Elizabeta Gjorgievska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elizabeta Gjorgievska has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Nichola Jayne Coleman
School of Science, Faculty of Engineering and Science, University of Greenwich, Chatham Maritime, Kent ME4 4TB, UK
7 shared publications John W. Nicholson
Bluefield Centre for Biomaterials, London, UK
6 shared publications- Aleksandar Dimkov
Department of Pediatric and Preventive Dentistry, Faculty of Dentistry, Ss Cyril and Methodius University in Skopje, 1000 Skopje, North Macedonia
5 shared publications Ian J. Slipper
Faculty of Engineering and Science,University of Greenwich,Maritime, Gillingham, Chatham ME4 4TB, Central Ave, Gillingham, Chatham ME4,UK
5 shared publicationsDragana Gabric
School of Dental Medicine, University of Zagreb, Zagreb, Republic of Croatia
3 shared publications- Dragana Gabrić
Department of Oral Surgery, School of Dental Medicine, University of Zagreb, HR-10000 Zagreb, Croatia
3 shared publications
Latest Publications
- Open Access
Enamel Remineralizing Agents: State of the Art
Dental caries remains the most prevalent chronic disease worldwide, yet early enamel lesions are reversible if managed with appropriate remineralizing agents. This narrative review synthesizes current evidence on remineralizing agents, their mechanisms of action, and clinical applications, with a focus on dental materials used in preventive and minimally invasive dentistry. Traditional fluoride-based approaches enhance remineralization through fluorapatite formation; however, their effectiveness is limited when calcium and phosphate bioavailability is insufficient. Biomimetic agents, including casein phosphopeptide–amorphous calcium phosphate (CPP-ACP), bioactive glasses, tricalcium phosphate, and nano-hydroxyapatite, provide these bioavailable ions and demonstrate superior performance under challenging clinical conditions. Emerging therapies such as probiotics, photodynamic therapy, and laser-assisted mineralization show promise but require further clinical validation. Based on the primary mechanism of action, an original classification of remineralizing agents is proposed, grouping them into fluoride-based agents, calcium-phosphate systems, nanotechnology-based systems, biofilm modifiers, biomimetic and emerging systems, and adjunctive antimicrobial therapies. The review concludes that bioavailable calcium represents a critical limiting factor in remineralization under certain conditions, and that combination protocols incorporating multiple remineralizing agents, tailored to individual patient risk profiles, achieve superior outcomes compared to single-agent approaches. Clinicians are encouraged to adopt minimally invasive, patient-tailored remineralization strategies that arrest lesions before cavitation, preserving natural tooth structure and reducing the lifelong restorative burden.
Open AccessEnamel Remineralizing Agents: State of the Art
Dental caries remains the most prevalent chronic disease worldwide, yet early enamel lesions are reversible if managed with appropriate remineralizing agents. This narrative review synthesizes current evidence on remineralizing agents, their mechanisms of action, and clinical applications, with a focus on dental materials used in preventive and minimally invasive dentistry. Traditional fluoride-based approaches enhance remineralization through fluorapatite formation; however, their effectiveness is limited when calcium and phosphate bioavailability is insufficient. Biomimetic agents, including casein phosphopeptide–amorphous calcium phosphate (CPP-ACP), bioactive glasses, tricalcium phosphate, and nano-hydroxyapatite, provide these bioavailable ions and demonstrate superior performance under challenging clinical conditions. Emerging therapies such as probiotics, photodynamic therapy, and laser-assisted mineralization show promise but require further clinical validation. Based on the primary mechanism of action, an original classification of remineralizing agents is proposed, grouping them into fluoride-based agents, calcium-phosphate systems, nanotechnology-based systems, biofilm modifiers, biomimetic and emerging systems, and adjunctive antimicrobial therapies. The review concludes that bioavailable calcium represents a critical limiting factor in remineralization under certain conditions, and that combination protocols incorporating multiple remineralizing agents, tailored to individual patient risk profiles, achieve superior outcomes compared to single-agent approaches. Clinicians are encouraged to adopt minimally invasive, patient-tailored remineralization strategies that arrest lesions before cavitation, preserving natural tooth structure and reducing the lifelong restorative burden.
- 28 May 2026
- Published by Springer Nature in Bratislava Medical Journal
- Vol. 127 (7) , 1-8
Can Addition of Nanoparticles Improve the Properties of Glass-Ionomer Cements?
