Cyril Hnatovsky
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cyril Hnatovsky has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Stephen James Mihailov
National Research Council Canada, Ottawa, ON, Canada
6 shared publications - Huimin Ding
Quantum and Nanotechnologies Research Center, National Research Council Canada, Ottawa, ON, Canada
4 shared publications - Dan Grobnic
National Research Council Canada, 100 Sussex Drive, Ottawa, ON K1A 0R6, Canada
3 shared publications - Manny De Silva
Quantum and Nanotechnologies Research Center, National Research Council Canada, Ottawa, ON, Canada
3 shared publications - Ping Lu
Quantum and Nanotechnologies Research Center, National Research Council Canada, Ottawa, ON, Canada
3 shared publications - Robert B. Walker
Quantum and Nanotechnologies Research Center, National Research Council of Canada, 100 Sussex Drive, Ottawa, Ontario, Canada K1A 0R6
3 shared publications
Latest Publications
- Open Access
- 3 June 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (11) , 861
Characterization of the Second Harmonic Generation of Boron Nitride Nanotube Macroscopic Assemblies
Boron nitride nanotubes (BNNTs) are predicted to be promising one-dimensional nonlinear optical materials, but to date, only one experimental observation has been made using individual nanotubes. In this work, second harmonic generation (SHG) was achieved from free-standing bulk BNNT sheets and BNNT coatings on silica substrates. Focusing femtosecond infrared (fs-IR) laser pulses with a wavelength of 800 nm onto the BNNT assemblies resulted in strong SHG at a wavelength of 400 nm. It was observed that due to the thickness variation of the BNNT assemblies and orientational alignment of BNNTs in the assemblies, the intensity of the second-harmonic (SH) radiation changed dramatically when different locations on the samples were investigated. Among all the BNNT assemblies tested, the localized SH response and its dependence on the polarization of the excitation fs-IR pulses were the strongest in BNNT coatings produced by a dip-coating process. By measuring the SH response, the uniformity, reproducibility, and efficiency of BNNT deposition processes could be assessed. For applications requiring a high SH response from BNNT assemblies, the process of dip coating is preferred.
- 3 June 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (11) , 861
Open AccessCharacterization of the Second Harmonic Generation of Boron Nitride Nanotube Macroscopic Assemblies
Boron nitride nanotubes (BNNTs) are predicted to be promising one-dimensional nonlinear optical materials, but to date, only one experimental observation has been made using individual nanotubes. In this work, second harmonic generation (SHG) was achieved from free-standing bulk BNNT sheets and BNNT coatings on silica substrates. Focusing femtosecond infrared (fs-IR) laser pulses with a wavelength of 800 nm onto the BNNT assemblies resulted in strong SHG at a wavelength of 400 nm. It was observed that due to the thickness variation of the BNNT assemblies and orientational alignment of BNNTs in the assemblies, the intensity of the second-harmonic (SH) radiation changed dramatically when different locations on the samples were investigated. Among all the BNNT assemblies tested, the localized SH response and its dependence on the polarization of the excitation fs-IR pulses were the strongest in BNNT coatings produced by a dip-coating process. By measuring the SH response, the uniformity, reproducibility, and efficiency of BNNT deposition processes could be assessed. For applications requiring a high SH response from BNNT assemblies, the process of dip coating is preferred.
- Open Access
Long-Term Wavelength Stability of Large Type II FBG Arrays in Different Silica-Based Fibers at High Temperature
Fiber Bragg gratings (FBGs) are useful components in fiber optic sensing systems, which can be highly multiplexed and distributed. In recent years, fabrication using ultrafast lasers has made these devices much more versatile and robust, but questions concerning their high-temperature performance remain. The wavelength resonance of an FBG is naturally sensitive to various parameters of its environment; in particular, changes in the temperature or strain of a fiber tend to induce observable shifts in the Bragg wavelength. Thus, FBGs can offer reliable sensing solutions, provided they are isolated from other influences and their wavelength responses remain well characterized. Nonetheless, it is important to be aware that the isothermal wavelength drift of unstrained FBGs has been previously observed. When this occurs, it can lead to measurement errors and a requirement for sensor recalibration. This study presents a comparison of long-term isothermal wavelength drifts observed at 600 °C, 800 °C, 900 °C and 1000 °C for large numbers of Type II FBGs in different kinds of single-mode fibers. The results provide guidance for the design of high-temperature sensing systems, both in terms of fiber selection and for estimating the maximum time before recalibration becomes necessary to maintain a specified accuracy.
