AHAvesahemad S. N. Husainy

Avesahemad S. N. Husainy

*This is an algorithmically generated author record based on publicly available information.

Avesahemad S. N. Husainy has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Enhancement of a Vapor Compression Refrigeration System Using Al2O3, CuO, and Their Hybrid Nanoparticles

    by S. V. Nishandar, Vivek Prabhu, Sandeep Deshpande, Vallabh Apate, Sushant Padalkar, Avesahemad Husainy

    This study presents a comparative analysis of the performance of a vapor compression refrigeration (VCR) system enhanced with Al2O3, CuO, and hybrid Al2O3-CuO nanoparticles, each introduced at a fixed mass fraction of 1%. The objective is to evaluate the influence of different nanoparticle formulations on key performance metrics, including the coefficient of performance (COP), compressor work, and Carnot efficiency. The nanoparticles are dispersed within a secondary cooling loop and tested under steady-state operating conditions. Thermodynamic parameters are recorded for each configuration, and calculations are performed to determine the actual COP and energy input. Results show that Al2O3 nanoparticles enhance the COP by 22.99% and reduce compressor work by 21.65%. CuO nanoparticles achieve an even greater improvement, with a 60.73% increase in COP, thereby demonstrating superior thermal performance. Notably, the hybrid Al2O3-CuO nanoparticles exhibit a synergistic effect, delivering the most significant performance gains, including a reduction in compressor work of up to 30.4%. These findings highlight the potential of hybrid nanoparticles to enhance the energy efficiency and operational reliability of refrigeration systems. This work contributes to the advancement of nano-enhanced thermal systems and provides a foundation for future development of environmentally friendly, high-efficiency cooling technologies.


  • Review on Revolutionary and Sustainable Green Hydrogen: A Future Energy Source

    by Vishal V. Patil, Avesahemad S. N. Husainy, Kaustubh Shedbalkar, Samir N. Momin, Omkar S. Chougule, Prathamesh U. Jadhav, Sanmesh S. Shinde, Paramvir Singh


  • Glance on Advancements and Innovations in Green Hydrogen Production Technologies

    by Avesahemad S. N. Husainy, Vishal V. Patil, Omkar S. Chougule, Prathamesh U. Jadhav, Samir N. Momin, Sanmesh S. Shinde, Paramvir Singh

  • Investigation of Power Consumption of Refrigeration Model and Its Exploratory Data Analysis (EDA) by Using Machine Learning (ML) Algorithm

    by Avesahemad S. N. Husainy, Suresh M. Sawant, Sonali K. Kale, Sagar D. Patil, Sujit V. Kumbhar, Vishal V. Patil, Anirban Sur


  • Open Access

    Medical Additive Manufacturing: Challenges and Features

    by Avesahemad S. N. Husainy, Sagar D. Patil, Rushikesh S. Kokane, Chintamani R. Upadhye, Abhishek V. Chougule

    Over the past 20 years, Medical Additive Manufacturing has been immensely developed and become an essential part of Contemporary healthcare. In the past, additive manufacturing was only utilized to develop basic anatomical models, but as technology evolved, it became more straightforward for researchers to produce complex medical devices. Medical additive manufacturing is a promptly emerging field with the competence to print living tissues and organs for transplantation and produce personalized implants and prostheses with astounding precision and accuracy. The ability of 3D printing to produce products that precisely match a patient’s unique anatomy has significant benefits for medicine, including better patient outcomes. Additive manufacturing is often employed in the orthopedic and dentistry fields to design, build, or produce parts specifically for the patient’s exact and ideal fit. Additionally, it is extensively being utilized to produce surgical equipment and customized anatomical models for pre-surgical planning. This allows surgeons to practice complex procedures on a replica of the patient’s anatomy, improving surgical outcomes and reducing the risk of complications. Experts are exploring the possibility of utilizing 3D printing techniques for developing innovative methods to administer medication, which could improve treatment effectiveness and patient well-being. Additionally, these advancements have contributed immensely to creating human organs through bio-printing technology; a progress that has the potential to revolutionize organ transplants as they exist today by reducing dependence on donors. Another imminent advancement is surgical robotics using robots created through 3D printing procedures working side by side with medical experts thus improving patient outcomes and decreasing risks associated with traditional surgery techniques. Ongoing research and development promise even more groundbreaking applications in the future. This research article gives an attempt at medical additive manufacturing research now, then, and in the future.


