Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yan Li has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
Feng Gao
Key Lab of Mechanical Manufacturing Equipment of Shaanxi Province
10 shared publications- Feng Gao
School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, China
5 shared publications - Feng Gao
Xi’an University of Technology
3 shared publications Kejun Wu
Key Lab of Mechanical Manufacturing Equipment of Shaanxi Province, Xi’an 710048, People’s Republic of China
3 shared publications- Wei Cheng
Key Lab of Mechanical Manufacturing Equipment of Shaanxi Province, Xi’an 710048, People’s Republic of China
3 shared publications Wenqiang Li
Key Lab of Mechanical Manufacturing Equipment of Shaanxi Province, Xi’an 710048, People’s Republic of China
3 shared publications
Latest Publications
- 1 September 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (18) , 185531
Pose optimization method for three-dimensional spur tooth surface measurement based on line laser
Vibration and noise in gear transmission systems predominantly stem from non-ideal tooth contact states. To accurately elucidate the root cause of these dynamic behaviors, it is imperative to acquire comprehensive geometric information of the engaging tooth surfaces. However, conventional contact-based inspection methods generally rely on sparse sampling, which suffers from low efficiency and fails to capture the holistic topography of the tooth surface. To address these limitations, this paper proposes a high-precision 3D gear measurement method utilizing a line laser sensor. Upon defining a dedicated measurement coordinate system, a pose optimization model for the offset line laser is formulated. By integrating the involute parametric equation, the model determines the optimal scanning angle for gears with varying specifications to ensure complete coverage. Subsequently, the raw point clouds are subjected to preprocessing, including filtering, denoising, and downsampling. Precise spatial alignment of the measured data is achieved via principal component analysis for coarse registration, followed by the iterative closest point algorithm for fine registration, ultimately generating a topological error map for quantitative evaluation. Experimental validation demonstrates that the proposed pose optimization significantly enhances measurement accuracy and efficiency. The standard deviation of the tooth surface normal error is 4.06 μ m. Validation experiments compared with a gear metrology center confirm that the proposed method satisfies the detection requirements for grade 4 accuracy gears specified in ISO 1328-1 standards, by fully leveraging the sensor’s measurement capability.
- 1 September 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (18) , 185531
Pose optimization method for three-dimensional spur tooth surface measurement based on line laser
Vibration and noise in gear transmission systems predominantly stem from non-ideal tooth contact states. To accurately elucidate the root cause of these dynamic behaviors, it is imperative to acquire comprehensive geometric information of the engaging tooth surfaces. However, conventional contact-based inspection methods generally rely on sparse sampling, which suffers from low efficiency and fails to capture the holistic topography of the tooth surface. To address these limitations, this paper proposes a high-precision 3D gear measurement method utilizing a line laser sensor. Upon defining a dedicated measurement coordinate system, a pose optimization model for the offset line laser is formulated. By integrating the involute parametric equation, the model determines the optimal scanning angle for gears with varying specifications to ensure complete coverage. Subsequently, the raw point clouds are subjected to preprocessing, including filtering, denoising, and downsampling. Precise spatial alignment of the measured data is achieved via principal component analysis for coarse registration, followed by the iterative closest point algorithm for fine registration, ultimately generating a topological error map for quantitative evaluation. Experimental validation demonstrates that the proposed pose optimization significantly enhances measurement accuracy and efficiency. The standard deviation of the tooth surface normal error is 4.06 μ m. Validation experiments compared with a gear metrology center confirm that the proposed method satisfies the detection requirements for grade 4 accuracy gears specified in ISO 1328-1 standards, by fully leveraging the sensor’s measurement capability.
