Karthikeyan Natarajan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Karthikeyan Natarajan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Lakshmi Venkatakrishnan
Experimental AeroDynam. Div., CSIR-National Aerosp. Labs., Bangalore, Karnataka, India
4 shared publications- Jonas Gustavsson
Florida Center for Advanced Aero-Propulsion (FCAAP), FAMU-FSU College of Engineering, Tallahassee, USA
2 shared publications Rajan Kumar
Florida State University, Tallahassee, Florida 32310
2 shared publications- Rajan Kumar
Florida Center for Advanced Aero-Propulsion (FCAAP), FAMU-FSU College of Engineering, Tallahassee, USA
2 shared publications - Yogesh Mehta
Florida A&M University-Florida State University College of Engineering
2 shared publications Ashwin K. Subramanyam
National Aerospace Laboratories
1 shared publication
Latest Publications
- 1 April 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (4) , 2423-2440
Effect of Nozzle Spacing in Supersonic Twin Impinging Jets
The study of supersonic twin impinging jets is of significant interest to scientists and engineers for the fundamental understanding of flow physics and its applications. The present experimental i...
- 1 April 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (4) , 2423-2440
Effect of Nozzle Spacing in Supersonic Twin Impinging Jets
The study of supersonic twin impinging jets is of significant interest to scientists and engineers for the fundamental understanding of flow physics and its applications. The present experimental i...
- 1 February 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (2) , 699-711
Application of Phase-Averaging Methods to Sweeping Supersonic Jets
This paper examines various methods for phase averaging the flowfield of a sweeping supersonic jet emanating from a scaled fluidic oscillator. Determination of the phase-averaged flowfield is chall...
- 1 February 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 60 (2) , 699-711
Application of Phase-Averaging Methods to Sweeping Supersonic Jets
This paper examines various methods for phase averaging the flowfield of a sweeping supersonic jet emanating from a scaled fluidic oscillator. Determination of the phase-averaged flowfield is chall...
- 1 November 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (11) , 4486-4500
Experimental Characterization of Supersonic Flow over a Wall-Mounted Hemisphere
Supersonic flow over a wall-mounted hemisphere was experimentally investigated to understand the shock-wave/boundary-layer interactions, flow separation, and other complex flow features associated ...
- 1 November 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (11) , 4486-4500
Experimental Characterization of Supersonic Flow over a Wall-Mounted Hemisphere
Supersonic flow over a wall-mounted hemisphere was experimentally investigated to understand the shock-wave/boundary-layer interactions, flow separation, and other complex flow features associated ...
- 1 November 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (11) , 4530-4543
Shock-Wave/Boundary-Layer Interactions on an Axisymmetric Body at Mach 2
The flow physics associated with shock-wave/boundary-layer interactions (SBLIs) on an axisymmetric body, simulating a projectile near an aircraft, is of significant interest to the aerodynamic comm...
- 1 November 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 59 (11) , 4530-4543
Shock-Wave/Boundary-Layer Interactions on an Axisymmetric Body at Mach 2
The flow physics associated with shock-wave/boundary-layer interactions (SBLIs) on an axisymmetric body, simulating a projectile near an aircraft, is of significant interest to the aerodynamic comm...
- 28 July 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Effect of Nozzle Spacing on Flow and Acoustics Characteristics of Supersonic Twin Jets Impinging on an Inclined Surface
View Video Presentation: https://doi.org/10.2514/6.2021-2220.vid The influence of inter nozzle spacing on the flow and acoustic fields of twin supersonic impinging jets impinging on an inclined surface is investigated in the present work. Jets issuing out of M_d=1.5 nozzles were allowed to impinge on a plate inclined to the jet axis at 45°. The spacing between the nozzles was varied between s/d=2.0 and 3.0. The nozzle stand-off distance (h/d) was varied from 3 to 10. Two different orientations of twin nozzles were studied. For the first orientation, the jets were arranged on either side of a central vertical plane, where the jets impinged identically over the inclined flat plate referred to as horizontal orientation. For the second orientation(vertical orientation), the jets were aligned along the vertical plane, such that one jet impinged slightly ahead of the other. Static pressure measurements for s/d=2.0 showed that the fountain flow formed in the inter nozzle region displayed the highest pressures for the horizontal orientation at shorter \hd s. On the other hand, for vertical orientation, the two jets showed dissimilar pressures. Further, the peak pressure in the fountain flow region is found to occur downstream of the geometric impingement point of the jets for both orientations. The acoustic measurements were carried at two azimuthally distributed locations around the twin nozzles aligned with their exit plane. The results showed no discrete high amplitude tones. For any given orientation, the microphone aligned along the plane which contained the two jets recorded higher acoustic levels.
