Ao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ao Liu has a total of 214 co-authors. Here are the top co-authors by number of shared publications:
- Yong-Young Noh
Pohang University of Science and Technology
35 shared publications - Huihui Zhu
School of Physics, University of Electronic Science and Technology of China, Chengdu, China
24 shared publications Huihui Zhu
University of Electronic Science and Technology of China
20 shared publications- Youjin Reo
Pohang University of Science and Technology (POSTECH)
15 shared publications - Sai Bai
University of Electronic Science and Technology of China
11 shared publications Youjin Reo
Department of Chemical Engineering Pohang University of Science and Technology Pohang Gyeongbuk Republic of Korea
9 shared publications
Latest Publications
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (9) , 6109-6116
CdCl2-Enabled Hysteresis Suppression in Vapor-Deposited Tin Perovskite Transistors
Tin halide perovskites are promising lead-alternative semiconductors that have demonstrated remarkable advances as channel materials for p-type thin-film transistors (TFTs). However, their practical use in TFTs remains limited by severe self p-doping and pronounced hysteresis. Here, we introduce CdCl2 into vapor-deposited CsSnI3 to obtain p-type TFTs with strongly suppressed hysteresis and an on/off current ratio of ∼106. The partial passivation of iodide vacancies by Cl– induced a reduction of ion migration, thereby mitigating hysteresis. In addition, the incorporation of CdCl2 lowered the thermal activation barrier for complete perovskite phase formation and enhanced the structural resilience of the film. These results establish additive engineering as an effective route to regulate vacancy chemistry, suppress ion migration, and lower the thermal budget of vapor-deposited tin halide perovskite formation, offering a practical design strategy for stable and manufacturing-compatible perovskite electronics.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (9) , 6109-6116
CdCl2-Enabled Hysteresis Suppression in Vapor-Deposited Tin Perovskite Transistors
Tin halide perovskites are promising lead-alternative semiconductors that have demonstrated remarkable advances as channel materials for p-type thin-film transistors (TFTs). However, their practical use in TFTs remains limited by severe self p-doping and pronounced hysteresis. Here, we introduce CdCl2 into vapor-deposited CsSnI3 to obtain p-type TFTs with strongly suppressed hysteresis and an on/off current ratio of ∼106. The partial passivation of iodide vacancies by Cl– induced a reduction of ion migration, thereby mitigating hysteresis. In addition, the incorporation of CdCl2 lowered the thermal activation barrier for complete perovskite phase formation and enhanced the structural resilience of the film. These results establish additive engineering as an effective route to regulate vacancy chemistry, suppress ion migration, and lower the thermal budget of vapor-deposited tin halide perovskite formation, offering a practical design strategy for stable and manufacturing-compatible perovskite electronics.
- Open Access
- 17 August 2026
- Published by Wiley in InfoScience
- Vol. 3 (3) , e70020
Nonequilibrium evaporation enables carrier polarity control in Bi‐Te thin films
Carrier polarity is a fundamental parameter that defines the electronic functionality of semiconductors. In multielement chalcogenides grown far from equilibrium, the deposited phase can deviate substantially from the nominal source material, providing an alternative route for polarity selection beyond conventional doping and defect control. Here, we show that carrier polarity in thermally evaporated Bi–Te thin films is governed by nonequilibrium compositional fractionation along the evaporation pathway. At the initial stage of deposition, preferential Te incorporation produces an amorphous, strongly Te‐rich phase with robust p‐type transport and high hole concentration. With continued growth, the deposited phase progressively evolves toward Bi 2 Te 3 ‐rich crystalline Bi–Te films, accompanied by the recovery of conventional n‐type behavior. This polarity crossover does not originate from an intrinsic amorphous‐to‐crystalline inversion of Bi 2 Te 3 but from a growth‐induced transition in the dominant conducting phase. These results identify nonequilibrium compositional fractionation as a mechanism for controlling carrier polarity in Bi–Te chalcogenides and demonstrate a route to generate distinct p‐ and n‐type transport regimes within a single material system without external doping.