- 28 May 2026
- Published by Springer Nature in Bratislava Medical Journal
- Vol. 127 (7) , 1-8
Can Addition of Nanoparticles Improve the Properties of Glass-Ionomer Cements?
- Open Access
- 30 September 2025
- Published by Maad Rayan Publishing Company in Journal of Dental Research, Dental Clinics, Dental Prospects
- Vol. 19 (3) , 193-203
Impact of integrated quaternary ammonium compounds in conventional glass-ionomers on cariogenic oral microflora: An in vitro analysis
Background. In addition to the capacity for gradual and sustained fluoride release over extended durations, which is crucial for remineralization processes and antibacterial properties, glass-ionomer cements (GICs) may serve as templates for releasing additional active antimicrobial agents. This study aimed to evaluate and compare the antimicrobial activity of conventional GICs—ChemFlex and Fuji IX—with and without the addition of antimicrobial compounds benzalkonium chloride and cetylpyridinium chloride (CPC), against cariogenic bacteria Streptococcus mutans, Lactobacillus casei, and Actinomyces viscosus across different time intervals. Methods. Specimens measuring 4×6 mm were prepared from the cements with and without the incorporation of antibacterial agents. The inhibitory zones were assessed after 48 hours, as well as after 2, 7, and 21 days of incubation. The agar diffusion method was employed to determine the zones of inhibition. Results. The statistical analysis of the antimicrobial effects between the two compounds indicated no significant differences in the control group. Statistically significant differences were noted in the experimental group, except on the 21st day for S. mutans across all concentrations, and the 48th hour and 7th day for A. viscosus in 3% antimicrobial agents. Conclusion. The incorporation of antimicrobial agents into conventional glass-ionomers demonstrated an inhibitory effect on all examined cariogenic bacteria. This effect was more significant at higher concentrations. Over time, the suppressive effect diminished; however, it remained significantly strong. Glass-ionomers lacking antimicrobial agents demonstrated a restricted but noticeable antibacterial efficacy.
- 30 September 2025
- Published by Maad Rayan Publishing Company in Journal of Dental Research, Dental Clinics, Dental Prospects
- Vol. 19 (3) , 193-203
Open AccessImpact of integrated quaternary ammonium compounds in conventional glass-ionomers on cariogenic oral microflora: An in vitro analysis
Background. In addition to the capacity for gradual and sustained fluoride release over extended durations, which is crucial for remineralization processes and antibacterial properties, glass-ionomer cements (GICs) may serve as templates for releasing additional active antimicrobial agents. This study aimed to evaluate and compare the antimicrobial activity of conventional GICs—ChemFlex and Fuji IX—with and without the addition of antimicrobial compounds benzalkonium chloride and cetylpyridinium chloride (CPC), against cariogenic bacteria Streptococcus mutans, Lactobacillus casei, and Actinomyces viscosus across different time intervals. Methods. Specimens measuring 4×6 mm were prepared from the cements with and without the incorporation of antibacterial agents. The inhibitory zones were assessed after 48 hours, as well as after 2, 7, and 21 days of incubation. The agar diffusion method was employed to determine the zones of inhibition. Results. The statistical analysis of the antimicrobial effects between the two compounds indicated no significant differences in the control group. Statistically significant differences were noted in the experimental group, except on the 21st day for S. mutans across all concentrations, and the 48th hour and 7th day for A. viscosus in 3% antimicrobial agents. Conclusion. The incorporation of antimicrobial agents into conventional glass-ionomers demonstrated an inhibitory effect on all examined cariogenic bacteria. This effect was more significant at higher concentrations. Over time, the suppressive effect diminished; however, it remained significantly strong. Glass-ionomers lacking antimicrobial agents demonstrated a restricted but noticeable antibacterial efficacy.
