I. A. Nebozhak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
I. A. Nebozhak has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Anatolii M. Verkhovliuk
Фізико-технологічний інститут металів та сплавів НАН України (Київ, Україна)
3 shared publications - Volodymyr S. Doroshenko
Physico-Technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine, Kyiv, Ukraine
3 shared publications D.S. Kanibolotsky
2 shared publications- O. V. Derev’yAnko2 shared publications
- O.V. Derevyanko2 shared publications
A. M. Verkhovliuk
NAS Ukraine, Physicotechnol Inst Met & Alloyz, 34-1 Academician Vernadsky Blvd, UA-08142 Kiev, Ukraine
1 shared publication
Latest Publications
- Open Access
- 30 September 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 119 (3) , 75-87
Market Overview of Lost Foam Metal Casting and Forecast of Its Growth Until 2033 with Prospects of Development and Technology Digitalization
The article presents a comprehensive analysis of the current state, macroeconomic trends, and technological prospects for the development of the Lost Foam Casting (LFC) process, dedicated to its 70th anniversary. Based on current monitoring data from global analytical agencies Grand View Research and Precedence Research, a stable expansion dynamics of the global LFC market is demonstrated, with a projected compound annual growth rate (CAGR) of 7.2% up to 2033. This growth is driven by the modernization of industrial production lines and the global transition to Industry 4.0 standards. Particular attention is paid to the scientific and technological experience of the Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine in the field of digital transformation of pattern production. The concept of introducing additive manufacturing methods, specifically 3D printing of porous polymer patterns, is considered, which allows eliminating the capital-intensive and time-consuming stage of designing and manufacturing traditional metal tooling (molds). A significant advantage of integrating 3D-printed patterns is justified in terms of the absence of the need to recertify existing foundry shop structures, since the metallurgical essence of the casting process and the certification criteria for the final castings remain unchanged. The unexploited potential of the physicochemical and technological factors of LFC is revealed, including methods for regulating heat dissipation through vacuuming the dry sand mold, the possibility of differentiated heat treatment during melt crystallization, and obtaining ultralight frame-cellular structures based on topological optimization algorithms and artificial intelligence. The features of creating cast-reinforced structures for transport engineering with the integration of strengthening frames up to 15% by weight of the casting directly into the pattern body are described. The specific nature of gas-hydrodynamic processes during intense gasification of the polymer in the contact zone with the reinforcement is highlighted. To stabilize gas pressure, a methodology for controlled gas venting via a system of additional ventilation channels is proposed, ensuring both an increase in the geometric accuracy of castings and a high environmental effect due to the neutralization of hydrocarbon compounds. Keywords: lost foam casting; LFC process; 3D printing of patterns; foundry production digitalization; frame reinforcement of castings; topological optimization.
- 30 September 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 119 (3) , 75-87
Open AccessMarket Overview of Lost Foam Metal Casting and Forecast of Its Growth Until 2033 with Prospects of Development and Technology Digitalization
The article presents a comprehensive analysis of the current state, macroeconomic trends, and technological prospects for the development of the Lost Foam Casting (LFC) process, dedicated to its 70th anniversary. Based on current monitoring data from global analytical agencies Grand View Research and Precedence Research, a stable expansion dynamics of the global LFC market is demonstrated, with a projected compound annual growth rate (CAGR) of 7.2% up to 2033. This growth is driven by the modernization of industrial production lines and the global transition to Industry 4.0 standards. Particular attention is paid to the scientific and technological experience of the Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine in the field of digital transformation of pattern production. The concept of introducing additive manufacturing methods, specifically 3D printing of porous polymer patterns, is considered, which allows eliminating the capital-intensive and time-consuming stage of designing and manufacturing traditional metal tooling (molds). A significant advantage of integrating 3D-printed patterns is justified in terms of the absence of the need to recertify existing foundry shop structures, since the metallurgical essence of the casting process and the certification criteria for the final castings remain unchanged. The unexploited potential of the physicochemical and technological factors of LFC is revealed, including methods for regulating heat dissipation through vacuuming the dry sand mold, the possibility of differentiated heat treatment during melt crystallization, and obtaining ultralight frame-cellular structures based on topological optimization algorithms and artificial intelligence. The features of creating cast-reinforced structures for transport engineering with the integration of strengthening frames up to 15% by weight of the casting directly into the pattern body are described. The specific nature of gas-hydrodynamic processes during intense gasification of the polymer in the contact zone with the reinforcement is highlighted. To stabilize gas pressure, a methodology for controlled gas venting via a system of additional ventilation channels is proposed, ensuring both an increase in the geometric accuracy of castings and a high environmental effect due to the neutralization of hydrocarbon compounds. Keywords: lost foam casting; LFC process; 3D printing of patterns; foundry production digitalization; frame reinforcement of castings; topological optimization.