- 17 August 2026
- Published by Wiley in InfoScience
- Vol. 3 (3) , e70020
Open AccessNonequilibrium evaporation enables carrier polarity control in Bi‐Te thin films
Carrier polarity is a fundamental parameter that defines the electronic functionality of semiconductors. In multielement chalcogenides grown far from equilibrium, the deposited phase can deviate substantially from the nominal source material, providing an alternative route for polarity selection beyond conventional doping and defect control. Here, we show that carrier polarity in thermally evaporated Bi–Te thin films is governed by nonequilibrium compositional fractionation along the evaporation pathway. At the initial stage of deposition, preferential Te incorporation produces an amorphous, strongly Te‐rich phase with robust p‐type transport and high hole concentration. With continued growth, the deposited phase progressively evolves toward Bi 2 Te 3 ‐rich crystalline Bi–Te films, accompanied by the recovery of conventional n‐type behavior. This polarity crossover does not originate from an intrinsic amorphous‐to‐crystalline inversion of Bi 2 Te 3 but from a growth‐induced transition in the dominant conducting phase. These results identify nonequilibrium compositional fractionation as a mechanism for controlling carrier polarity in Bi–Te chalcogenides and demonstrate a route to generate distinct p‐ and n‐type transport regimes within a single material system without external doping.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6548-6555
Antisolvent-Free Crystallization-Directed Two-Dimensional/Three-Dimensional Tin Perovskites for Ambient-Tolerant Electronics
Tin (Sn2+) halide perovskites offer a promising lead-free semiconductor platform, yet their practical application is hindered by severe ambient instability. Here, we regulate the early-stage oxygen response of mixed-dimensional Sn2+ perovskites through crystallization pathway engineering without introducing additional stabilizing molecules. Removing antisolvent quenching enables gradual solvent evaporation and cation redistribution, leading to a vertically organized structure with a two-dimensional (2D)-rich surface region and a three-dimensional (3D) FASnI3 transport framework. This architecture balances environmental tolerance and charge transport, where low-dimensional regions contribute to oxygen regulation while the 3D framework maintains efficient hole conduction. Field-effect measurements reveal reversible oxygen-induced conductivity enhancement, suggesting weak oxygen adsorption dominates the initial response. Polymer/oxide encapsulation further improves air stability, and integration with oxide n-channel transistors demonstrates the potential of this approach for complementary thin-film electronics.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6548-6555
Antisolvent-Free Crystallization-Directed Two-Dimensional/Three-Dimensional Tin Perovskites for Ambient-Tolerant Electronics
Tin (Sn2+) halide perovskites offer a promising lead-free semiconductor platform, yet their practical application is hindered by severe ambient instability. Here, we regulate the early-stage oxygen response of mixed-dimensional Sn2+ perovskites through crystallization pathway engineering without introducing additional stabilizing molecules. Removing antisolvent quenching enables gradual solvent evaporation and cation redistribution, leading to a vertically organized structure with a two-dimensional (2D)-rich surface region and a three-dimensional (3D) FASnI3 transport framework. This architecture balances environmental tolerance and charge transport, where low-dimensional regions contribute to oxygen regulation while the 3D framework maintains efficient hole conduction. Field-effect measurements reveal reversible oxygen-induced conductivity enhancement, suggesting weak oxygen adsorption dominates the initial response. Polymer/oxide encapsulation further improves air stability, and integration with oxide n-channel transistors demonstrates the potential of this approach for complementary thin-film electronics.
- Open Access
- 1 July 2026
- Published by Springer Nature in Nature
- Vol. 655 (8122) , 357-363
Tin perovskite transistors stabilized through volatile coordination
Tin (Sn2+) halide perovskites are promising lead-free semiconductors for optoelectronic and electronic devices, owing to their tunable bandgaps and favourable charge transport1,2. However, their practical implementation is fundamentally limited by an intrinsic redox instability at undercoordinated Sn2+ sites, which drives uncontrolled self-p-doping and rapid oxidative degradation3,4. Here we introduce a volatile-assisted coordination strategy that reconstructs the perovskite surface through transient acetate coordination and volatilization, which transforms reactive SnI2-terminated surfaces into chemically equilibrated and defect-mitigated interfaces. This surface reconstruction suppresses undercoordinated Sn-related trap states and stabilizes the local stoichiometry, thus enabling p-type transistors with robust transport characteristics, a near-zero threshold voltage and high on/off ratios exceeding 108. More importantly, the reconstructed interface acts as a self-passivating and thermally resilient barrier, resulting in markedly enhanced environmental stability, with devices maintaining stable operation for over 1 month at 100 °C. These results establish volatile-assisted surface reconstruction as an effective method for defect equilibration in metastable semiconductors, and they provide a general strategy for enabling durable, device-grade functionality in Sn2+-based materials.