Open AccessLong-Term Wavelength Stability of Large Type II FBG Arrays in Different Silica-Based Fibers at High Temperature
Fiber Bragg gratings (FBGs) are useful components in fiber optic sensing systems, which can be highly multiplexed and distributed. In recent years, fabrication using ultrafast lasers has made these devices much more versatile and robust, but questions concerning their high-temperature performance remain. The wavelength resonance of an FBG is naturally sensitive to various parameters of its environment; in particular, changes in the temperature or strain of a fiber tend to induce observable shifts in the Bragg wavelength. Thus, FBGs can offer reliable sensing solutions, provided they are isolated from other influences and their wavelength responses remain well characterized. Nonetheless, it is important to be aware that the isothermal wavelength drift of unstrained FBGs has been previously observed. When this occurs, it can lead to measurement errors and a requirement for sensor recalibration. This study presents a comparison of long-term isothermal wavelength drifts observed at 600 °C, 800 °C, 900 °C and 1000 °C for large numbers of Type II FBGs in different kinds of single-mode fibers. The results provide guidance for the design of high-temperature sensing systems, both in terms of fiber selection and for estimating the maximum time before recalibration becomes necessary to maintain a specified accuracy.
- Open Access
Accurate Measurements of a Wavelength Drift in High-Temperature Silica-Fiber Bragg Gratings
Fiber Bragg gratings (FBG) are extensively used to perform high-temperature measurements in harsh environments, however the drift of the characteristic Bragg wavelength affects their long-term stability resulting in an erroneous temperature measurement. Herein we report the most precise and accurate measurements of wavelength drifts available up to date on high-temperature FBGs. The measurements were performed with a set of packaged -phase-shifted FBGs for high wavelength resolution, in caesium and sodium pressure-controlled heat pipes for stable temperature environment and with a tunable laser for stable wavelength measurements with a 0.1 pm resolution. Using this dataset we outline the experimental caveats that can lead to inconsistent results and confusion in measuring wavelength drifts, namely: influence of packaging; interchangeability of FBGs produced under identical conditions; birefringence of -phase-shifted FBGs; initial transient behaviour of FBGs at constant temperature and dependence on the previous thermal history of FBGs. In addition, we observe that the wavelength stability of -phase-shifted gratings at lower temperature is significantly improved upon by annealing at higher temperature. The lowest value of the wavelength drift we obtain is pm·h at 600 °C (corresponding to °C·h) after annealing for 400 h at 1000 °C, the longest annealing time we have tried. The annealing time required to achieve the small drift rate is FBG-specific.Open AccessAccurate Measurements of a Wavelength Drift in High-Temperature Silica-Fiber Bragg Gratings
Fiber Bragg gratings (FBG) are extensively used to perform high-temperature measurements in harsh environments, however the drift of the characteristic Bragg wavelength affects their long-term stability resulting in an erroneous temperature measurement. Herein we report the most precise and accurate measurements of wavelength drifts available up to date on high-temperature FBGs. The measurements were performed with a set of packaged -phase-shifted FBGs for high wavelength resolution, in caesium and sodium pressure-controlled heat pipes for stable temperature environment and with a tunable laser for stable wavelength measurements with a 0.1 pm resolution. Using this dataset we outline the experimental caveats that can lead to inconsistent results and confusion in measuring wavelength drifts, namely: influence of packaging; interchangeability of FBGs produced under identical conditions; birefringence of -phase-shifted FBGs; initial transient behaviour of FBGs at constant temperature and dependence on the previous thermal history of FBGs. In addition, we observe that the wavelength stability of -phase-shifted gratings at lower temperature is significantly improved upon by annealing at higher temperature. The lowest value of the wavelength drift we obtain is pm·h at 600 °C (corresponding to °C·h) after annealing for 400 h at 1000 °C, the longest annealing time we have tried. The annealing time required to achieve the small drift rate is FBG-specific. - Open Access
Fiber Bragg Grating Wavelength Drift in Long-Term High Temperature Annealing
High-temperature-resistant fiber Bragg gratings (FBGs) are the main competitors to thermocouples as sensors in applications for high temperature environments defined as being in the 600–1200 °C temperature range. Due to their small size, capacity to be multiplexed into high density distributed sensor arrays and survivability in extreme ambient temperatures, they could provide the essential sensing support that is needed in high temperature processes. While capable of providing reliable sensing information in the short term, their long-term functionality is affected by the drift of the characteristic Bragg wavelength or resonance that is used to derive the temperature. A number of physical processes have been proposed as the cause of the high temperature wavelength drift but there is yet no credible description of this process. In this paper we review the literature related to the long-term wavelength drift of FBGs at high temperature and provide our recent results of more than 4000 h of high temperature testing in the 900–1000 °C range. We identify the major components of the high temperature wavelength drift and we propose mechanisms that could be causing them.
