Takashi Hosoda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takashi Hosoda has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hamid Bashiri-Atrabi
Ph.D. Student, Dept. of Urban Management, Graduate School of Engineering, Kyoto Univ., Kyoto 615-8540, Japan
4 shared publications - Manoj Langhi
Institute of Infrastructure Technology Research and Management
2 shared publications - Subhasish Dey
Indian Institute of Technology Gandhinagar
2 shared publications - Alhinai Saif
Department of Urban Management, Graduate School of Engineering , Kyoto University , C1-No.3, Kyoto-Daigaku-Katsura, Nishikyo-ku, Kyoto , 615-8540 , Japan
1 shared publication - Bryan William Karney
Univ. of Toronto
1 shared publication - Hidekazu Shirai
Assistant Manager, Coastal Engineering & Management Division, Sanyo Techno Marine, Inc., Tokyo, Japan
1 shared publication
Latest Publications
- 4 November 2019
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 58 (4) , 638-652
Experimental and numerical simulation of bidirectional propagation of an air cavity
This study numerically and experimentally investigates the transient flow associated with a so-called Benjamin bubble, but, in contrast to previous studies, the approach permits bidirectional flow. Two experiments investigated the bidirectional propagation of an air cavity in a square tank; these two events were also simulated using a three-dimensional numerical model. An exactly conservative semi-Lagrangian scheme was employed to solve both the advection term in the momentum equation and the advection equation of the volume of fluid function. The model was compared with previous one-dimensional Benjamin bubble experimental data and a one-dimensional Boussinesq model. For the one-dimensional Benjamin bubble experiments, the three-dimensional model showed good agreement with both published data and a one-dimensional non-hydrostatic model. After modelling the advance of a one-dimensional cavity, a bidirectional Benjamin bubble was simulated using the three-dimensional model. The numerical results are in reasonable agreement with observations of the free surface and pressurized regions and reasonably predict the shape of the air–water interface.
- 4 November 2019
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 58 (4) , 638-652
Experimental and numerical simulation of bidirectional propagation of an air cavity
This study numerically and experimentally investigates the transient flow associated with a so-called Benjamin bubble, but, in contrast to previous studies, the approach permits bidirectional flow. Two experiments investigated the bidirectional propagation of an air cavity in a square tank; these two events were also simulated using a three-dimensional numerical model. An exactly conservative semi-Lagrangian scheme was employed to solve both the advection term in the momentum equation and the advection equation of the volume of fluid function. The model was compared with previous one-dimensional Benjamin bubble experimental data and a one-dimensional Boussinesq model. For the one-dimensional Benjamin bubble experiments, the three-dimensional model showed good agreement with both published data and a one-dimensional non-hydrostatic model. After modelling the advance of a one-dimensional cavity, a bidirectional Benjamin bubble was simulated using the three-dimensional model. The numerical results are in reasonable agreement with observations of the free surface and pressurized regions and reasonably predict the shape of the air–water interface.
- 1 July 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 144 (7)
Analytical Solution of k-ϵ Model for Nonuniform Flows
An analytical solution of the standard model is proposed to study the turbulent characteristics of nonuniform flow. Initially, the most suitable functional forms are assumed for turbulent kinetic energy, , turbulence dissipation rate, , and streamwise velocity, , and the coefficients of the power series of all three variables are determined by solving Reynolds equation and the standard equation for nonuniform flow. Additionally, to investigate the effect of the damping function on velocity and length scale, an analytical solution is further formulated by incorporating the damping function into the basic equations. The appropriateness of the analytical solution is verified with experimental data for the most accelerated flow and the most decelerated flow. The profile of turbulent energy dissipation increased near the free surface when the damping function was included in the analytical solution. Moreover, depending on the nature of the nonuniform flow, the turbulent energy is dissipated more for accelerated flow than for decelerated flow. The eddy viscosity reduced near the free surface due to the pronounced effect of the damping function. Turbulent mixing is also damped in the accelerated flow and amplified in the decelerated flow. Finally, the effective distributions of , , , and eddy viscosity for nonuniform flow ensured the desirability of the functional form presumed for turbulent kinetic energy, turbulence dissipation rate, and velocity.- 1 July 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 144 (7)
Analytical Solution of k-ϵ Model for Nonuniform Flows
An analytical solution of the standard model is proposed to study the turbulent characteristics of nonuniform flow. Initially, the most suitable functional forms are assumed for turbulent kinetic energy, , turbulence dissipation rate, , and streamwise velocity, , and the coefficients of the power series of all three variables are determined by solving Reynolds equation and the standard equation for nonuniform flow. Additionally, to investigate the effect of the damping function on velocity and length scale, an analytical solution is further formulated by incorporating the damping function into the basic equations. The appropriateness of the analytical solution is verified with experimental data for the most accelerated flow and the most decelerated flow. The profile of turbulent energy dissipation increased near the free surface when the damping function was included in the analytical solution. Moreover, depending on the nature of the nonuniform flow, the turbulent energy is dissipated more for accelerated flow than for decelerated flow. The eddy viscosity reduced near the free surface due to the pronounced effect of the damping function. Turbulent mixing is also damped in the accelerated flow and amplified in the decelerated flow. Finally, the effective distributions of , , , and eddy viscosity for nonuniform flow ensured the desirability of the functional form presumed for turbulent kinetic energy, turbulence dissipation rate, and velocity.- 28 June 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 57 (1) , 122-130
