RKRajan Kumar

Rajan Kumar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rajan Kumar has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of Quasi-Static Door Operation on Shear Layer Bifurcations in Supersonic Cavities

    by Skyler Baugher, Datta Gaitonde, Bryce Outten, Rajan Kumar, Rachelle Speth, Scott Sherer

    Span-wise homogeneous supersonic cavity flows display complicated structures due to shear layer breakdown, flow acoustic resonance, and even non-linear hydrodynamic-acoustic interactions. In practical applications, such as aircraft bays, the cavity is of finite width and has doors, both of which introduce distinctive phenomena that couple with the shear layer at the cavity lip, further modulating shear layer bifurcations and tonal mechanisms. In particular, asymmetric states manifest as ‘tornado’ vortices with significant practical consequences on the design and operation. Both inward- and outward-facing leading-wedge doors, resulting in leading edge shocks directed into and away from the cavity, are examined at select opening angles ranging from 22.5° to 90° (fully open) at Mach 1.6. The computational approach utilizes the Reynolds-Averaged Navier–Stokes equations with a one-equation model and is augmented by experimental observations of cavity floor pressure and surface oil-flow patterns. For the no-doors configuration, the asymmetric results are consistent with a long-time series DDES simulation, previously validated with two experimental databases. When fully open, outer wedge doors (OWD) yield an asymmetric flow, while inner wedge doors (IWD) display only mildly asymmetric behavior. At lower door angles (partially closed cavity), both types of doors display a successive bifurcation of the shear layer, ultimately resulting in a symmetric flow. IWD tend to promote symmetry for all angles observed, with the shear layer experiencing a pitchfork bifurcation at the ‘critical angle’ (67.5°). This is also true for the OWD at the ‘critical angle’ (45°), though an entirely different symmetric flow field is established. The first observation of pitchfork bifurcations (‘critical angle’) for the IWD is at 67.5° and for the OWD, 45°, complementing experimental observations. The back wall signature of the bifurcated shear layer (impingement preference) was found to be indicative of the 3D cavity dynamics and may be used to establish a correspondence between 3D cavity dynamics and the shear layer. Below the critical angle, the symmetric flow field is comprised of counter-rotating vortex pairs at the front and back wall corners. The existence of a critical angle and the process of door opening versus closing indicate the possibility of hysteresis, a preliminary discussion of which is presented.

  • Aerodynamic Characterization of a Generic High-Speed Projectile Configuration

    by Royce Pokela, Rajan Kumar, Joseph D Vasile, James DeSpirito

    A combined experimental and numerical study was conducted on a generic projectile configuration with low-aspect-ratio fins. The main objectives of this study were to characterize the aerodynamic behavior and validate numerical simulations for a range of Mach numbers (0.4–4) to facilitate an understanding of major flow features such as forebody and fin-generated shock waves, crossflow shear layer vortex, and fin vortex interactions. Measurements included forces and moments, surface oil flow visualization, and high-speed shadowgraph imaging. Numerical simulations were performed using the CFD++ solver. The results showed an excellent match between the experimental and numerical force and moment data. Pressure contours obtained using numerical simulations were integrated to obtain the contributions of individual components toward the total normal force on the body. Flow visualization results show a few complex and interesting flow features, such as shear layer roll-up, crossflow and fin tip vortex interactions, and shock-wave–boundary-layer interactions. The effects of vortex strength and location were analyzed to determine their contributions to the overall forces on the model. The database generated will be very useful for further validation of the numerical tool and a better understanding of vortex-dominated supersonic flows.


  • Effect of Relative Jet Temperature in Supersonic Dual-Impinging Jets

    by Vikas N. Bhargav, Yogesh Mehta, Rajan Kumar

    Short takeoff and vertical landing aircraft configurations involve multiple jets that impinge onto the deck surface in tandem and lead to several adverse effects. This study reports on the experimental characterization of supersonic dual-impinging jets by systematically varying their relative jet temperature. A sonic converging and Mach 1.5 converging–diverging (CD) nozzles are employed. The expansion ratio of the converging nozzle is maintained at 0.96, 1.19, and 1.59, and the CD nozzle is operated at a fixed nozzle pressure ratio of 3. The temperature ratio of the jet from the CD nozzle is varied from 1.0, 1.3, and 1.7. For a fixed momentum of the jet pair, an increase in jet temperature intensified the nearfield noise and unsteadiness on the impingement surface. At short impingement heights, resonance in the heated jet was the primary source of unsteadiness. At a fixed impingement height, an increase in jet temperature led to a systematic increase in tonal frequency, while jet instability mode shapes were retained. Furthermore, the mean flowfield of sonic jet and fountain regions remain unaffected, and an increase in supersonic jet velocity is observed. This is also accompanied by an increase in unsteadiness in the fountain upwash.