- Open Access
Efficacy of Laser Pulpotomy vs. Conventional Vital Pulpotomy in Primary Teeth: A Comparative Clinical Analysis
Background/Objectives: Vital pulpotomy involves the partial removal of the coronal pulp tissue in cases of vital pulp exposure, aiming to maintain the health and function of the remaining radicular pulp. The first aim of this study was to compare the effects of two different methodological approaches towards vital pulpotomy of the primary teeth—conventional and laser pulpotomy; thereafter, the aim was to perform a comparison of the effects of the application of calcium hydroxide (Ca(OH)2) versus mineral trioxide aggregate (MTA); then, we analyzed and compared clinical and radiographic changes in pulpotomized teeth over a defined time period; finally, we determined the degree of efficiency of different methods of vital pulpotomy of the primary teeth. Methods: This study analyzed 40 primary molars, 20 teeth treated with conventional pulpotomy and 20 teeth submitted to laser pulpotomy. Additionally, two pulpotomy agents—Ca(OH)2 and MTA—were used. The following clinical parameters were examined: pain, percussion sensitivity, swelling, sinus tract presence and pathological mobility. Absence of apical radiolucency, external and internal root resorption, and periodontal ligament widening were key radiographic parameters of the success of the endodontic therapy. Results: The results showed that there was no statistically significant difference between the two pulpotomy agents—Ca(OH)2 and MTA—and therefore both can be used as alternative pulpotomy agents in the primary teeth. Conclusions: The success rate of pulpotomy with Ca(OH)2 is similar to that of pulpotomy with MTA. The combination of laser pulpotomy and the use of MTA gave the best results according to all clinical and radiographic criteria examined and in all analyzed periods.
Open AccessEfficacy of Laser Pulpotomy vs. Conventional Vital Pulpotomy in Primary Teeth: A Comparative Clinical Analysis
Background/Objectives: Vital pulpotomy involves the partial removal of the coronal pulp tissue in cases of vital pulp exposure, aiming to maintain the health and function of the remaining radicular pulp. The first aim of this study was to compare the effects of two different methodological approaches towards vital pulpotomy of the primary teeth—conventional and laser pulpotomy; thereafter, the aim was to perform a comparison of the effects of the application of calcium hydroxide (Ca(OH)2) versus mineral trioxide aggregate (MTA); then, we analyzed and compared clinical and radiographic changes in pulpotomized teeth over a defined time period; finally, we determined the degree of efficiency of different methods of vital pulpotomy of the primary teeth. Methods: This study analyzed 40 primary molars, 20 teeth treated with conventional pulpotomy and 20 teeth submitted to laser pulpotomy. Additionally, two pulpotomy agents—Ca(OH)2 and MTA—were used. The following clinical parameters were examined: pain, percussion sensitivity, swelling, sinus tract presence and pathological mobility. Absence of apical radiolucency, external and internal root resorption, and periodontal ligament widening were key radiographic parameters of the success of the endodontic therapy. Results: The results showed that there was no statistically significant difference between the two pulpotomy agents—Ca(OH)2 and MTA—and therefore both can be used as alternative pulpotomy agents in the primary teeth. Conclusions: The success rate of pulpotomy with Ca(OH)2 is similar to that of pulpotomy with MTA. The combination of laser pulpotomy and the use of MTA gave the best results according to all clinical and radiographic criteria examined and in all analyzed periods.
- Open Access
- 15 March 2024
- Published by University of Zagreb School of Dental Medicine in Acta Stomatologica Croatica
- Vol. 58 (1) , 18-29
Comparison of Three Different Orthodontic Adhesives Bonded to Metallic and Ceramic Brackets: SEM and SEM/EDX Analysis (In Vitro Study)
Objectives: To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets: ceramic brackets (Fascination Roth 0.22) and metallic brackets (Topic Roth 0.22, Dentaurum). Materials and methods: The study was performed on 18 human teeth (6 for each adhesive). The prepared teeth were divided into three groups according to the examination time. Subsequently, they were observed af- ter 1, 2 and 3 weeks following bonding. After the experimental procedure, the teeth samples were cut in half along the longitudinal axis in the vestibulo-oral direction, fixed with conductive carbon cement, placed in a high-vacuum evaporator and then coated with carbon. One half of each sample was observed under a Field-emission gun scanning electron microscope (FEG-SEM Hitachi SU 8030, Japan), while on the second half of the samples qualitative (X-ray line-scans) and semi-quantitative point X-ray energy dispersive analyses (EDX) were performed with Thermo Noran (USA) NSS System 7, equipped with Ultra Dry detector (30 mm2 window). Results: Transbond XT had an ideal bond with the enamel and the bracket base, with rare presence of microgaps and cracks in the enamel. Heliosit Orthodontic demonstrated a better bond relationship with the bracket base than the enamel, where- as in the latter the presence of microgaps in the bond was observed. The microphotographs of Fuji Ortho LC demonstrated many cracks inside the adhesive, and some of them continued to move for- ward into the enamel surface. Therefore, an impression of a very solid bond relationship with the enamel exists, with cracks being present in the enamel surface and never at the enamel-adhesive in- terface. Microgaps also appeared at the bracket-adhesive interface. Conclusion: Transbond XT is a highly filled composite resin and is an ideal orthodontic adhesive in each aspect examined, with an ideal enamel-adhesive and bracket-adhesive interface. Heliosit Orthodontic provides better bracketadhesive interface compared to the enamel. Fuji Ortho LC as a solid resin-modified GIC provides a better enamel-adhesive interface, compared to the bracket base.