Assessment of two-equation model for simulation of air pocket advancing into a rectangular duct
This research aims to evaluate the influence of air on the water surface and pressure profiles in two-phase (air–water) flow. In previous studies, the authors used the continuity and momentum equations for water in a one-dimensional finite volume model. In the present study, the authors additionally incorporate both the mass conservation and momentum equations for incompressible fluids as basic equations for the air portion. Momentum equations were integrated for the free surface and pressurized flow regions after interface observations made at each time step. To correct velocity and pressure in the pressurized portion, the authors used the highly simplified mark-and-cell method. A pressure drop equation is used at the interface of pressurized and free surface flows to deduce the pressure. The Harten total variation diminishing scheme was used to avoid numerical oscillations. The results were compared with experimental data and numerical simulations without considering the air effect.
- 28 June 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 57 (1) , 122-130
Assessment of two-equation model for simulation of air pocket advancing into a rectangular duct
This research aims to evaluate the influence of air on the water surface and pressure profiles in two-phase (air–water) flow. In previous studies, the authors used the continuity and momentum equations for water in a one-dimensional finite volume model. In the present study, the authors additionally incorporate both the mass conservation and momentum equations for incompressible fluids as basic equations for the air portion. Momentum equations were integrated for the free surface and pressurized flow regions after interface observations made at each time step. To correct velocity and pressure in the pressurized portion, the authors used the highly simplified mark-and-cell method. A pressure drop equation is used at the interface of pressurized and free surface flows to deduce the pressure. The Harten total variation diminishing scheme was used to avoid numerical oscillations. The results were compared with experimental data and numerical simulations without considering the air effect.
- 27 April 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 57 (1) , 13-25
Numerical modelling of simultaneous overtopping and seepage flows with application to dike breaching
Dike failures due to overtopping frequently occur during floods, causing serious damage to settlements and the environment. For risk management, it is of great importance to understand the mechanisms of dike failure and predict this process accurately. In this study, a three-dimensional numerical model is developed to simulate both overtopping and seepage flows during dike breaching. The governing equations describing the free water flow are extended and applied to simulate also the filtration through porous media. A non-equilibrium sediment transport model is utilized for simulation of the bed deformation. The numerical model is firstly applied to flows over a solid embankment in order to validate the flow part of the model, and then the dike breaching is simulated such that the bed deformation model is also incorporated. By comparison with the experimental results, it is shown that the developed model reproduces overflow and the dike failure processes reasonably well.
- 27 April 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 57 (1) , 13-25
Numerical modelling of simultaneous overtopping and seepage flows with application to dike breaching
Dike failures due to overtopping frequently occur during floods, causing serious damage to settlements and the environment. For risk management, it is of great importance to understand the mechanisms of dike failure and predict this process accurately. In this study, a three-dimensional numerical model is developed to simulate both overtopping and seepage flows during dike breaching. The governing equations describing the free water flow are extended and applied to simulate also the filtration through porous media. A non-equilibrium sediment transport model is utilized for simulation of the bed deformation. The numerical model is firstly applied to flows over a solid embankment in order to validate the flow part of the model, and then the dike breaching is simulated such that the bed deformation model is also incorporated. By comparison with the experimental results, it is shown that the developed model reproduces overflow and the dike failure processes reasonably well.
- 23 April 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 56 (5) , 753-754
Non-hydrostatic free surface flows by Oscar Castro-Orgaz and Willi H. Hager, Advances in Geophysical and Environmental Mechanics and Mathematics. Berlin, Springer-Verlag, 2017, 696 pp., €207.99, ISBN 978-3-319-47971-2 (online), ISBN 978-3-319-47969-9 (print)
(2018). Non-hydrostatic free surface flows by Oscar Castro-Orgaz and Willi H. Hager, Advances in Geophysical and Environmental Mechanics and Mathematics. Berlin, Springer-Verlag, 2017, 696 pp., €207.99, ISBN 978-3-319-47971-2 (online), ISBN 978-3-319-47969-9 (print). Journal of Hydraulic Research: Vol. 56, No. 5, pp. 753-754.