  • Open Access

    Review on PCM Heat Sink for Electronic Thermal Management Application

    by Avesahemad S. N. Husainy, Abhishek M. Funde, Aniket B. Sonalkar, Shoaib I. Mulla, Rushikesh S. Gote

    A significant challenge in thermal management has arisen as a result of the rising demand for high-performance electronic devices. The efficiency, size, and weight of conventional cooling methods like liquid and air cooling are constrained. Due to their high storage of latent heat capacity and isothermal phase transition behavior, phase change materials (PCMs) have become a promising thermal management solution. The purpose of this experimental study is to evaluate the performance of a PCM heat sink for electronic thermal regulation. The PCM heat sink is made up of a PCM module attached to a typical heat sink. To improve heat dissipation capabilities, the PCM module uses a PCM material with a suitable phase change temperature and encapsulation. The experimental setup involves simulating real-world operating conditions by applying controlled heat loads to electronic components. By observing temperature changes, thermal resistance, and transient response, the PCM heat sink’s thermal performance is assessed. To evaluate the superiority of the PCM heat sink, a comparison is made with traditional air-cooled and liquid-cooled heat sink configurations. The experimental investigation’s findings show that the PCM heat sink performs better in terms of thermal management than traditional cooling techniques. The phase change process used by the PCM efficiently absorbs and stores extra heat produced by electronic parts, improving temperature regulation and lowering temperature gradients. Lower component temperatures and higher operational reliability are the results of the PCM heat sink’s improved thermal resistance and heat dissipation efficiency. A further benefit of the PCM heat sink’s isothermal behavior during the phase transition is that it prevents temperature spikes and lessens the effects of heat stress on the electronic devices. The long cooling times provided by the PCM material’s high latent heat storage capacity allow for prolonged operation without affecting device performance. This experimental study concludes by demonstrating the efficiency of a PCM heat sink for electronic thermal management. The design of heat sinks with PCM integration offers notable enhancements in temperature control, thermal resistance, and system overall reliability. The results of this research help to advance thermal management strategies, which makes it easier to create efficient electronic devices with better cooling capacities.


  • Open Access

    Robotic Solutions for Air Duct Cleaning: An Overview of Current Research and Applications

    by Avesahemad S. N. Husainy, Sachin S. Wagh, Shubham V. Kore, Akash P. Burud, Devang G. Hajare

    According to studies conducted abroad, the HVAC system is to blame for 70% or more of all IAQ problems, and most of these problems are brought on by inadequate system care and maintenance. The lungs of a building, the air ducts, can accumulate deposits of construction grime, dust, tar from cigarettes, insects, smoke and other airborne contaminants. These distribution systems need to be inspected frequently in order to maintain the high efficiency of the air conditioners and lower effect losses. There is evidence that ventilation ducts in HVAC systems can accumulate dust and serve as breeding grounds for microbes even when they are operating normally. The building’s AC duct placement makes it impossible to clean by hand. An assessment of the current state of knowledge and comprehension about the employment of robots for air duct cleaning is what this review paper intends to do. The various varieties of air duct cleaning robots, as well as their capabilities and effectiveness in comparison to more conventional cleaning techniques, will be examined in this study. The cost, effectiveness, and safety of deploying robots to clean air ducts will also be discussed in this study, along with some of their benefits and drawbacks. The review will also look at the state of research and development in the area and identify any potential trends or difficulties in the use of robots for cleaning air ducts in the future. The paper will include a full evaluation of previous research on the subject, including studies, publications, and reports, as well as the methodology employed. The study will include findings and suggestions about the usage of robots for cleaning air ducts for facility managers, researchers, and air duct cleaning specialists. The paper’s overall goal is to present a thorough overview of the status of technology today and some of its prospective air duct cleaning applications.


