Natalia Lialina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Natalia Lialina has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Olga Bondarenko
Kyiv National University of Construction and Architecture
9 shared publications - Yuriy Tsapko
Kyiv National University of Construction and Architecture
8 shared publications - Kostyantin Kaverin
Kyiv National University of Construction and Architecture
5 shared publications - Alina Yushchenko
Київський національний університет будівництва і архітектури, м. Київ
4 shared publications - Аleksii Tsapko
Kyiv National University of Construction and Architecture
4 shared publications - Iryna Ohorodnik
Kyiv National University of Construction and Architecture
3 shared publications
Latest Publications
- Open Access
- 8 June 2026
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture in Economic scope
- No. 213,p. 254-260
STUDYING THE INFLUENCE OF SENSATION AS A MENTAL PROCESS ON THE FORMATION OF SENSORY MARKETING DIRECTIONS DURING THE WAR IN UKRAINE
The article studies the influence of sensation as a mental process on the formation of sensory marketing directions during the war in Ukraine. Research methods: comparative-analytical, generalization, systematic approach. It was found that sensory marketing is a complex structure, the individual components of which are visual, auditory, olfactory, tactile and taste marketing. In recent years, sensory marketing has been seen as a strategy that seeks, first, to connect the senses, and, second, to influence consumer perceptions, judgments, and behavior. Accordingly, the tasks of marketers are changing, as they begin to pay more attention to researching, understanding, and stimulating all five senses (sight, hearing, smell, taste, touch) of consumers and directly influencing sales, profits, and market share. With this approach, a brand can, for example, design packaging or interiors to evoke feelings of comfort, safety, or joy. The combination of several sensory channels (“multisensory marketing”) is effective, which creates a deeper emotional experience and increases consumer interest. But classic approaches to the use of sensory marketing change during extreme situations and crises. The effectiveness of each sensory channel can vary under the influence of war factors. It has been determined that during the war in Ukraine, sensory marketing began to focus on providing psychological comfort, security and stability, using familiar aromas, soothing sounds and tactile comfort to relieve anxiety. It acts as a coping mechanism, helping consumers cope with fear by creating a sensory-rich, calming environment that temporarily distracts from suffering and uncertainty. The main emphasis is on ethics, the rejection of aggressive stimuli, as well as visual and sound images that emphasize unity, resilience, and Ukrainian identity. The scientific novelty lies in the study of changes that consumers' sensory channels undergo during the war in Ukraine. The practical significance of the results is outlined by the prospects for their use in forming effective directions for the development of sensory marketing in war conditions.
- 8 June 2026
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture in Economic scope
- No. 213,p. 254-260
Open AccessSTUDYING THE INFLUENCE OF SENSATION AS A MENTAL PROCESS ON THE FORMATION OF SENSORY MARKETING DIRECTIONS DURING THE WAR IN UKRAINE
The article studies the influence of sensation as a mental process on the formation of sensory marketing directions during the war in Ukraine. Research methods: comparative-analytical, generalization, systematic approach. It was found that sensory marketing is a complex structure, the individual components of which are visual, auditory, olfactory, tactile and taste marketing. In recent years, sensory marketing has been seen as a strategy that seeks, first, to connect the senses, and, second, to influence consumer perceptions, judgments, and behavior. Accordingly, the tasks of marketers are changing, as they begin to pay more attention to researching, understanding, and stimulating all five senses (sight, hearing, smell, taste, touch) of consumers and directly influencing sales, profits, and market share. With this approach, a brand can, for example, design packaging or interiors to evoke feelings of comfort, safety, or joy. The combination of several sensory channels (“multisensory marketing”) is effective, which creates a deeper emotional experience and increases consumer interest. But classic approaches to the use of sensory marketing change during extreme situations and crises. The effectiveness of each sensory channel can vary under the influence of war factors. It has been determined that during the war in Ukraine, sensory marketing began to focus on providing psychological comfort, security and stability, using familiar aromas, soothing sounds and tactile comfort to relieve anxiety. It acts as a coping mechanism, helping consumers cope with fear by creating a sensory-rich, calming environment that temporarily distracts from suffering and uncertainty. The main emphasis is on ethics, the rejection of aggressive stimuli, as well as visual and sound images that emphasize unity, resilience, and Ukrainian identity. The scientific novelty lies in the study of changes that consumers' sensory channels undergo during the war in Ukraine. The practical significance of the results is outlined by the prospects for their use in forming effective directions for the development of sensory marketing in war conditions.
