Jung-Sik Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jung-Sik Kim has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Gregory N. Parsons
Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, USA
6 shared publications - Hannah R. M. Margavio
Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, North Carolina 27606, United States
2 shared publications - Hwan Oh
Department of Chemical and Biomolecular Engineering North Carolina State University Raleigh NC 27695 USA
2 shared publications - Seung Keun Song
Department of Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, North Carolina 27695, United States
2 shared publications - Dennis T. Lee
Department of Chemical and Biomolecular Engineering & Institute for NanoBioTechnology Johns Hopkins University 3400 N. Charles Street Baltimore MD 21218 USA
1 shared publication Gance Dai
School of Chemical Engineering East China University of Science and Technology Shanghai China
1 shared publication
Latest Publications
- 30 September 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 063401
Growth behavior and substrate selective deposition of polypyrrole, polythiophene, and polyaniline by oxidative chemical vapor deposition and molecular layer deposition
Bottom-up self-aligned area-selective deposition (ASD) plays an important role in patterning of advanced electronic devices. Specifically, ASD of organic materials can be utilized for nucleation inhibitors, sacrificial layers, and air-gap materials for next-generation nanoscale processing. This work introduces fundamental growth behavior of various conjugated polymers including polypyrrole, polythiophene, and polyaniline via oxidative molecular layer deposition and chemical vapor deposition. Effects of process parameters on film properties are described, and ASD behavior of different polymers are quantitatively characterized. These findings expand fundamental understanding of conjugated polymer deposition and provide new perspectives for ASD of organic thin films.
- 30 September 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 063401
Growth behavior and substrate selective deposition of polypyrrole, polythiophene, and polyaniline by oxidative chemical vapor deposition and molecular layer deposition
Bottom-up self-aligned area-selective deposition (ASD) plays an important role in patterning of advanced electronic devices. Specifically, ASD of organic materials can be utilized for nucleation inhibitors, sacrificial layers, and air-gap materials for next-generation nanoscale processing. This work introduces fundamental growth behavior of various conjugated polymers including polypyrrole, polythiophene, and polyaniline via oxidative molecular layer deposition and chemical vapor deposition. Effects of process parameters on film properties are described, and ASD behavior of different polymers are quantitatively characterized. These findings expand fundamental understanding of conjugated polymer deposition and provide new perspectives for ASD of organic thin films.
- Open Access
- 7 September 2022
- Published by Wiley in AIChE Journal
- Vol. 68 (12)
Modeling of deposit formation in mesoporous substrates via atomic layer deposition: Insights from pore‐scale simulation
Atomic layer deposition (ALD) has been a promising technique in fabricating membranes and tuning their properties with a precision at the atomic level. Fabrication of zeolitic imidazolate framework (ZIF) membranes using the ligand‐induced permselectivation (LIPS) method starts with the formation of an oxide in a mesoporous substrate by ALD and is followed by the transformation of this oxide to ZIF using imidazolate vapor treatment. The objective of the ALD step is to block the mesopores with a thin deposit, that is, one with small penetration depth and small thickness on the top surface of the substrate. Unlike typical ALD on nonporous substrates, where all available sites react per ALD cycle, thin deposit formation in a mesoporous substrate requires that only a small fraction of the available deposition sites (i.e., close to the substrate surface) is subjected to ALD. Consequently, reactant dosing and duration of pulses are important process variables which, together with diffusion and reaction kinetics determine the deposit structure. Quantitative understanding of the interplay of these variables and phenomena can enable the rational design of ALD within mesoporous substrates. Here, we extend our earlier modeling effort considering the coexistence of ALD both inside the pores and on the external surface of the substrate. Finite‐volume based models were developed and validated to simulate the two distinct modes of deposition cycle by cycle. The total mass uptake of the substrate with ALD cycles can be predicted using the combined surface deposition and pore reaction–diffusion models as affirmed by in situ quartz crystal microbalance experimental data. The ALD reactor model combined with the deposition model can accurately capture the number of ALD cycles needed to block the pores of the substrate. Based on the model, we designed a modified ALD process and examined the performance of the corresponding LIPS membranes. The present modeling work provides a new understanding of the deposit formation via ALD within mesoporous substrates for a variety of membrane applications.
