Cleofás Segura-Gómez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cleofás Segura-Gómez has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Pablo Padilla
Department of Signal Theory, Telematics and Communications, Centre for Information and Communication Technologies (CITIC-UGR), University of Granada, Granada, Spain
10 shared publications - Ángel Palomares-Caballero
Department of Signal Theory, Telematics and Communications, Centre for Information and Communication Technologies (CITIC-UGR), University of Granada, Granada, Spain
10 shared publications - Andrés Biedma-Pérez
Department of Signal Theory, Telematics and Communications, Centre for Information and Communication Technologies (CITIC), University of Granada (UGR), Granada, Spain
6 shared publications - José Rico-Fernández
Northern Waves AB, Stockholm, Sweden
3 shared publications - Mingzheng Chen
Department of Communication Systems, KTH Royal Institute of Technology, Stockholm, Sweden
3 shared publications - Oscar Quevedo-Teruel
KTH Royal Institute of Technology
3 shared publications
Latest Publications
- Open Access
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1537-1541
Monolithic Additively Manufactured Broadband Horn Array Antenna in $W$ BandThis letter presents the design, fabrication, and experimental validation of a fully metallic $4\,\times \,4$ horn array antenna operating in the entire $W$-band ($75-110\,$GHz). The array integrates a broadband $1:16$ beamforming network and 16 pyramidal horn elements into a single monolithic structure. The beamforming network is composed of wideband twisters and E-plane power dividers, which are compatible with the metal-only additive manufacturing (AM) technique called laser powder-bed fusion (LPBF). The simulation and measurement results confirm a reflection coefficient below $-12\,$dB in a 37.8% relative bandwidth, with a measured realized gain exceeding $21\,$dBi across the band. The array achieves an aperture efficiency of approximately 80% (calculated using realized gain) while maintaining sidelobe levels below $-10\,$dB.
- 28 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1537-1541
Open AccessMonolithic Additively Manufactured Broadband Horn Array Antenna in $W$ BandThis letter presents the design, fabrication, and experimental validation of a fully metallic $4\,\times \,4$ horn array antenna operating in the entire $W$-band ($75-110\,$GHz). The array integrates a broadband $1:16$ beamforming network and 16 pyramidal horn elements into a single monolithic structure. The beamforming network is composed of wideband twisters and E-plane power dividers, which are compatible with the metal-only additive manufacturing (AM) technique called laser powder-bed fusion (LPBF). The simulation and measurement results confirm a reflection coefficient below $-12\,$dB in a 37.8% relative bandwidth, with a measured realized gain exceeding $21\,$dBi across the band. The array achieves an aperture efficiency of approximately 80% (calculated using realized gain) while maintaining sidelobe levels below $-10\,$dB.
- Open Access
- 20 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 16 (3) , 296-306
A Sub-THz Low-Cost Additive Manufactured Monolithic Geodesic H-Plane Horn Array Antenna
A monolithic geodesic H-plane horn array antenna that operates up to 170 GHz is achieved for the first time using a low-cost additive manufacturing (AM) technique. To reach high gain and symmetric beam, a truncated geodesic H-plane horn is used to obtain a narrow beam in the H-plane, while a 1:8 power divider built on parallel-plate waveguides is constructed to narrow the beam in the E-plane. A ray-tracing and physical-optics model is developed to facilitate the design, which is capable of computing the full radiation pattern, directivity, and gain (considering conductive losses) of geodesic H-plane horn array antennas with significant time efficiency and high degree of accuracy. The adopted metal-only laser powder–bed fusion AM technique is especially suitable for fast prototyping structures with intricate shapes at a low cost. However, special adaptations are still considered in the design to ensure a successful fabrication of the prototype operating at the D-band. The prototype maintains good frequency stability from 110 to 170 GHz with a return loss better than 10 dB and a symmetric pencil beam. The measured data show a maximum realized gain of 29 dBi, a maximum aperture efficiency of 67% (calculated using realized gain), and a maximum radiation efficiency of 86%.
- 20 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 16 (3) , 296-306
Open AccessA Sub-THz Low-Cost Additive Manufactured Monolithic Geodesic H-Plane Horn Array Antenna
A monolithic geodesic H-plane horn array antenna that operates up to 170 GHz is achieved for the first time using a low-cost additive manufacturing (AM) technique. To reach high gain and symmetric beam, a truncated geodesic H-plane horn is used to obtain a narrow beam in the H-plane, while a 1:8 power divider built on parallel-plate waveguides is constructed to narrow the beam in the E-plane. A ray-tracing and physical-optics model is developed to facilitate the design, which is capable of computing the full radiation pattern, directivity, and gain (considering conductive losses) of geodesic H-plane horn array antennas with significant time efficiency and high degree of accuracy. The adopted metal-only laser powder–bed fusion AM technique is especially suitable for fast prototyping structures with intricate shapes at a low cost. However, special adaptations are still considered in the design to ensure a successful fabrication of the prototype operating at the D-band. The prototype maintains good frequency stability from 110 to 170 GHz with a return loss better than 10 dB and a symmetric pencil beam. The measured data show a maximum realized gain of 29 dBi, a maximum aperture efficiency of 67% (calculated using realized gain), and a maximum radiation efficiency of 86%.