- 15 March 2024
- Published by University of Zagreb School of Dental Medicine in Acta Stomatologica Croatica
- Vol. 58 (1) , 18-29
Open AccessComparison of Three Different Orthodontic Adhesives Bonded to Metallic and Ceramic Brackets: SEM and SEM/EDX Analysis (In Vitro Study)
Objectives: To compare three different orthodontic adhesives (Transbond XT Light Cure Adhesive, Heliosit Orthodontic, Fuji Ortho LC) bonded to two types of orthodontic brackets: ceramic brackets (Fascination Roth 0.22) and metallic brackets (Topic Roth 0.22, Dentaurum). Materials and methods: The study was performed on 18 human teeth (6 for each adhesive). The prepared teeth were divided into three groups according to the examination time. Subsequently, they were observed af- ter 1, 2 and 3 weeks following bonding. After the experimental procedure, the teeth samples were cut in half along the longitudinal axis in the vestibulo-oral direction, fixed with conductive carbon cement, placed in a high-vacuum evaporator and then coated with carbon. One half of each sample was observed under a Field-emission gun scanning electron microscope (FEG-SEM Hitachi SU 8030, Japan), while on the second half of the samples qualitative (X-ray line-scans) and semi-quantitative point X-ray energy dispersive analyses (EDX) were performed with Thermo Noran (USA) NSS System 7, equipped with Ultra Dry detector (30 mm2 window). Results: Transbond XT had an ideal bond with the enamel and the bracket base, with rare presence of microgaps and cracks in the enamel. Heliosit Orthodontic demonstrated a better bond relationship with the bracket base than the enamel, where- as in the latter the presence of microgaps in the bond was observed. The microphotographs of Fuji Ortho LC demonstrated many cracks inside the adhesive, and some of them continued to move for- ward into the enamel surface. Therefore, an impression of a very solid bond relationship with the enamel exists, with cracks being present in the enamel surface and never at the enamel-adhesive in- terface. Microgaps also appeared at the bracket-adhesive interface. Conclusion: Transbond XT is a highly filled composite resin and is an ideal orthodontic adhesive in each aspect examined, with an ideal enamel-adhesive and bracket-adhesive interface. Heliosit Orthodontic provides better bracketadhesive interface compared to the enamel. Fuji Ortho LC as a solid resin-modified GIC provides a better enamel-adhesive interface, compared to the bracket base.
- Open Access
- 13 December 2022
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 17 (03) , 902-909
Survival Rate of Atraumatic Restorative Treatment Restorations in Primary Posterior Teeth in Children with High Risk of Caries in the Republic of Kosovo—1-Year Follow-up
Objective Atraumatic restorative treatment (ART) may be beneficial for disadvantaged populations with no or limited access to dental services. This study aimed to evaluate the survival rate of single-surface ART restorations in primary posterior teeth in children with high caries risk. Materials and Methods This study was conducted in six rural areas of the Republic of Kosovo, and 100 children aged 3 to 8 years participated in the study. Information was obtained from each parent/guardian regarding their children, such as sociodemographic characteristics, general health, dental history, dietary habits, oral hygiene, and fluoride exposure. The reduced Cariogram was used to estimate the risk of caries in the participants based on the seven factors specified in the program, and all the provided information were collected and entered in a computer program of the Cariogram. A pediatric dentist, accompanied by two assistants, performed 100 ART restorations in school settings using high-viscosity glass-ionomer cement (Fuji IX) following the nine steps of the ART procedure. The restorations were evaluated at 3, 6, 9, and 12 months using the ART restoration criteria. Statistical Analysis Percentages, mean value, standard deviation, mean interquartile range, and difference test between arithmetic mean values were used to analyze the research results. Results Review of the average of reduced Cariogram showed that the majority of children, 72%, were at high risk of developing caries, with only 28% having a good chance of avoiding caries in the future. A total of 77% of the children in the study had never visited dentists before due to poor economic conditions and the lack of dentists in the area. The success rates of ART restorations performed in single-surface cavities in primary teeth were very encouraging, with more than 97% success rates after a 1-year follow-up period. Conclusion Our results demonstrate that ART is efficient, affordable, and practical for the treatment of single-surface cavities in primary posterior teeth. Owing to its low price and atraumatic nature, ART can potentially help disadvantaged children in Kosovo access dental care.