Open AccessFiber Bragg Grating Wavelength Drift in Long-Term High Temperature Annealing
High-temperature-resistant fiber Bragg gratings (FBGs) are the main competitors to thermocouples as sensors in applications for high temperature environments defined as being in the 600–1200 °C temperature range. Due to their small size, capacity to be multiplexed into high density distributed sensor arrays and survivability in extreme ambient temperatures, they could provide the essential sensing support that is needed in high temperature processes. While capable of providing reliable sensing information in the short term, their long-term functionality is affected by the drift of the characteristic Bragg wavelength or resonance that is used to derive the temperature. A number of physical processes have been proposed as the cause of the high temperature wavelength drift but there is yet no credible description of this process. In this paper we review the literature related to the long-term wavelength drift of FBGs at high temperature and provide our recent results of more than 4000 h of high temperature testing in the 900–1000 °C range. We identify the major components of the high temperature wavelength drift and we propose mechanisms that could be causing them.
- Open Access
Ultrafast Laser Processing of Optical Fibers for Sensing Applications
A review of recent progress in the use of infrared femtosecond lasers to fabricate optical fiber sensors that incorporate fiber Bragg gratings (FBG) and random fiber gratings (RFG) is presented. The important advancements in femtosecond laser writing based on the phase mask technique now allow through-the-coating (TTC) fabrication of Bragg gratings in ultra-thin fiber filaments, tilted fiber Bragg gratings, and 1000 °C-resistant fiber Bragg gratings with very strong cladding modes. As an example, through-the-coating femtosecond laser writing is used to manufacture distributed fiber Bragg grating sensor arrays for oil pipeline leak detection. The plane-by-plane femtosecond laser writing technique used for the inscription of random fiber gratings is also reviewed and novel applications of the resultant devices in distributed temperature sensing, fiber lasers and fiber laser sensors are discussed.
Open AccessUltrafast Laser Processing of Optical Fibers for Sensing Applications
A review of recent progress in the use of infrared femtosecond lasers to fabricate optical fiber sensors that incorporate fiber Bragg gratings (FBG) and random fiber gratings (RFG) is presented. The important advancements in femtosecond laser writing based on the phase mask technique now allow through-the-coating (TTC) fabrication of Bragg gratings in ultra-thin fiber filaments, tilted fiber Bragg gratings, and 1000 °C-resistant fiber Bragg gratings with very strong cladding modes. As an example, through-the-coating femtosecond laser writing is used to manufacture distributed fiber Bragg grating sensor arrays for oil pipeline leak detection. The plane-by-plane femtosecond laser writing technique used for the inscription of random fiber gratings is also reviewed and novel applications of the resultant devices in distributed temperature sensing, fiber lasers and fiber laser sensors are discussed.
- Open Access
- 3 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (13) , 4610
Fiber-Optic Bragg Gratings for Temperature and Pressure Measurements in Isotope Production Targets for Nuclear Medicine
A Bragg grating inscribed into an inorganic optical fiber was tested in proton and neutron fields up to doses of 472 Gy. Observation showed that radiation had no effect on the performance of the Fiber Bragg Grating (FBG) used as a gauge measuring temperature and pressure. The FBG sensor was subsequently employed to measure the temperature and pressure inside a liquid isotope production target for nuclear medicine. The fiber Bragg grating measured the temperature and pressure of a water target as a 12 MeV proton beam impinged on it in real time and was tested with beam currents of up to 20 µA.
- 3 July 2020
- Published by MDPI AG in Applied Sciences
- Vol. 10 (13) , 4610
Open AccessFiber-Optic Bragg Gratings for Temperature and Pressure Measurements in Isotope Production Targets for Nuclear Medicine
A Bragg grating inscribed into an inorganic optical fiber was tested in proton and neutron fields up to doses of 472 Gy. Observation showed that radiation had no effect on the performance of the Fiber Bragg Grating (FBG) used as a gauge measuring temperature and pressure. The FBG sensor was subsequently employed to measure the temperature and pressure inside a liquid isotope production target for nuclear medicine. The fiber Bragg grating measured the temperature and pressure of a water target as a 12 MeV proton beam impinged on it in real time and was tested with beam currents of up to 20 µA.