- Open Access
- 28 May 2026
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 82,p. 70-77
INNOVATIVE HEMP-BASED BUILDING MATERIALS: TECHNICAL PROPERTIES AND ECOLOGICAL POTENTIAL
The article explores the prospects for the use of building materials based on industrial hemp in the context of ensuring sustainable development of the construction industry. The relevance of the transition to the use of ecological materials is substantiated, taking into account the growing impact of construction on the environment, in particular through greenhouse gas emissions, resource depletion and waste generation. Particular attention is paid to the problem of embodied carbon and the need to take into account environmental, economic and social criteria at all stages of the life cycle of building materials. The paper provides a comparative analysis of the technical characteristics of materials based on hemp firewood with traditional building materials, in particular extruded polystyrene, chipboard, plasterboard, MDF and plywood. The experimental part included compression tests for thermal insulation materials and bending tests for boards in accordance with current standards. It was found that hemp-based insulation materials demonstrate higher compressive strength compared to extruded polystyrene, and board materials have mechanical characteristics comparable to chipboard. The results of the study confirm the feasibility of using hemp raw materials for the production of thermal insulation and board materials in construction. It was found that in terms of technical and environmental indicators, they can compete with traditional materials and be considered as an effective tool for decarbonization of the construction industry. Prospects for further research are related to improving production technologies, increasing the homogeneity of composites and scaling up their industrial application.
- 28 May 2026
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 82,p. 70-77
Open AccessINNOVATIVE HEMP-BASED BUILDING MATERIALS: TECHNICAL PROPERTIES AND ECOLOGICAL POTENTIAL
The article explores the prospects for the use of building materials based on industrial hemp in the context of ensuring sustainable development of the construction industry. The relevance of the transition to the use of ecological materials is substantiated, taking into account the growing impact of construction on the environment, in particular through greenhouse gas emissions, resource depletion and waste generation. Particular attention is paid to the problem of embodied carbon and the need to take into account environmental, economic and social criteria at all stages of the life cycle of building materials. The paper provides a comparative analysis of the technical characteristics of materials based on hemp firewood with traditional building materials, in particular extruded polystyrene, chipboard, plasterboard, MDF and plywood. The experimental part included compression tests for thermal insulation materials and bending tests for boards in accordance with current standards. It was found that hemp-based insulation materials demonstrate higher compressive strength compared to extruded polystyrene, and board materials have mechanical characteristics comparable to chipboard. The results of the study confirm the feasibility of using hemp raw materials for the production of thermal insulation and board materials in construction. It was found that in terms of technical and environmental indicators, they can compete with traditional materials and be considered as an effective tool for decarbonization of the construction industry. Prospects for further research are related to improving production technologies, increasing the homogeneity of composites and scaling up their industrial application.
- 30 March 2026
- Published by Publishing House Helvetica (Publications) in Economics and Management
- No. 1
MANAGEMENT OF THE CATEGORY OF CONSTRUCTION PRODUCTS BASED ON ARTIFICIAL INTELLIGENCE TECHNOLOGIES
Category management in modern conditions of digitalization is undergoing a profound transformation under the influence of the rapid development of artificial intelligence technologies, which necessitates a rethinking of traditional approaches to the formation of the assortment, management of product categories and making management decisions at the level of retail enterprises. The integration of artificial intelligence tools provides automation of key processes, in particular the analysis of large data sets, market segmentation and demand forecasting, which contributes to increasing the efficiency and rationalization of the activities of category managers. The use of machine learning algorithms and data analytics ensures the creation of adaptive models of consumer behavior that take into account dynamic changes in the market environment, allow for timely detection of trends and forecasting of market fluctuations, as well as promptly adjusting category management strategies. In addition, the use of intelligent algorithms opens up opportunities for the development of innovative strategies and marketing campaigns focused on a deeper understanding and satisfaction of consumer needs. The article carries out a comprehensive study of the features of the application of artificial intelligence technologies in the category management system of retail enterprises in building materials, taking into account industry specifics and factors influencing the market. The key factors of demand formation for construction products are identified, including price parameters, seasonality, income level of the population, intensity of construction activity and marketing influence, and an economic and mathematical model of sales forecasting based on multiple regression is developed, taking into account the relationship of key factors. A methodical approach to optimizing the assortment structure of the category is proposed by combining ABC-XYZ analysis with intelligent clustering algorithms. An assessment of the economic efficiency of implementing an intelligent category management system in a construction hypermarket is carried out. The results of the study confirm the feasibility of using artificial intelligence to increase forecasting accuracy, optimize inventories, reduce costs and increase the competitiveness of construction retail enterprises.