- 13 December 2022
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 17 (03) , 902-909
Open AccessSurvival Rate of Atraumatic Restorative Treatment Restorations in Primary Posterior Teeth in Children with High Risk of Caries in the Republic of Kosovo—1-Year Follow-up
Objective Atraumatic restorative treatment (ART) may be beneficial for disadvantaged populations with no or limited access to dental services. This study aimed to evaluate the survival rate of single-surface ART restorations in primary posterior teeth in children with high caries risk. Materials and Methods This study was conducted in six rural areas of the Republic of Kosovo, and 100 children aged 3 to 8 years participated in the study. Information was obtained from each parent/guardian regarding their children, such as sociodemographic characteristics, general health, dental history, dietary habits, oral hygiene, and fluoride exposure. The reduced Cariogram was used to estimate the risk of caries in the participants based on the seven factors specified in the program, and all the provided information were collected and entered in a computer program of the Cariogram. A pediatric dentist, accompanied by two assistants, performed 100 ART restorations in school settings using high-viscosity glass-ionomer cement (Fuji IX) following the nine steps of the ART procedure. The restorations were evaluated at 3, 6, 9, and 12 months using the ART restoration criteria. Statistical Analysis Percentages, mean value, standard deviation, mean interquartile range, and difference test between arithmetic mean values were used to analyze the research results. Results Review of the average of reduced Cariogram showed that the majority of children, 72%, were at high risk of developing caries, with only 28% having a good chance of avoiding caries in the future. A total of 77% of the children in the study had never visited dentists before due to poor economic conditions and the lack of dentists in the area. The success rates of ART restorations performed in single-surface cavities in primary teeth were very encouraging, with more than 97% success rates after a 1-year follow-up period. Conclusion Our results demonstrate that ART is efficient, affordable, and practical for the treatment of single-surface cavities in primary posterior teeth. Owing to its low price and atraumatic nature, ART can potentially help disadvantaged children in Kosovo access dental care.
- Open Access
Evaluation of Efficiency of Polymerization, Surface Roughness, Porosity and Adaptation of Flowable and Sculptable Bulk Fill Composite Resins
A new category of commercial bulk fill composite resins (CRs) enables the placement of 4-mm-thick layers as an alternative to the traditional time-consuming incremental technique. The purpose of the present study was to compare the efficiency of the polymerization, adaptation and porosity of two high-viscosity ‘sculptable’ bulk fill CRs (Filtek™ Bulk Fill (3M™ ESPE, St. Paul, MN, USA) and Tetric EvoCeram® Bulk Fill (Ivoclar Vivadent AG, Schwan, Liechtenstein)) and two low-viscosity ‘flowable’ bulk fill CRs (SureFil® SDR™ flow (Dentsply Sirona, Charlotte, NC, USA) and Tetric EvoFlow® Bulk Fill (Ivoclar Vivadent AG, Schaan, Liechtenstein)). Cylindrical samples of the bulk fill CRs (4 mm height × 10 mm diameter) were analyzed by Fourier-transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM). Additionally, occlusal cavities were prepared in twelve extracted human molars and restored with the bulk fill CRs (n = 3 for each CR). The adaptation and porosity of the bulk fill CRs were evaluated by X-ray microcomputed tomography (µCT) with a 3D morphometric analysis, and the adaptation was also analyzed by scanning electron microscopy (SEM) on longitudinal vestibulo-oral sections of the restored teeth. The AFM analysis demonstrated that the surface roughness of the SureFil® SDR™ flow was higher than that of the Tetric EvoFlow® Bulk Fill and that the surface roughness of Filtek™ Bulk Fill was higher than that of Tetric EvoCeram® Bulk Fill. µCT and SEM confirmed that the flowable bulk fill CRs had excellent adaptation to the cavity walls. The 3D morphometric analysis showed the highest and lowest degrees of porosity in Filtek™ Bulk Fill and Tetric EvoFlow® Bulk Fill, respectively. In general, the flowable bulk fill CRs exhibited better adaptation, a higher efficiency of polymerization and lower porosity than the sculptable materials.
