Suk-Youl Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Suk-Youl Park has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Jeong-Sun Kim
Department of Chemistry, Chonnam National University, Gwangju, 61186, Republic of Korea; Host-Directed Antiviral Research Center, Chonnam National University, Gwangju, 61186, Republic of Korea
7 shared publications - Cheolsoo Eo
Pohang Accelerator Laboratory, Pohang University of Science and Technology, Pohang, Republic of Korea
3 shared publications - Pil Won Seo
Department of Thoracic and Cardiovascular Surgery, Dankook University Hospital, Cheonan, Korea
3 shared publications - Do-Heon Gu
Department of Chemistry, Chonnam National University, Gwangju, Republic of Korea
2 shared publications - Hyeongju Choi
Pohang Accelerator Laboratory, Pohang University of Science and Technology, 80 Jigokro-127-Beongil, Pohang, Nam-gu, Gyeongbuk 37673, Republic of Korea
2 shared publications Ji-Won Kim
Department of Chemistry, Chonnam National University, Gwangju 61186, Republic of Korea
2 shared publications
Latest Publications
- 21 August 2026
- Published by Elsevier in Biochemical and Biophysical Research Communications
- Vol. 834, 154450
Structural landscape of a wide-open TPP: Insights into extreme conformational plasticity and allosteric potential
- 21 August 2026
- Published by Elsevier in Biochemical and Biophysical Research Communications
- Vol. 834, 154450
Structural landscape of a wide-open TPP: Insights into extreme conformational plasticity and allosteric potential
- 12 July 2025
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 93 (12) , 2150-2157
Structural Mimicry Without Glyoxalase I Functional Convergence: A Homogentisate 1,2‐Dioxygenase From Acinetobacter
Homogentisate 1,2‐dioxygenase (HGD) is a non‐heme iron enzyme that plays a crucial role in phenylalanine and tyrosine metabolism. Acinetobacter ‐derived HGD (AcHGD) exhibits structural similarity to glyoxalase I (GLO1) but lacks GLO1 activity. In this study, we analyzed the crystal structure of AcHGD at a resolution of 1.5 Å and investigated the molecular basis for its lack of GLO1 activity using enzymatic assays, isothermal titration calorimetry (ITC), and site‐directed mutagenesis. Metal ion dependency assays revealed that AcHGD exhibits high specificity for Fe 2+ , supporting its role as a non‐heme iron (II)‐dependent dioxygenase. Structural analysis revealed that AcHGD adopts a β‐barrel fold similar to GLO1 and coordinates Zn 2+ through a 2‐His‐1‐carboxylate facial triad. However, its substrate‐binding tunnel is narrower than that of GLO1, preventing the binding of S‐D‐lactoylglutathione, the natural substrate of GLO1. Moreover, introducing GLO1‐like mutations in the active site failed to confer GLO1 activity and instead abolished HGD activity. ITC analysis confirmed that AcHGD binds strongly to homogentisate but does not interact with S‐D‐lactoylglutathione. These findings demonstrate that despite its structural resemblance to GLO1, AcHGD lacks GLO1 activity due to differences in substrate specificity and active site architecture. This study provides insights into the structure–function relationship and evolutionary divergence between HGD and GLO1 enzymes.
- 12 July 2025
- Published by Wiley in Proteins: Structure, Function, and Bioinformatics
- Vol. 93 (12) , 2150-2157
Structural Mimicry Without Glyoxalase I Functional Convergence: A Homogentisate 1,2‐Dioxygenase From Acinetobacter
Homogentisate 1,2‐dioxygenase (HGD) is a non‐heme iron enzyme that plays a crucial role in phenylalanine and tyrosine metabolism. Acinetobacter ‐derived HGD (AcHGD) exhibits structural similarity to glyoxalase I (GLO1) but lacks GLO1 activity. In this study, we analyzed the crystal structure of AcHGD at a resolution of 1.5 Å and investigated the molecular basis for its lack of GLO1 activity using enzymatic assays, isothermal titration calorimetry (ITC), and site‐directed mutagenesis. Metal ion dependency assays revealed that AcHGD exhibits high specificity for Fe 2+ , supporting its role as a non‐heme iron (II)‐dependent dioxygenase. Structural analysis revealed that AcHGD adopts a β‐barrel fold similar to GLO1 and coordinates Zn 2+ through a 2‐His‐1‐carboxylate facial triad. However, its substrate‐binding tunnel is narrower than that of GLO1, preventing the binding of S‐D‐lactoylglutathione, the natural substrate of GLO1. Moreover, introducing GLO1‐like mutations in the active site failed to confer GLO1 activity and instead abolished HGD activity. ITC analysis confirmed that AcHGD binds strongly to homogentisate but does not interact with S‐D‐lactoylglutathione. These findings demonstrate that despite its structural resemblance to GLO1, AcHGD lacks GLO1 activity due to differences in substrate specificity and active site architecture. This study provides insights into the structure–function relationship and evolutionary divergence between HGD and GLO1 enzymes.