- 1 July 2026
- Published by Springer Nature in Nature
- Vol. 655 (8122) , 357-363
Open AccessTin perovskite transistors stabilized through volatile coordination
Tin (Sn2+) halide perovskites are promising lead-free semiconductors for optoelectronic and electronic devices, owing to their tunable bandgaps and favourable charge transport1,2. However, their practical implementation is fundamentally limited by an intrinsic redox instability at undercoordinated Sn2+ sites, which drives uncontrolled self-p-doping and rapid oxidative degradation3,4. Here we introduce a volatile-assisted coordination strategy that reconstructs the perovskite surface through transient acetate coordination and volatilization, which transforms reactive SnI2-terminated surfaces into chemically equilibrated and defect-mitigated interfaces. This surface reconstruction suppresses undercoordinated Sn-related trap states and stabilizes the local stoichiometry, thus enabling p-type transistors with robust transport characteristics, a near-zero threshold voltage and high on/off ratios exceeding 108. More importantly, the reconstructed interface acts as a self-passivating and thermally resilient barrier, resulting in markedly enhanced environmental stability, with devices maintaining stable operation for over 1 month at 100 °C. These results establish volatile-assisted surface reconstruction as an effective method for defect equilibration in metastable semiconductors, and they provide a general strategy for enabling durable, device-grade functionality in Sn2+-based materials.
- Open Access
- 30 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Wafer-scale uniform non-ferroelectric κ-phase In2Se3 transistors
Two-dimensional (2D) indium selenide (In2Se3) has great potential for next-generation processing-in-memory applications owing to high intrinsic carrier mobility and strong ferroelectricity. However, the lack of wafer-scale, back-end-of-line (BEOL) compatible growth and inherent polarization-induced hysteresis limit their viability in logic circuits. Here, we report thermal evaporation of a non-ferroelectric κ-phase In2Se3 film that forms uniformly over 4-inch wafer-scale at κ-phase formation with an indirect bandgap of 1.45 eV and n-type conduction. The unique atomic arrangement suppresses spontaneous polarization, eliminating hysteresis in field-effect transistors (FETs). The κ-In2Se3 FETs exhibit enhancement-mode operation, high field-effect mobility of 39.3 cm2 V⁻1 s⁻1, and stable switching over 1000 cycles, enabled by reduced trap states and contact resistance. By integrating κ-In2Se3 with a p-type selenium-alloyed tellurium oxide FET, we demonstrate a complementary inverter with full-swing operation and high voltage gain. These results establish κ-In2Se3 as a scalable 2D semiconductor platform for BEOL-compatible logic integration.
- 30 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessWafer-scale uniform non-ferroelectric κ-phase In2Se3 transistors
Two-dimensional (2D) indium selenide (In2Se3) has great potential for next-generation processing-in-memory applications owing to high intrinsic carrier mobility and strong ferroelectricity. However, the lack of wafer-scale, back-end-of-line (BEOL) compatible growth and inherent polarization-induced hysteresis limit their viability in logic circuits. Here, we report thermal evaporation of a non-ferroelectric κ-phase In2Se3 film that forms uniformly over 4-inch wafer-scale at κ-phase formation with an indirect bandgap of 1.45 eV and n-type conduction. The unique atomic arrangement suppresses spontaneous polarization, eliminating hysteresis in field-effect transistors (FETs). The κ-In2Se3 FETs exhibit enhancement-mode operation, high field-effect mobility of 39.3 cm2 V⁻1 s⁻1, and stable switching over 1000 cycles, enabled by reduced trap states and contact resistance. By integrating κ-In2Se3 with a p-type selenium-alloyed tellurium oxide FET, we demonstrate a complementary inverter with full-swing operation and high voltage gain. These results establish κ-In2Se3 as a scalable 2D semiconductor platform for BEOL-compatible logic integration.
- Open Access
- 30 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Spin-selective heterogeneous chiral perovskites for circular-polarization-resolved retinomorphic sensors
As a type of promising hardware for next-generation artificial visual systems with extended perceptual and anti-interference capabilities, circular-polarization-resolved retinomorphic sensors are underexplored due to the lack of suitable chiral materials that enable highly dissymmetric circular-polarization responses and multiple biomimetic functions. Here, we demonstrate a self-assembly heterogeneous microstructure consisting of chiral-deficient grains and chiral-rich grain boundaries in chiral perovskites that simultaneously facilitate spin selectivity and optoelectronic properties for highly dissymmetric and multifunctional circular-polarization-resolved retinomorphic sensors. Our sensors not only exhibit a photocurrent dissymmetry factor as high as 1.98 and a panchromatic circular-polarization-resolved response, but also possess multiple biomimetic functions that simulate human retinas, including synaptic behaviors, light adaptation, and color recognition. As a proof-of-concept, we respectively demonstrate their applications using a sensor array that resolves a single circular-polarization handedness for information encryption, as well as binocular sensor arrays that resolve the opposite circular-polarization handedness for virtual stereoscopic reconstruction.
