Roman V. Kurtenkov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Roman V. Kurtenkov has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Vyacheslav Nikolayevich Brichkin
St. Petersburg Mining University
3 shared publications - R. I. Maksimova2 shared publications
- Alexey I. Alexeev
Bergbau-Universität St. Petersburg Institut für Technische Chemie V.O. Straße 21 199106 St. Petersburg Russland
1 shared publication - Amr Basuony ElDeeb
Mining and Petroleum Department, Faculty of Engineering, Al-Azhar University, Cairo 11884, Egypt
1 shared publication - I. S. Bormotov1 shared publication
- Nikita A. Gordevnin
Saint Petersburg Mining University, Saint Petersburg, Russian Federation
1 shared publication
Latest Publications
- 4 November 2026
- Published by Springer Nature in Metallurgist
- p. 1-11
Microalloying of steels with rare-earth metal master alloys
- 4 November 2026
- Published by Springer Nature in Metallurgist
- p. 1-11
Microalloying of steels with rare-earth metal master alloys
- 30 June 2025
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 1,p. 10-17
Synthesis, properties and applications of complex calcium aluminates and hydroaluminates
Modern technologies for the processing of aluminium-containing raw materials invariably pose questions regarding the composition and properties of complex calcium aluminates, the practical significance of which not only remains within the existing technological processes for producing binding compositions, but also develops inconnection with the complex processing of aluminosilicate raw materials and the potential for their individual synthesis for obtaining new types of by-products. In this connection the task of the performed research was to determine the composition and properties of calcium hydrocarboaluminate (CHCA) during its obtaining using alumina production solutions, depending on the nature of the alkali metal cation in the Na2O(K2O) – CaO – Al2O3 – CO2 – H2O system. The performed works included the laboratory synthesis of calcium hydrocarboaluminates, in relation to the conditions of aluminosilicate raw materials processing by sintering. The obtained samples were subjected to a range of analytical methods, including differential thermal analysis, X-ray phase and X-ray fluorescence analysis, laser microanalysis and electron microscopy. Noticeable differences in the laboratory synthesis of CHCA based on sodium and potassium aluminate solutions in terms of the degree of conversion of calcium oxide into CHCA and its yield, the content of CHCA in the precipitate and its stoichiometry with CO2 saturation from 0.79 to 0.62 mol, respectively, and for the industrial sample 0.45 mol, as a result of changes in the physicochemical and technological conditions of synthesis, have been established. The efficacy of utilising a complex physicochemical analysis of calcium aluminates, predicated on the determination and consideration of the phase composition of the precipitate and the characteristic chemical alterations of the system during the interaction of the lime component with the aluminate solution, is demonstrated. This approach, based on the findings of chemical, X-ray phase and combined thermal analysis, facilitates the determination of the material composition of multicomponent precipitates and the stoichiometry of CHCA. The present work was carried out with the support of the International Competence Centre for Mining Engineering Education under the auspices of UNESCO under the project “Science”, St. Petersburg, Russia.
- 30 June 2025
- Published by Ore and Metals Publishing House in Non-ferrous Metals
- No. 1,p. 10-17
Synthesis, properties and applications of complex calcium aluminates and hydroaluminates
Modern technologies for the processing of aluminium-containing raw materials invariably pose questions regarding the composition and properties of complex calcium aluminates, the practical significance of which not only remains within the existing technological processes for producing binding compositions, but also develops inconnection with the complex processing of aluminosilicate raw materials and the potential for their individual synthesis for obtaining new types of by-products. In this connection the task of the performed research was to determine the composition and properties of calcium hydrocarboaluminate (CHCA) during its obtaining using alumina production solutions, depending on the nature of the alkali metal cation in the Na2O(K2O) – CaO – Al2O3 – CO2 – H2O system. The performed works included the laboratory synthesis of calcium hydrocarboaluminates, in relation to the conditions of aluminosilicate raw materials processing by sintering. The obtained samples were subjected to a range of analytical methods, including differential thermal analysis, X-ray phase and X-ray fluorescence analysis, laser microanalysis and electron microscopy. Noticeable differences in the laboratory synthesis of CHCA based on sodium and potassium aluminate solutions in terms of the degree of conversion of calcium oxide into CHCA and its yield, the content of CHCA in the precipitate and its stoichiometry with CO2 saturation from 0.79 to 0.62 mol, respectively, and for the industrial sample 0.45 mol, as a result of changes in the physicochemical and technological conditions of synthesis, have been established. The efficacy of utilising a complex physicochemical analysis of calcium aluminates, predicated on the determination and consideration of the phase composition of the precipitate and the characteristic chemical alterations of the system during the interaction of the lime component with the aluminate solution, is demonstrated. This approach, based on the findings of chemical, X-ray phase and combined thermal analysis, facilitates the determination of the material composition of multicomponent precipitates and the stoichiometry of CHCA. The present work was carried out with the support of the International Competence Centre for Mining Engineering Education under the auspices of UNESCO under the project “Science”, St. Petersburg, Russia.