- Open Access
- 3 February 2025
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 32 (2) , 315-320
Novel fixed-target serial crystallography flip-holder for macromolecular crystallography beamlines at synchrotron radiation sources
Synchrotron serial crystallography (SSX) is an emerging method for determining crystal structure at room temperature using synchrotron radiation facilities. Despite the various approaches available, reducing sample consumption, removing mother liquid from crystal solution, soaking small molecules for protein–ligand complex structure and prevention of sample dehydration are still challenging problems to be overcome in SSX. Therefore, we have developed a new flip-type fixed-target SSX sample holder for conventional protein crystallography beamlines based on nylon mesh and kapton film. The potential of the flip-holder was evaluated in an SSX experiment with lysozyme crystals at room temperature. About 19600 diffraction images were collected during 40 minutes using a repetition rate of 10 Hz at the 11C beamline of the Pohang Accelerator Laboratory, and the crystal structure of lysozyme was determined at 1.89 Å resolution. This straightforward flip-holder can be used in synchrotron beamlines for routine crystallography.
- 3 February 2025
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 32 (2) , 315-320
Open AccessNovel fixed-target serial crystallography flip-holder for macromolecular crystallography beamlines at synchrotron radiation sources
Synchrotron serial crystallography (SSX) is an emerging method for determining crystal structure at room temperature using synchrotron radiation facilities. Despite the various approaches available, reducing sample consumption, removing mother liquid from crystal solution, soaking small molecules for protein–ligand complex structure and prevention of sample dehydration are still challenging problems to be overcome in SSX. Therefore, we have developed a new flip-type fixed-target SSX sample holder for conventional protein crystallography beamlines based on nylon mesh and kapton film. The potential of the flip-holder was evaluated in an SSX experiment with lysozyme crystals at room temperature. About 19600 diffraction images were collected during 40 minutes using a repetition rate of 10 Hz at the 11C beamline of the Pohang Accelerator Laboratory, and the crystal structure of lysozyme was determined at 1.89 Å resolution. This straightforward flip-holder can be used in synchrotron beamlines for routine crystallography.
- 22 March 2022
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 208, 381-389
Structural features of a minimal intact methyltransferase of a type I restriction-modification system
- 22 March 2022
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 208, 381-389
Structural features of a minimal intact methyltransferase of a type I restriction-modification system
- Open Access
- 1 June 2021
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 28 (4) , 1210-1215
BL-11C Micro-MX: a high-flux microfocus macromolecular-crystallography beamline for micrometre-sized protein crystals at Pohang Light Source II
BL-11C, a new protein crystallography beamline, is an in-vacuum undulator-based microfocus beamline used for macromolecular crystallography at the Pohang Accelerator Laboratory and it was made available to users in June 2017. The beamline is energy tunable in the range 5.0–20 keV to support conventional single- and multi-wavelength anomalous-dispersion experiments against a wide range of heavy metals. At the standard working energy of 12.659 keV, the monochromated beam is focused to 4.1 µm (V) × 8.5 µm (H) full width at half-maximum at the sample position and the measured photon flux is 1.3 × 1012 photons s−1. The experimental station is equipped with a Pilatus3 6M detector, a micro-diffractometer (MD2S) incorporating a multi-axis goniometer, and a robotic sample exchanger (CATS) with a dewar capacity of 90 samples. This beamline is suitable for structural determination of weakly diffracting crystalline substances, such as biomaterials, including protein, nucleic acids and their complexes. In addition, serial crystallography experiments for determining crystal structures at room temperature are possible. Herein, the current beamline characteristics, technical information for users and some recent scientific highlights are described.
- 1 June 2021
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 28 (4) , 1210-1215
Open AccessBL-11C Micro-MX: a high-flux microfocus macromolecular-crystallography beamline for micrometre-sized protein crystals at Pohang Light Source II
BL-11C, a new protein crystallography beamline, is an in-vacuum undulator-based microfocus beamline used for macromolecular crystallography at the Pohang Accelerator Laboratory and it was made available to users in June 2017. The beamline is energy tunable in the range 5.0–20 keV to support conventional single- and multi-wavelength anomalous-dispersion experiments against a wide range of heavy metals. At the standard working energy of 12.659 keV, the monochromated beam is focused to 4.1 µm (V) × 8.5 µm (H) full width at half-maximum at the sample position and the measured photon flux is 1.3 × 1012 photons s−1. The experimental station is equipped with a Pilatus3 6M detector, a micro-diffractometer (MD2S) incorporating a multi-axis goniometer, and a robotic sample exchanger (CATS) with a dewar capacity of 90 samples. This beamline is suitable for structural determination of weakly diffracting crystalline substances, such as biomaterials, including protein, nucleic acids and their complexes. In addition, serial crystallography experiments for determining crystal structures at room temperature are possible. Herein, the current beamline characteristics, technical information for users and some recent scientific highlights are described.
