Satoru Egawa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Satoru Egawa has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Makina Yabashi
Japan Synchrotron Radiation Research Institute
7 shared publications - Hidekazu Mimura
The University of Tokyo
6 shared publications - Hiroto Motoyama
Research Center for Advanced Science and Technology, The University of Tokyo 2 , Meguro, Tokyo 153-8904
6 shared publications - Gota Yamaguchi
Riken SPring-8 Center, Sayo-cho, Japan
4 shared publications - Yoko Takeo
The University of Tokyo
4 shared publications Gota Yamaguchi
RIKEN SPring-8 Center
3 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Fabrication of ultrahigh precision master mandrel toward sub-10 arcsec x-ray Wolter mirror for x-ray telescope
X-ray telescopes with sub-10-arcsec angular resolution are required for detailed observations of high temperature celestial objects and high-energy phenomena in space. The angular resolution of an x-ray telescope depends on the figure accuracy of focusing optics, such as Wolter mirrors. In this research, a master mandrel was corrected to improve the figure accuracy of a Wolter mirror fabricated from the mandrel by nickel electroforming process. A nozzle-type elastic emission machining system was developed and applied to the figure correction over a limited area of the mandrel (110 mm in the longitudinal direction, 10° in the circumferential direction). The longitudinal figure accuracy of the mandrel was improved from 15–20 nm to ∼3 nm in Root Mean Square (RMS) value. A surface profiler system was developed to evaluate the longitudinal figure accuracy of Wolter mirrors. The measurement repeatability was 0.8 nm (RMS), which is sufficient for the evaluation of the figure accuracy. The figure accuracy of the Wolter mirror in the corrected area was evaluated to be 9.8 nm (RMS), and the slope error was 6.2 μrad (RMS). The imaging performance of a 2° azimuthal range in the corrected area of the Wolter mirror was evaluated by an x-ray focusing experiment at the 1-km beamline of BL29XU at SPring-8. The angular resolution was 4.3 ± 0.3 arcsec in half power diameter, which agreed with the angular resolution evaluated by ray-tracing simulation with the figure profile of the Wolter mirror evaluated by the developed surface profiler system. This agreement demonstrates that the developed surface profiler accurately measures the figure errors that affect the optical performance of the Wolter mirror.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Fabrication of ultrahigh precision master mandrel toward sub-10 arcsec x-ray Wolter mirror for x-ray telescope
X-ray telescopes with sub-10-arcsec angular resolution are required for detailed observations of high temperature celestial objects and high-energy phenomena in space. The angular resolution of an x-ray telescope depends on the figure accuracy of focusing optics, such as Wolter mirrors. In this research, a master mandrel was corrected to improve the figure accuracy of a Wolter mirror fabricated from the mandrel by nickel electroforming process. A nozzle-type elastic emission machining system was developed and applied to the figure correction over a limited area of the mandrel (110 mm in the longitudinal direction, 10° in the circumferential direction). The longitudinal figure accuracy of the mandrel was improved from 15–20 nm to ∼3 nm in Root Mean Square (RMS) value. A surface profiler system was developed to evaluate the longitudinal figure accuracy of Wolter mirrors. The measurement repeatability was 0.8 nm (RMS), which is sufficient for the evaluation of the figure accuracy. The figure accuracy of the Wolter mirror in the corrected area was evaluated to be 9.8 nm (RMS), and the slope error was 6.2 μrad (RMS). The imaging performance of a 2° azimuthal range in the corrected area of the Wolter mirror was evaluated by an x-ray focusing experiment at the 1-km beamline of BL29XU at SPring-8. The angular resolution was 4.3 ± 0.3 arcsec in half power diameter, which agreed with the angular resolution evaluated by ray-tracing simulation with the figure profile of the Wolter mirror evaluated by the developed surface profiler system. This agreement demonstrates that the developed surface profiler accurately measures the figure errors that affect the optical performance of the Wolter mirror.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
High-speed imaging of cutting and electrical discharge machining (EDM) in thin metals and fluids using high-intensity 100 keV x rays
Conventional machining methods, such as cutting and electrical discharge machining (EDM), have significantly contributed to the manufacturing industry for a long time. Despite their extensive development history, the underlying machining mechanisms remain unclear because direct observation of actual cutting and EDM processes inside metals and fluids has been impossible. In this study, we employed an intense, high-energy x-ray beam from an undulator source to visualize the motion of tools and the processing surfaces during cutting and EDM processes. The 100-keV x rays with a flux density of 1013 photons/mm2 enabled non-destructive observation inside metals at a high frame rate of 5000 fps. This study demonstrates that conventional metal machining processes, including interactions under fluids, the motion of tools, and the change of the processing surface during drilling and small-hole EDM, can be observed clearly. The developed x-ray imaging system can be applied to analyzing various actual machining phenomena in both traditional and non-traditional processes.