- Open Access
- 31 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (2) , 48-60
Reinforcement of castings in lost foam casting process
Based on the analysis of patent solutions for reinforcement methods, the article investigates the technological features of manufacturing reinforced and bimetallic castings using the lost foam casting (LFC) method. The authors analyze the drawbacks of traditional reinforcement methods in hollow sand molds, the most critical of which are the difficulty of spatial fixation of the reinforcement, the risks of displacement of its elements during mold tilting or transportation, and the high probability of destruction of the sand mold surface when mounting the reinforcement to its walls. The concept of using a polymer pattern not only as a shaping element but also as a reliable mounting base is substantiated. This approach allows for the integration of reinforcing components directly into the pattern body, ensuring high positioning accuracy in the future casting. The dual functional role of the reinforcing elements is noted: in addition to mechanical strengthening, they act as internal micro-chillers, which allows for effective control of crystallization processes, refinement of the metal structure, and minimization of shrinkage defects in massive sections. Attention is also paid to the synergy of the LFC process with additive technologies. The use of 3D printing of polymer patterns makes it possible to create internal niches in the pattern and place reinforcement in them with high geometric precision. The paper presents the practical implementation of this technique on the example of the development of a cast armored barrier with integrated spring elements. The mechanism of the TRIP effect (transformation-induced plasticity) realization for hardened iron-carbon alloys is described, where spring structures act as accumulators of phase transformation energy, which increases the survivability of the structure under dynamic and impact loads. The proposed technology opens up new opportunities for the production of lightweight metal products with differentiated properties, intelligent means of passive protection, and highly loaded mechanical engineering parts.
- 31 May 2026
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metaloznavstvo ta obrobka metalìv
- Vol. 32 (2) , 48-60
Open AccessReinforcement of castings in lost foam casting process
Based on the analysis of patent solutions for reinforcement methods, the article investigates the technological features of manufacturing reinforced and bimetallic castings using the lost foam casting (LFC) method. The authors analyze the drawbacks of traditional reinforcement methods in hollow sand molds, the most critical of which are the difficulty of spatial fixation of the reinforcement, the risks of displacement of its elements during mold tilting or transportation, and the high probability of destruction of the sand mold surface when mounting the reinforcement to its walls. The concept of using a polymer pattern not only as a shaping element but also as a reliable mounting base is substantiated. This approach allows for the integration of reinforcing components directly into the pattern body, ensuring high positioning accuracy in the future casting. The dual functional role of the reinforcing elements is noted: in addition to mechanical strengthening, they act as internal micro-chillers, which allows for effective control of crystallization processes, refinement of the metal structure, and minimization of shrinkage defects in massive sections. Attention is also paid to the synergy of the LFC process with additive technologies. The use of 3D printing of polymer patterns makes it possible to create internal niches in the pattern and place reinforcement in them with high geometric precision. The paper presents the practical implementation of this technique on the example of the development of a cast armored barrier with integrated spring elements. The mechanism of the TRIP effect (transformation-induced plasticity) realization for hardened iron-carbon alloys is described, where spring structures act as accumulators of phase transformation energy, which increases the survivability of the structure under dynamic and impact loads. The proposed technology opens up new opportunities for the production of lightweight metal products with differentiated properties, intelligent means of passive protection, and highly loaded mechanical engineering parts.