- 30 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSpin-selective heterogeneous chiral perovskites for circular-polarization-resolved retinomorphic sensors
As a type of promising hardware for next-generation artificial visual systems with extended perceptual and anti-interference capabilities, circular-polarization-resolved retinomorphic sensors are underexplored due to the lack of suitable chiral materials that enable highly dissymmetric circular-polarization responses and multiple biomimetic functions. Here, we demonstrate a self-assembly heterogeneous microstructure consisting of chiral-deficient grains and chiral-rich grain boundaries in chiral perovskites that simultaneously facilitate spin selectivity and optoelectronic properties for highly dissymmetric and multifunctional circular-polarization-resolved retinomorphic sensors. Our sensors not only exhibit a photocurrent dissymmetry factor as high as 1.98 and a panchromatic circular-polarization-resolved response, but also possess multiple biomimetic functions that simulate human retinas, including synaptic behaviors, light adaptation, and color recognition. As a proof-of-concept, we respectively demonstrate their applications using a sensor array that resolves a single circular-polarization handedness for information encryption, as well as binocular sensor arrays that resolve the opposite circular-polarization handedness for virtual stereoscopic reconstruction.
- Open Access
- 19 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (22) , e72842
Reliable Vapor‐Deposited Tin Perovskites for High‐Performance and Low‐Power Complementary Electronics
Tin (Sn 2+ ) perovskites are promising lead‐free semiconductors for high‐performance p‐type thin‐film transistors (TFTs), yet their reproducibility and reliability remain a major obstacle. Subtle variations in precursor chemistry and solvent coordination critically influence colloidal dynamics and crystallization, leading to inconsistent film quality and device performance. Here, we systematically benchmark multiple commercial Sn 2+ precursors across both solution and vapor deposition routes. While solution‐processed devices exhibit strong precursor dependence, vapor‐deposited films yield consistent TFT performance, achieving hole mobility (∼30 cm 2 V −1 s −1 ) and excellent stability regardless of precursor origin. By leveraging thermodynamically driven separation of volatile impurities prior to film nucleation, the vapor‐phase process standardizes crystallization dynamics and enables precursor‐agnostic formation of uniform and dense films with large grains. Built on this robust and scalable platform, integrated p‐type Sn 2+ ‐perovskite/n‐type oxide circuits deliver high gain and ultra‐low static power consumption at the picowatt level, establishing vapor‐phase deposition as a reliable route for low‐power complementary electronics.
- 19 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (22) , e72842
Open AccessReliable Vapor‐Deposited Tin Perovskites for High‐Performance and Low‐Power Complementary Electronics
Tin (Sn 2+ ) perovskites are promising lead‐free semiconductors for high‐performance p‐type thin‐film transistors (TFTs), yet their reproducibility and reliability remain a major obstacle. Subtle variations in precursor chemistry and solvent coordination critically influence colloidal dynamics and crystallization, leading to inconsistent film quality and device performance. Here, we systematically benchmark multiple commercial Sn 2+ precursors across both solution and vapor deposition routes. While solution‐processed devices exhibit strong precursor dependence, vapor‐deposited films yield consistent TFT performance, achieving hole mobility (∼30 cm 2 V −1 s −1 ) and excellent stability regardless of precursor origin. By leveraging thermodynamically driven separation of volatile impurities prior to film nucleation, the vapor‐phase process standardizes crystallization dynamics and enables precursor‐agnostic formation of uniform and dense films with large grains. Built on this robust and scalable platform, integrated p‐type Sn 2+ ‐perovskite/n‐type oxide circuits deliver high gain and ultra‐low static power consumption at the picowatt level, establishing vapor‐phase deposition as a reliable route for low‐power complementary electronics.