- 30 March 2026
- Published by Publishing House Helvetica (Publications) in Economics and Management
- No. 1
MANAGEMENT OF THE CATEGORY OF CONSTRUCTION PRODUCTS BASED ON ARTIFICIAL INTELLIGENCE TECHNOLOGIES
Category management in modern conditions of digitalization is undergoing a profound transformation under the influence of the rapid development of artificial intelligence technologies, which necessitates a rethinking of traditional approaches to the formation of the assortment, management of product categories and making management decisions at the level of retail enterprises. The integration of artificial intelligence tools provides automation of key processes, in particular the analysis of large data sets, market segmentation and demand forecasting, which contributes to increasing the efficiency and rationalization of the activities of category managers. The use of machine learning algorithms and data analytics ensures the creation of adaptive models of consumer behavior that take into account dynamic changes in the market environment, allow for timely detection of trends and forecasting of market fluctuations, as well as promptly adjusting category management strategies. In addition, the use of intelligent algorithms opens up opportunities for the development of innovative strategies and marketing campaigns focused on a deeper understanding and satisfaction of consumer needs. The article carries out a comprehensive study of the features of the application of artificial intelligence technologies in the category management system of retail enterprises in building materials, taking into account industry specifics and factors influencing the market. The key factors of demand formation for construction products are identified, including price parameters, seasonality, income level of the population, intensity of construction activity and marketing influence, and an economic and mathematical model of sales forecasting based on multiple regression is developed, taking into account the relationship of key factors. A methodical approach to optimizing the assortment structure of the category is proposed by combining ABC-XYZ analysis with intelligent clustering algorithms. An assessment of the economic efficiency of implementing an intelligent category management system in a construction hypermarket is carried out. The results of the study confirm the feasibility of using artificial intelligence to increase forecasting accuracy, optimize inventories, reduce costs and increase the competitiveness of construction retail enterprises.
- 30 August 2025
- Published by Drukarnia Madryd in Ukrainian Journal of Applied Economics and Technology
- Vol. 2025 (3) , 103-106
Wine cork as a specific identification criterion
The purpose of this research is to investigate the distinctive features of corks as a specific criterion for identifying grape wines in expert research on the quality of products supplied to Ukrainian consumers. The following methods were used during the work: analysis, synthesis, and generalization. It has been found that when identifying grape wines, corks, along with markings, are a crucial specific identification criterion. Cork preserves the quality of grape wines by protecting their multifaceted aroma, known as the “bouquet”. Cork production is evolving, and today there are different types of corks. For high-quality drinks, natural corks are mainly used. However, there is an alternative – collated, agglomerated, synthetic, and combined. They are inferior in quality to natural ones. However, they also have their advantages, particularly a wide range that distinguishes them, and they are cheaper and more readily available to various manufacturers. By analyzing the appearance of the cork, its shape, and the material from which it was made, information can be obtained about the properties of the cork, advantages and disadvantages of use, as well as to determine the quality of wine, which is determined by a specific raw material and production technology. A detailed analysis of the inscriptions and drawings on the cork provides additional information that allows us to make the conclusions obtained even more accurate and objective. When comparing the inscriptions on the cork and the label, please note their complete correspondence. The scientific novelty lies in the systematization of information on the classification of types of corks for grape wine available on the market and their identification features, which contribute to expert research on grape wines, particularly those imported. The practical significance is to provide the Ukrainian consumer with high-quality and safe grape wines and prevent counterfeit drinks from being sold. Knowledge of the main characteristics of corks for grape wines, including their external signs and properties, can be the key to more accurate and objective identification of the drink before conducting an examination of its quality according to a set of established indicators. Keywords: grape wines, identification, cork, labeling.