- 6 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
Improvement of the Casting Technology for Steel Bucket Tooth according to Lost Foam Casting using Computer Simulation
The research aims to improve the lost foam casting technology for producing steel bucket teeth for excavators. The relevance of this work lies in the need to enhance the quality of castings in challenging operating conditions, as well as to expand the application of advanced casting technologies within the domestic industry. When analysing the process of manufacturing steel bucket teeth using the lost foam technique, the presence of defects in the castings in the form of shrinkage cavities and gas porosity was detected. Using Flow-3D Cast software, computer simulations of the filling and solidification processes of metal were carried out for two variants of the gating-feeding system, the design of which significantly affects the formation of the quality of castings. The simulation results allowed us to analyse the features of the mold filling with metal for the basic version of the gating-feeding system, identify the risks of gasification products entrapment, and assess the effectiveness of the casting feeding during solidification. Based on the data obtained, an improved design of the gating-feeding system was selected to form a high-quality casting without shrinkage defects. The importance of using polystyrene foam patterns with an optimal density (within 25-30 kg/m³) to minimise the negative consequences of their gasification was also shown. The need to install risers on the patterns that perform the function of “overflows” was substantiated, helping to prevent the formation of defects in the casting. A pilot batch of castings confirmed the effectiveness of the developed technological solutions, which provided the basis for their introduction into the serial production of bucket teeth.
- 6 March 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Foundry Engineering
Improvement of the Casting Technology for Steel Bucket Tooth according to Lost Foam Casting using Computer Simulation
The research aims to improve the lost foam casting technology for producing steel bucket teeth for excavators. The relevance of this work lies in the need to enhance the quality of castings in challenging operating conditions, as well as to expand the application of advanced casting technologies within the domestic industry. When analysing the process of manufacturing steel bucket teeth using the lost foam technique, the presence of defects in the castings in the form of shrinkage cavities and gas porosity was detected. Using Flow-3D Cast software, computer simulations of the filling and solidification processes of metal were carried out for two variants of the gating-feeding system, the design of which significantly affects the formation of the quality of castings. The simulation results allowed us to analyse the features of the mold filling with metal for the basic version of the gating-feeding system, identify the risks of gasification products entrapment, and assess the effectiveness of the casting feeding during solidification. Based on the data obtained, an improved design of the gating-feeding system was selected to form a high-quality casting without shrinkage defects. The importance of using polystyrene foam patterns with an optimal density (within 25-30 kg/m³) to minimise the negative consequences of their gasification was also shown. The need to install risers on the patterns that perform the function of “overflows” was substantiated, helping to prevent the formation of defects in the casting. A pilot batch of castings confirmed the effectiveness of the developed technological solutions, which provided the basis for their introduction into the serial production of bucket teeth.
