Yegor Piskarev

Unconventional aerial robots with morphing capabilities hold the potential to expand physical interaction functionalities, such as perching and aerial manipulation, but face challenges due to the added weight and complexity of actuators and sensing systems. This work’s hypothesis is that maximum performance can be achieved by developing a dual system that enables perching maneuvers with a rapid, dynamic grasp of structures, eliminating stabilization issues associated with static landing followed by gripping, while simultaneously leveraging the same morphing actuators to enable fully actuated flight to enhance aerodynamic efficiency (by minimizing tilting-induced drag) and interaction with the environment for aerial manipulation. This letter presents a novel soft morphing aerial robot, SCORPION, with these capabilities, powered by Electric Ducted Fans (EDFs) embedded within deformable arms. This design makes the arms more adaptable and impact-resistant by eliminating external moving parts. The arms are actuated by a high-torque tendon system and include custom capacitive stretchable silicone-carbon black sensors. This dual-purpose system allows SCORPION to perch on structures by stabilizing rapidly and dynamically (in under 150 ms) with a mid-air grasp, as well as to fly fully actuated. With only a 12% increase in weight and less than a 10% increase in power consumption, SCORPION demonstrates up to a 15% improvement in forward flight efficiency.

Variable stiffness (VS) has revolutionized miniature surgical instruments, including cardiovascular catheters for minimally invasive surgeries (MISs), enabling advanced capabilities in stiffness modulation and multi-curvature bending. However, existing VS catheters with phase-changing materials are slow in softening and stiffening rates (≈90 s), which can lead to substantial increase in surgery duration. To address the slow stiffness change, we propose a VS catheter based on fiber jamming (FJ) that achieves instant stiffness changes (≤300 ms), enabling seamless catheter operations without delays. Moreover, our catheter, incorporating hundreds of ultrathin fibers into a slender 2.3-mm catheter body, achieves up to 6.5-fold stiffness changes. With adequate stiffness change, our two-segment catheter achieves complex bending profiles within seconds. In addition, the FJ-based design does not require electric currents or heating inside the human body, minimizing patient risks. This FJ-based VS catheter, with instantaneous response, adequate stiffness change, and enhanced safety, can potentially establish benchmarks in MIS, allowing medical practitioners to effectively address formidable diseases.

In minimally invasive surgery, such as cardiac ablation, magnetically steered catheters made of variable‐stiffness materials can enable higher dexterity and higher force application to human tissue. However, the long transition time between soft and rigid states leads to a significant increase in procedure duration. Here, a fast‐response, multisegmented catheter is described for minimally invasive surgery made of variable‐stiffness thread (FRVST) that encapsulates a helical cooling channel. The rapid stiffness change in the FRVST, composed of a nontoxic shape memory polymer, is achieved by an active cooling system that pumps water through the helical channel. The FRVST displays a 66 times stiffness change and a 26 times transition enhancement compare with the noncooled version. The catheter allows for selective bending of each segment up to 127° in air and up to 76° in water under an 80 mT external magnetic field. The inner working channel can be used for cooling an ablation tip during a procedure and for information exchange via the deployment of wires or surgical tools.

In recent years, there has been a growing interest in the development of universal soft grippers that can handle objects of varying form factors (including flat objects), surface conditions (including moistened or oily objects), and mechanical properties (deformable and fragile). Yet, there is no single gripper that can gently grip objects with such a wide range of properties. Herein, a soft gripper that combines granular jamming (GJ) and electroadhesion (EA) to gently grasp and release a large set of diverse objects is presented. The gripper can operate in GJ mode only, in EA mode only, or in a combination mode that simultaneously activates GJ and EA. In GJ mode, the gripper can grasp objects with different surface properties, lift objects 38 times its own weight using negative pressure, and release objects by applying positive pressure, but has difficulty in handling flat and fragile objects. In EA mode, the gripper can manipulate flat and fragile objects but encounters difficulties with different surface properties such as oily or moisture. In the combination mode, the gripper can generate grasping forces up to 35% higher than in the GJ mode for all object sizes and certain shapes such as a cylinder. An interactive preprint version of the article can be found here: https://doi.org/10.22541/au.166937296.61200374/v1.