- 19 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (25) , 256108
A prior-guided dynamic fusion framework for dual-branch multi-domain fault diagnosis of rotating machinery
Rotating machinery fault diagnosis remains challenging in practical vibration measurement scenarios, where variable operating regimes, noise interference, and non-stationary degradation hinder reliable interpretation of measured vibration signals. To address these challenges, this paper proposes a prior-guided dynamic fusion network (PGDFNet), termed PGDFNet, for robust vibration signal-based fault diagnosis through collaborative modeling of temporal dynamics, time-frequency structures, and statistical priors. Specifically, a gated temporal Mamba branch is designed to enhance fault-sensitive impulsive responses and capture long-range temporal dependencies from raw vibration signals. Meanwhile, a spatial-frequency Mamba branch models local spectral textures, multi-scale time-frequency structures, and global spatial-frequency dependencies from continuous wavelet transform representations. In addition, a prior-guided dynamic fusion module incorporates statistical priors into the dual-branch fusion process to adaptively coordinate temporal and time-frequency features under noisy measurement conditions. By integrating these components, PGDFNet improves the robustness and discriminability of vibration-based fault representations. Experiments on the CWRU, PU, and JNU datasets demonstrate that the proposed method outperforms representative baselines in classification accuracy, Gaussian and complex-noise robustness, class-imbalance robustness, and cross-domain transfer capability. Ablation, interpretability, and efficiency-complexity analyses further verify the effectiveness of the proposed components and the favorable trade-off between diagnostic performance and computational overhead.
- 19 June 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (25) , 256108
A prior-guided dynamic fusion framework for dual-branch multi-domain fault diagnosis of rotating machinery
Rotating machinery fault diagnosis remains challenging in practical vibration measurement scenarios, where variable operating regimes, noise interference, and non-stationary degradation hinder reliable interpretation of measured vibration signals. To address these challenges, this paper proposes a prior-guided dynamic fusion network (PGDFNet), termed PGDFNet, for robust vibration signal-based fault diagnosis through collaborative modeling of temporal dynamics, time-frequency structures, and statistical priors. Specifically, a gated temporal Mamba branch is designed to enhance fault-sensitive impulsive responses and capture long-range temporal dependencies from raw vibration signals. Meanwhile, a spatial-frequency Mamba branch models local spectral textures, multi-scale time-frequency structures, and global spatial-frequency dependencies from continuous wavelet transform representations. In addition, a prior-guided dynamic fusion module incorporates statistical priors into the dual-branch fusion process to adaptively coordinate temporal and time-frequency features under noisy measurement conditions. By integrating these components, PGDFNet improves the robustness and discriminability of vibration-based fault representations. Experiments on the CWRU, PU, and JNU datasets demonstrate that the proposed method outperforms representative baselines in classification accuracy, Gaussian and complex-noise robustness, class-imbalance robustness, and cross-domain transfer capability. Ablation, interpretability, and efficiency-complexity analyses further verify the effectiveness of the proposed components and the favorable trade-off between diagnostic performance and computational overhead.
- 2 April 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (15)
Geometric Deviation Detection Method of Worm Wheel Based on Chromatic Confocal Principle
:Conventional contact-based measurement methods for worm wheels face challenges due to complicated measuring paths and low lateral resolution, limiting operability and efficiency. This paper proposes a non-contact deviation measurement method leveraging chromatic confocal principles, in which the optimal sensor lateral offset distance was derived under the constraints of minimizing the angle between the incident beam and the tooth flank normal, while avoiding occlusion from adjacent teeth. The acquired data from a spectral confocal displacement sensor are transformed into polar coordinates within the worm wheel coordinate system, providing a direct geometric representation of the tooth flank profile. The deviations between actual and theoretical profiles were calculated with coordinate metrology to evaluate profile deviations and pitch deviations. The experimental results indicate that, in comparison to conventional contact-based measurements performed on a Gear Measuring Center, the proposed optical measurement approach achieves comparable accuracy in evaluating single pitch deviation, total cumulative pitch deviation, and total profile deviation, while substantially reducing check time, providing an effective way for the efficient and accurate inspection of worm wheels.