- 30 August 2025
- Published by Drukarnia Madryd in Ukrainian Journal of Applied Economics and Technology
- Vol. 2025 (3) , 103-106
Wine cork as a specific identification criterion
The purpose of this research is to investigate the distinctive features of corks as a specific criterion for identifying grape wines in expert research on the quality of products supplied to Ukrainian consumers. The following methods were used during the work: analysis, synthesis, and generalization. It has been found that when identifying grape wines, corks, along with markings, are a crucial specific identification criterion. Cork preserves the quality of grape wines by protecting their multifaceted aroma, known as the “bouquet”. Cork production is evolving, and today there are different types of corks. For high-quality drinks, natural corks are mainly used. However, there is an alternative – collated, agglomerated, synthetic, and combined. They are inferior in quality to natural ones. However, they also have their advantages, particularly a wide range that distinguishes them, and they are cheaper and more readily available to various manufacturers. By analyzing the appearance of the cork, its shape, and the material from which it was made, information can be obtained about the properties of the cork, advantages and disadvantages of use, as well as to determine the quality of wine, which is determined by a specific raw material and production technology. A detailed analysis of the inscriptions and drawings on the cork provides additional information that allows us to make the conclusions obtained even more accurate and objective. When comparing the inscriptions on the cork and the label, please note their complete correspondence. The scientific novelty lies in the systematization of information on the classification of types of corks for grape wine available on the market and their identification features, which contribute to expert research on grape wines, particularly those imported. The practical significance is to provide the Ukrainian consumer with high-quality and safe grape wines and prevent counterfeit drinks from being sold. Knowledge of the main characteristics of corks for grape wines, including their external signs and properties, can be the key to more accurate and objective identification of the drink before conducting an examination of its quality according to a set of established indicators. Keywords: grape wines, identification, cork, labeling.
- Open Access
- 28 March 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (55) , 113-125
Prospects for improving the color fastness of thermally modified wood
It is proved that the color of wood tends to darken due to changes in the chemical components of wood, such as the degradation of amorphous carbohydrates during heat treatment at high temperature. Exposure of wood to high temperatures for a certain period of time improves not only its dimensional stability and durability, but also gives it an attractive dark color. The use of heat treatment has significantly changed the values of the color parameters L*, a*, b* in the samples of thermally modified wood. The L* parameter on the end and stratum surfaces was significantly higher (72 for the end surface and 80 for the stratum) in the control samples. As a result of the heat treatment, the L* value decreased significantly at 160 °C, with a treatment duration of 10 hours, to 44 and 47, respectively. The duration of thermal modification has a significant impact on color darkening. We also investigated the effect of different types of paints and varnishes applied to the surfaces of the samples subjected to heat treatment at different temperatures on the color state. A significant darkening of the end surface of the samples thermally modified at 160 °C and at 190 °C for 1 hour during the oil-wax and azure finishes was observed. That is, the color of wood obtained at a low processing temperature can be increased by applying these protective substances and make the material more attractive. The following studies evaluated the color stability of thermally modified wood additionally treated with oil-wax and azure, as well as the adhesion of these protective substances to the surface under the influence of environmental factors. The influence of different types of protective substances on the color of the surface of heat-treated wood was determined. The application of oil-wax and azure to the surface of the samples also affected the darkening of their color. It can be said that heat-treated samples, whose structure has changed compared to conventional wood, show different interactions with the applied materials.
- 28 March 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (55) , 113-125
Open AccessProspects for improving the color fastness of thermally modified wood
It is proved that the color of wood tends to darken due to changes in the chemical components of wood, such as the degradation of amorphous carbohydrates during heat treatment at high temperature. Exposure of wood to high temperatures for a certain period of time improves not only its dimensional stability and durability, but also gives it an attractive dark color. The use of heat treatment has significantly changed the values of the color parameters L*, a*, b* in the samples of thermally modified wood. The L* parameter on the end and stratum surfaces was significantly higher (72 for the end surface and 80 for the stratum) in the control samples. As a result of the heat treatment, the L* value decreased significantly at 160 °C, with a treatment duration of 10 hours, to 44 and 47, respectively. The duration of thermal modification has a significant impact on color darkening. We also investigated the effect of different types of paints and varnishes applied to the surfaces of the samples subjected to heat treatment at different temperatures on the color state. A significant darkening of the end surface of the samples thermally modified at 160 °C and at 190 °C for 1 hour during the oil-wax and azure finishes was observed. That is, the color of wood obtained at a low processing temperature can be increased by applying these protective substances and make the material more attractive. The following studies evaluated the color stability of thermally modified wood additionally treated with oil-wax and azure, as well as the adhesion of these protective substances to the surface under the influence of environmental factors. The influence of different types of protective substances on the color of the surface of heat-treated wood was determined. The application of oil-wax and azure to the surface of the samples also affected the darkening of their color. It can be said that heat-treated samples, whose structure has changed compared to conventional wood, show different interactions with the applied materials.