- Open Access
- 3 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 114901-114910
Compact H-Plane CLAF-SIW Horn Antenna With Phase Front Correction
This work presents an H-plane contactless air-filled substrate-integrated waveguide (CLAF-SIW) horn antenna, whose directivity is enhanced by incorporating a metalens along the horn flaring. By tuning the distribution of the unit cells of the metalens, it is possible to reduce phase errors at the aperture, a common issue in horn antennas. The unit cell of the metalens is designed by using a metallic patch on a substrate-integrated hole. By varying the size of the metal patches, different refraction indices can be tuned, resulting in a wideband performance. An analysis of the distribution of these unit cells along the horn antenna is conducted to achieve the desired equivalent effective refraction index through the metalens. The directivity achieved is comparable to that of a horn antenna with optimal dimensions, but with a 41% reduction in length. The measured results demonstrate an impedance bandwidth below −10 dB from 32.8 to 50 GHz, with a realized gain above 9.3 dBi.
- 3 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 114901-114910
Open AccessCompact H-Plane CLAF-SIW Horn Antenna With Phase Front Correction
This work presents an H-plane contactless air-filled substrate-integrated waveguide (CLAF-SIW) horn antenna, whose directivity is enhanced by incorporating a metalens along the horn flaring. By tuning the distribution of the unit cells of the metalens, it is possible to reduce phase errors at the aperture, a common issue in horn antennas. The unit cell of the metalens is designed by using a metallic patch on a substrate-integrated hole. By varying the size of the metal patches, different refraction indices can be tuned, resulting in a wideband performance. An analysis of the distribution of these unit cells along the horn antenna is conducted to achieve the desired equivalent effective refraction index through the metalens. The directivity achieved is comparable to that of a horn antenna with optimal dimensions, but with a 41% reduction in length. The measured results demonstrate an impedance bandwidth below −10 dB from 32.8 to 50 GHz, with a realized gain above 9.3 dBi.
- Open Access
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (9) , 3183-3187
Substrate Integrated Monopulse Leaky Horn Antenna
This paper presents a leaky horn antenna based on a substrate integrated waveguide (SIW) with monopulse performance. The proposed leaky horn antenna consists of two SIW leaky-wave antennas (LWAs) angularly separated to form the horn's flaring. By properly designing this angular separation taking into account the main radiation direction of both LWAs, a flat wavefront is achieved in the leaky horn aperture. To provide the monopulse behavior to the SIW leaky horn, a hybrid coupler, and phase shifters are included in the feeding. Depending on the input port chosen on the hybrid coupler, the LWAs forming the leaky horn are fed in phase or counter-phase and generate the sum and difference radiation patterns. A prototype has been fabricated to validate the design. In the operating band, an impedance matching below −13.9 dB is achieved at both input ports with an isolation between ports better than 16.6 dB. The measured radiation patterns show a monopulse behavior with a proper agreement with the simulated results. The proposed leaky horn presents a depth of −25.8 dB (difference between the sum diagram and the difference in the boresight axis), a peak realized gain of 12.9 dBi, and a half-power beamwidth of 6.4° at 27.5 GHz.
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (9) , 3183-3187
Open AccessSubstrate Integrated Monopulse Leaky Horn Antenna
This paper presents a leaky horn antenna based on a substrate integrated waveguide (SIW) with monopulse performance. The proposed leaky horn antenna consists of two SIW leaky-wave antennas (LWAs) angularly separated to form the horn's flaring. By properly designing this angular separation taking into account the main radiation direction of both LWAs, a flat wavefront is achieved in the leaky horn aperture. To provide the monopulse behavior to the SIW leaky horn, a hybrid coupler, and phase shifters are included in the feeding. Depending on the input port chosen on the hybrid coupler, the LWAs forming the leaky horn are fed in phase or counter-phase and generate the sum and difference radiation patterns. A prototype has been fabricated to validate the design. In the operating band, an impedance matching below −13.9 dB is achieved at both input ports with an isolation between ports better than 16.6 dB. The measured radiation patterns show a monopulse behavior with a proper agreement with the simulated results. The proposed leaky horn presents a depth of −25.8 dB (difference between the sum diagram and the difference in the boresight axis), a peak realized gain of 12.9 dBi, and a half-power beamwidth of 6.4° at 27.5 GHz.