- 1 February 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (2)
High-speed imaging of cutting and electrical discharge machining (EDM) in thin metals and fluids using high-intensity 100 keV x rays
Conventional machining methods, such as cutting and electrical discharge machining (EDM), have significantly contributed to the manufacturing industry for a long time. Despite their extensive development history, the underlying machining mechanisms remain unclear because direct observation of actual cutting and EDM processes inside metals and fluids has been impossible. In this study, we employed an intense, high-energy x-ray beam from an undulator source to visualize the motion of tools and the processing surfaces during cutting and EDM processes. The 100-keV x rays with a flux density of 1013 photons/mm2 enabled non-destructive observation inside metals at a high frame rate of 5000 fps. This study demonstrates that conventional metal machining processes, including interactions under fluids, the motion of tools, and the change of the processing surface during drilling and small-hole EDM, can be observed clearly. The developed x-ray imaging system can be applied to analyzing various actual machining phenomena in both traditional and non-traditional processes.
- Open Access
- 27 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (4)
Chemical-state imaging of a mammalian cell through multi-elemental soft x-ray spectro-ptychography
Soft x-ray spectro-ptychography is a high-resolution chemical state imaging technique and has significant potential for the analysis of light-element-rich samples such as biological cells. We measured hyperspectral images of a whole mammalian neuronal cell at the nitrogen and oxygen absorption edges with soft x rays using the achromatic ptychography system CARROT developed at SPring-8 BL07LSU. We visualized and classified the intracellular structures based on the difference of chemical states, which are difficult to recognize in a monochromatic image. The method is expected to give insight into the relationship between intracellular structures and chemical states.
- 27 January 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (4)
Open AccessChemical-state imaging of a mammalian cell through multi-elemental soft x-ray spectro-ptychography
Soft x-ray spectro-ptychography is a high-resolution chemical state imaging technique and has significant potential for the analysis of light-element-rich samples such as biological cells. We measured hyperspectral images of a whole mammalian neuronal cell at the nitrogen and oxygen absorption edges with soft x rays using the achromatic ptychography system CARROT developed at SPring-8 BL07LSU. We visualized and classified the intracellular structures based on the difference of chemical states, which are difficult to recognize in a monochromatic image. The method is expected to give insight into the relationship between intracellular structures and chemical states.
- Open Access
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Study on chemical mechanism of processing silicon by PMMA in water
In a previous study, an eco-friendly planarization method for glass and silicon was proposed, utilizing the chemical properties of polymethyl methacrylate (PMMA) in water. Atomically flat, defect-free glass and silicon surfaces were observed using atomic force microscopy, indicating that the underlying processing phenomenon is based on chemical reactions. To date, PMMA remains the only material capable of achieving such surface flattening in water. Understanding the chemical processing mechanism is crucial for improving processing conditions and identifying other suitable polymer materials. In this study, ATR-FTIR spectroscopy and XPS were employed to analyze both the PMMA and the processed silicon surfaces. Based on various observations, we concluded that the O = C–O–C groups on the PMMA surface undergo hydrolysis during processing in water, leading to their rupture. This rupture creates active sites on the PMMA surface, which promote the formation of C–O–Si bonds between the PMMA and the silicon surface, facilitating the removal of silicon atoms.