- 14 April 2021
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 77 (5) , 618-627
Crystal structures of UDP-N-acetylmuramic acid L-alanine ligase (MurC) from Mycobacterium bovis with and without UDP-N-acetylglucosamine
Peptidoglycan comprises repeating units of N-acetylmuramic acid, N-acetylglucosamine and short cross-linking peptides. After the conversion of UDP-N-acetylglucosamine (UNAG) to UDP-N-acetylmuramic acid (UNAM) by the MurA and MurB enzymes, an amino acid is added to UNAM by UDP-N-acetylmuramic acid L-alanine ligase (MurC). As peptidoglycan is an essential component of the bacterial cell wall, the enzymes involved in its biosynthesis represent promising targets for the development of novel antibacterial drugs. Here, the crystal structure of Mycobacterium bovis MurC (MbMurC) is reported, which exhibits a three-domain architecture for the binding of UNAM, ATP and an amino acid as substrates, with a nickel ion at the domain interface. The ATP-binding loop adopts a conformation that is not seen in other MurCs. In the UNAG-bound structure of MbMurC, the substrate mimic interacts with the UDP-binding domain of MbMurC, which does not invoke rearrangement of the three domains. Interestingly, the glycine-rich loop of the UDP-binding domain of MbMurC interacts through hydrogen bonds with the glucose moiety of the ligand, but not with the pyrophosphate moiety. These findings suggest that UNAG analogs might serve as potential candidates for neutralizing the catalytic activity of bacterial MurC.
- 14 April 2021
- Published by International Union of Crystallography (IUCr) in Acta Crystallographica Section D Structural Biology
- Vol. 77 (5) , 618-627
Crystal structures of UDP-N-acetylmuramic acid L-alanine ligase (MurC) from Mycobacterium bovis with and without UDP-N-acetylglucosamine
Peptidoglycan comprises repeating units of N-acetylmuramic acid, N-acetylglucosamine and short cross-linking peptides. After the conversion of UDP-N-acetylglucosamine (UNAG) to UDP-N-acetylmuramic acid (UNAM) by the MurA and MurB enzymes, an amino acid is added to UNAM by UDP-N-acetylmuramic acid L-alanine ligase (MurC). As peptidoglycan is an essential component of the bacterial cell wall, the enzymes involved in its biosynthesis represent promising targets for the development of novel antibacterial drugs. Here, the crystal structure of Mycobacterium bovis MurC (MbMurC) is reported, which exhibits a three-domain architecture for the binding of UNAM, ATP and an amino acid as substrates, with a nickel ion at the domain interface. The ATP-binding loop adopts a conformation that is not seen in other MurCs. In the UNAG-bound structure of MbMurC, the substrate mimic interacts with the UDP-binding domain of MbMurC, which does not invoke rearrangement of the three domains. Interestingly, the glycine-rich loop of the UDP-binding domain of MbMurC interacts through hydrogen bonds with the glucose moiety of the ligand, but not with the pyrophosphate moiety. These findings suggest that UNAG analogs might serve as potential candidates for neutralizing the catalytic activity of bacterial MurC.
- Open Access
Fixed-Target Serial Synchrotron Crystallography Using Nylon Mesh and Enclosed Film-Based Sample Holder
Serial crystallography (SX) technique using synchrotron X-ray allows the visualization of room-temperature crystal structures with low-dose data collection as well as time-resolved molecular dynamics. In an SX experiment, delivery of numerous crystals for X-ray interaction, in a serial manner, is very important. Fixed-target scanning approach has the advantage of dramatically minimizing sample consumption as well as any physical damage to crystal sample, compared to other sample delivery methods. Here, we introduce the simple approach of fixed-target serial synchrotron crystallography (FT-SSX) using nylon mesh and enclosed film (NAM)-based sample holder. The NAM-based sample holder consisted of X-ray-transparent nylon-mesh and polyimide film, attached to a magnetic base. This sample holder was mounted to a goniometer head on macromolecular crystallography beamline, and translated along vertical and horizontal directions for raster scanning by the goniometer. Diffraction data were collected in two raster scanning approaches: (i) 100 ms X-ray exposure and 0.011° oscillation at each scan point and (ii) 500 ms X-ray exposure and 0.222° oscillation at each scan point. Using this approach, we determined the room-temperature crystal structures of lysozyme and glucose isomerase at 1.5–2.0 Å resolution. The sample holder produced negligible X-ray background scattering for data processing. Therefore, the new approach provided an opportunity to perform FT-SSX with high accessibility using macromolecular crystallography beamlines at synchrotron without any special equipment.