- Open Access
- 28 March 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (55)
Veneration of thermomodified veneer for the protection of wood virobies type of curry
The analysis of the process of thermal modification of wood was carried out and it was found that the treatment causes chemical changes in the structures of wood components (lignin, cellulose and hemicellulose). It has been proven that the thermal modification process causes the decomposition of hemicelluloses and the amorphous part of cellulose, reduces water absorption, and reduces the amount of substances that are a breeding ground for fungi, which leads to increased durability. In addition, lignin and the resulting pseudolignin undergo polymerization and redistribution throughout the cell volume, giving the cell walls greater density, hardness, and increased hydrophobicity (water repellency), thereby reducing their ability to absorb moisture and swell. It was determined that the oak veneer samples gained the most moisture from the environment in the first two days. The weight of unmodified veneer increased by 0.06 g, and similar results were shown by veneer modified at lower temperatures. The thermally modified veneer at 250 °C for 20, 30 minutes and at 280 °C gained 2 times less weight in the first two days - 0.03 g. Over the next 11 days, the control samples gained another 0.09 g, slightly less for samples modified at 160 °C, and modified at 220 °C and above ‒ no more than 0.03 g. Experimentally, it was found that compared to unmodified veneer, which gained 22.41 % moisture in two weeks, veneer modified at 250 and 280 °C gained 2.5 times less moisture – an average of 8.6 %. It was found that as the modification temperature increases to 280 °C, water absorption decreases more than twice. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities.
- 28 March 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (55)
Open AccessVeneration of thermomodified veneer for the protection of wood virobies type of curry
The analysis of the process of thermal modification of wood was carried out and it was found that the treatment causes chemical changes in the structures of wood components (lignin, cellulose and hemicellulose). It has been proven that the thermal modification process causes the decomposition of hemicelluloses and the amorphous part of cellulose, reduces water absorption, and reduces the amount of substances that are a breeding ground for fungi, which leads to increased durability. In addition, lignin and the resulting pseudolignin undergo polymerization and redistribution throughout the cell volume, giving the cell walls greater density, hardness, and increased hydrophobicity (water repellency), thereby reducing their ability to absorb moisture and swell. It was determined that the oak veneer samples gained the most moisture from the environment in the first two days. The weight of unmodified veneer increased by 0.06 g, and similar results were shown by veneer modified at lower temperatures. The thermally modified veneer at 250 °C for 20, 30 minutes and at 280 °C gained 2 times less weight in the first two days - 0.03 g. Over the next 11 days, the control samples gained another 0.09 g, slightly less for samples modified at 160 °C, and modified at 220 °C and above ‒ no more than 0.03 g. Experimentally, it was found that compared to unmodified veneer, which gained 22.41 % moisture in two weeks, veneer modified at 250 and 280 °C gained 2.5 times less moisture – an average of 8.6 %. It was found that as the modification temperature increases to 280 °C, water absorption decreases more than twice. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities. The results of the research will also allow us to target further tasks to create new methods of thermal modification of wood and its operating conditions at various facilities.
- Open Access
- 30 December 2024
- Published by Kyiv National University of Construction and Architecture in Transfer of innovative technologies
- Vol. 7 (1) , 20-25
Effectiveness of fire protection of wood with an organic-mineral coating with the addition of aluminum hydroxide
Today, there are two methods of fire protection for wood. The first is impregnation with flame retardants, most often based on inorganic salts. When wood is moistened, fire retardants dissolve in a humid environment and gradually wash out to the surface, and then the fire retardant effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but penetrating deep into the wood structure and interacting with the cellulose, they reduce strength parameters. Therefore, it is not safe to use this product for critical load-bearing structures. The second method is to apply an organic or inorganic binder coating to the wood surface. Organic binder-based products have increased smoke generation and toxic substances, so their use is dangerous. Therefore, coatings capable of forming a heat-insulating layer on the surface of a building structure, which significantly reduces the processes of heat transfer to the material, have recently become widespread. As a result of the studies, it was found that the introduction of aluminium hydroxide into the composition of the organo-mineral coating in the amount of 2...8% reduces the swelling coefficient from 30 to 18 to a certain extent. However, for a coating containing 4%, an increase in the efficiency of fire protection of wood was found, namely a decrease in the loss of sample mass and flue gas temperature due to the formation of heat-resistant compounds on the surface of the fire protection layer when aluminium hydroxide interacts with ammonium polyphosphate. The use of aluminium hydroxide in the fireproofing composition provides the required level of protection of wood from thermal effects at the required amount of 4%, which leads to a reduction in cost and an increase in the efficiency of the coating. In further studies, it is planned to investigate other types of fillers, their properties and impact on the fire protection efficiency of wood in fireproof organic-mineral coatings.