- 7 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (1)
Open AccessStudy on chemical mechanism of processing silicon by PMMA in water
In a previous study, an eco-friendly planarization method for glass and silicon was proposed, utilizing the chemical properties of polymethyl methacrylate (PMMA) in water. Atomically flat, defect-free glass and silicon surfaces were observed using atomic force microscopy, indicating that the underlying processing phenomenon is based on chemical reactions. To date, PMMA remains the only material capable of achieving such surface flattening in water. Understanding the chemical processing mechanism is crucial for improving processing conditions and identifying other suitable polymer materials. In this study, ATR-FTIR spectroscopy and XPS were employed to analyze both the PMMA and the processed silicon surfaces. Based on various observations, we concluded that the O = C–O–C groups on the PMMA surface undergo hydrolysis during processing in water, leading to their rupture. This rupture creates active sites on the PMMA surface, which promote the formation of C–O–Si bonds between the PMMA and the silicon surface, facilitating the removal of silicon atoms.
- 21 May 2024
- Published by Optica Publishing Group in Optica
- Vol. 11 (6) , 736-743
Observation of mammalian living cells with femtosecond single pulse illumination generated by a soft X-ray free electron laser
Soft X-ray transmission microscopy is a powerful tool for visualizing cellular structures due to the natural contrast between organic material and water, but radiation damage has hindered its application to living cells. We have developed a soft X-ray microscope using femtosecond pulse illumination generated by a soft X-ray free electron laser, with which structural change of cells caused by radiation damage is negligible. Employing Wolter mirrors for illumination and objective optics allowed us to perform soft X-ray imaging with a large field of view, enabling observation of mammalian cells. We successfully captured images of living cells in a culture medium visualizing their carbon distribution. The broad wavelength-tunability of soft X-ray free electron lasers, in conjunction with the achromaticity of Wolter mirrors, enabled wavelength resolved cellular imaging.
- 21 May 2024
- Published by Optica Publishing Group in Optica
- Vol. 11 (6) , 736-743
Observation of mammalian living cells with femtosecond single pulse illumination generated by a soft X-ray free electron laser
Soft X-ray transmission microscopy is a powerful tool for visualizing cellular structures due to the natural contrast between organic material and water, but radiation damage has hindered its application to living cells. We have developed a soft X-ray microscope using femtosecond pulse illumination generated by a soft X-ray free electron laser, with which structural change of cells caused by radiation damage is negligible. Employing Wolter mirrors for illumination and objective optics allowed us to perform soft X-ray imaging with a large field of view, enabling observation of mammalian cells. We successfully captured images of living cells in a culture medium visualizing their carbon distribution. The broad wavelength-tunability of soft X-ray free electron lasers, in conjunction with the achromaticity of Wolter mirrors, enabled wavelength resolved cellular imaging.
- Open Access
- 4 December 2023
- Published by Springer Nature in Research Square
Observation of mammalian living cells with femtosecond single pulse illumination generated by a soft X-ray free electron laser
Soft X-ray transmission microscopy is a powerful tool for visualizing cellular structures due to the natural contrast between organic material and water, but radiation damage has hindered its application to living cells. We have developed a soft X-ray microscope using femtosecond pulse illumination generated by a soft X-ray free electron laser, with which structural change of cells caused by radiation damage is negligible. Employing Wolter mirrors for illumination and objective optics enabled us to perform soft X-ray imaging with a large field of view, facilitating observation of mammalian cells. We successfully captured images of living cells in culture medium visualizing their carbon distribution. The broad wavelength-tunability of soft X-ray free electron lasers, in conjunction with the achromaticity of Wolter mirrors, enabled wavelength resolved cellular imaging.
- 4 December 2023
- Published by Springer Nature in Research Square
Open AccessObservation of mammalian living cells with femtosecond single pulse illumination generated by a soft X-ray free electron laser
Soft X-ray transmission microscopy is a powerful tool for visualizing cellular structures due to the natural contrast between organic material and water, but radiation damage has hindered its application to living cells. We have developed a soft X-ray microscope using femtosecond pulse illumination generated by a soft X-ray free electron laser, with which structural change of cells caused by radiation damage is negligible. Employing Wolter mirrors for illumination and objective optics enabled us to perform soft X-ray imaging with a large field of view, facilitating observation of mammalian cells. We successfully captured images of living cells in culture medium visualizing their carbon distribution. The broad wavelength-tunability of soft X-ray free electron lasers, in conjunction with the achromaticity of Wolter mirrors, enabled wavelength resolved cellular imaging.