- 17 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (36) , e72813
In‐situ p‐Doping of Nanometer Tellurium‐based Oxide for Room‐Temperature CMOS Circuits
The development of high‐performance p ‐type oxide semiconductors is crucial for scalable CMOS technologies, yet conventional oxides remain intrinsically difficult to p‐dope owing to the localized nature of oxygen orbitals and strong defect compensation. Here, we report a reaction‐metal‐mediated redox strategy that exploits the deposition environment for intrinsic in situ p ‐type doping of tellurium oxide. Mo‐assisted reduction produces nanometer Te‐based oxide films with tunable Te nanochannels, which form percolative pathways that markedly enhance hole transport. Remarkably, films deposited at room temperature (RT) achieve mobilities above 10 cm 2 V −1 s −1 and carrier densities tunable over more than five orders of magnitude. Co‐integration with n ‐type oxide transistors enables the fabrication of all‐oxide CMOS circuits entirely at RT with robust logic functionality. This intrinsically regulated doping pathway provides a generalizable route to overcome long‐standing bottlenecks in p ‐type oxides and advance oxide semiconductors toward large‐area, flexible CMOS electronics.
- 17 March 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (36) , e72813
In‐situ p‐Doping of Nanometer Tellurium‐based Oxide for Room‐Temperature CMOS Circuits
The development of high‐performance p ‐type oxide semiconductors is crucial for scalable CMOS technologies, yet conventional oxides remain intrinsically difficult to p‐dope owing to the localized nature of oxygen orbitals and strong defect compensation. Here, we report a reaction‐metal‐mediated redox strategy that exploits the deposition environment for intrinsic in situ p ‐type doping of tellurium oxide. Mo‐assisted reduction produces nanometer Te‐based oxide films with tunable Te nanochannels, which form percolative pathways that markedly enhance hole transport. Remarkably, films deposited at room temperature (RT) achieve mobilities above 10 cm 2 V −1 s −1 and carrier densities tunable over more than five orders of magnitude. Co‐integration with n ‐type oxide transistors enables the fabrication of all‐oxide CMOS circuits entirely at RT with robust logic functionality. This intrinsically regulated doping pathway provides a generalizable route to overcome long‐standing bottlenecks in p ‐type oxides and advance oxide semiconductors toward large‐area, flexible CMOS electronics.
- Open Access
- 20 February 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 012003
Chiral perovskites for circularly polarized light detection
In recent years, chiral metal halide perovskites (CMHPs) have emerged as promising candidates for next-generation circularly polarized light (CPL) photodetectors, owing to their intrinsic chirality, tunable optoelectronic properties, and compatibility with cost-effective solution processing. Unlike other CPL-responsive materials, CMHPs uniquely integrate strong chiroptical activity with semiconducting behavior, enabling direct polarization-resolved detection without auxiliary optical components. This review systematically summarizes recent progress in CMHPs-based CPL photodetection, encompassing fundamental chiroptical principles, structure–property relationships, and representative device architectures, including photoconductors, photodiodes, and phototransistors. Emphasis is placed on the emerging application potential of CPL detectors and the enabling role of CMHPs in achieving polarization-sensitive functionality. Key challenges and future directions are also discussed, such as enhancing chiroptical responses, designing intrinsically chiral three-dimensional perovskites, and realizing scalable, integrable device arrays. By clarifying current advances and outlining future research priorities, this review aims to guide innovation in CMHPs-enabled CPL optoelectronics.
- 20 February 2026
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 012003
Open AccessChiral perovskites for circularly polarized light detection
In recent years, chiral metal halide perovskites (CMHPs) have emerged as promising candidates for next-generation circularly polarized light (CPL) photodetectors, owing to their intrinsic chirality, tunable optoelectronic properties, and compatibility with cost-effective solution processing. Unlike other CPL-responsive materials, CMHPs uniquely integrate strong chiroptical activity with semiconducting behavior, enabling direct polarization-resolved detection without auxiliary optical components. This review systematically summarizes recent progress in CMHPs-based CPL photodetection, encompassing fundamental chiroptical principles, structure–property relationships, and representative device architectures, including photoconductors, photodiodes, and phototransistors. Emphasis is placed on the emerging application potential of CPL detectors and the enabling role of CMHPs in achieving polarization-sensitive functionality. Key challenges and future directions are also discussed, such as enhancing chiroptical responses, designing intrinsically chiral three-dimensional perovskites, and realizing scalable, integrable device arrays. By clarifying current advances and outlining future research priorities, this review aims to guide innovation in CMHPs-enabled CPL optoelectronics.
- Top Cited Papers
- 4 February 2026
- Published by Springer Nature in Nature Reviews Electrical Engineering
- Vol. 3 (4) , 205-207
Semimetal-in-oxide design for tellurium-based p-type oxide electronics
- 4 February 2026
- Published by Springer Nature in Nature Reviews Electrical Engineering
- Vol. 3 (4) , 205-207
Top Cited PapersSemimetal-in-oxide design for tellurium-based p-type oxide electronics