Open AccessEvaluation of Efficiency of Polymerization, Surface Roughness, Porosity and Adaptation of Flowable and Sculptable Bulk Fill Composite Resins
A new category of commercial bulk fill composite resins (CRs) enables the placement of 4-mm-thick layers as an alternative to the traditional time-consuming incremental technique. The purpose of the present study was to compare the efficiency of the polymerization, adaptation and porosity of two high-viscosity ‘sculptable’ bulk fill CRs (Filtek™ Bulk Fill (3M™ ESPE, St. Paul, MN, USA) and Tetric EvoCeram® Bulk Fill (Ivoclar Vivadent AG, Schwan, Liechtenstein)) and two low-viscosity ‘flowable’ bulk fill CRs (SureFil® SDR™ flow (Dentsply Sirona, Charlotte, NC, USA) and Tetric EvoFlow® Bulk Fill (Ivoclar Vivadent AG, Schaan, Liechtenstein)). Cylindrical samples of the bulk fill CRs (4 mm height × 10 mm diameter) were analyzed by Fourier-transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM). Additionally, occlusal cavities were prepared in twelve extracted human molars and restored with the bulk fill CRs (n = 3 for each CR). The adaptation and porosity of the bulk fill CRs were evaluated by X-ray microcomputed tomography (µCT) with a 3D morphometric analysis, and the adaptation was also analyzed by scanning electron microscopy (SEM) on longitudinal vestibulo-oral sections of the restored teeth. The AFM analysis demonstrated that the surface roughness of the SureFil® SDR™ flow was higher than that of the Tetric EvoFlow® Bulk Fill and that the surface roughness of Filtek™ Bulk Fill was higher than that of Tetric EvoCeram® Bulk Fill. µCT and SEM confirmed that the flowable bulk fill CRs had excellent adaptation to the cavity walls. The 3D morphometric analysis showed the highest and lowest degrees of porosity in Filtek™ Bulk Fill and Tetric EvoFlow® Bulk Fill, respectively. In general, the flowable bulk fill CRs exhibited better adaptation, a higher efficiency of polymerization and lower porosity than the sculptable materials.
- Open Access
- 1 May 2019
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 13 (02) , 243-247
Effects of Addition of Quaternary Ammonium Antimicrobial Compounds into Root Canal Sealers
Objective The aim of this study is to determine the effect of the addition of benzalkonium chloride and cetylpyridinium chloride in three commercial root canal sealers. Materials and Methods Three different root canal sealers were used: EndoRez, N2, and Apexit Plus. The samples were prepared by mixing the components according to the manufacturers’ guidelines and adding 2% in weight of the antimicrobials to the newly mixed cement. The paste was placed in molds and stored in an incubator (37°C, 24 h). The samples were then stored in 5-mL distilled water. Samples without antimicrobials served as a control. All samples were tested at 3 time intervals: 1 day, 1 week, and 1 month following their storage in distilled water. The impact of the antimicrobials on the solubility of the sealers, the release of chloride ions (Cl—), and the pH value were examined. Statistical Analysis Used Analysis was done using one-way analysis of variance and the post hoc Tukey's honestly significant difference test. Results Chloride ions are present in storage media with EndoRez, N2, and Apexit Plus samples (without antimicrobials) following all tested storage intervals. The addition of the antimicrobials increased the release of chloride ions. Endodontic cements without addition of antimicrobials show an increase in weight after 1 month. The highest pH value is measured in Apexit Plus samples. The solutions in which N2 samples (with and without addition of antimicrobials) were stored did not have a significant change in their pH, while in the EndoRez solutions, a significant decrease in the pH value after the first week was measured. Conclusions The addition of antimicrobials might lead to improved characteristics of the root canal sealers.
