FGFeng Gao

Feng Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Feng Gao has a total of 30 co-authors. Here are the top co-authors by number of shared publications:

  • Yan Li

    Key Lab of Mechanical Manufacturing Equipment of Shaanxi Province, Xi’an 710048, People’s Republic of China

    5 shared publications
  • Jihao Duan

    School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, China

    3 shared publications
  • Zhuofan Wu

    School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, China

    3 shared publications
  • Ben Liu

    School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an 710048, China

    2 shared publications
  • Gaochen Zhang

    School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, China

    2 shared publications
  • Mingke Cheng

    Lab. of NC Machine Tools and Integrated Manufacturing Equipment of the Education Ministry & Key Lab of Manufacturing Equipment of Shaanxi Province, Xi’an University of Technology, Xi’an, China

    2 shared publications

Latest Publications

  • A prior-guided dynamic fusion framework for dual-branch multi-domain fault diagnosis of rotating machinery

    by Ke Wang, Feng Gao, Yan Li, Zhen Wang

    Rotating machinery fault diagnosis remains challenging in practical vibration measurement scenarios, where variable operating regimes, noise interference, and non-stationary degradation hinder reliable interpretation of measured vibration signals. To address these challenges, this paper proposes a prior-guided dynamic fusion network (PGDFNet), termed PGDFNet, for robust vibration signal-based fault diagnosis through collaborative modeling of temporal dynamics, time-frequency structures, and statistical priors. Specifically, a gated temporal Mamba branch is designed to enhance fault-sensitive impulsive responses and capture long-range temporal dependencies from raw vibration signals. Meanwhile, a spatial-frequency Mamba branch models local spectral textures, multi-scale time-frequency structures, and global spatial-frequency dependencies from continuous wavelet transform representations. In addition, a prior-guided dynamic fusion module incorporates statistical priors into the dual-branch fusion process to adaptively coordinate temporal and time-frequency features under noisy measurement conditions. By integrating these components, PGDFNet improves the robustness and discriminability of vibration-based fault representations. Experiments on the CWRU, PU, and JNU datasets demonstrate that the proposed method outperforms representative baselines in classification accuracy, Gaussian and complex-noise robustness, class-imbalance robustness, and cross-domain transfer capability. Ablation, interpretability, and efficiency-complexity analyses further verify the effectiveness of the proposed components and the favorable trade-off between diagnostic performance and computational overhead.

  • Open Access

    Integrating Multi-Dimensional Value Stream Mapping and Multi-Objective Optimization for Dynamic WIP Control in Discrete Manufacturing

    by Ben Liu, Yan Li, Feng Gao

    Discrete manufacturing environments face increasing challenges in managing work-in-process (WIP) inventory due to growing product customization and demand volatility. While Value Stream Mapping (VSM) has been widely used for process improvement, traditional approaches lack the ability to dynamically control WIP levels while optimizing multiple performance dimensions simultaneously. This research addresses this gap by developing an integrated framework that synergizes Multi-Dimensional Value Stream Mapping (MD-VSM) with multi-objective optimization, functioning as a specialized digital twin for dynamic WIP control. The framework employs a four-layer architecture that connects real-time data collection, multi-dimensional modeling, dynamic WIP monitoring, and execution control through closed-loop feedback mechanisms. A mixed-integer optimization model is used to balance time, cost, and quality objectives. Validation using a high-fidelity simulation, parameterized with real-world industrial data, demonstrates that the proposed approach yielded up to a 31% reduction in inventory costs while maintaining production throughput and showed a 42% faster recovery from equipment failures compared to traditional methods. Furthermore, a comprehensive sensitivity analysis confirms the framework’s robustness. The system demonstrated stable performance even when key operational parameters, such as WIP upper limits and buffer capacity coefficients, were varied by up to ±30%, underscoring its reliability for real-world deployment. These findings provide manufacturers with a validated methodology for enhancing operational efficiency and production flexibility, advancing the integration of lean principles with data-driven, digital twin-based control systems.