- 2 April 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (15)
Geometric Deviation Detection Method of Worm Wheel Based on Chromatic Confocal Principle
:Conventional contact-based measurement methods for worm wheels face challenges due to complicated measuring paths and low lateral resolution, limiting operability and efficiency. This paper proposes a non-contact deviation measurement method leveraging chromatic confocal principles, in which the optimal sensor lateral offset distance was derived under the constraints of minimizing the angle between the incident beam and the tooth flank normal, while avoiding occlusion from adjacent teeth. The acquired data from a spectral confocal displacement sensor are transformed into polar coordinates within the worm wheel coordinate system, providing a direct geometric representation of the tooth flank profile. The deviations between actual and theoretical profiles were calculated with coordinate metrology to evaluate profile deviations and pitch deviations. The experimental results indicate that, in comparison to conventional contact-based measurements performed on a Gear Measuring Center, the proposed optical measurement approach achieves comparable accuracy in evaluating single pitch deviation, total cumulative pitch deviation, and total profile deviation, while substantially reducing check time, providing an effective way for the efficient and accurate inspection of worm wheels.
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (5) , 055512
A measurement method of tooth profile error for Gear hobs
Gear hobbing is a highly efficient and typical tooth manufacturing method in which hob accuracy directly affects the quality of machined gears. Therefore, geometric error inspection and precision grade evaluation of gear hobs, characterized by discontinuous helical tooth surfaces and periodic distribution of chip grooves, are essential prerequisites for enhancing the machining accuracy of gears. A novel probing-based measurement method for identifying the cutting edge of gear hobs was proposed. By applying the principles of differential geometry, the basic worm helical surface equation and rake surface equation of Archimedes gear hobs were derived, and a mathematical model of the hob cutting edge profile was established. The measurement path for the tooth profile error of the hob cutting edge is planned based on the complex spatial morphology of the hob. The hob cutting-edge profile error measurement experiment was conducted at the GMC 400 Gear Measurement Center. The measurement data were processed in accordance with the calculation equation for the hob tooth profile error in GB/T6084-2016, and the precision grade of the hob was evaluated in terms of the modulus range and tolerance value. The minimum error was 6.3 μm(grade 2 A) and the standard deviation of the repeatability experiment was less than 0.15 μm. The experiment verified the correctness of the proposed method and provided a reliable technical scheme for high-accuracy measurement of gear hobs.
- 1 March 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (5) , 055512
A measurement method of tooth profile error for Gear hobs
Gear hobbing is a highly efficient and typical tooth manufacturing method in which hob accuracy directly affects the quality of machined gears. Therefore, geometric error inspection and precision grade evaluation of gear hobs, characterized by discontinuous helical tooth surfaces and periodic distribution of chip grooves, are essential prerequisites for enhancing the machining accuracy of gears. A novel probing-based measurement method for identifying the cutting edge of gear hobs was proposed. By applying the principles of differential geometry, the basic worm helical surface equation and rake surface equation of Archimedes gear hobs were derived, and a mathematical model of the hob cutting edge profile was established. The measurement path for the tooth profile error of the hob cutting edge is planned based on the complex spatial morphology of the hob. The hob cutting-edge profile error measurement experiment was conducted at the GMC 400 Gear Measurement Center. The measurement data were processed in accordance with the calculation equation for the hob tooth profile error in GB/T6084-2016, and the precision grade of the hob was evaluated in terms of the modulus range and tolerance value. The minimum error was 6.3 μm(grade 2 A) and the standard deviation of the repeatability experiment was less than 0.15 μm. The experiment verified the correctness of the proposed method and provided a reliable technical scheme for high-accuracy measurement of gear hobs.