- Open Access
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 4363-4367
$W$-Band Compact and Lightweight Additively Manufactured Geodesic H-Plane Horn Antenna
A compact and lightweight geodesic H-plane horn antenna is designed and experimentally validated in the $W$-band. Two corners in the aperture of the horn are truncated to increase aperture efficiency and reduce the weight and volume of the antenna. The prototype was monolithically printed in AlSi10Mg through laser powder-bed fusion additive manufacturing, resulting in a weight of only 14 g. The prototype maintains good frequency stability from 75 to 110 GHz, with sidelobe levels lower than $-25$ dB and return loss better than 15 dB. The measured data show a realized gain of 20 dBi with an aperture efficiency of around 60% (calculated using realized gain) and an estimated radiation efficiency of better than 70%.
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (11) , 4363-4367
Open Access$W$-Band Compact and Lightweight Additively Manufactured Geodesic H-Plane Horn Antenna
A compact and lightweight geodesic H-plane horn antenna is designed and experimentally validated in the $W$-band. Two corners in the aperture of the horn are truncated to increase aperture efficiency and reduce the weight and volume of the antenna. The prototype was monolithically printed in AlSi10Mg through laser powder-bed fusion additive manufacturing, resulting in a weight of only 14 g. The prototype maintains good frequency stability from 75 to 110 GHz, with sidelobe levels lower than $-25$ dB and return loss better than 15 dB. The measured data show a realized gain of 20 dBi with an aperture efficiency of around 60% (calculated using realized gain) and an estimated radiation efficiency of better than 70%.
- Open Access
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Substrate Integrated Monopulse Leaky Horn Antenna
This paper presents a leaky horn antenna based on a substrate integrated waveguide (SIW) with monopulse performance. The proposed leaky horn antenna consists of two SIW leaky-wave antennas (LWAs) angularly separated to form the horn's flaring. By properly designing this angular separation taking into account the main radiation direction of both LWAs, a flat wavefront is achieved in the leaky horn aperture. To provide the monopulse behavior to the SIW leaky horn, a hybrid coupler, and phase shifters are included in the feeding. Depending on the input port chosen on the hybrid coupler, the LWAs forming the leaky horn are fed in phase or counter-phase and generate the sum and difference radiation patterns. A prototype has been fabricated to validate the design. In the operating band, an impedance matching below -13.9 dB is achieved at both input ports with an isolation between ports better than 16.6 dB. The measured radiation patterns show a monopulse behavior with a proper agreement with the simulated results. The proposed leaky horn presents a depth of -25.8 dB (difference between the sum diagram and the difference in the boresight axis), a peak realized gain of 12.9 dBi, and a half-power beamwidth of 6.4º at 27.5 GHz.
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessSubstrate Integrated Monopulse Leaky Horn Antenna
This paper presents a leaky horn antenna based on a substrate integrated waveguide (SIW) with monopulse performance. The proposed leaky horn antenna consists of two SIW leaky-wave antennas (LWAs) angularly separated to form the horn's flaring. By properly designing this angular separation taking into account the main radiation direction of both LWAs, a flat wavefront is achieved in the leaky horn aperture. To provide the monopulse behavior to the SIW leaky horn, a hybrid coupler, and phase shifters are included in the feeding. Depending on the input port chosen on the hybrid coupler, the LWAs forming the leaky horn are fed in phase or counter-phase and generate the sum and difference radiation patterns. A prototype has been fabricated to validate the design. In the operating band, an impedance matching below -13.9 dB is achieved at both input ports with an isolation between ports better than 16.6 dB. The measured radiation patterns show a monopulse behavior with a proper agreement with the simulated results. The proposed leaky horn presents a depth of -25.8 dB (difference between the sum diagram and the difference in the boresight axis), a peak realized gain of 12.9 dBi, and a half-power beamwidth of 6.4º at 27.5 GHz.