- 30 December 2025
- Published by Kharkiv National Automobile and Highway University in Bulletin of Kharkov National Automobile and Highway University
- No. 111
DEPENDENCE OF THE PROPERTIES OF Fe–Ti–C–B-BASED MATERIALS ON SPS PARAMETERS
Problem. The paper presents research aimed at ob- taining a metal composite from a powder composi- tion based on Fe-Ti-C-B, which contains 75 % Fe- 20 % Ti-5 % B4C using the SPS technology. Metal composites, which contain titanium and boron car- bide in their composition, are of increased interest in industry, where they can be used as tools or structur- al materials. A fairly simple production technology was used, which is currently a very relevant technol- ogical solution. Goal. The purpose of the work is to obtain a metal composite based on Fe-Ti-C-B under SPS conditions using only direct electric current (rectified alternating current) as the energy factor of Joule heat. Methodology. The research was carried out using stationary equipment ERAN2/1, which has the ability to carry out the SPS process using an electric current of a direct component, an optical microscope NEOPHOT-21, X-ray equipment DRON- 3, and a hardness tester TK-2M. Results. The result of the work is the determination of a sufficiently short-term (total duration up to 7 min.) and at the same time optimal mode for obtaining a metal com- posite from a powder composition based on Fe-Ti-C- B, containing 75 % Fe-20 % Ti-5 % B4C, under SPC conditions using direct current. It is demonstrated that there is an appropriate duration of isothermal holding under SPC conditions. An increase or de- crease in the duration of isothermal holding leads to a deterioration in the properties of the material. Morphological studies of the surface showed that at a hardness of 118/115 HRB, there is a clear corres- pondence of the content of ~25–30 % of fine- structure components, which cover a certain spatial region, which clearly indicates compliance with the initial composition of the powder mixture with 75 % Fe-20 % Ti-5 % B4C. Originality. The scientific novelty of the conducted research lies in the innova- tive approach to the implementation of SPC technol- ogy. That is, to implement the SPS process of dis- persed materials, instead of using an electric current of a positive sign, a rectified current was used. This approach increases the efficiency of the SPS process due to the actual absence of frequency components in the electrical signal. Practical value. The practical significance of the research work is determined by the constant need to search for new and innovative technological approaches and practical solutions for SPS technology. Their application allows to reduce, for example, of such technological parameters of SPS as the duration and temperature of the process of obtaining a metal composite. In Ukraine, similar studies are currently being conducted on the produc- tion of metal composites containing boron carbide for "heavy" operating conditions in order to increase wear resistance and extend the service life of ma- chine parts.
- 30 December 2025
- Published by Kharkiv National Automobile and Highway University in Bulletin of Kharkov National Automobile and Highway University
- No. 111
DEPENDENCE OF THE PROPERTIES OF Fe–Ti–C–B-BASED MATERIALS ON SPS PARAMETERS
Problem. The paper presents research aimed at ob- taining a metal composite from a powder composi- tion based on Fe-Ti-C-B, which contains 75 % Fe- 20 % Ti-5 % B4C using the SPS technology. Metal composites, which contain titanium and boron car- bide in their composition, are of increased interest in industry, where they can be used as tools or structur- al materials. A fairly simple production technology was used, which is currently a very relevant technol- ogical solution. Goal. The purpose of the work is to obtain a metal composite based on Fe-Ti-C-B under SPS conditions using only direct electric current (rectified alternating current) as the energy factor of Joule heat. Methodology. The research was carried out using stationary equipment ERAN2/1, which has the ability to carry out the SPS process using an electric current of a direct component, an optical microscope NEOPHOT-21, X-ray equipment DRON- 3, and a hardness tester TK-2M. Results. The result of the work is the determination of a sufficiently short-term (total duration up to 7 min.) and at the same time optimal mode for obtaining a metal com- posite from a powder composition based on Fe-Ti-C- B, containing 75 % Fe-20 % Ti-5 % B4C, under SPC conditions using direct current. It is demonstrated that there is an appropriate duration of isothermal holding under SPC conditions. An increase or de- crease in the duration of isothermal holding leads to a deterioration in the properties of the material. Morphological studies of the surface showed that at a hardness of 118/115 HRB, there is a clear corres- pondence of the content of ~25–30 % of fine- structure components, which cover a certain spatial region, which clearly indicates compliance with the initial composition of the powder mixture with 75 % Fe-20 % Ti-5 % B4C. Originality. The scientific novelty of the conducted research lies in the innova- tive approach to the implementation of SPC technol- ogy. That is, to implement the SPS process of dis- persed materials, instead of using an electric current of a positive sign, a rectified current was used. This approach increases the efficiency of the SPS process due to the actual absence of frequency components in the electrical signal. Practical value. The practical significance of the research work is determined by the constant need to search for new and innovative technological approaches and practical solutions for SPS technology. Their application allows to reduce, for example, of such technological parameters of SPS as the duration and temperature of the process of obtaining a metal composite. In Ukraine, similar studies are currently being conducted on the produc- tion of metal composites containing boron carbide for "heavy" operating conditions in order to increase wear resistance and extend the service life of ma- chine parts.
