Angel Negrete Velasco

Microplastics (MPs) have been observed in the oceans, fresh waters, karstic water and remote water bodies. However, little is known on groundwater contamination, which is a natural resource of utmost importance for millions of people and is often perceived as a reliable source of water. Moreover, nanofiltration is perceived as a reliable technology to remove contaminants from water. In this study, large sample volumes of a silty-sandy gravel aquifer and the corresponding nanofiltered water were analysed for the presence of MPs (> 20 µm) using Fourier transform infrared (FTIR) microscopy. Concentration in ground water was 8 ± 7 MPs/m³ and increased to 36 ± 11 MPs/m³ in nanofiltered water. All MPs had a maximum Ferret diameter lower than 500 µm. Size distribution of MPs was towards the small size class (20–50 µm). In groundwater, 33% of MPs were detected in the smallest size class (20–50 µm) and 67% in the 50–100-µm-size class. In comparison, around 52% of MPs in nanofiltered water were observed in the 20–50 µm size class. Moreover, 33% of the MPs observed in nanofiltered water were in the 50–100 µm size class and 15% in the 100–500-µm-size class. From a chemical point of view, different plastic polymers were identified in groundwater and in nanofiltered water, such as polypropylene (PP), polyvinyl chloride (PVC), ethylene (vinyl acetate) copolymer (EVA), polyethylene (PE), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) and other polymer materials (such as polystyrene-based copolymers, vinyl-based copolymers). Fibres were observed in all samples, but only a small number of fibres (near 1%) were identified as PP synthetic fibres in nanofiltered water. Furthermore, no clear difference of fibre concentrations was observed between groundwater (232 ± 127 fibres/m³) and nanofiltered water (247 ± 118 fibres/m³). Groundwater had extremely low levels of microplastics, and although the nanofiltration effectively removes suspended particulate matter, it slightly contaminates the filtered water with MPs.

Microplastics have been detected all around the globe in freshwaters which are frequently used to produce drinking water. Therefore, the contamination of raw water with microplastics that supplies drinking water treatment plants, and their removal efficiency is raising more concern and interest. In the present study, we evaluated the microplastic contamination in a conventional drinking water treatment plant (Geneva, Switzerland) and the contribution of coagulation on the efficiency of the filtration systems (sand and activated carbon filtrations) in the removal efficiency of microplastics (MPs) and synthetic fibres. This work was performed in a pilot station that replicates the main drinking water treatment process. Raw water and effluents of each filtering processes were analysed for the presence of MPs and synthetic fibres with sizes ≥ 63 μm using infrared spectroscopy. The contamination of MPs in raw water and in drinking water ranged from 19.5 to 143.5 MPs/m³ and from 0 to 8 MPs/m³ (in presence and absence of coagulant), respectively. On the other hand, concentration of synthetic fibres ranged from 7.7 to 23.8 synthetic fibres/m³ in raw water and from 0 to 3 synthetic fibres/m³ in drinking water. Results show that on average 89% of microplastics and 81% of synthetic fibres (≥63 μm) are retained in water treatment in absence of coagulant. Better final removal efficiency of microplastics (97%) and synthetic fibres (96%) was observed in drinking water with coagulation treatment. The chemical composition of microplastics and synthetic fibres is found more heterogeneous in raw water than after sand filtration and activated carbon filtration.

The contamination of aquatic environments by microplastics has been largely documented in the last years, especially in oceans, rivers, and lakes, but their occurrence in remote mountain lakes has been scarcely considered. This work aims to investigate the presence and abundance of microplastics and fibres in a remote, alpine, and uninhabited lake in Switzerland (Sassolo). In this study, the water column as well as the sediments were analysed. The isolation of microplastics and fibres from the samples of the sediment was achieved with a digestion process using H₂O₂ and a density separation technique with NaI. Classification of microparticles (from 5 mm to 125 μm) was first developed with an optical microscope. Infrared spectroscopy was then used to identify and characterize the chemical nature of the microplastics and fibres. On average, 2.6 microplastics and 4.4 fibres per litre were identified in the water column. On the other hand, the results of the sediment samples revealed significant fibre concentrations compared to plastic microparticles (514 fibres and 33 microplastics per kilogram). The most abundant types of microplastic identified in the samples were composed of polyethylene (PE) and polypropylene (PP). Microplastic and fibre sources were not determined, but it is likely that the number of human activities in this area as well as aerial deposition are contributing to contaminate this remote environment with microplastics and fibres.