Jiwei Luo

Compared with single or twin tunnels, the pressure arch effect of deeply buried, symmetrically distributed triple tunnels are more complex and less studied. In this paper, the arching responses are in-situ measured in the deeply buried, symmetrically distributed triple tunnels of Badaling Great Wall station. Numerical research is subsequently conducted to investigate the formation and development of the pressure arch of triple tunnels. Then, the influencing law of buried depth on pressure arch behavior is systematically studied. Based on monitoring data, the rock pressure distribution is asymmetric about the axis of the triple tunnels, and the arching response of the middle tunnels is more significant than that of the left and right tunnels. According to numerical analysis, a combined large pressure arch may be easily formed across the triple tunnels. The pre-arching and double-arching effects are also numerically observed during triple tunnel excavations. The inner boundary of the pressure arch of the middle tunnel is 14.0 m, nearly two times higher than those of the left and right tunnels. This simulation result indicates that the mechanical state of the middle tunnel is the least desirable. Moreover, the critical arching depth of closely spaced tunnels is 1.75 times that of a single tunnel. Compared with a single tunnel, the support of triple tunnels should be additionally strengthened.

A super-span tunnel that has the characteristics of a large excavation area, a small high-span ratio and a significant spatial effect exhibits a complex mechanical response during the excavation process. In this paper, taking the Badaling Great Wall station in Beijing, China as the engineering background, a case study of field monitoring a super-span tunnel has been presented. A typical monitoring section was selected in the super-span transition section of the tunnel and the deformation and forces of both the surrounding rock and the support structures were systematically monitored. The dynamic evolution and the spatial distribution characteristics of the monitoring data, including the internal displacement of the surrounding rock, the tunnel displacement, the contact pressure between the surrounding rock and the primary supports, the contact pressure between the primary and secondary supports, the axial forces in the bolts and cables, the internal forces in both the steel arches and the secondary supports and the internal stresses of the surrounding rock, were analyzed. The results of the monitoring and the analyses have shown that the deformation and the forces acting on both the surrounding rock and the tunnel’s lining are directly related to the construction procedures, the geological conditions and the locations in the super-span tunnel. According to the results, a few suggestions to improve the construction of the tunnel have been proposed.