HZHuihui Zhu

Huihui Zhu

*This is an algorithmically generated author record based on publicly available information.

Huihui Zhu has a total of 93 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonequilibrium evaporation enables carrier polarity control in Bi‐Te thin films

    by Mengfei He, Mingyang Wang, Huihui Zhu, Ao Liu

    Carrier polarity is a fundamental parameter that defines the electronic functionality of semiconductors. In multielement chalcogenides grown far from equilibrium, the deposited phase can deviate substantially from the nominal source material, providing an alternative route for polarity selection beyond conventional doping and defect control. Here, we show that carrier polarity in thermally evaporated Bi–Te thin films is governed by nonequilibrium compositional fractionation along the evaporation pathway. At the initial stage of deposition, preferential Te incorporation produces an amorphous, strongly Te‐rich phase with robust p‐type transport and high hole concentration. With continued growth, the deposited phase progressively evolves toward Bi 2 Te 3 ‐rich crystalline Bi–Te films, accompanied by the recovery of conventional n‐type behavior. This polarity crossover does not originate from an intrinsic amorphous‐to‐crystalline inversion of Bi 2 Te 3 but from a growth‐induced transition in the dominant conducting phase. These results identify nonequilibrium compositional fractionation as a mechanism for controlling carrier polarity in Bi–Te chalcogenides and demonstrate a route to generate distinct p‐ and n‐type transport regimes within a single material system without external doping.

  • Antisolvent-Free Crystallization-Directed Two-Dimensional/Three-Dimensional Tin Perovskites for Ambient-Tolerant Electronics

    by Yanlin Huang, Mingyang Wang, Youjin Reo, Xiaomin Yang, Sai Bai, Zhikai Le, Ao Liu, Yong-Young Noh, Huihui Zhu

    Tin (Sn2+) halide perovskites offer a promising lead-free semiconductor platform, yet their practical application is hindered by severe ambient instability. Here, we regulate the early-stage oxygen response of mixed-dimensional Sn2+ perovskites through crystallization pathway engineering without introducing additional stabilizing molecules. Removing antisolvent quenching enables gradual solvent evaporation and cation redistribution, leading to a vertically organized structure with a two-dimensional (2D)-rich surface region and a three-dimensional (3D) FASnI3 transport framework. This architecture balances environmental tolerance and charge transport, where low-dimensional regions contribute to oxygen regulation while the 3D framework maintains efficient hole conduction. Field-effect measurements reveal reversible oxygen-induced conductivity enhancement, suggesting weak oxygen adsorption dominates the initial response. Polymer/oxide encapsulation further improves air stability, and integration with oxide n-channel transistors demonstrates the potential of this approach for complementary thin-film electronics.

  • Open Access

    Tin perovskite transistors stabilized through volatile coordination

    by Geonwoong Park, Dong Hyeon Lee, Youjin Reo, Wonryeol Yang, Soohwan Yoo, Wantae Park, Hyeyeon Jung, Hyesun Kim, Sungjae Cho, Mingoo Kwon, et al.

    Tin (Sn2+) halide perovskites are promising lead-free semiconductors for optoelectronic and electronic devices, owing to their tunable bandgaps and favourable charge transport1,2. However, their practical implementation is fundamentally limited by an intrinsic redox instability at undercoordinated Sn2+ sites, which drives uncontrolled self-p-doping and rapid oxidative degradation3,4. Here we introduce a volatile-assisted coordination strategy that reconstructs the perovskite surface through transient acetate coordination and volatilization, which transforms reactive SnI2-terminated surfaces into chemically equilibrated and defect-mitigated interfaces. This surface reconstruction suppresses undercoordinated Sn-related trap states and stabilizes the local stoichiometry, thus enabling p-type transistors with robust transport characteristics, a near-zero threshold voltage and high on/off ratios exceeding 108. More importantly, the reconstructed interface acts as a self-passivating and thermally resilient barrier, resulting in markedly enhanced environmental stability, with devices maintaining stable operation for over 1 month at 100 °C. These results establish volatile-assisted surface reconstruction as an effective method for defect equilibration in metastable semiconductors, and they provide a general strategy for enabling durable, device-grade functionality in Sn2+-based materials.