  • Forebody Articulation at High Angles of Incidence

    by Roopesh Kumar, Devon S. Foster, Rajan Kumar, Benjamin T. Dickinson


  • Control of High-Temperature Impinging Jet Issued from Overexpanded Rocket Nozzle

    by Yogesh Mehta, Vikas N. Bhargav, Rajan Kumar

    High-speed impinging jets issued from the exhaust of a launch vehicle are highly oscillatory and create hazardous conditions for the vehicle structure, affecting the sensitive payloads and personnel due to intense acoustic loads. Therefore, to reduce the unsteadiness of a jet and mitigate its adverse effects, a fundamental understanding of the associated flow and acoustic field is of utmost importance. The present experimental study is one such step to characterize the aeroacoustic properties of a high-temperature jet issued from an overexpanded rocket nozzle. Further, the effectiveness of microjet-based active flow control in reducing the flow unsteadiness and near-field noise levels is also explored. The experiments were performed at different jet stagnation temperatures, and the results were quantified at different impingement heights simulating the takeoff and landing environment of reusable launch vehicles. Mean pressure measurements were mapped on the ground plane using discrete pressure taps. The time-varying pressure component was measured using an unsteady pressure transducer located at the impingement point, and near-field acoustic measurements were carried out using a microphone. In addition, the velocity field was mapped using planar particle image velocimetry. The near-field pressure spectra are broadband, and the magnitude of noise content is a function of jet stagnation temperature. Furthermore, the injection of microjets resulted in a significant attenuation of near-field noise, impingement point pressure fluctuations, and turbulent kinetic energy.


  • Flowfield and Noise Characteristics of Supersonic Rectangular Impinging Jet

    by Yogesh Mehta, Vikas Nataraj Bhargav, Timothy Willms, Rajan Kumar

    View Video Presentation: https://doi.org/10.2514/6.2022-3896.vid Supersonic impinging jets are of interest to both engineers and researchers for their practical applications, such as short take-off and vertical landing aircraft, and from a fundamental physics point of view. A vast amount of research has been devoted to the axisymmetric jets. Under certain conditions, these jets are known to be resonance-dominated and have strong unsteadiness and acoustic signature. However, much less is known about the non-axisymmetric jets impinging on the ground. The present study is a step toward examining the flowfield and noise characteristics of a supersonic rectangular jet issuing from an ideally expanded Mach 1.44 nozzle impinging on the surface normal to the jet axis. The flowfield was qualitatively visualized using the schlieren technique. Further, the unsteady pressure measurements on the ground were carried out using a high-frequency Kulite pressure transducer over a range of impingement distances. In addition, the nearfield acoustic measurements were performed in different planes relative to the nozzle exit. The qualitative flowfield results show coherent structures and sharp acoustic waves similar to the axisymmetric nozzles. The minor axis showed rapid shear layer growth compared to the major axis. The pressure fluctuations measured on the impingement point were substantially high, reaching peak values close to 186 dB. The wall jet unsteady pressures in two axes showed a difference of 5 dB in some instances. Similarly, the acoustic results indicated multiple discrete high amplitude impingement tones, showing unique directivity in the two axes. The results suggest that rectangular impinging jets can simultaneously undergo multiple modes and the remaining tones are the linear combinations of two base frequencies. And lastly, the acoustic spectrogram showed staging phenomena similar to circular nozzles, and most impingement tones can be estimated using Powell’s theoretical model.

  • Role of Compressibility on Crossflow Separation and Vortex Asymmetry on Slender Axisymmetric Bodies at High Angles of Incidence

    by Adrianne Brown, Yogesh Mehta, Rajan Kumar

    View Video Presentation: https://doi.org/10.2514/6.2022-3890.vid Smart projectiles require pitching up and down at high angles of attack at subsonic and supersonic speeds to achieve their needed trajectory. During these complex maneuvers, crossflow separation leads to the onset of both symmetric and asymmetric vortex pairs depending on the angle of attack. The formation of these asymmetric vortices results in large side forces and yawing moments. This phenomenon is known as phantom yaw. The goal of the current work is to investigate the effects of compressibility on crossflow separation and vortex asymmetry. In the present experimental study, the flow over a conical forebody is studied upto an angle of attack of 30° at subsonic, transonic, and supersonic speeds. Surface oil flow visualization and shadowgraphy were utilized for the qualitative flowfield description. Further, force measurements were also carried out to obtain aerodynamic characteristics. The oil flow and shadowgraphy results showed distinct flowfield features such as crossflow and the onset of vortex asymmetry at higher angle of attacks. The force measurements suggest that the side force coefficient is strongly dependent on the angle of attack. Further, results showed that the Reynolds number showed some dependency on the magnitude of the side force coefficient and the onset of vortex asymmetry. The onset of vortex asymmetry changed as the Mach number is varied in the subsonic regime. And lastly, the magnitude of the side force coefficient was relatively unchanged for most subsonic flows but became zero at supersonic speeds.