  • Open Access

    Milling-Force Prediction Model for 304 Stainless Steel Considering Tool Wear

    by Changxu Wang, Yan Li, Feng Gao, Kejun Wu, Kan Yin, Peng He, Yunjiao Xu

    The high-performance alloy, 304 stainless steel, is widely used in various industries. However, its material properties lead to severe tool wear during milling processes, significantly increasing milling force and adversely impacting machining quality and efficiency. Consequently, an accurate milling-force model is crucial for guiding the formulation and optimization of machining parameters. This paper presents a milling-force prediction model for 304 stainless steel that incorporates the effect of tool wear, based on the mechanistic modeling approach. Side-milling experiments on 304 stainless steel were conducted to analyze the relationship between milling force and tool wear, identify the model coefficients, and validate the prediction accuracy of the milling-force model. The results demonstrate that the model accurately predicts the milling forces of worn tools while side milling 304 stainless steel under various machining parameters and tool wear conditions.


  • Open Access

    Cost-Sensitive YOLOv5 for Detecting Surface Defects of Industrial Products

    by Ben Liu, Feng Gao, Yan Li

    Owing to the remarkable development of deep learning algorithms, defect detection techniques based on deep neural networks have been extensively applied in industrial production. Most existing surface defect detection models assign equal costs to the classification errors among different defect categories but do not strictly distinguish them. However, various errors can generate a great discrepancy in decision risk or classification costs and then produce a cost-sensitive issue that is crucial to the manufacturing process. To address this engineering challenge, we propose a novel supervised classification cost-sensitive learning method (SCCS) and apply it to improve YOLOv5 as CS-YOLOv5, where the classification loss function of object detection was reconstructed according to a new cost-sensitive learning criterion explained by a label–cost vector selection method. In this way, the classification risk information from a cost matrix is directly introduced into the detection model and fully exploited in training. As a result, the developed approach can make low-risk classification decisions for defect detection. It is applicable for direct cost-sensitive learning based on a cost matrix to implement detection tasks. Using two datasets of a painting surface and a hot-rolled steel strip surface, our CS-YOLOv5 model outperforms the original version with respect to cost under different positive classes, coefficients, and weight ratios, but also maintains effective detection performance measured by mAP and F1 scores.


  • Open Access

    A Novel Method for Improving the Skiving Accuracy of Gears with Profile and Lead Modifications

    by Zheng Guo, Ruidong Xie, Wenchao Guo, Weimin Han, Feng Gao, Yanfei Zhang

    Skiving is an efficient gear cutting technology with relatively high machining accuracy, especially for internal gears. Nevertheless, the machining accuracy can hardly be satisfied if the skived gear is modified, so we try to extend the definition and hypotheses domain of the previous works. In this paper, fundamental research is conducted to further improve the skiving accuracy. Firstly, a new type of skiving tool with double rake faces is proposed for flexibly meeting different modification requirements of the two flanks of the work gear teeth. Secondly, the mathematical model of curve-surface conjugated cutting edges of the skiving tool for enveloping the tooth flanks of the working gear with profile modification is established. Then, the algorithm of the skiving tool path with alterable shaft angle in the cutting process is proposed for eliminating the twist of gear tooth flanks with lead modification. Finally, machining simulations are carried out to verify the feasibility of the proposed improved skiving methods.


  • Open Access

    Dynamic Tangential Contact Stiffness and Damping Model of the Solid–Liquid Interface

    by Lixia Peng, Zhiqiang Gao, Zhaoyang Ban, Feng Gao, Weiping Fu

    In order to establish the tangential contact stiffness and damping model of the solid–liquid interface by tangential exciting vibration force under mixed lubrication, the finite difference method was firstly used to solve the average flow equation considering the effect of roughness on the lubrication effect, and the bearing capacity, shear force, and friction coefficient of the oil film were obtained, and thereby the dynamic tangential contact stiffness and damping of the oil film under tangential harmonic excitation were calculated. Then, according to the relationship between the normal deformation and the load of the solid contact microconvex body in the elastic/elastic–plastic/plastic deformation stage, integrating the tangential stick–slip theory, considering the effect of fluid lubrication on the solid contact friction coefficient, and tangential dynamic excitation, the tangential contact stiffness and damping of the microconvex body in three deformation stages were calculated. Furthermore, the dynamic tangential contact stiffness and damping of the solid–liquid interface were obtained by summing the solid surface contact part and the solid–liquid contact part in parallel according to the assumption of microconvex Gaussian distribution. Finally, through simulation analysis and experiments, the variation of the tangential dynamic contact stiffness and damping of the solid–liquid interface with normal load, tangential exciting frequency, and displacement amplitude was revealed and verified.