Open AccessFixed-Target Serial Synchrotron Crystallography Using Nylon Mesh and Enclosed Film-Based Sample Holder
Serial crystallography (SX) technique using synchrotron X-ray allows the visualization of room-temperature crystal structures with low-dose data collection as well as time-resolved molecular dynamics. In an SX experiment, delivery of numerous crystals for X-ray interaction, in a serial manner, is very important. Fixed-target scanning approach has the advantage of dramatically minimizing sample consumption as well as any physical damage to crystal sample, compared to other sample delivery methods. Here, we introduce the simple approach of fixed-target serial synchrotron crystallography (FT-SSX) using nylon mesh and enclosed film (NAM)-based sample holder. The NAM-based sample holder consisted of X-ray-transparent nylon-mesh and polyimide film, attached to a magnetic base. This sample holder was mounted to a goniometer head on macromolecular crystallography beamline, and translated along vertical and horizontal directions for raster scanning by the goniometer. Diffraction data were collected in two raster scanning approaches: (i) 100 ms X-ray exposure and 0.011° oscillation at each scan point and (ii) 500 ms X-ray exposure and 0.222° oscillation at each scan point. Using this approach, we determined the room-temperature crystal structures of lysozyme and glucose isomerase at 1.5–2.0 Å resolution. The sample holder produced negligible X-ray background scattering for data processing. Therefore, the new approach provided an opportunity to perform FT-SSX with high accessibility using macromolecular crystallography beamlines at synchrotron without any special equipment.
- Open Access
- 26 November 2019
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 10, 2755
Characterization of a Dimeric Arginase From Zymomonas mobilis ZM4
Many organisms have genes to protect themselves from toxic conditions such as high ethanol and/or ammonia concentrations. When a high ethanol condition is induced to Zymomonas mobilis ZM4, a representative ethanologenic organism, this bacterium overexpresses several genes to overcome this ethanol stress. Among them, we characterized a gene product annotated as an arginase (zmARG) from Z. mobilis ZM4. Even though all of the arginase-determining sequence motifs are not strictly conserved in zmARG, this enzyme converts L-arginine to urea and L-ornithine in the presence of a divalent manganese ion. The revealed high-resolution crystal structure of zmARG shows that it has a typical globular α/β arginase fold with a protruded C-terminal helix. Two zinc ions reside in the active site, where one metal ion is penta-coordinated and the other has six ligands, discerning this zmARG from the reported arginases with two hexa-liganded metal ions. zmARG forms a dimeric structure in solution as well as in the crystalline state. The dimeric assembly of zmARG is formed mainly by interaction formed between the C-terminal α-helix of one molecule and the α/β hydrolase fold of another molecule. The presented findings demonstrate the first reported dimeric arginase formed by the C-terminal tail and has two metal ions coordinated by different number of ligands.
- 26 November 2019
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 10, 2755
Open AccessCharacterization of a Dimeric Arginase From Zymomonas mobilis ZM4
Many organisms have genes to protect themselves from toxic conditions such as high ethanol and/or ammonia concentrations. When a high ethanol condition is induced to Zymomonas mobilis ZM4, a representative ethanologenic organism, this bacterium overexpresses several genes to overcome this ethanol stress. Among them, we characterized a gene product annotated as an arginase (zmARG) from Z. mobilis ZM4. Even though all of the arginase-determining sequence motifs are not strictly conserved in zmARG, this enzyme converts L-arginine to urea and L-ornithine in the presence of a divalent manganese ion. The revealed high-resolution crystal structure of zmARG shows that it has a typical globular α/β arginase fold with a protruded C-terminal helix. Two zinc ions reside in the active site, where one metal ion is penta-coordinated and the other has six ligands, discerning this zmARG from the reported arginases with two hexa-liganded metal ions. zmARG forms a dimeric structure in solution as well as in the crystalline state. The dimeric assembly of zmARG is formed mainly by interaction formed between the C-terminal α-helix of one molecule and the α/β hydrolase fold of another molecule. The presented findings demonstrate the first reported dimeric arginase formed by the C-terminal tail and has two metal ions coordinated by different number of ligands.