- 30 January 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 240 (11) , 2051-2065
CNN-BiLSTM-AM based thermal error modeling of motorized spindle for precision CNC cylindrical grinding machine
The motorized spindle is the core component of a CNC grinding machine. During the machining process, the working conditions are complex and variable. The uneven temperature distribution caused by internal and external heat sources in the motorized spindle leads to nonlinear and time-varying thermal deformation, particularly, axial thermal elongation can exceed several tens of micrometers, significantly compromising the grinder’s machining accuracy. To effectively implement thermal error compensation with high accuracy and cost-efficiency, a CNN-BiLSTM-AM based thermal error prediction model for the motorized spindle is proposed, which combines CNN for spatial feature extraction, BiLSTM for capturing long temporal dependencies, and an attention mechanism to enhance feature relevance. The model’s prediction performance and robustness were validated through thermal characteristic experiments under various working conditions. In the predictions for Tests 2 and 3, the maximum residuals between the predicted and measured axial thermal deformation were 1.326 μm and 1.495 μm, with R 2 values as high as 0.991 and 0.992, MAEs as low as 0.524 μm and 0.589 μm, and RMSEs of 0.596 μm and 0.691 μm, respectively. All metrics outperformed those of comparative methods. Furthermore, the thermal compensation experiments were performed to verify the model’s practical applicability.
- 30 January 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 240 (11) , 2051-2065
CNN-BiLSTM-AM based thermal error modeling of motorized spindle for precision CNC cylindrical grinding machine
The motorized spindle is the core component of a CNC grinding machine. During the machining process, the working conditions are complex and variable. The uneven temperature distribution caused by internal and external heat sources in the motorized spindle leads to nonlinear and time-varying thermal deformation, particularly, axial thermal elongation can exceed several tens of micrometers, significantly compromising the grinder’s machining accuracy. To effectively implement thermal error compensation with high accuracy and cost-efficiency, a CNN-BiLSTM-AM based thermal error prediction model for the motorized spindle is proposed, which combines CNN for spatial feature extraction, BiLSTM for capturing long temporal dependencies, and an attention mechanism to enhance feature relevance. The model’s prediction performance and robustness were validated through thermal characteristic experiments under various working conditions. In the predictions for Tests 2 and 3, the maximum residuals between the predicted and measured axial thermal deformation were 1.326 μm and 1.495 μm, with R 2 values as high as 0.991 and 0.992, MAEs as low as 0.524 μm and 0.589 μm, and RMSEs of 0.596 μm and 0.691 μm, respectively. All metrics outperformed those of comparative methods. Furthermore, the thermal compensation experiments were performed to verify the model’s practical applicability.
- 10 October 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (1-2) , 411-426
Research on the mechanism of multi-grains interaction in TC17 flexible abrasive disc grinding
- 10 October 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 141 (1-2) , 411-426
Research on the mechanism of multi-grains interaction in TC17 flexible abrasive disc grinding
- 19 August 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 140 (1-2) , 923-949
An improved prediction model of milling force incorporating tool wear effects
- 19 August 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 140 (1-2) , 923-949
An improved prediction model of milling force incorporating tool wear effects
- Open Access
- 14 August 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (16) , 2610
Integrating Multi-Dimensional Value Stream Mapping and Multi-Objective Optimization for Dynamic WIP Control in Discrete Manufacturing
Discrete manufacturing environments face increasing challenges in managing work-in-process (WIP) inventory due to growing product customization and demand volatility. While Value Stream Mapping (VSM) has been widely used for process improvement, traditional approaches lack the ability to dynamically control WIP levels while optimizing multiple performance dimensions simultaneously. This research addresses this gap by developing an integrated framework that synergizes Multi-Dimensional Value Stream Mapping (MD-VSM) with multi-objective optimization, functioning as a specialized digital twin for dynamic WIP control. The framework employs a four-layer architecture that connects real-time data collection, multi-dimensional modeling, dynamic WIP monitoring, and execution control through closed-loop feedback mechanisms. A mixed-integer optimization model is used to balance time, cost, and quality objectives. Validation using a high-fidelity simulation, parameterized with real-world industrial data, demonstrates that the proposed approach yielded up to a 31% reduction in inventory costs while maintaining production throughput and showed a 42% faster recovery from equipment failures compared to traditional methods. Furthermore, a comprehensive sensitivity analysis confirms the framework’s robustness. The system demonstrated stable performance even when key operational parameters, such as WIP upper limits and buffer capacity coefficients, were varied by up to ±30%, underscoring its reliability for real-world deployment. These findings provide manufacturers with a validated methodology for enhancing operational efficiency and production flexibility, advancing the integration of lean principles with data-driven, digital twin-based control systems.