- Open Access
- 16 August 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metallofizika i Noveishie Tekhnologii
- Vol. 46 (5) , 385-413
The Structure and Properties of G-CuZn15Si4 Cast Brass After Inoculation of Its Melt with Dispersed FeCr Intermetallic Component
- 16 August 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metallofizika i Noveishie Tekhnologii
- Vol. 46 (5) , 385-413
Open AccessThe Structure and Properties of G-CuZn15Si4 Cast Brass After Inoculation of Its Melt with Dispersed FeCr Intermetallic Component
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 31 (3)
Dependence of the tribotechnical properties of the cast composite material of the [Al — FeCr] system, obtained using a dispersed-filled gas model, on the parameters of its microstructure
Проведено аналіз вітчизняної та зарубіжної науково-технічної й патентної літератури, а також сформульовано й поставлено мету цієї науково-дослідної роботи (НДР). Шляхом інокулювання ливарного Al-сплаву марки АК12 ДСТУ 2839:1994 дисперсним інтерметалідом FeCr у «порожнині» ливарної форми (ЛФ) при литті за моделями, що газифікуються, одержали зразки нульмірного литого композиційного матеріалу (ЛКМ) системи [Al — FeCr]. За допомогою металографічного аналізу (МГА) вдалося довести, що параметри його мікроструктури (питома кількість включень σ-фази та її дисперсність) не лише змінюються по висоті литих зразків, але й залежать один від одного. Результати випробувань досліджуваного матеріалу на зношування в умовах сухого тертя показали, що триботехнічні властивості {спрацювання матеріалу контртіла (МКТ), зношування ЛКМ системи [Al — FeCr] й коефіцієнт тертя ковзання пари «ЛКМ системи [Al — FeCr] — сталь 40Х»} залежать як від висоти композитного виливка, так і параметрів його мікроструктури. Із застосуванням МГА та внаслідок випробувань в умовах сухого тертя було експериментально доведено, що спрацювання МКТ та коефіцієнт тертя ковзання пари «Al-сплав АК12 — сталь 40Х» внаслідок армування (композиційного зміцнення) ливарного Al-сплаву марки АК12 дисперсним ін- терметалідом FeCr, у середньому, збільшується від 1,15 мг/(см2·км) та 1,77 до 3,75 мг/(см2·км) та 1,98, відповід- но. Натомість його зношування, у середньому, зменшується від 17,85 мг/(см2·км) до 14,15 мг/(см2·км).
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 31 (3)
Dependence of the tribotechnical properties of the cast composite material of the [Al — FeCr] system, obtained using a dispersed-filled gas model, on the parameters of its microstructure
Проведено аналіз вітчизняної та зарубіжної науково-технічної й патентної літератури, а також сформульовано й поставлено мету цієї науково-дослідної роботи (НДР). Шляхом інокулювання ливарного Al-сплаву марки АК12 ДСТУ 2839:1994 дисперсним інтерметалідом FeCr у «порожнині» ливарної форми (ЛФ) при литті за моделями, що газифікуються, одержали зразки нульмірного литого композиційного матеріалу (ЛКМ) системи [Al — FeCr]. За допомогою металографічного аналізу (МГА) вдалося довести, що параметри його мікроструктури (питома кількість включень σ-фази та її дисперсність) не лише змінюються по висоті литих зразків, але й залежать один від одного. Результати випробувань досліджуваного матеріалу на зношування в умовах сухого тертя показали, що триботехнічні властивості {спрацювання матеріалу контртіла (МКТ), зношування ЛКМ системи [Al — FeCr] й коефіцієнт тертя ковзання пари «ЛКМ системи [Al — FeCr] — сталь 40Х»} залежать як від висоти композитного виливка, так і параметрів його мікроструктури. Із застосуванням МГА та внаслідок випробувань в умовах сухого тертя було експериментально доведено, що спрацювання МКТ та коефіцієнт тертя ковзання пари «Al-сплав АК12 — сталь 40Х» внаслідок армування (композиційного зміцнення) ливарного Al-сплаву марки АК12 дисперсним ін- терметалідом FeCr, у середньому, збільшується від 1,15 мг/(см2·км) та 1,77 до 3,75 мг/(см2·км) та 1,98, відповід- но. Натомість його зношування, у середньому, зменшується від 17,85 мг/(см2·км) до 14,15 мг/(см2·км).