- 30 December 2024
- Published by Kyiv National University of Construction and Architecture in Transfer of innovative technologies
- Vol. 7 (1) , 20-25
Open AccessEffectiveness of fire protection of wood with an organic-mineral coating with the addition of aluminum hydroxide
Today, there are two methods of fire protection for wood. The first is impregnation with flame retardants, most often based on inorganic salts. When wood is moistened, fire retardants dissolve in a humid environment and gradually wash out to the surface, and then the fire retardant effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but penetrating deep into the wood structure and interacting with the cellulose, they reduce strength parameters. Therefore, it is not safe to use this product for critical load-bearing structures. The second method is to apply an organic or inorganic binder coating to the wood surface. Organic binder-based products have increased smoke generation and toxic substances, so their use is dangerous. Therefore, coatings capable of forming a heat-insulating layer on the surface of a building structure, which significantly reduces the processes of heat transfer to the material, have recently become widespread. As a result of the studies, it was found that the introduction of aluminium hydroxide into the composition of the organo-mineral coating in the amount of 2...8% reduces the swelling coefficient from 30 to 18 to a certain extent. However, for a coating containing 4%, an increase in the efficiency of fire protection of wood was found, namely a decrease in the loss of sample mass and flue gas temperature due to the formation of heat-resistant compounds on the surface of the fire protection layer when aluminium hydroxide interacts with ammonium polyphosphate. The use of aluminium hydroxide in the fireproofing composition provides the required level of protection of wood from thermal effects at the required amount of 4%, which leads to a reduction in cost and an increase in the efficiency of the coating. In further studies, it is planned to investigate other types of fillers, their properties and impact on the fire protection efficiency of wood in fireproof organic-mineral coatings.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 128-138
Study of the effect of organic shell on the leaching of protective compositions from wood protected from fire
Today, there are various ways to fireproof wood. When wood is moistened, flame-retardants dissolve in a humid environment and gradually wash out to the surface, after which the fire protection effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but by penetrating deep into the wood structure and interacting with cellulose, they reduce strength characteristics. Another method is to apply a coating based on organic or inorganic binders to the wood surface. Products based on organic binders have increased smoke generation and toxic substances, so their use is dangerous. Therefore, an analysis of protective materials for wooden building structures was carried out and the need to develop reliable methods for studying the leaching of flame-retardants necessary for the creation of new types of fire protection materials was established. There is a need to determine the conditions for the formation of a barrier to the leaching of flame-retardants and to establish a mechanism for inhibiting the transfer of moisture to the material. In this regard, a mathematical model of the process of leaching protective substances from wood after its impregnation with flame-retardants when using a polymeric shell made of organic material as a coating was developed, which allows us to evaluate the effectiveness of the polymeric shell by the amount of water absorbed. The results of calculating the weight gain of the sample during exposure to water indicate an ambiguous effect of the nature of the protection on water absorption. In particular, this implies the availability of data sufficient for the qualitative process of inhibiting moisture diffusion and identifying, on its basis, the time point from which the decrease in coating efficiency begins. Thus, there is reason to believe that it is possible to regulate the processes of wood protection in a targeted manner by using polymer coatings that can form a protective layer on the surface of the material that inhibits the rate of water absorption.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (54) , 128-138
Open AccessStudy of the effect of organic shell on the leaching of protective compositions from wood protected from fire
Today, there are various ways to fireproof wood. When wood is moistened, flame-retardants dissolve in a humid environment and gradually wash out to the surface, after which the fire protection effect decreases over time. Acid-based products do not have a significant leaching problem due to changes in wood moisture, but by penetrating deep into the wood structure and interacting with cellulose, they reduce strength characteristics. Another method is to apply a coating based on organic or inorganic binders to the wood surface. Products based on organic binders have increased smoke generation and toxic substances, so their use is dangerous. Therefore, an analysis of protective materials for wooden building structures was carried out and the need to develop reliable methods for studying the leaching of flame-retardants necessary for the creation of new types of fire protection materials was established. There is a need to determine the conditions for the formation of a barrier to the leaching of flame-retardants and to establish a mechanism for inhibiting the transfer of moisture to the material. In this regard, a mathematical model of the process of leaching protective substances from wood after its impregnation with flame-retardants when using a polymeric shell made of organic material as a coating was developed, which allows us to evaluate the effectiveness of the polymeric shell by the amount of water absorbed. The results of calculating the weight gain of the sample during exposure to water indicate an ambiguous effect of the nature of the protection on water absorption. In particular, this implies the availability of data sufficient for the qualitative process of inhibiting moisture diffusion and identifying, on its basis, the time point from which the decrease in coating efficiency begins. Thus, there is reason to believe that it is possible to regulate the processes of wood protection in a targeted manner by using polymer coatings that can form a protective layer on the surface of the material that inhibits the rate of water absorption.