- 14 August 2025
- Published by MDPI AG in Mathematics
- Vol. 13 (16) , 2610
Open AccessIntegrating Multi-Dimensional Value Stream Mapping and Multi-Objective Optimization for Dynamic WIP Control in Discrete Manufacturing
Discrete manufacturing environments face increasing challenges in managing work-in-process (WIP) inventory due to growing product customization and demand volatility. While Value Stream Mapping (VSM) has been widely used for process improvement, traditional approaches lack the ability to dynamically control WIP levels while optimizing multiple performance dimensions simultaneously. This research addresses this gap by developing an integrated framework that synergizes Multi-Dimensional Value Stream Mapping (MD-VSM) with multi-objective optimization, functioning as a specialized digital twin for dynamic WIP control. The framework employs a four-layer architecture that connects real-time data collection, multi-dimensional modeling, dynamic WIP monitoring, and execution control through closed-loop feedback mechanisms. A mixed-integer optimization model is used to balance time, cost, and quality objectives. Validation using a high-fidelity simulation, parameterized with real-world industrial data, demonstrates that the proposed approach yielded up to a 31% reduction in inventory costs while maintaining production throughput and showed a 42% faster recovery from equipment failures compared to traditional methods. Furthermore, a comprehensive sensitivity analysis confirms the framework’s robustness. The system demonstrated stable performance even when key operational parameters, such as WIP upper limits and buffer capacity coefficients, were varied by up to ±30%, underscoring its reliability for real-world deployment. These findings provide manufacturers with a validated methodology for enhancing operational efficiency and production flexibility, advancing the integration of lean principles with data-driven, digital twin-based control systems.
- 15 May 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (5) , 055026
A machine vision-based dimension measurement method of shaft parts with sub-pixel edge
The evolution of the automotive industry demands gearboxes that offer improved specifications in terms of power transfer and shifting performance. The high-quality standards required for transmission component manufacturing processes render it necessary to measure shaft parts. To realize online diameter inspection of shaft parts in the gearbox production line, a machine vision-based non-contact metrology method with Canny–Steger subpixel edge detection is proposed. The interference background was separated from the measured target using ROI technology. Morphological closure operations and bilateral filtering preprocessing were performed on the collected images to achieve filtering and denoising, respectively. With the extraction of pixel-level edges using the Canny operator as a basis, the Steger algorithm was used to detect the subpixel edges. The edges and normal directions are derived from the Hessian matrix. Subsequently, Taylor polynomials are applied to the pixel grayscale in the normal direction to obtain the grayscale distribution function, the extreme values of which are solved to obtain the subpixel edge point positions. The fitting data are employed to evaluate the machining errors of the parts, significantly reducing redundant calculations in the Steger algorithm process and improving the detection speed. The proposed method was validated through synthetic and real experiments. Experimental results demonstrate that the measurement method proposed in this paper can rapidly measure shaft parts. Its diameter measurement accuracy can reach 3 μm, and the repetitive measurement accuracy can reach 2 μm. Compared with pixel-level edge detection, the accuracy has been improved by 60%.