- Open Access
- 1 May 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (5)
Figure correction of a Wolter mirror master mandrel by organic abrasive machining
In this study, figure correction of a master mandrel of a Wolter mirror by organic abrasive machining (OAM) was demonstrated. In OAM, a flow of slurry, dispersed with organic particles, locally removes the surface of a workpiece in contact with a rotating machining tool. A computer-controlled machining system was used to perform the selective removal of a fused silica surface at a spatial resolution of 200 µm. A master mandrel of a Wolter mirror for soft x-ray microscopes was fabricated with a figure accuracy of <1 nm root mean square, which is sufficient for diffraction-limited imaging at a wavelength of 10 nm.
- 1 May 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (5)
Open AccessFigure correction of a Wolter mirror master mandrel by organic abrasive machining
In this study, figure correction of a master mandrel of a Wolter mirror by organic abrasive machining (OAM) was demonstrated. In OAM, a flow of slurry, dispersed with organic particles, locally removes the surface of a workpiece in contact with a rotating machining tool. A computer-controlled machining system was used to perform the selective removal of a fused silica surface at a spatial resolution of 200 µm. A master mandrel of a Wolter mirror for soft x-ray microscopes was fabricated with a figure accuracy of <1 nm root mean square, which is sufficient for diffraction-limited imaging at a wavelength of 10 nm.
- 1 December 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (12) , 123106
Copper electroforming replication process for soft x-ray mirrors
We developed a copper electroforming replication (CER) process to fabricate precise ellipsoidal mirrors for soft x-ray focusing. Some applications of ellipsoidal mirrors in x-ray microscopy require that all components that are close to samples, including the mirrors, are made of non-magnetic materials. In this study, a non-magnetic copper ellipsoidal mirror was fabricated by replicating a figured and super-polished quartz glass mandrel using an electroforming technique. It was found that the CER process has a high replication accuracy of 8 nm. The focusing performance of the mirror was characterized using a soft x-ray free-electron laser with a photon energy of 100 eV. A small focus size of 370 × 400 nm2 was achieved with a high reflectivity of 65%.
- 1 December 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (12) , 123106
Copper electroforming replication process for soft x-ray mirrors
We developed a copper electroforming replication (CER) process to fabricate precise ellipsoidal mirrors for soft x-ray focusing. Some applications of ellipsoidal mirrors in x-ray microscopy require that all components that are close to samples, including the mirrors, are made of non-magnetic materials. In this study, a non-magnetic copper ellipsoidal mirror was fabricated by replicating a figured and super-polished quartz glass mandrel using an electroforming technique. It was found that the CER process has a high replication accuracy of 8 nm. The focusing performance of the mirror was characterized using a soft x-ray free-electron laser with a photon energy of 100 eV. A small focus size of 370 × 400 nm2 was achieved with a high reflectivity of 65%.
- 27 July 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (4) , 042405
Scanning magneto-optical Kerr effect (MOKE) measurement with element-selectivity by using a soft x-ray free-electron laser and an ellipsoidal mirror
The scanning magneto-optical Kerr effect (MOKE) method was developed by using a soft x-ray free-electron laser to visualize magnetic microstructures with element-selectivity. For focusing optics of soft x-rays, an ellipsoidal mirror with an achromatic property was utilized to obtain resonant MOKE spectra for various elements with a simple experimental setup. We performed a scanning MOKE experiment at Fe M-edge with a spatial resolution of 7 μm. This system is readily applicable to ultrafast MOKE experiments combined with a synchronized optical laser for spintronics research.
- 27 July 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 117 (4) , 042405
Scanning magneto-optical Kerr effect (MOKE) measurement with element-selectivity by using a soft x-ray free-electron laser and an ellipsoidal mirror
The scanning magneto-optical Kerr effect (MOKE) method was developed by using a soft x-ray free-electron laser to visualize magnetic microstructures with element-selectivity. For focusing optics of soft x-rays, an ellipsoidal mirror with an achromatic property was utilized to obtain resonant MOKE spectra for various elements with a simple experimental setup. We performed a scanning MOKE experiment at Fe M-edge with a spatial resolution of 7 μm. This system is readily applicable to ultrafast MOKE experiments combined with a synchronized optical laser for spintronics research.