  • Open Access

    Review on Smart Algae Bio Panel and its Growth Forecasting Using Machine Learning

    by Avesahemad S. N. Husainy, Omkar S. Chougule, Prathamesh U. Jadhav, Samir N. Momin, Sanmesh S. Shinde

    The world is facing major issues associated with the reliance on fossil fuels for energy supply, including rising prices, greenhouse gas emissions, and the risk of depletion. Various technologies have been developed for fixing carbon dioxide, which contributes to global warming. Biological fixation using photosynthetic microalgae cultured on a large scale is a promising method. In this method, carbon should be either wholly stored in the algal biomass or substituted for fossil fuel. Algal biomass can be degraded to carbon dioxide or methane, which is released to the atmosphere. The use of microalgae as a sustainable source of renewable energy and biofuels has garnered significant attention in recent years. One of the advantages of microalgae is their ability to accumulate high levels of lipids, making them a promising feedstock for biofuel production. Moreover, microalgae can be cultivated on non-arable land and can be grown using alternative water sources such as seawater, which further enhances their potential as a sustainable and environmentally friendly energy source. A photo bioreactor (PBR) is essential equipment for microalgal photosynthetic fixation of CO2. A PBR system implemented in a smart bio panel utilizes algae to trap sunlight energy and convert it into electricity, while also generating biomass as a by-product and acting as a CO2 scrubber. To make the system smart, machine learning algorithms were implemented to monitor and predict the growth rate of the algae Support Vector Machines (SVM) were used to predict the growth behavior of the microalgae, and the results showed that the SVM-based model can predict the growth rate of microalgae with a correlation coefficient of 90 percent. Microalgae biomass production heavily relies on photosynthesis, which only utilizes a small portion of the solar energy, mainly in the blue and red wavelengths. However, in traditional microalgae cultivation, the unused portion of the solar spectrum heats up the algae ponds and causes water evaporation, leading to increased salinity, especially in hot and semi-arid locations.


  • A Glance on Indoor Air Pollutants, their Impacts and Simple Solutions to Avoid Health Related Issues

    by Avesahemad Sn Husainy, Shubham S Kulkarni, Sudhanshu S Rankhambe, Suraj S Haswal, Bharatesh A Ambade, Asiya S Pendhari

    Every coin has two sides. Likewise, as we are progressing towards the era of technology and industrialization; a lot of worst effects are arising as well. Along with the ecosystem, human health is suffering from some adverse issues because of pollution. We have heard about outdoor air pollution but indoor air pollution is even more harmful to human health. It is being observed that Indoor Air Quality (IAQ) is getting worse day by day leading to many lung diseases, breathing issues, low birth rate, eye-related diseases, perinatal conditions, etc. Hence these issues have to be considered before getting too late. Indoor air quality varies from regions i.e. in the case of developed countries; cooling-heating appliances, electric devices, petroleum products, etc. are the major contributors to deplete IAQ. While in case of developing countries which have a huge number of rural areas; biomass open fires, traditional cooking systems with direct fire expose or indoor stove, etc. are the major factors behind damaged indoor air quality. Generally, children and aged persons spend most of their time inside the house. These people have low immunity hence they get easily affected by depleted IAQ and face many health-related issues. There is a long list of harmful pollutants like NOX, COX, SOX, organic matter, etc. that play a significant role in damaging air quality. A ventilation system is essential in offices, theatres, malls, homes, etc. but the occupant devices lower the air quality index. Likewise, green-house effects increase the percentage of COX which damages nature and human health as well. All these factors, parameters, adverse effects and solutions are studied in this paper.