- 23 April 2018
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 56 (5) , 753-754
Non-hydrostatic free surface flows by Oscar Castro-Orgaz and Willi H. Hager, Advances in Geophysical and Environmental Mechanics and Mathematics. Berlin, Springer-Verlag, 2017, 696 pp., €207.99, ISBN 978-3-319-47971-2 (online), ISBN 978-3-319-47969-9 (print)
(2018). Non-hydrostatic free surface flows by Oscar Castro-Orgaz and Willi H. Hager, Advances in Geophysical and Environmental Mechanics and Mathematics. Berlin, Springer-Verlag, 2017, 696 pp., €207.99, ISBN 978-3-319-47971-2 (online), ISBN 978-3-319-47969-9 (print). Journal of Hydraulic Research: Vol. 56, No. 5, pp. 753-754.
- 1 December 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 142 (12)
Propagation of an Air-Water Interface from Pressurized to Free-Surface Flow in a Circular Pipe
Hydraulic transients with the movement of an interface between pressurized flow and free surface flow can be observed in rapid water emptying in the pipes. This study focuses on air cavity intrusion into horizontal and inclined circular pipes. Laboratory experiments were carried out to observe the negative surge during depressurization in a circular pipe. In order to generate the undular bore in a circular pipe, in some cases a sharp-crested weir at the open end of the horizontal pipe was used. Various behaviors of air cavity were observed for a series of weir heights. A numerical model is proposed and applied to the cavity flow in a circular pipe. To reproduce the undular bore in circular pipes (when water depth is greater than pipe radius), this study derived the depth-averaged shallow water equations with the effects of vertical acceleration using the Boussinesq equation. In this study, the continuity and the momentum equations of free surface and pressurized flows with the hydrostatic and the ...
- 1 December 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 142 (12)
Propagation of an Air-Water Interface from Pressurized to Free-Surface Flow in a Circular Pipe
Hydraulic transients with the movement of an interface between pressurized flow and free surface flow can be observed in rapid water emptying in the pipes. This study focuses on air cavity intrusion into horizontal and inclined circular pipes. Laboratory experiments were carried out to observe the negative surge during depressurization in a circular pipe. In order to generate the undular bore in a circular pipe, in some cases a sharp-crested weir at the open end of the horizontal pipe was used. Various behaviors of air cavity were observed for a series of weir heights. A numerical model is proposed and applied to the cavity flow in a circular pipe. To reproduce the undular bore in circular pipes (when water depth is greater than pipe radius), this study derived the depth-averaged shallow water equations with the effects of vertical acceleration using the Boussinesq equation. In this study, the continuity and the momentum equations of free surface and pressurized flows with the hydrostatic and the ...
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 16 (4)
Mathematical Modeling of the Injection of Grout into a Horizontal Slot
This study presents a mathematical model for the injection of Bingham fluid as common grout material into a horizontal slot formed between parallel plates. The proposed model consisted of a grout reservoir model, a slot model, and an intermediate model that bridged the former two models. The authors showed that it is necessary to include a grout reservoir model in the injection model to avoid singularity of velocity when the grout penetration length is zero. This approach also allowed investigation of the initial stage flow condition during the injection process, especially at the inlet of the slot. Based on the proposed model, the approximate solution for the grout penetration length at the initial stage of injection was also derived. The performance of the proposed model was compared against a well-established model under laminar flow condition.
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 16 (4)
Mathematical Modeling of the Injection of Grout into a Horizontal Slot
This study presents a mathematical model for the injection of Bingham fluid as common grout material into a horizontal slot formed between parallel plates. The proposed model consisted of a grout reservoir model, a slot model, and an intermediate model that bridged the former two models. The authors showed that it is necessary to include a grout reservoir model in the injection model to avoid singularity of velocity when the grout penetration length is zero. This approach also allowed investigation of the initial stage flow condition during the injection process, especially at the inlet of the slot. Based on the proposed model, the approximate solution for the grout penetration length at the initial stage of injection was also derived. The performance of the proposed model was compared against a well-established model under laminar flow condition.
- 25 August 2015
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 53 (6) , 814-819
The motion of entrapped air cavities in inclined ducts
The paper reports a study of the water surface profile of an entrapped air cavity while emptying water in an initially filled inclined duct. A one-dimensional (1D) model, which consists of the continuity and momentum equations applicable for open channel flow, pipe flow and air–water interface flow, is developed based on the finite volume method. A pressure drop model is proposed to reproduce a better profile around the cavity front, with a particular focus on air pressure changes inside the confined cavity to simulate a kind of transient flow with an entrapped air cavity. In contrast to the previous studies, the application of the model shows that when the pressure drop is not considered and the air pressure is not changed, the confined cavity soon vanishes. A comparison between the simulated and experimental results shows that the model is able to accurately reproduce the water surface profile of an entrapped air cavity while emptying inclined ducts.