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 31 (2) , 51-61
Influence of microstructure parameters of [Al – FeCr] cast composite material, obtained in the “volume” of foundry mold using lost-foam casting process, on its mechanical characteristics
The authors conducted an in-depth analysis of domestic and foreign literary data, as well as formulated and set the goal of this scientific work. The inoculation of cast Al-based alloy of the AK12 DSTU 2839:1994 with dispersed intermetallic FeCr in the “volume” of the casting mold (CM) during casting by using of Lost-foam casting (LFC-process) allowed to get samples of zero-dimensional cast composite material (CCM) of the system [Al – FeCr]. Metallographic analysis (MGA) showed that the parameters of the microstructure, such as the specific number of σ-phase inclusions and its dispersion, can vary not only along the height of the cast samples, but are also dependent on each other. Mechanical tests of the obtained material showed that not only the height of the composite casting, but also the parameters of its microstructure affect the temporary resistance to rupture, relative elongation and hardness on the Brinell scale. The application of MGA and mechanical tests for the zero-dimensional CCM of the system [Al – FeCr] and, accordingly, for the control casting showed experimentally what a decrease in the average dispersion of σ-phase inclusions from 26.6 μm to 57.1 μm leads to the fact that the temporary resistance to rupture and the relative elongation of the investigated composite decrease from 135 MPa and 2.5 % to 60 MPa and 0.5 %, respectively. At the same time, the increase in the hardness of samples of the zero-dimensional CCM system [Al – FeCr] from 6.923×10-1 GPa to 7.885×10-1 GPa on the Brinell scale is a consequence of the fact that the average dispersion of σ-phase inclusions in the structure of the studied composite decreases from 26.6 μm to 57.1 μm. The results of the conducted research also made it possible to find out that the increase in the specific number of σ-phase inclusions from 63 mm-2 to 263 mm-2 is the reason for the increase in the temporary resistance to rupture and the relative elongation of the zero-dimensional CCM of the system [Al – FeCr] from 60 MPa and 0.5 % up to 135 MPa and 2.5 %, respectively. However, the hardness of the composite casting, which was determined according to the Brinell scale, and under the condition that the specific number of σ-phase inclusions in the structure of the zero-dimensional CCM of the system [Al – FeCr] is in the range given above, as a result decreases from 7.885×10-1 GPa to 6.923×10-1 GPa.