- 30 September 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 9,p. 15-22
Development of a method for producing hot reducing gas and blast furnace smelting technology therewith
The article is devoted to the topical topic of ferrous metals production, which is a continuation of many scientific works of the Department of Metallurgy, considering the possibility of developing energy-efficient and resource-saving technologies in the field of metallurgy of ferrous and non-ferrous metals, as well as issues of reducing the environmental burden on the environment. Based on the research performed, a method for carrying out blast furnace smelting with the injection of synthetic hot reducing gas (SHRG) obtained from blast furnace gas and non-scarce and relatively inexpensive coals was proposed. Joint injection of pulverized coal fuel (PCF) into the hearth in an amount of 120-138 kg/t of cast iron and hot gas with a flow rate of 300-550 m3/t of cast iron will reduce the consumption of skip coke to 288-322 kg/t of cast iron (by 17-36 %), consumption of equivalent fuel (ce) from scarce energy resources (coke + pulverized coal) will be 458-482 kg/t of cast iron. Increasing the consumption of injected hot water gas to 600-900 m3/t of cast iron reduces the consumption of skip coke to 350-388 kg/t of cast iron (68-105 kg/t of cast iron; 15-21 %) and the consumption of standard fuel from scarce energy carriers (coke) to 388 -426 kg/t of cast iron (154-191 kg/t of cast iron; 26-33 %), which corresponds to the best world analogues in the ironmaking. The use of SHG obtained from blast furnace gas as a reducing gas for the production of pig iron will significantly increase the performance of blast furnace smelting, reduce CO2 emissions into the atmosphere and improve the environmental situation in the metallurgical regions of the country.
- 30 September 2024
- Published by Ore and Metals Publishing House in Chernye Metally
- No. 9,p. 15-22
Development of a method for producing hot reducing gas and blast furnace smelting technology therewith
The article is devoted to the topical topic of ferrous metals production, which is a continuation of many scientific works of the Department of Metallurgy, considering the possibility of developing energy-efficient and resource-saving technologies in the field of metallurgy of ferrous and non-ferrous metals, as well as issues of reducing the environmental burden on the environment. Based on the research performed, a method for carrying out blast furnace smelting with the injection of synthetic hot reducing gas (SHRG) obtained from blast furnace gas and non-scarce and relatively inexpensive coals was proposed. Joint injection of pulverized coal fuel (PCF) into the hearth in an amount of 120-138 kg/t of cast iron and hot gas with a flow rate of 300-550 m3/t of cast iron will reduce the consumption of skip coke to 288-322 kg/t of cast iron (by 17-36 %), consumption of equivalent fuel (ce) from scarce energy resources (coke + pulverized coal) will be 458-482 kg/t of cast iron. Increasing the consumption of injected hot water gas to 600-900 m3/t of cast iron reduces the consumption of skip coke to 350-388 kg/t of cast iron (68-105 kg/t of cast iron; 15-21 %) and the consumption of standard fuel from scarce energy carriers (coke) to 388 -426 kg/t of cast iron (154-191 kg/t of cast iron; 26-33 %), which corresponds to the best world analogues in the ironmaking. The use of SHG obtained from blast furnace gas as a reducing gas for the production of pig iron will significantly increase the performance of blast furnace smelting, reduce CO2 emissions into the atmosphere and improve the environmental situation in the metallurgical regions of the country.
- 30 September 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 4,p. 32-38
Regeneration and recycling of lime component in complex processing of kaolin raw materials
Technological independence of the Russian aluminum industry has historically been constrained by compromises related to the domestic raw material base, which suffers from a shortage of high-quality bauxite and a reliance on low-quality aluminum raw materials. Several key issues remain to this day. One major ongoing challenge is improving the utilization efficiency of waste sludge, a by-product of alumina production generated during the processing of both traditional and low-quality aluminum raw materials. An advanced strategy for the utilization of silicate-calcium sludge from alumina production has been developed and implemented. This strategy specifically applies to processing nepheline-based raw materials and enables the production of a variety of by-products. There are, however, certain economic limitations that impact the production and market demand for these by-products. These financial constraints necessitate the development and optimization of technologies that can effectively regenerate and recycle the lime component present in the silicatecalcium sludge with the goal to facilitate the processing of different types of aluminosilicate raw materials. Relevant thermodynamic calculations indicate that carbon dioxide conversion of calcium orthosilicate is possible under atmospheric conditions, resulting in the release of lime and silicate components, regardless of the specific polymorphic modifications of orthosilicate and calcium carbonate involved. It has been established that calcium orthosilicate tends to become passivated by the products of chemical interactions. However, conditions for the conversion of γ-2CaO·SiO2, leading to the formation of aragonite and observed during the processing of kaolinite raw materials, have been shown to be more favorable. The study theoretically substantiates and experimentally confirms the influence of the degree of carbon dioxide conversion of calcium orthosilicate on the formulation of a two-component raw Portland cement mixture. It also demonstrates the potential for a significant reduction (up to 6.6 %) in the proportion of the sludge flow required to regenerate the lime component.
