Theoni Maria Massara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Theoni Maria Massara has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Alper Erdem Yilmaz
Department of Environmental Engineering, Faculty of Engineering, Atatürk University, Erzurum, Turkey
1 shared publication - Evina Katsou
Department of Civil & Environmental Engineering, Institute of Environment, Health and Societies, Brunel University London, Uxbridge Campus, Middlesex, Uxbridge UB8 3PH, UK
1 shared publication - Okan Tarık Komesli
Department of Environmental Engineering, Atatürk University, Erzurum, Turkey
1 shared publication - Onur Sözüdoğru
Department of Environmental Engineering, Faculty of Engineering Sivas Cumhuriyet University Sivas Türkiye
1 shared publication Savaş Çalik
Public Health Laboratory, Erzurum, Turkey
1 shared publication- Sezgin Bakırdere
Faculty of Art and Science, Department of Chemistry, Yıldız Technical University, İstanbul, Türkiye
1 shared publication
Latest Publications
- 10 September 2020
- Published by Taylor & Francis in Analytical Letters
- Vol. 54 (10) , 1616-1626
Removal of Heavy Metals by a Membrane Bioreactor Combined with Activated Carbon
The removal of nickel, lead, arsenic, and zinc was investigated by a lab-scale submerged membrane bioreactor (MBR) combined with granular activated carbon (GAC). Membrane fluxes of 16 L m−2 h−1, 20 L m−2 h−1, and 24 L m−2 h−1 with corresponding hydraulic retention times (HRTs) of 12.8 h, 10.4 h, and 9.2 h were applied as variables to examine their influence upon the removal efficiency. Synthetically prepared wastewater was pretreated in the MBR and GAC adsorption was employed as the post-treatment. Under the lowest applied flux value or, equivalently, the highest HRT applied, chemical oxygen demand (COD), ammonium (NH4-N) and phosphate (PO4-P) removals were found to be the highest (96.8%, 98.9% and 46%, respectively) for the MBR effluent. These results may be considered to be the result of alleviated membrane fouling and greater biomass growth. The highest heavy metal removal efficiency after the first treatment stage (i.e. the MBR effluent) was obtained at the lowest flux value of 16 L m−2 h−1. Ni, Pb, Zn, and As removals were measured to be equal to 96.9%, 98.3%, 98% and 8.5%, respectively. More important, the heavy metal concentrations were below the limit of detection after the GAC post-treatment; over 99% removal was achieved for all heavy metals. The adsorption of heavy metal ions onto the GAC may minimize biomass exposure to their toxicity, thereby creating the conditions for further improved MBR-GAC system performance. Coupling MBR technology with GAC adsorption seems a promising option for the effective treatment of wastewater containing heavy metals.
- 10 September 2020
- Published by Taylor & Francis in Analytical Letters
- Vol. 54 (10) , 1616-1626
Removal of Heavy Metals by a Membrane Bioreactor Combined with Activated Carbon
The removal of nickel, lead, arsenic, and zinc was investigated by a lab-scale submerged membrane bioreactor (MBR) combined with granular activated carbon (GAC). Membrane fluxes of 16 L m−2 h−1, 20 L m−2 h−1, and 24 L m−2 h−1 with corresponding hydraulic retention times (HRTs) of 12.8 h, 10.4 h, and 9.2 h were applied as variables to examine their influence upon the removal efficiency. Synthetically prepared wastewater was pretreated in the MBR and GAC adsorption was employed as the post-treatment. Under the lowest applied flux value or, equivalently, the highest HRT applied, chemical oxygen demand (COD), ammonium (NH4-N) and phosphate (PO4-P) removals were found to be the highest (96.8%, 98.9% and 46%, respectively) for the MBR effluent. These results may be considered to be the result of alleviated membrane fouling and greater biomass growth. The highest heavy metal removal efficiency after the first treatment stage (i.e. the MBR effluent) was obtained at the lowest flux value of 16 L m−2 h−1. Ni, Pb, Zn, and As removals were measured to be equal to 96.9%, 98.3%, 98% and 8.5%, respectively. More important, the heavy metal concentrations were below the limit of detection after the GAC post-treatment; over 99% removal was achieved for all heavy metals. The adsorption of heavy metal ions onto the GAC may minimize biomass exposure to their toxicity, thereby creating the conditions for further improved MBR-GAC system performance. Coupling MBR technology with GAC adsorption seems a promising option for the effective treatment of wastewater containing heavy metals.