- 1 January 2023
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 31 (2) , 51-61
Influence of microstructure parameters of [Al – FeCr] cast composite material, obtained in the “volume” of foundry mold using lost-foam casting process, on its mechanical characteristics
The authors conducted an in-depth analysis of domestic and foreign literary data, as well as formulated and set the goal of this scientific work. The inoculation of cast Al-based alloy of the AK12 DSTU 2839:1994 with dispersed intermetallic FeCr in the “volume” of the casting mold (CM) during casting by using of Lost-foam casting (LFC-process) allowed to get samples of zero-dimensional cast composite material (CCM) of the system [Al – FeCr]. Metallographic analysis (MGA) showed that the parameters of the microstructure, such as the specific number of σ-phase inclusions and its dispersion, can vary not only along the height of the cast samples, but are also dependent on each other. Mechanical tests of the obtained material showed that not only the height of the composite casting, but also the parameters of its microstructure affect the temporary resistance to rupture, relative elongation and hardness on the Brinell scale. The application of MGA and mechanical tests for the zero-dimensional CCM of the system [Al – FeCr] and, accordingly, for the control casting showed experimentally what a decrease in the average dispersion of σ-phase inclusions from 26.6 μm to 57.1 μm leads to the fact that the temporary resistance to rupture and the relative elongation of the investigated composite decrease from 135 MPa and 2.5 % to 60 MPa and 0.5 %, respectively. At the same time, the increase in the hardness of samples of the zero-dimensional CCM system [Al – FeCr] from 6.923×10-1 GPa to 7.885×10-1 GPa on the Brinell scale is a consequence of the fact that the average dispersion of σ-phase inclusions in the structure of the studied composite decreases from 26.6 μm to 57.1 μm. The results of the conducted research also made it possible to find out that the increase in the specific number of σ-phase inclusions from 63 mm-2 to 263 mm-2 is the reason for the increase in the temporary resistance to rupture and the relative elongation of the zero-dimensional CCM of the system [Al – FeCr] from 60 MPa and 0.5 % up to 135 MPa and 2.5 %, respectively. However, the hardness of the composite casting, which was determined according to the Brinell scale, and under the condition that the specific number of σ-phase inclusions in the structure of the zero-dimensional CCM of the system [Al – FeCr] is in the range given above, as a result decreases from 7.885×10-1 GPa to 6.923×10-1 GPa.
- Open Access
- 8 February 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 30 (4) , 36-47
Bond nature between reinforcing phase and matrix in cast composite material of Al – FeCr system and reinforcement mechanism of cast Al-alloys obtained using Lost-foam casting process
Bond nature between reinforcing phase and matrix in cast composite material of [Al – FeCr] system and reinforcement mechanism of cast Al-alloys obtained using Lost-foam casting process
- 8 February 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 30 (4) , 36-47
Open AccessBond nature between reinforcing phase and matrix in cast composite material of Al – FeCr system and reinforcement mechanism of cast Al-alloys obtained using Lost-foam casting process
Bond nature between reinforcing phase and matrix in cast composite material of [Al – FeCr] system and reinforcement mechanism of cast Al-alloys obtained using Lost-foam casting process
- Open Access
- 1 January 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 29 (1) , 70-80
Structure of the cast composite material for system [Al – FeCr], obtained by application of dispersonally filled gasifying model
Structure of the cast composite material for system [Al – FeCr], obtained by application of dispersonally filled gasifying model
- 1 January 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metal and Casting of Ukraine
- Vol. 29 (1) , 70-80
Open AccessStructure of the cast composite material for system [Al – FeCr], obtained by application of dispersonally filled gasifying model
Structure of the cast composite material for system [Al – FeCr], obtained by application of dispersonally filled gasifying model
- Open Access
- 1 June 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) in Casting Processes
- Vol. 140 (2) , 53-64
The Influence of Technological Parameters of the Lost Foam Casting Process on the Microstructure of Cast Iron Modified by Disperse Ferrosilicon in the Mold Cavity
Вплив технологічних параметрів ЛГМ-процесу на мікроструктуру сірого чавуну, модифікованого дисперсним феросиліцієм у порожнині ливарної форми
- 1 June 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) in Casting Processes
- Vol. 140 (2) , 53-64
Open AccessThe Influence of Technological Parameters of the Lost Foam Casting Process on the Microstructure of Cast Iron Modified by Disperse Ferrosilicon in the Mold Cavity
Вплив технологічних параметрів ЛГМ-процесу на мікроструктуру сірого чавуну, модифікованого дисперсним феросиліцієм у порожнині ливарної форми