- 30 September 2024
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- No. 4,p. 32-38
Regeneration and recycling of lime component in complex processing of kaolin raw materials
Technological independence of the Russian aluminum industry has historically been constrained by compromises related to the domestic raw material base, which suffers from a shortage of high-quality bauxite and a reliance on low-quality aluminum raw materials. Several key issues remain to this day. One major ongoing challenge is improving the utilization efficiency of waste sludge, a by-product of alumina production generated during the processing of both traditional and low-quality aluminum raw materials. An advanced strategy for the utilization of silicate-calcium sludge from alumina production has been developed and implemented. This strategy specifically applies to processing nepheline-based raw materials and enables the production of a variety of by-products. There are, however, certain economic limitations that impact the production and market demand for these by-products. These financial constraints necessitate the development and optimization of technologies that can effectively regenerate and recycle the lime component present in the silicatecalcium sludge with the goal to facilitate the processing of different types of aluminosilicate raw materials. Relevant thermodynamic calculations indicate that carbon dioxide conversion of calcium orthosilicate is possible under atmospheric conditions, resulting in the release of lime and silicate components, regardless of the specific polymorphic modifications of orthosilicate and calcium carbonate involved. It has been established that calcium orthosilicate tends to become passivated by the products of chemical interactions. However, conditions for the conversion of γ-2CaO·SiO2, leading to the formation of aragonite and observed during the processing of kaolinite raw materials, have been shown to be more favorable. The study theoretically substantiates and experimentally confirms the influence of the degree of carbon dioxide conversion of calcium orthosilicate on the formulation of a two-component raw Portland cement mixture. It also demonstrates the potential for a significant reduction (up to 6.6 %) in the proportion of the sludge flow required to regenerate the lime component.
- 30 October 2020
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 35-40
Pit sump drainage thickening to remove saponite rock suspension
Advanced water supply systems for industrial enterprises represent complex facilities that include the supply of fresh water and its preparation for the process, treatment, decontamination and disposal of waste water, disposal of the resulting residue, and often the organization of a closed water cycle. Designing and operating such facilities is a complex technical and environmental task, which must be solved using the best available technologies. The management system for the drainage waters generated in diamond mining at the Lomonosov GOK of PJSC Severalmaz in the Arkhangelsk Region is a typical example. The precipitation indicators for the suspension in the drainage water were established using the traditional coagulants of aluminum sulfate and hydroxochloride, as well as an experimental sample of a calcium-aluminosilicate inorganic precipitator. The results of experiments with different coagulant dosages were used to establish the average and effective precipitation rate, the residual aluminum content in the water, acidity and turbidity of the clarified drainage water. The results obtained allow substantiating the higher efficiency of the experimental coagulant in terms of the water clarification rate and the possibility of meeting the sanitary standards for water discharge into natural water bodies envisaged by SanPiN 2.1.5.980-00. The work was carried out with the financial support of the Russian Science Foundation under Agreement No. 18-19-00577 dated April 26, 2018, on the provision of a grant for fundamental and exploratory research.
- 30 October 2020
- Published by Ore and Metals Publishing House in Obogashchenie Rud
- p. 35-40
Pit sump drainage thickening to remove saponite rock suspension
Advanced water supply systems for industrial enterprises represent complex facilities that include the supply of fresh water and its preparation for the process, treatment, decontamination and disposal of waste water, disposal of the resulting residue, and often the organization of a closed water cycle. Designing and operating such facilities is a complex technical and environmental task, which must be solved using the best available technologies. The management system for the drainage waters generated in diamond mining at the Lomonosov GOK of PJSC Severalmaz in the Arkhangelsk Region is a typical example. The precipitation indicators for the suspension in the drainage water were established using the traditional coagulants of aluminum sulfate and hydroxochloride, as well as an experimental sample of a calcium-aluminosilicate inorganic precipitator. The results of experiments with different coagulant dosages were used to establish the average and effective precipitation rate, the residual aluminum content in the water, acidity and turbidity of the clarified drainage water. The results obtained allow substantiating the higher efficiency of the experimental coagulant in terms of the water clarification rate and the possibility of meeting the sanitary standards for water discharge into natural water bodies envisaged by SanPiN 2.1.5.980-00. The work was carried out with the financial support of the Russian Science Foundation under Agreement No. 18-19-00577 dated April 26, 2018, on the provision of a grant for fundamental and exploratory research.