- 1 May 2019
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 13 (02) , 243-247
Open AccessEffects of Addition of Quaternary Ammonium Antimicrobial Compounds into Root Canal Sealers
Objective The aim of this study is to determine the effect of the addition of benzalkonium chloride and cetylpyridinium chloride in three commercial root canal sealers. Materials and Methods Three different root canal sealers were used: EndoRez, N2, and Apexit Plus. The samples were prepared by mixing the components according to the manufacturers’ guidelines and adding 2% in weight of the antimicrobials to the newly mixed cement. The paste was placed in molds and stored in an incubator (37°C, 24 h). The samples were then stored in 5-mL distilled water. Samples without antimicrobials served as a control. All samples were tested at 3 time intervals: 1 day, 1 week, and 1 month following their storage in distilled water. The impact of the antimicrobials on the solubility of the sealers, the release of chloride ions (Cl—), and the pH value were examined. Statistical Analysis Used Analysis was done using one-way analysis of variance and the post hoc Tukey's honestly significant difference test. Results Chloride ions are present in storage media with EndoRez, N2, and Apexit Plus samples (without antimicrobials) following all tested storage intervals. The addition of the antimicrobials increased the release of chloride ions. Endodontic cements without addition of antimicrobials show an increase in weight after 1 month. The highest pH value is measured in Apexit Plus samples. The solutions in which N2 samples (with and without addition of antimicrobials) were stored did not have a significant change in their pH, while in the EndoRez solutions, a significant decrease in the pH value after the first week was measured. Conclusions The addition of antimicrobials might lead to improved characteristics of the root canal sealers.
- Open Access
- 20 June 2018
- Published by Peytchinski Publishing Ltd. in Journal of IMAB – Annual Proceeding (Scientific Papers)
- Vol. 24 (2) , 2058-2064
ASSESSMENT OF PRIMARY AND SECONDARY IMPLANT STABILITY BY RESONANCE FREQUENCY ANALYSIS IN ANTERIOR AND POSTERIOR SEGMENTS OF MAXILLARY EDENTULOUS RIDGES
- 20 June 2018
- Published by Peytchinski Publishing Ltd. in Journal of IMAB – Annual Proceeding (Scientific Papers)
- Vol. 24 (2) , 2058-2064
Open AccessASSESSMENT OF PRIMARY AND SECONDARY IMPLANT STABILITY BY RESONANCE FREQUENCY ANALYSIS IN ANTERIOR AND POSTERIOR SEGMENTS OF MAXILLARY EDENTULOUS RIDGES
- Open Access
- 23 May 2017
- Published by Wiley in BioMed Research International
- Vol. 2017, 1-6
Component Release and Mechanical Properties of Endodontic Sealers following Incorporation of Antimicrobial Agents
Root canal sealers with antimicrobial activity are highly beneficial; therefore, their antimicrobial properties could be improved by incorporation of antimicrobial agents. In the present study, the release of the quaternary ammonium compounds from endodontic sealers admixed with either benzalkonium chloride (BC) or cetylpyridinium chloride (CPC) at loadings of 2% wt was monitored. The effect of these additives on the compressive strengths and their release from the sealers was determined after 1 and 4 weeks. All of the materials studied were found to be capable of releasing antimicrobial additive in useful quantities. The release of CPC occurred to a statistically significant greater extent than BC for all materials. The addition of both BC and CPC generally decreased the compressive strength of all the endodontic sealers, with the exception of CPC in AH Plus, where the compressive strength was significantly increased. This suggests that, for these endodontic sealers, the antimicrobial additives alter the setting chemistry. AH Plus is an epoxy-based material cured with an amine, and in this case the increase in compressive strength with CPC is attributed to an enhanced cure reaction with this system. In all other cases, the additive inhibited the cure reaction to a greater or lesser extent.
- 23 May 2017
- Published by Wiley in BioMed Research International
- Vol. 2017, 1-6
Open AccessComponent Release and Mechanical Properties of Endodontic Sealers following Incorporation of Antimicrobial Agents
Root canal sealers with antimicrobial activity are highly beneficial; therefore, their antimicrobial properties could be improved by incorporation of antimicrobial agents. In the present study, the release of the quaternary ammonium compounds from endodontic sealers admixed with either benzalkonium chloride (BC) or cetylpyridinium chloride (CPC) at loadings of 2% wt was monitored. The effect of these additives on the compressive strengths and their release from the sealers was determined after 1 and 4 weeks. All of the materials studied were found to be capable of releasing antimicrobial additive in useful quantities. The release of CPC occurred to a statistically significant greater extent than BC for all materials. The addition of both BC and CPC generally decreased the compressive strength of all the endodontic sealers, with the exception of CPC in AH Plus, where the compressive strength was significantly increased. This suggests that, for these endodontic sealers, the antimicrobial additives alter the setting chemistry. AH Plus is an epoxy-based material cured with an amine, and in this case the increase in compressive strength with CPC is attributed to an enhanced cure reaction with this system. In all other cases, the additive inhibited the cure reaction to a greater or lesser extent.