- 28 July 2021
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Effect of Nozzle Spacing on Flow and Acoustics Characteristics of Supersonic Twin Jets Impinging on an Inclined Surface
View Video Presentation: https://doi.org/10.2514/6.2021-2220.vid The influence of inter nozzle spacing on the flow and acoustic fields of twin supersonic impinging jets impinging on an inclined surface is investigated in the present work. Jets issuing out of M_d=1.5 nozzles were allowed to impinge on a plate inclined to the jet axis at 45°. The spacing between the nozzles was varied between s/d=2.0 and 3.0. The nozzle stand-off distance (h/d) was varied from 3 to 10. Two different orientations of twin nozzles were studied. For the first orientation, the jets were arranged on either side of a central vertical plane, where the jets impinged identically over the inclined flat plate referred to as horizontal orientation. For the second orientation(vertical orientation), the jets were aligned along the vertical plane, such that one jet impinged slightly ahead of the other. Static pressure measurements for s/d=2.0 showed that the fountain flow formed in the inter nozzle region displayed the highest pressures for the horizontal orientation at shorter \hd s. On the other hand, for vertical orientation, the two jets showed dissimilar pressures. Further, the peak pressure in the fountain flow region is found to occur downstream of the geometric impingement point of the jets for both orientations. The acoustic measurements were carried at two azimuthally distributed locations around the twin nozzles aligned with their exit plane. The results showed no discrete high amplitude tones. For any given orientation, the microphone aligned along the plane which contained the two jets recorded higher acoustic levels.
- 1 September 2018
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 144 (3_Suppleme) , 1704
An investigation of the interactions between impulsively started and steady supersonic jets
- 1 September 2018
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 144 (3_Suppleme) , 1704
An investigation of the interactions between impulsively started and steady supersonic jets
- 1 October 2017
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 142 (4_Suppleme) , 2490
Investigation of single and twin jet interactions with plates with cut-outs
The design and testing of the launch vehicle structure and its subsystems to withstand the lift-off acoustic loads is quite a daunting task in itself. Any effort to minimize these loads can prove to be highly beneficial as it directly influences the design, weight, and qualification of the launch vehicle components and hence the overall vehicle operating cost and time. The components of launch pad such as the launch platform and jet blast deflector are known to be the principal noise sources of the intense acoustic loads generated during lift-off. They contribute to the overall noise levels experienced by the launch vehicle by either reflecting the noise generated by the jet exhaust or by creating additional sources of noise. Earlier studies showed that the presence of cut-outs in the launch platform significantly affects the overall acoustic loads experienced by the launch vehicle. The present paper attempts to characterize the influence of cut-outs in the launch platform on the noise levels experienced by the launch vehicle, by investigating single and twin jets impinging on flat plates with and without cut-outs at varying lift-off distances. The results from acoustic measurements carried out in the near and far-field of scaled down single and twin jet launch vehicle models are discussed. The paper also attempts to relate changes in acoustic field, brought about by the different platform configurations, to the changes in flow field through flow visualization using the schlieren technique.
- 1 October 2017
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 142 (4_Suppleme) , 2490
Investigation of single and twin jet interactions with plates with cut-outs
The design and testing of the launch vehicle structure and its subsystems to withstand the lift-off acoustic loads is quite a daunting task in itself. Any effort to minimize these loads can prove to be highly beneficial as it directly influences the design, weight, and qualification of the launch vehicle components and hence the overall vehicle operating cost and time. The components of launch pad such as the launch platform and jet blast deflector are known to be the principal noise sources of the intense acoustic loads generated during lift-off. They contribute to the overall noise levels experienced by the launch vehicle by either reflecting the noise generated by the jet exhaust or by creating additional sources of noise. Earlier studies showed that the presence of cut-outs in the launch platform significantly affects the overall acoustic loads experienced by the launch vehicle. The present paper attempts to characterize the influence of cut-outs in the launch platform on the noise levels experienced by the launch vehicle, by investigating single and twin jets impinging on flat plates with and without cut-outs at varying lift-off distances. The results from acoustic measurements carried out in the near and far-field of scaled down single and twin jet launch vehicle models are discussed. The paper also attempts to relate changes in acoustic field, brought about by the different platform configurations, to the changes in flow field through flow visualization using the schlieren technique.