In recent years, there has been a growing interest in the development of universal soft grippers that can handle objects of varying form factors (including flat objects), surface condition (including moistened or oily objects), and mechanical properties (deformable and fragile). Yet, there is no single gripper that can gently grip objects with such a wide range of properties. In this paper, we present a soft gripper that combines granular jamming (GJ) and electroadhesion (EA) to gently grasp and release a large set of diverse objects. The gripper can operate in GJ mode only, in EA mode only, or in a combination mode that simultaneously activates GJ and EA. In GJ mode, the gripper can grasp objects with different surface properties, lift objects 38 times its own weight using negative pressure, and release objects by applying positive pressure, but has difficulty in handling flat and fragile objects. In EA mode, the gripper can manipulate flat and fragile objects but encounters difficulties with different surface properties such as oily or moistened. In the combination mode, the gripper can generates grasping forces up to 35% higher than in the GJ mode for all object sizes and certain shapes such as a cylinder.IntroductionThe softness of the human hand is a critical factor that allows us to hold, lift, and manipulate a variety of objects and has inspired roboticists to incorporate softness in gripper design and materials. The compliance of soft materials enables passive adaptation of the gripper during grasping operations allowing manipulation of a wide range of objects without bringing additional control complexities.[1,2] In recent years, there has been a growing interest in the development of universal soft grippers that can work with objects of different form factors, rigidity, surface properties, and level of fragility.[3–6] A possible approach to create such highly versatile grippers is to combine different gripping technologies that complement their individual limitations.[1,3,7–10] Yet, it is still challenging to develop a single gripper that can grasp and release objects of different form factor including flat objects, surface conditions (wet, porous, oily, and powdered), and mechanical properties (fragile and deformable).In this paper, we present a soft gripper capable of manipulating different objects with varying physical properties, such as shape, surface conditions, and rigidity. The proposed gripper combines two different technologies: granular jamming to control stiffness and electroadhesion to control adhesion. Here we show that not only does this combination mutually compensate for the limitations of each individual technology, but it also makes the gripper capable of performing multi-stage grasping tasks that consist of diverse grasping and releasing operations on objects made of different material, surface, and shape. The manipulation of a book is an example of multi-stage operation that requires grasping and turning a rigid cover and flipping through single pages.Granular jamming (GJ) enables reversible stiffness change between soft and rigid configurations by means of negative pressure[5,11,12]. High compliance in the soft state allows a GJ gripper to envelope the manipulated object by pressing on it. When negative pressure is applied, the gripper becomes stiff and holds the encaged object.[2] Variable stiffness can also be achieved by integrating phase-change materials that vary mechanical properties under thermal stimulation.[7,13] However, granular jamming offers comparatively faster response time (~100ms), independence from environmental temperature, higher lifting force, easier fabrication, higher robustness, and lower cost.[2,5,14,15] The grasping force produced by granular jamming is sufficient to grasp objects of different morphologies, almost independently of the surface conditions of the object.[5,11,16] The grasping force of GJ grippers can vary from 0.09 to 1.2 kN.[12] GJ has been combined with soft pneumatic actuators to provide more dexterous grasp and lift heavier objects because of the enhanced holding forces.[10,17] However, GJ grippers cannot lift flat objects, such as a sheet of paper. Also, the grasping performance of delicate, fragile and easily deformable objects such as a thin layer of cloth, an egg, or water balloons, as well as larger objects than the active area of the granular bag can be challenging and have not been demonstrated so far.Electroadhesion (EA) instead is an adhesive technology that leverages the shear force generated by electrostatic forces.[18] Electroadhesive pads have been combined with different actuation technologies, such as dielectric elastomer actuation,[1] soft pneumatic actuation,[19] layer jamming,[20] and Fin-Ray structured actuation[21]. The enhanced shear force makes EA-based grippers capable of delicately grasping both flat and fragile objects without squeezing or breaking them.[1,22–26] While the adhesive force of EA pads can be tuned by regulating electrical input, EA effectiveness is highly dependent on the environmental and surface conditions of the object being grasped.[18] In particular electroadhesion is less effective for objects that are greasy, rough, or wet.[2] An additional challenge of soft grippers that rely on electroadhesion is the residual electrostatic charge that remains for a few seconds after removing the voltage and can result in difficult release of light objects.[27]

Pressure‐sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA's peeling, shear, and tack properties for every specific case. ‘Very High Bond’ (VHB) is a widely used PSA because of its high compliance suitable for stretchable and soft‐matter devices. In this study, a simple and fast surface treatment approach to modify the adhesion of VHB by CO₂ laser engraving is reported. We characterized this surface treatment method for VHB with different substrates. Multiple laser settings were tested for each material combination to determine the conditions at which the surface adhesion would be the highest. Tests on mechanical properties, ablation directions, chemical composition, tackiness, surface viscosity, and peeling forces were conducted to understand the adhesion and viscoelasticity changes. A higher concentration of non‐crosslinked materials was determined in the VHB structure after treatment than before. Thus, we reason that laser treatment changes the surface adhesion of the PSA by cleavage of the polymer network. This work provides a simple route for tuning peeling, shear, and tack forces of a popular VHB using common equipment.

Variable stiffness (VS) is an important feature that significantly enhances the dexterity of magnetic catheters used in minimally invasive surgeries. Existing magnetic catheters with VS consist of sensors, heaters, and tubular structures filled with low melting point alloys, which have a large stiffness change ratio but are toxic to humans. In this paper, a VS magnetic catheter is described for minimally invasive surgery; the catheter is based on a novel variable stiffness thread (VST), which is made of a conductive shape memory polymer (CSMP). The CSMP is nontoxic and simultaneously serves as a heater, a temperature sensor, and a VS substrate. The VST is made through a new scalable fabrication process, which consists of a dipping technique that enables the fabrication of threads with the desired electrical resistance and thickness (with a step size of 70 µm). Selective bending of a multisegmented VST catheter with a diameter of 2.0 mm under an external magnetic field of 20 mT is demonstrated. Compared to existing proof‐of‐concept VS catheters for cardiac ablation, each integrated VST segment has the lowest wall thickness of 0.75 mm and an outer diameter of 2.0 mm. The segment bends up to 51° and exhibits a stiffness change factor of 21.

The inherent compliance of soft robots often makes it difficult for them to exert forces on surrounding surfaces or withstand mechanical loading. Controlled stiffness is a solution to empower soft robots with the ability to apply large forces on their environments and sustain external loads without deformations. Herein, a compact, soft actuator composed of a shared electrode used for both electrostatic actuation and variable stiffness is described. The device operates as a dielectric elastomer actuator, while variable stiffness is provided by a shared electrode made of gallium. The fabricated actuator, namely variable stiffness dielectric elastomer actuator (VSDEA), has a compact and lightweight structure with a thickness of 930 μm and a mass of 0.7 g. It exhibits a stiffness change of 183×, a bending angle of 31°, and a blocked force of 0.65 mN. Thanks to the lightweight feature, the stiffness change per mass of the actuator (261× g⁻¹) is 2.6 times higher than that of the other type of VSDEA that has no shared electrode.