  • Open Access

    Spin-selective heterogeneous chiral perovskites for circular-polarization-resolved retinomorphic sensors

    by De Yu, Xin Zhang, Tao Wang, Yuheng Li, Ruiqin He, Zeyang Xu, Jixin Tang, Yixuan Zhang, Xinmiao Zhang, Huang Huang, et al.

    As a type of promising hardware for next-generation artificial visual systems with extended perceptual and anti-interference capabilities, circular-polarization-resolved retinomorphic sensors are underexplored due to the lack of suitable chiral materials that enable highly dissymmetric circular-polarization responses and multiple biomimetic functions. Here, we demonstrate a self-assembly heterogeneous microstructure consisting of chiral-deficient grains and chiral-rich grain boundaries in chiral perovskites that simultaneously facilitate spin selectivity and optoelectronic properties for highly dissymmetric and multifunctional circular-polarization-resolved retinomorphic sensors. Our sensors not only exhibit a photocurrent dissymmetry factor as high as 1.98 and a panchromatic circular-polarization-resolved response, but also possess multiple biomimetic functions that simulate human retinas, including synaptic behaviors, light adaptation, and color recognition. As a proof-of-concept, we respectively demonstrate their applications using a sensor array that resolves a single circular-polarization handedness for information encryption, as well as binocular sensor arrays that resolve the opposite circular-polarization handedness for virtual stereoscopic reconstruction.


  • Open Access

    Chiral perovskites for circularly polarized light detection

    by Liping Du, Ao Liu, Huihui Zhu

    In recent years, chiral metal halide perovskites (CMHPs) have emerged as promising candidates for next-generation circularly polarized light (CPL) photodetectors, owing to their intrinsic chirality, tunable optoelectronic properties, and compatibility with cost-effective solution processing. Unlike other CPL-responsive materials, CMHPs uniquely integrate strong chiroptical activity with semiconducting behavior, enabling direct polarization-resolved detection without auxiliary optical components. This review systematically summarizes recent progress in CMHPs-based CPL photodetection, encompassing fundamental chiroptical principles, structure–property relationships, and representative device architectures, including photoconductors, photodiodes, and phototransistors. Emphasis is placed on the emerging application potential of CPL detectors and the enabling role of CMHPs in achieving polarization-sensitive functionality. Key challenges and future directions are also discussed, such as enhancing chiroptical responses, designing intrinsically chiral three-dimensional perovskites, and realizing scalable, integrable device arrays. By clarifying current advances and outlining future research priorities, this review aims to guide innovation in CMHPs-enabled CPL optoelectronics.


  • Top Cited Papers

    Semimetal-in-oxide design for tellurium-based p-type oxide electronics

    by Mingyang Wang, Huihui Zhu, Yong-Young Noh, Ao Liu


  • Open Access

    Sulfur redox mediator for low-temperature flexible amorphous oxide CMOS electronics

    by Mingyang Wang, Taoyu Zou, Youjin Reo, Yong-Sung Kim, Min Gyu Kim, Minwoo Choi, Yongyoung Park, Kiyeon Yang, Youngjae Kang, Huihui Zhu, et al.