- 7 September 2022
- Published by Wiley in AIChE Journal
- Vol. 68 (12)
Open AccessModeling of deposit formation in mesoporous substrates via atomic layer deposition: Insights from pore‐scale simulation
Atomic layer deposition (ALD) has been a promising technique in fabricating membranes and tuning their properties with a precision at the atomic level. Fabrication of zeolitic imidazolate framework (ZIF) membranes using the ligand‐induced permselectivation (LIPS) method starts with the formation of an oxide in a mesoporous substrate by ALD and is followed by the transformation of this oxide to ZIF using imidazolate vapor treatment. The objective of the ALD step is to block the mesopores with a thin deposit, that is, one with small penetration depth and small thickness on the top surface of the substrate. Unlike typical ALD on nonporous substrates, where all available sites react per ALD cycle, thin deposit formation in a mesoporous substrate requires that only a small fraction of the available deposition sites (i.e., close to the substrate surface) is subjected to ALD. Consequently, reactant dosing and duration of pulses are important process variables which, together with diffusion and reaction kinetics determine the deposit structure. Quantitative understanding of the interplay of these variables and phenomena can enable the rational design of ALD within mesoporous substrates. Here, we extend our earlier modeling effort considering the coexistence of ALD both inside the pores and on the external surface of the substrate. Finite‐volume based models were developed and validated to simulate the two distinct modes of deposition cycle by cycle. The total mass uptake of the substrate with ALD cycles can be predicted using the combined surface deposition and pore reaction–diffusion models as affirmed by in situ quartz crystal microbalance experimental data. The ALD reactor model combined with the deposition model can accurately capture the number of ALD cycles needed to block the pores of the substrate. Based on the model, we designed a modified ALD process and examined the performance of the corresponding LIPS membranes. The present modeling work provides a new understanding of the deposit formation via ALD within mesoporous substrates for a variety of membrane applications.
- 22 November 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (23) , 9221-9230
Nanopatterned Area-Selective Vapor Deposition of PEDOT on SiO2 vs Si-H: Improved Selectivity Using Chemical Vapor Deposition vs Molecular Layer Deposition
- 22 November 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (23) , 9221-9230
Nanopatterned Area-Selective Vapor Deposition of PEDOT on SiO2 vs Si-H: Improved Selectivity Using Chemical Vapor Deposition vs Molecular Layer Deposition
- 25 June 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (7) , 12276-12285
Multimaterial Self-Aligned Nanopatterning by Simultaneous Adjacent Thin Film Deposition and Etching
Printed component sizes in electronic circuits are approaching 10 nm, but inherent variability in feature alignment during photolithography poses a fundamental barrier for continued device scaling. Deposition-based self-aligned patterning is being introduced, but nuclei defects remain an overarching problem. This work introduces low-temperature chemically self-aligned film growth via simultaneous thin film deposition and etching in adjacent regions on a nanopatterned surface. During deposition, nucleation defects are avoided in nongrowth regions because deposition reactants are locally consumed via sacrificial etching. For a range of materials and process conditions, thermodynamic modeling confirms that deposition and etching are both energetically favorable. We demonstrate nanoscale patterning of tungsten at 220 °C with simultaneous etching of TiO2. Area selective deposition (ASD) of the sacrificial TiO2 layer produces an orthogonal sequence for self-aligned patterning of two materials on one starting pattern, i.e., TiO2 ASD on SiO2 followed by W ASD on Si–H. Experiments also show capacity for self-aligned dielectric patterning via favorable deposition of AlF3 on Al2O3 at 240 °C with simultaneous atomic layer etching of sacrificial ZnO. Simultaneous deposition and etching provides opportunities for low-temperature bottom-up self-aligned patterning for electronic and other nanoscale systems.
