increasing the risk of product loss and damage due to load failures resulting from unit loads shifting. A field data acquisition system was used to observe and record the random acceleration events from five vehicles for 5 days, explicitly targeting the vehicles' braking and acceleration manoeuvres. The study aimed to understand the physical phenomenon and provide new information that can be used during preshipment tests to prevent damage to goods and ensure unit load integrity is maintained throughout the supply chain. The events were statistically analysed to understand their probability of occurrence, severity level, and quantify critical parameters such as event rise and hold times. For the braking manoeuvre, the statistical mean of average deceleration was 0.25 g with a corresponding rise and hold duration of 0.83 and 1.27 s, respectively. During the vehicle's acceleration manoeuvre, the statistical mean of average acceleration was 0.29 g with a rise and hold time of 1.29 and 1.39 s, respectively. Utilizing the field data, composite profiles were developed, and these profiles were compared to the currently available test procedures and previous results of other studies.


  • Field assessment of horizontal accelerations using air ride suspension trailers

    by Kyle Dunno, Changfeng Ge

    Current laboratory tests designed to evaluate package and unit load systems focus strictly on the intensity of vertical orientation. However, due to an increased demand for source reduction and the light‐weighting of packaging components, unit loads are becoming more susceptible to the horizontal forces encountered during transport. Understanding the field measured acceleration levels is critical to developing accurate laboratory test simulations to examine unit load rigidity. This paper uses horizontal acceleration data collected from two air ride suspension trailers to quantify the rise times and steady‐state accelerations levels experienced by the vehicles in the longitudinal (braking) and lateral directions. These characteristics are essential in establishing test methods that accurately reflect field measured events. The results show that the rise times experienced by larger transport trailers are longer than previous reports using smaller trailers. The larger transport vehicles from the present study showed lower decelerations and accelerations in braking and lateral moving events, respectively, compared to smaller transport vehicles. Regardless of travel direction, the deceleration and acceleration levels are right‐skewed, with most of the events falling below 0.33 g.


  • Open Access

    Susceptibility of Impact Damage to Whole Apples Packaged Inside Molded Fiber and Expanded Polystyrene Trays

    by Kyle Dunno, Isabel Stoeckley, Matthew Hofmeister

    Postharvest damage, leading to loss and waste, continues to be a significant problem in the fresh produce industry. Trays, designed to reduce fruit-to-fruit contact, are utilized by the apple industry to minimize bruising of whole apples. During distribution, packaged apples are subjected to various supply chain hazards, which may lead to bruising damage. Currently, molded fiber (MF) and expanded polystyrene (EPS) trays transport whole apples from the packhouse to the retail outlet. Mechanical shock, by free-fall drop method, was used to evaluate the performance differences between the two trays and quantify the bruising characteristics of the apples. Results showed that the EPS trays provided better shock protection to the apple as compared to the MF tray, reducing the impact acceleration by more than 70%. Additionally, the bruise susceptibility was 40% less for the apples packaged inside the EPS trays, regardless of drop height. However, apples packaged in the middle layer trays were most susceptible to bruising damage, regardless of tray type.