- 27 July 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 18-25
The activating effect of carbon during sintering the limestone-kaolin mixture
The results of studying the activating effect of carbon on the sintering performance of two-component limestone-kaolin mixture and subsequent hydrometallurgical processing of sinter are presented. Samples of charcoal and used anodes from aluminum electrolysis plants were added to the kaolin-limestone mixture in the range of 1–4% carbon of the charge mass. Briquetted mixtures were sintered in the established technological mode, with a constant heating and cooling rate of materials at an isothermal holding temperature in the range of 1250–1360 °С. The temperature of phase transformations and the values of thermal effects were estimated by using thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. The phase composition of the sinter was studied by X-ray diffraction analysis (XRD) and the particle size distribution of the sinter samples formed as a result of the self-disintegration process was studied by laser microanalysis. Sintered samples of the obtained particle size and without additional grinding were subjected to soda leaching under the same technological conditions in terms of temperature and process duration, initial concentration of solid in the pulp, composition and concentration of the solution. The sludges obtained from leaching the sinters were filtered and washed with distilled water then examined by (XRD) analysis to determine the phase composition and by X-ray fluorescence spectrometry (XRF) analysis to determine the chemical composition. Extraction of alumina into the solution was evaluated by the Al2O3 content in sinter and sludge. The results of experimental studies showed that the largest increase in the extraction of alumina from kaolin ore is more than 7% with a carbon content in the charge from 1.5 to 3.0%, depending on the nature of the carbon material. Further increase of the corresponding carbon additive in the charge causes a decrease in Al2O3 extraction, which is associated with the formation of hard-to-open mullite. At the same time, the activating role of the carbon additive has a thermodynamic energy and kinetic nature, which explains a more complete assimilation of lime with the formation of end products and a decrease in the metastable stability of the β-form C2S. The latter causes its accelerated transition to a thermodynamically stable γ-modification of C2S, increased self-disintegration of sinter, and noticeable amorphization of sintering products.Studies were conducted with the involvement of the laboratory base of the Center for Collective Use of the Mining University.The work was carried out with the financial support of the Russian Science Foundation under the Agreement No. 18-19-00577 of April 26 2018 of grant for fundamental scientific research and exploratory scientific research.
- 27 July 2020
- Published by Ore and Metals Publishing House in Tsvetnye Metally
- p. 18-25
The activating effect of carbon during sintering the limestone-kaolin mixture
The results of studying the activating effect of carbon on the sintering performance of two-component limestone-kaolin mixture and subsequent hydrometallurgical processing of sinter are presented. Samples of charcoal and used anodes from aluminum electrolysis plants were added to the kaolin-limestone mixture in the range of 1–4% carbon of the charge mass. Briquetted mixtures were sintered in the established technological mode, with a constant heating and cooling rate of materials at an isothermal holding temperature in the range of 1250–1360 °С. The temperature of phase transformations and the values of thermal effects were estimated by using thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. The phase composition of the sinter was studied by X-ray diffraction analysis (XRD) and the particle size distribution of the sinter samples formed as a result of the self-disintegration process was studied by laser microanalysis. Sintered samples of the obtained particle size and without additional grinding were subjected to soda leaching under the same technological conditions in terms of temperature and process duration, initial concentration of solid in the pulp, composition and concentration of the solution. The sludges obtained from leaching the sinters were filtered and washed with distilled water then examined by (XRD) analysis to determine the phase composition and by X-ray fluorescence spectrometry (XRF) analysis to determine the chemical composition. Extraction of alumina into the solution was evaluated by the Al2O3 content in sinter and sludge. The results of experimental studies showed that the largest increase in the extraction of alumina from kaolin ore is more than 7% with a carbon content in the charge from 1.5 to 3.0%, depending on the nature of the carbon material. Further increase of the corresponding carbon additive in the charge causes a decrease in Al2O3 extraction, which is associated with the formation of hard-to-open mullite. At the same time, the activating role of the carbon additive has a thermodynamic energy and kinetic nature, which explains a more complete assimilation of lime with the formation of end products and a decrease in the metastable stability of the β-form C2S. The latter causes its accelerated transition to a thermodynamically stable γ-modification of C2S, increased self-disintegration of sinter, and noticeable amorphization of sintering products.Studies were conducted with the involvement of the laboratory base of the Center for Collective Use of the Mining University.The work was carried out with the financial support of the Russian Science Foundation under the Agreement No. 18-19-00577 of April 26 2018 of grant for fundamental scientific research and exploratory scientific research.