- 25 June 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (7) , 12276-12285
Multimaterial Self-Aligned Nanopatterning by Simultaneous Adjacent Thin Film Deposition and Etching
Printed component sizes in electronic circuits are approaching 10 nm, but inherent variability in feature alignment during photolithography poses a fundamental barrier for continued device scaling. Deposition-based self-aligned patterning is being introduced, but nuclei defects remain an overarching problem. This work introduces low-temperature chemically self-aligned film growth via simultaneous thin film deposition and etching in adjacent regions on a nanopatterned surface. During deposition, nucleation defects are avoided in nongrowth regions because deposition reactants are locally consumed via sacrificial etching. For a range of materials and process conditions, thermodynamic modeling confirms that deposition and etching are both energetically favorable. We demonstrate nanoscale patterning of tungsten at 220 °C with simultaneous etching of TiO2. Area selective deposition (ASD) of the sacrificial TiO2 layer produces an orthogonal sequence for self-aligned patterning of two materials on one starting pattern, i.e., TiO2 ASD on SiO2 followed by W ASD on Si–H. Experiments also show capacity for self-aligned dielectric patterning via favorable deposition of AlF3 on Al2O3 at 240 °C with simultaneous atomic layer etching of sacrificial ZnO. Simultaneous deposition and etching provides opportunities for low-temperature bottom-up self-aligned patterning for electronic and other nanoscale systems.
- 8 September 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 128 (10) , 105302
Effect of reactant dosing on selectivity during area-selective deposition of TiO2 via integrated atomic layer deposition and atomic layer etching
A key hallmark of atomic layer deposition (ALD) is that it proceeds via self-limiting reactions. For a good ALD process, long reactant exposure times beyond that required for saturation on planar substrates can be useful, for example, to achieve conformal growth on high aspect ratio nanoscale trenches, while maintaining consistent deposition across large-area surfaces. Area-selective deposition (ASD) is becoming an enabling process for nanoscale pattern modification on advanced nanoelectronic devices. Herein, we demonstrate that during area-selective ALD, achieved by direct coupling of ALD and thermal atomic layer etching (ALE), excess reactant exposure can have a substantially detrimental influence on the extent of selectivity. As an example system, we study ASD of TiO2 on hydroxylated SiO2 (Si–OH) vs hydrogen-terminated (100) Si (Si–H) using TiCl4/H2O for ALD and WF6/BCl3 for ALE. Using in situ spectroscopic ellipsometry and ex situ x-ray photoelectron spectroscopy, we show that unwanted nucleation can be minimized by limiting the water exposure during the ALD steps. Longer exposures markedly increased the rate of nucleation and growth on the desired non-growth region, thereby degrading selectivity. Specifically, transmission electron microscopy analysis demonstrated that near-saturated H2O doses enabled 32.7 nm thick TiO2 patterns at selectivity threshold S > 0.9 on patterned Si/SiO2 substrates. The correlation between selectivity and reactant exposure serves to increase fundamental insights into the effects of sub-saturated self-limiting surface reactions on the quality and effectiveness of ASD processes and methods.
- 8 September 2020
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 128 (10) , 105302
Effect of reactant dosing on selectivity during area-selective deposition of TiO2 via integrated atomic layer deposition and atomic layer etching
A key hallmark of atomic layer deposition (ALD) is that it proceeds via self-limiting reactions. For a good ALD process, long reactant exposure times beyond that required for saturation on planar substrates can be useful, for example, to achieve conformal growth on high aspect ratio nanoscale trenches, while maintaining consistent deposition across large-area surfaces. Area-selective deposition (ASD) is becoming an enabling process for nanoscale pattern modification on advanced nanoelectronic devices. Herein, we demonstrate that during area-selective ALD, achieved by direct coupling of ALD and thermal atomic layer etching (ALE), excess reactant exposure can have a substantially detrimental influence on the extent of selectivity. As an example system, we study ASD of TiO2 on hydroxylated SiO2 (Si–OH) vs hydrogen-terminated (100) Si (Si–H) using TiCl4/H2O for ALD and WF6/BCl3 for ALE. Using in situ spectroscopic ellipsometry and ex situ x-ray photoelectron spectroscopy, we show that unwanted nucleation can be minimized by limiting the water exposure during the ALD steps. Longer exposures markedly increased the rate of nucleation and growth on the desired non-growth region, thereby degrading selectivity. Specifically, transmission electron microscopy analysis demonstrated that near-saturated H2O doses enabled 32.7 nm thick TiO2 patterns at selectivity threshold S > 0.9 on patterned Si/SiO2 substrates. The correlation between selectivity and reactant exposure serves to increase fundamental insights into the effects of sub-saturated self-limiting surface reactions on the quality and effectiveness of ASD processes and methods.