- Open Access
- 22 February 2025
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 193
Cavity-stacked filter in CLAF-SIW technology for millimeter waves
- 22 February 2025
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 193
Open AccessCavity-stacked filter in CLAF-SIW technology for millimeter waves
- Open Access
- 11 May 2024
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 179
Contactless AF-SIW phase shifters based on periodic structures at mmWaves
- 11 May 2024
- Published by Elsevier in AEU - International Journal of Electronics and Communications
- Vol. 179
Open AccessContactless AF-SIW phase shifters based on periodic structures at mmWaves
- Open Access
- 17 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Holey SIW Horn Antenna Based on an H-plane Lens-wise Wavefront Collimation
This paper presents an H-plane SIW horn antenna whose directivity is enhanced using holey unit cells along the horn flaring. By wisely drilling the horn antenna, it is possible to reduce the phase error in the aperture which is a common problem in horn antennas if the optimum dimensions are not employed. An analysis of the distribution of the unit cells along the horn antenna has been carried out to achieve the desired equivalent refractive indices. By changing the hole radius, different equivalent refractive indices can be tuned with a wideband performance. This fact enables the implementation of a collimation zone inside the horn antenna which transforms the pseudo-circular wavefront into a quasi-planar one in the radiating aperture. The produced directivity is similar to the horn antenna with the optimum dimensions but a longitudinal reduction of 53.7% and a higher realized gain are achieved. A holey SIW horn antenna is designed and manufactured. The measured results show an impedance bandwidth performance below -10 dB from 34.3 GHz to 44.5 GHz (25.9%) with a realized gain above 10 dBi. The gain difference regarding a SIW horn antenna without the collimation zone is about 2-3 dBi in the operating frequency range.
- 17 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessHoley SIW Horn Antenna Based on an H-plane Lens-wise Wavefront Collimation
This paper presents an H-plane SIW horn antenna whose directivity is enhanced using holey unit cells along the horn flaring. By wisely drilling the horn antenna, it is possible to reduce the phase error in the aperture which is a common problem in horn antennas if the optimum dimensions are not employed. An analysis of the distribution of the unit cells along the horn antenna has been carried out to achieve the desired equivalent refractive indices. By changing the hole radius, different equivalent refractive indices can be tuned with a wideband performance. This fact enables the implementation of a collimation zone inside the horn antenna which transforms the pseudo-circular wavefront into a quasi-planar one in the radiating aperture. The produced directivity is similar to the horn antenna with the optimum dimensions but a longitudinal reduction of 53.7% and a higher realized gain are achieved. A holey SIW horn antenna is designed and manufactured. The measured results show an impedance bandwidth performance below -10 dB from 34.3 GHz to 44.5 GHz (25.9%) with a realized gain above 10 dBi. The gain difference regarding a SIW horn antenna without the collimation zone is about 2-3 dBi in the operating frequency range.
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (1) , 1023-1028
Holey SIW Horn Antenna Based on an H-Plane Lenswise Wavefront Collimation
This paper presents an H-plane SIW horn antenna whose directivity is enhanced using holey unit cells along the horn flaring. By wisely drilling the horn antenna, it is possible to reduce the phase error in the aperture which is a common problem in horn antennas if the optimum dimensions are not employed. An analysis of the distribution of the unit cells along the horn antenna has been carried out to achieve the desired equivalent refractive indices. By changing the hole radius, different equivalent refractive indices can be tuned with a wideband performance. This fact enables the implementation of a collimation zone inside the horn antenna which transforms the pseudo-circular wavefront into a quasi-planar one in the radiating aperture. The produced directivity is similar to the horn antenna with the optimum dimensions but a longitudinal reduction of 53.7% and a higher realized gain are achieved. A holey SIW horn antenna is designed and manufactured. The measured results show an impedance bandwidth performance below -10 dB from 34.3 GHz to 44.5 GHz (25.9%) with a realized gain above 10 dBi. The gain difference regarding a SIW horn antenna without the collimation zone is about 2-3 dBi in the operating frequency range.
- 5 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (1) , 1023-1028
Holey SIW Horn Antenna Based on an H-Plane Lenswise Wavefront Collimation
This paper presents an H-plane SIW horn antenna whose directivity is enhanced using holey unit cells along the horn flaring. By wisely drilling the horn antenna, it is possible to reduce the phase error in the aperture which is a common problem in horn antennas if the optimum dimensions are not employed. An analysis of the distribution of the unit cells along the horn antenna has been carried out to achieve the desired equivalent refractive indices. By changing the hole radius, different equivalent refractive indices can be tuned with a wideband performance. This fact enables the implementation of a collimation zone inside the horn antenna which transforms the pseudo-circular wavefront into a quasi-planar one in the radiating aperture. The produced directivity is similar to the horn antenna with the optimum dimensions but a longitudinal reduction of 53.7% and a higher realized gain are achieved. A holey SIW horn antenna is designed and manufactured. The measured results show an impedance bandwidth performance below -10 dB from 34.3 GHz to 44.5 GHz (25.9%) with a realized gain above 10 dBi. The gain difference regarding a SIW horn antenna without the collimation zone is about 2-3 dBi in the operating frequency range.