Sergii Zhartovskyi
Research Subjects
Sergii Zhartovskyi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
A.N. Titenko
1 shared publication- Ievgen Tyshchenko
Educational and Methodological Centre of Civil Protection and Life Safety of Cherkasy Region
1 shared publication - Kostyantin Kaverin
Kyiv National University of Construction and Architecture
1 shared publication - Maryna Kravchenko
Київський національний університет будівництва і архітектури
1 shared publication - Natalia Lialina
Kyiv National University of Construction and Architecture
1 shared publication Oksana Kyrychenko
Cherkasy Institute of Fire Safety named after Chornobyl Heroes of National University of Civil Protection of Ukraine
1 shared publication
Latest Publications
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 62-70
Establishing fire protection patterns in wood using impregnation compositions from inorganic salts
An issue related to using inorganic salts for fire protection of wood is to ensure their flame-inhibiting ability and compatibility with wood and application technology. That is why the object of research was to establish the effectiveness of inhibitory properties of mixtures of inorganic salts during interaction with the flame and enabling interplay with wood. A synergistic increase in the inhibitory capacity of mixtures of aqueous solutions of salts of diammonium phosphate and ammonium sulfate at a ratio of 2:1, and for a mixture based on orthophosphoric acid, urea, and oxyethylidenediphosphonic acid in the concentration range of 20–25 % by mass, has been proven. During the interaction of the specified mixtures with the wood surface, it was found that after application to the wood surface, the dispersed component of the free energy of the wood surface decreased to zero; instead, the polar component increased 13 times, which indicates a change in the wood surface. During the tests of wood samples on the effect of the burner flame, it was found that the untreated sample ignited on second 53, and the flame spread throughout the sample for 102 s. On the other hand, the samples treated with a mixture of an aqueous solution of phosphate and ammonium sulfate, as well as a mixture of aqueous solutions based on orthophosphoric acid and urea and oxyethylidenediphosphonic acid, did not catch fire, the flame did not spread over the surface, and the flammability index was 0. The practical significance is that the results were taken into account when designing flame retardant compositions for wood. Thus, there are reasons to assert the possibility of targeted regulation of wood protection processes through the use of mixtures of inorganic salts capable of forming a protective layer on the surface of the material that inhibits the burning of wood
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 62-70
Open AccessEstablishing fire protection patterns in wood using impregnation compositions from inorganic salts
An issue related to using inorganic salts for fire protection of wood is to ensure their flame-inhibiting ability and compatibility with wood and application technology. That is why the object of research was to establish the effectiveness of inhibitory properties of mixtures of inorganic salts during interaction with the flame and enabling interplay with wood. A synergistic increase in the inhibitory capacity of mixtures of aqueous solutions of salts of diammonium phosphate and ammonium sulfate at a ratio of 2:1, and for a mixture based on orthophosphoric acid, urea, and oxyethylidenediphosphonic acid in the concentration range of 20–25 % by mass, has been proven. During the interaction of the specified mixtures with the wood surface, it was found that after application to the wood surface, the dispersed component of the free energy of the wood surface decreased to zero; instead, the polar component increased 13 times, which indicates a change in the wood surface. During the tests of wood samples on the effect of the burner flame, it was found that the untreated sample ignited on second 53, and the flame spread throughout the sample for 102 s. On the other hand, the samples treated with a mixture of an aqueous solution of phosphate and ammonium sulfate, as well as a mixture of aqueous solutions based on orthophosphoric acid and urea and oxyethylidenediphosphonic acid, did not catch fire, the flame did not spread over the surface, and the flammability index was 0. The practical significance is that the results were taken into account when designing flame retardant compositions for wood. Thus, there are reasons to assert the possibility of targeted regulation of wood protection processes through the use of mixtures of inorganic salts capable of forming a protective layer on the surface of the material that inhibits the burning of wood
- Open Access
- 23 February 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (10 (109)) , 45-52
Procedure for constructing a mathematical model to determine the time of the initial stage of fire evolution