- Open Access
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 62-70
Establishing fire protection patterns in wood using impregnation compositions from inorganic salts
An issue related to using inorganic salts for fire protection of wood is to ensure their flame-inhibiting ability and compatibility with wood and application technology. That is why the object of research was to establish the effectiveness of inhibitory properties of mixtures of inorganic salts during interaction with the flame and enabling interplay with wood. A synergistic increase in the inhibitory capacity of mixtures of aqueous solutions of salts of diammonium phosphate and ammonium sulfate at a ratio of 2:1, and for a mixture based on orthophosphoric acid, urea, and oxyethylidenediphosphonic acid in the concentration range of 20–25 % by mass, has been proven. During the interaction of the specified mixtures with the wood surface, it was found that after application to the wood surface, the dispersed component of the free energy of the wood surface decreased to zero; instead, the polar component increased 13 times, which indicates a change in the wood surface. During the tests of wood samples on the effect of the burner flame, it was found that the untreated sample ignited on second 53, and the flame spread throughout the sample for 102 s. On the other hand, the samples treated with a mixture of an aqueous solution of phosphate and ammonium sulfate, as well as a mixture of aqueous solutions based on orthophosphoric acid and urea and oxyethylidenediphosphonic acid, did not catch fire, the flame did not spread over the surface, and the flammability index was 0. The practical significance is that the results were taken into account when designing flame retardant compositions for wood. Thus, there are reasons to assert the possibility of targeted regulation of wood protection processes through the use of mixtures of inorganic salts capable of forming a protective layer on the surface of the material that inhibits the burning of wood
- 25 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (131)) , 62-70
Open AccessEstablishing fire protection patterns in wood using impregnation compositions from inorganic salts
An issue related to using inorganic salts for fire protection of wood is to ensure their flame-inhibiting ability and compatibility with wood and application technology. That is why the object of research was to establish the effectiveness of inhibitory properties of mixtures of inorganic salts during interaction with the flame and enabling interplay with wood. A synergistic increase in the inhibitory capacity of mixtures of aqueous solutions of salts of diammonium phosphate and ammonium sulfate at a ratio of 2:1, and for a mixture based on orthophosphoric acid, urea, and oxyethylidenediphosphonic acid in the concentration range of 20–25 % by mass, has been proven. During the interaction of the specified mixtures with the wood surface, it was found that after application to the wood surface, the dispersed component of the free energy of the wood surface decreased to zero; instead, the polar component increased 13 times, which indicates a change in the wood surface. During the tests of wood samples on the effect of the burner flame, it was found that the untreated sample ignited on second 53, and the flame spread throughout the sample for 102 s. On the other hand, the samples treated with a mixture of an aqueous solution of phosphate and ammonium sulfate, as well as a mixture of aqueous solutions based on orthophosphoric acid and urea and oxyethylidenediphosphonic acid, did not catch fire, the flame did not spread over the surface, and the flammability index was 0. The practical significance is that the results were taken into account when designing flame retardant compositions for wood. Thus, there are reasons to assert the possibility of targeted regulation of wood protection processes through the use of mixtures of inorganic salts capable of forming a protective layer on the surface of the material that inhibits the burning of wood