    Amorphous p-type oxides are essential for next-generation flexible and scalable complementary metal-oxide semiconductor (CMOS) technologies. Among emerging candidates, tellurium-based oxides (Te-TeO x ) show great promise due to their unique Te-Te conduction networks embedded within the amorphous TeO 2 matrix. However, controlled formation of these conduction channels remains challenging, limiting both hole transport and dopability under low thermal budgets. Here, we report a sulfur-mediated redox strategy that modulates the local bonding environment via TeO 2 dissociation and partial Te 4+ reduction, promoting formation of short-chain Te-Te networks. This enables high-performance p-channel thin-film transistors processed at an ultralow temperature of 120°C, exhibiting an average hole mobility of 11.5 cm 2 V −1 s −1 and on/off current ratios around 10 6 with high uniformity and reproducibility. Integration with n-type counterparts enables all-oxide CMOS circuits on both flexible and rigid substrates, including inverters with gain up to 1694, ring oscillators operating at 339 kHz, and large-scale functional circuits with rail-to-rail output.


  • Open Access

    Author Correction: Selenium-alloyed tellurium oxide for amorphous p-channel transistors

    by Ao Liu, Yong-Sung Kim, Min Gyu Kim, Youjin Reo, Taoyu Zou, Taesu Choi, Sai Bai, Huihui Zhu, Yong-Young Noh

  • Open Access

    Alkyl Additive‐Mediated Growth of Two‐Dimensional Tin Halide Perovskites for Efficient Charge Transport

    by Youjin Reo, Taewan Roh, Taesu Choi, Geonwoong Park, Soohwan Yoo, Hyeyeon Jung, Ao Liu, Huihui Zhu, Yong‐Young Noh

    Solution‐processed two‐dimensional (2D) tin (Sn 2+ )‐halide perovskites have achieved great milestones in (opto)electronic devices. The fabrication of high‐quality 2D Sn 2+ ‐halide perovskite films has remained a difficult challenge due to the Lewis acidity of Sn 2+ and its rapid crystallization. Herein, incorporating an alkyl additive, 1,8‐diiodooctane (DIO), to mediate growth of 2D Sn 2+ ‐halide perovskites by chelating with tin‐iodide [SnI 6 ] 4− inorganic octahedral cage at the intermediate iodide vacancies is suggested. The chelation of DIO and 2D Sn 2+ ‐halide perovskites promotes deceleration of film crystallization, producing high‐quality films with homogeneous connection of lattice aligned parallel to the substrates. The optimized DIO‐incorporated 2D Sn 2+ ‐halide perovskite transistors and phototransistors demonstrate more than twofolds the field‐effect mobility compared to pristine devices, enhanced operational stability, and optoelectronic conversion ability. The incorporation of DIO facilitates the optimal growth of homogeneous 2D Sn 2+ ‐halide perovskite films for emerging halide perovskite‐based (opto)electronics.


  • Effect of high-κ oxide dielectric deposition on the electrical performance and stability of p-channel CuI-based transistors

    by Mingyang Wang, Huihui Zhu, Ao Liu

    High-κ metal-oxide dielectrics are crucial for improving the electrical performance of thin-film transistors (TFTs) for low-voltage, low-power complementary metal-oxide semiconductor technologies. Copper iodide (CuI), a transparent p-type semiconductor compatible with commercial n-type oxides, shows promise for transparent complementary electronics. However, the inherently high hole concentration in pristine CuI channel leads to low mobility, poor on/off current ratios (I on/I off), and large subthreshold swing (SS). Traditional SiO2 dielectric also leads to the high operating voltage, limiting low-power integration. Here, we systematically investigate the effects of atomic layer deposition (ALD) of high-κ Al2O3 and HfO2 dielectrics, deposited under varying conditions, on the electrical performance and bias stability of CuI-based TFTs. Results show that low-temperature (150 °C) deposited Al2O3 and HfO2 gate dielectrics improve hole mobility, I on/I off, and SS, while high-temperature (250 °C) deposition enhances bias stress stability by reducing defects and impurities. The TFT with a 150 °C HfO2 gate dielectric achieved the best overall performance with an I on/I off of over 106 and a low SS of 80 mV/decade, approaching theoretical limits at room temperature. This work underscores the potential of high-κ dielectrics in developing low-voltage, stable CuI-based TFTs for advanced complementary electronics.