To develop appropriate measures and means of fire protection at facilities, it is relevant to form an idea of the phenomenology of the processes of the occurrence, evolution, and termination of combustion. This paper proposes procedures for building mathematical models of the energy component of those physicochemical processes that occur in wood under the influence of fire, which make it possible to determine the time from the beginning of such an impact to the onset of the phase of flame combustion. The adequacy of mathematical modeling was tested experimentally at a standardized installation for studying flame propagation over the surface of wood. The samples used for the reported theoretical and experimental studies were the specimens of unprotected wood made from 20-mm-thick pine sapwood with a density of 400‒550 kg/m3. The samples of fireproof wood (of the same variety, thickness, and density) were impregnated with a fire retardant based on diammonium phosphate and ammonium sulfate (at consumption of 168.2 g/m2 of dry fire-retardant components). The modeling employed the results from the experimental determining of the ignition temperature of unprotected and fire-proof wood, specifically: 235 °C – for unprotected wood, 410 °C – for fire-proof wood, respectively. The results of mathematical modeling and experimental studies confirm the possibility of significant lengthening of time from the onset of fire exposure to the ignition of fire load from wood when nitrogen-phosphorus impregnating agents are used for fire protection. Procedures of mathematical modeling have been proposed to build models for determining the cooling effect from the use of impregnating fire retardants to protect the wood on the prolongation of the stage of a fire start. Mathematical modeling data could be applied when making impregnating fire retardants
- 23 February 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (10 (109)) , 45-52
Open AccessProcedure for constructing a mathematical model to determine the time of the initial stage of fire evolution
To develop appropriate measures and means of fire protection at facilities, it is relevant to form an idea of the phenomenology of the processes of the occurrence, evolution, and termination of combustion. This paper proposes procedures for building mathematical models of the energy component of those physicochemical processes that occur in wood under the influence of fire, which make it possible to determine the time from the beginning of such an impact to the onset of the phase of flame combustion. The adequacy of mathematical modeling was tested experimentally at a standardized installation for studying flame propagation over the surface of wood. The samples used for the reported theoretical and experimental studies were the specimens of unprotected wood made from 20-mm-thick pine sapwood with a density of 400‒550 kg/m3. The samples of fireproof wood (of the same variety, thickness, and density) were impregnated with a fire retardant based on diammonium phosphate and ammonium sulfate (at consumption of 168.2 g/m2 of dry fire-retardant components). The modeling employed the results from the experimental determining of the ignition temperature of unprotected and fire-proof wood, specifically: 235 °C – for unprotected wood, 410 °C – for fire-proof wood, respectively. The results of mathematical modeling and experimental studies confirm the possibility of significant lengthening of time from the onset of fire exposure to the ignition of fire load from wood when nitrogen-phosphorus impregnating agents are used for fire protection. Procedures of mathematical modeling have been proposed to build models for determining the cooling effect from the use of impregnating fire retardants to protect the wood on the prolongation of the stage of a fire start. Mathematical modeling data could be applied when making impregnating fire retardants
- 1 January 2020
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4,p. 124-129
Rationale of use of guanidine surfactants for fire extinguishing in natural ecosystems
Rationale of use of guanidine surfactants for fire extinguishing in natural ecosystems
- 1 January 2020
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4,p. 124-129
Rationale of use of guanidine surfactants for fire extinguishing in natural ecosystems
Rationale of use of guanidine surfactants for fire extinguishing in natural ecosystems
- Open Access
- 1 December 2016
- Published by CNBOP-PIB Centrum Naukowo-Badawcze Ochrony Przeciwpozarowej in Safety and Fire Technology
- No. 44,p. 131-137
Методика создания математической модели энергетической составляющей химико-физических процессов, которые происходят в древесине при ее нагревании до начала фазы пламенного горения
- 1 December 2016
- Published by CNBOP-PIB Centrum Naukowo-Badawcze Ochrony Przeciwpozarowej in Safety and Fire Technology
- No. 44,p. 131-137
Open AccessМетодика создания математической модели энергетической составляющей химико-физических процессов, которые происходят в древесине при ее нагревании до начала фазы пламенного горения