- 1 October 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 140 (4_Suppleme) , 3042
Influence of launch platform cut-outs on flow and acoustic behavior of rocket exhaust
A launch vehicle experiences intense acoustic loading in the initial phase of its lift-off which affects the launch vehicle structure, sensitive payloads, and electronics on board. There is immense interest in alleviation of acoustic loads resulting in reduced need for strengthening of the vehicle structure. The effect of jet blast deflector shape on the acoustic loading has been extensively investigated, both computationally and experimentally, by simulating jet(s) impinging on a flat plate. However, contributions from the launch vehicle environment, such as the launch platform, are often ignored. The motivation for this study is that the flow over the launch platform is likely to be significantly influenced by the cut-outs made in the platform for the nozzles. As the nozzles emerge out from the cut-outs during lift-off, the jet exhaust grows and interacts with the launch platform, contributing to the overall acoustic loads experienced by the vehicle. This paper presents an experimental investigation of rocket exhaust interaction with the launch platform using single and twin jets impinging on a flat plate with cut-outs. The measurements include high speed shadowgraphy and microphone measurements in the near and far-field to enable flow and acoustic characterization.
- 1 October 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 140 (4_Suppleme) , 3042
Influence of launch platform cut-outs on flow and acoustic behavior of rocket exhaust
A launch vehicle experiences intense acoustic loading in the initial phase of its lift-off which affects the launch vehicle structure, sensitive payloads, and electronics on board. There is immense interest in alleviation of acoustic loads resulting in reduced need for strengthening of the vehicle structure. The effect of jet blast deflector shape on the acoustic loading has been extensively investigated, both computationally and experimentally, by simulating jet(s) impinging on a flat plate. However, contributions from the launch vehicle environment, such as the launch platform, are often ignored. The motivation for this study is that the flow over the launch platform is likely to be significantly influenced by the cut-outs made in the platform for the nozzles. As the nozzles emerge out from the cut-outs during lift-off, the jet exhaust grows and interacts with the launch platform, contributing to the overall acoustic loads experienced by the vehicle. This paper presents an experimental investigation of rocket exhaust interaction with the launch platform using single and twin jets impinging on a flat plate with cut-outs. The measurements include high speed shadowgraphy and microphone measurements in the near and far-field to enable flow and acoustic characterization.
- Open Access
- 1 January 2012
- Published by International Whaling Commission in J. Cetacean Res. Manage.
- Vol. 12 (2) , 173-175
Obtaining distributional information on Indian Ocean cetaceans: suggestions based on an Indian network experience
The understanding of the occurrence and distribution of cetaceans in the Indian region is largely based on information that has been incidentally obtained from strandings and bycatches. An attempt was made to compile such data systematically. The resultant database has been made widely accessible by hosting it on the internet. To improve the quality of information collected, identification aids were published on the same website. A stranding booklet was also created, mainly for the use of individuals and organisations with limited access to the internet. The ‘spare capacity’ of individuals and organisations was used to gather information and also to prepare the website and booklets, so that little or no expense was incurred. Recommendations are made regarding the collection of distributional data from the Indian Ocean.
- 1 January 2012
- Published by International Whaling Commission in J. Cetacean Res. Manage.
- Vol. 12 (2) , 173-175
Open AccessObtaining distributional information on Indian Ocean cetaceans: suggestions based on an Indian network experience
The understanding of the occurrence and distribution of cetaceans in the Indian region is largely based on information that has been incidentally obtained from strandings and bycatches. An attempt was made to compile such data systematically. The resultant database has been made widely accessible by hosting it on the internet. To improve the quality of information collected, identification aids were published on the same website. A stranding booklet was also created, mainly for the use of individuals and organisations with limited access to the internet. The ‘spare capacity’ of individuals and organisations was used to gather information and also to prepare the website and booklets, so that little or no expense was incurred. Recommendations are made regarding the collection of distributional data from the Indian Ocean.