- 15 May 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (5) , 055026
A machine vision-based dimension measurement method of shaft parts with sub-pixel edge
The evolution of the automotive industry demands gearboxes that offer improved specifications in terms of power transfer and shifting performance. The high-quality standards required for transmission component manufacturing processes render it necessary to measure shaft parts. To realize online diameter inspection of shaft parts in the gearbox production line, a machine vision-based non-contact metrology method with Canny–Steger subpixel edge detection is proposed. The interference background was separated from the measured target using ROI technology. Morphological closure operations and bilateral filtering preprocessing were performed on the collected images to achieve filtering and denoising, respectively. With the extraction of pixel-level edges using the Canny operator as a basis, the Steger algorithm was used to detect the subpixel edges. The edges and normal directions are derived from the Hessian matrix. Subsequently, Taylor polynomials are applied to the pixel grayscale in the normal direction to obtain the grayscale distribution function, the extreme values of which are solved to obtain the subpixel edge point positions. The fitting data are employed to evaluate the machining errors of the parts, significantly reducing redundant calculations in the Steger algorithm process and improving the detection speed. The proposed method was validated through synthetic and real experiments. Experimental results demonstrate that the measurement method proposed in this paper can rapidly measure shaft parts. Its diameter measurement accuracy can reach 3 μm, and the repetitive measurement accuracy can reach 2 μm. Compared with pixel-level edge detection, the accuracy has been improved by 60%.
- 20 February 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (18)
A Polypyrrole/Carbon Nanotube Based Hydrogel Sensor With High Sensitivity for Strain Detection
Conductive hydrogels hold significant promise in the fields of flexible electronics and smart sensing applications owing to their outstanding stretchability and electrical conductivity. In this study, a dual‐network hydrogel based on polyacrylamide (PAAM) and sodium alginate (SA) networks was constructed to fabricate highly sensitive strain sensors. Carbon nanotubes (CNTs) were incorporated into the hydrogel system, and polypyrrole (PPy) nanoparticles were synthesized using SA as a soft template. During preparing process, ultrasonic oscillation was employed to facilitate the uniform distribution of PPy in the hydrogel matrix, and then a CNTs–PPy conductive pathway was formed, thereby enhancing the conductivity and sensitivity of the hydrogel. The prepared PAAM–SA–CNTs–PPy hydrogel exhibits high electrical conductivity (4.84 S/m), superior mechanical properties (including a tensile strength of 683.5 kPa at 812%), high toughness, good self‐healing, and adhesion properties. The assembled strain sensors demonstrate high sensing capability, a wide measurement range (the gauge factor of 2.67 for 0%–400% strain and the gauge factor of 5.25 for 400%–800% strain), rapid response times (126 ms), and good stability. The developed hydrogel‐based conductive strain sensor has the potential to be excellent candidates as wearable sensing devices for monitoring human movements.
- 20 February 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (18)
A Polypyrrole/Carbon Nanotube Based Hydrogel Sensor With High Sensitivity for Strain Detection
Conductive hydrogels hold significant promise in the fields of flexible electronics and smart sensing applications owing to their outstanding stretchability and electrical conductivity. In this study, a dual‐network hydrogel based on polyacrylamide (PAAM) and sodium alginate (SA) networks was constructed to fabricate highly sensitive strain sensors. Carbon nanotubes (CNTs) were incorporated into the hydrogel system, and polypyrrole (PPy) nanoparticles were synthesized using SA as a soft template. During preparing process, ultrasonic oscillation was employed to facilitate the uniform distribution of PPy in the hydrogel matrix, and then a CNTs–PPy conductive pathway was formed, thereby enhancing the conductivity and sensitivity of the hydrogel. The prepared PAAM–SA–CNTs–PPy hydrogel exhibits high electrical conductivity (4.84 S/m), superior mechanical properties (including a tensile strength of 683.5 kPa at 812%), high toughness, good self‐healing, and adhesion properties. The assembled strain sensors demonstrate high sensing capability, a wide measurement range (the gauge factor of 2.67 for 0%–400% strain and the gauge factor of 5.25 for 400%–800% strain), rapid response times (126 ms), and good stability. The developed hydrogel‐based conductive strain sensor has the potential to be excellent candidates as wearable sensing devices for monitoring human movements.