- 25 August 2015
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 53 (6) , 814-819
The motion of entrapped air cavities in inclined ducts
The paper reports a study of the water surface profile of an entrapped air cavity while emptying water in an initially filled inclined duct. A one-dimensional (1D) model, which consists of the continuity and momentum equations applicable for open channel flow, pipe flow and air–water interface flow, is developed based on the finite volume method. A pressure drop model is proposed to reproduce a better profile around the cavity front, with a particular focus on air pressure changes inside the confined cavity to simulate a kind of transient flow with an entrapped air cavity. In contrast to the previous studies, the application of the model shows that when the pressure drop is not considered and the air pressure is not changed, the confined cavity soon vanishes. A comparison between the simulated and experimental results shows that the model is able to accurately reproduce the water surface profile of an entrapped air cavity while emptying inclined ducts.
- 1 April 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 139 (4) , 433-443
Velocity Deformation Model for Unsteady Open-Channel Flows over Smooth and Rough Beds
A one-dimensional depth-averaged velocity deformation model is developed to study the characteristics of the unsteady flows in open channels. The vertical profile of the streamwise velocity is expressed in a power series, and the coefficients of the velocity are evaluated by using the unsteady equation of motion. A concise form of the friction velocity for unsteady nonuniform flow is then proposed by utilizing the coefficients of the power series. The applicability of the model is validated with experimental data, producing reasonably good agreement between the model results and the observed data. Finally, the deformation of velocity at the surface is assured by comparing velocity distribution of numerical model with the computational results from a previous model.
- 1 April 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Hydraulic Engineering
- Vol. 139 (4) , 433-443
Velocity Deformation Model for Unsteady Open-Channel Flows over Smooth and Rough Beds
A one-dimensional depth-averaged velocity deformation model is developed to study the characteristics of the unsteady flows in open channels. The vertical profile of the streamwise velocity is expressed in a power series, and the coefficients of the velocity are evaluated by using the unsteady equation of motion. A concise form of the friction velocity for unsteady nonuniform flow is then proposed by utilizing the coefficients of the power series. The applicability of the model is validated with experimental data, producing reasonably good agreement between the model results and the observed data. Finally, the deformation of velocity at the surface is assured by comparing velocity distribution of numerical model with the computational results from a previous model.
- 14 May 2012
- Published by Taylor & Francis in International Journal of River Basin Management
- Vol. 10 (2) , 205-211
Two-dimensional analysis of flow patterns around a single backward-facing step
A depth-averaged two-dimensional (2D) numerical model is applied to predict the flow over a single backward-facing step. The model is established using the finite-volume method on a curvilinear grid. The 2D basic governing shallow water equations used in the generalized curvilinear coordinate system are solved. This paper focuses on the generation of shockwaves and hydraulic jumps downstream of the step, in addition to the depth of the supercritical stream immediately downstream of the step. Such flow features occur because of the sudden change in the geometry of the channel, such as the abrupt expansion in the flow cross-section. The backwater effect due to in the water depth downstream the step is also considered. Six experimental cases are carried out with a water-free-fall step, a partially submerged step and fully submerged step. By comparing the numerical results with observed laboratory experimental results, the model is capable of reproducing the above-mentioned flow features, and shows a good agreement with the measured data. This study analyses the flow over a backward-facing step, better knowledge of which can reduce flood risk problems in urban rivers.
- 14 May 2012
- Published by Taylor & Francis in International Journal of River Basin Management
- Vol. 10 (2) , 205-211
Two-dimensional analysis of flow patterns around a single backward-facing step
A depth-averaged two-dimensional (2D) numerical model is applied to predict the flow over a single backward-facing step. The model is established using the finite-volume method on a curvilinear grid. The 2D basic governing shallow water equations used in the generalized curvilinear coordinate system are solved. This paper focuses on the generation of shockwaves and hydraulic jumps downstream of the step, in addition to the depth of the supercritical stream immediately downstream of the step. Such flow features occur because of the sudden change in the geometry of the channel, such as the abrupt expansion in the flow cross-section. The backwater effect due to in the water depth downstream the step is also considered. Six experimental cases are carried out with a water-free-fall step, a partially submerged step and fully submerged step. By comparing the numerical results with observed laboratory experimental results, the model is capable of reproducing the above-mentioned flow features, and shows a good agreement with the measured data. This study analyses the flow over a backward-facing step, better knowledge of which can reduce flood risk problems in urban rivers.