Damion T. Dixon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Damion T. Dixon has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Cheryl T. Gomillion
School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, GA 30602, USA
4 shared publications - Melissa Ann Grunlan
Texas A&M University
2 shared publications Ainsley G. Shields
Department of Biomedical Engineering
1 shared publicationDarian K. Kanu
Department of Materials Science and Engineering Texas A&M University College Station Texas USA
1 shared publicationErika N. Landree
School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States
1 shared publication- Erika N. Landree
School of Chemical, Materials and Biomedical Engineering, University of Georgia, Athens, GA 30602, USA
1 shared publication
Latest Publications
- Open Access
- 2 June 2026
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 311 (6)
PCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity
“Self‐fitting” shape memory polymer (SMP) scaffolds based on cross‐linked poly(ε‐caprolactone)‐diacrylate (PCL‐DA) represent a promising regenerative strategy for treating irregular craniomaxillofacial bone defects. Beyond conformal fitting, such scaffolds should exhibit intrinsic bioactivity as well as controlled and robust degradation rates. In prior reports, chitosan (CS) and 45S5 Bioglass (BG) were separately incorporated to form SMP scaffolds. “CS‐only” hybrid scaffolds suppressed fungal biofilm formation and accelerated degradation, whereas “BG‐only” composite scaffolds induced hydroxyapatite (HAp) mineralization and also accelerated degradation. Herein, “hybrid composite” scaffolds incorporating both CS and BG were developed. Semi‐interpenetrating networks were fabricated using PCL‐DA and CS‐ graft ‐PCL at 90:10 and 75:25 wt% ratios, corresponding to 1 and 2.5 wt% CS, respectively. BG was introduced at 5 and 10 wt%, and localized on the pore walls. These scaffolds retained excellent shape memory behavior despite a reduction in PCL crystallinity. Degradation was faster versus corresponding BG‐only and CS‐only scaffolds, and robust HAp mineralization was observed after just 1 day in 1X simulated body fluid. The hybrid composite scaffolds were mechanically robust, and HAp mineralization induced a substantial increase in modulus.
- 2 June 2026
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 311 (6)
Open AccessPCL/Chitosan/Bioglass Hybrid Composite Shape Memory Scaffolds With Accelerated Degradation and Enhanced Bioactivity
“Self‐fitting” shape memory polymer (SMP) scaffolds based on cross‐linked poly(ε‐caprolactone)‐diacrylate (PCL‐DA) represent a promising regenerative strategy for treating irregular craniomaxillofacial bone defects. Beyond conformal fitting, such scaffolds should exhibit intrinsic bioactivity as well as controlled and robust degradation rates. In prior reports, chitosan (CS) and 45S5 Bioglass (BG) were separately incorporated to form SMP scaffolds. “CS‐only” hybrid scaffolds suppressed fungal biofilm formation and accelerated degradation, whereas “BG‐only” composite scaffolds induced hydroxyapatite (HAp) mineralization and also accelerated degradation. Herein, “hybrid composite” scaffolds incorporating both CS and BG were developed. Semi‐interpenetrating networks were fabricated using PCL‐DA and CS‐ graft ‐PCL at 90:10 and 75:25 wt% ratios, corresponding to 1 and 2.5 wt% CS, respectively. BG was introduced at 5 and 10 wt%, and localized on the pore walls. These scaffolds retained excellent shape memory behavior despite a reduction in PCL crystallinity. Degradation was faster versus corresponding BG‐only and CS‐only scaffolds, and robust HAp mineralization was observed after just 1 day in 1X simulated body fluid. The hybrid composite scaffolds were mechanically robust, and HAp mineralization induced a substantial increase in modulus.
- Open Access
- 8 September 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (9) , 598
Biomimetic Dual-Sensing Bone Scaffolds: Characterization and In Vitro Evaluation Under Dynamic Culturing Conditions
The regeneration of large segmental bone defects remains a significant challenge. While electrical stimulation has demonstrated the potential to accelerate bone healing, clinical translation has been hindered by the lack of safe, localized delivery methods. In this study, we present a novel strategy combining piezoelectric and electrically conductive polymers with allograft demineralized bones to create stimuli-responsive, biologically relevant scaffolds via pneumatic 3D printing. These scaffolds exhibit enhanced piezoelectric potential and tunable electrical properties, enabling both electrical and mechanical stimulation of cells (without external stimulators). Under dynamic culturing conditions (i.e., ultrasound stimulation), human bone marrow-derived mesenchymal stromal cells cultured on these scaffolds displayed significantly elevated osteogenic protein expression (i.e., alkaline phosphatase and osteocalcin) and mineralization (confirmed via xylenol orange mineral staining) after two weeks. This work introduces a bioinspired, printable ink in conjunction with a simple fabrication approach for creating dual-responsive scaffolds with high potential for functional bone tissue regeneration.
- 8 September 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (9) , 598
Open AccessBiomimetic Dual-Sensing Bone Scaffolds: Characterization and In Vitro Evaluation Under Dynamic Culturing Conditions
The regeneration of large segmental bone defects remains a significant challenge. While electrical stimulation has demonstrated the potential to accelerate bone healing, clinical translation has been hindered by the lack of safe, localized delivery methods. In this study, we present a novel strategy combining piezoelectric and electrically conductive polymers with allograft demineralized bones to create stimuli-responsive, biologically relevant scaffolds via pneumatic 3D printing. These scaffolds exhibit enhanced piezoelectric potential and tunable electrical properties, enabling both electrical and mechanical stimulation of cells (without external stimulators). Under dynamic culturing conditions (i.e., ultrasound stimulation), human bone marrow-derived mesenchymal stromal cells cultured on these scaffolds displayed significantly elevated osteogenic protein expression (i.e., alkaline phosphatase and osteocalcin) and mineralization (confirmed via xylenol orange mineral staining) after two weeks. This work introduces a bioinspired, printable ink in conjunction with a simple fabrication approach for creating dual-responsive scaffolds with high potential for functional bone tissue regeneration.
- Open Access
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 11 (9) , 5627-5637
Hybrid Chitosan/PCL Shape Memory Scaffolds with Potential for Bone Regeneration and Infection Resistance
We have previously developed a regenerative engineering approach to repair irregularly shaped craniomaxillofacial bone defects utilizing "self-fitting" shape memory polymer (SMP) scaffolds based on cross-linked poly(ε-caprolactone) (PCL). However, a slow rate of degradation may hinder neotissue infiltration, and a lack of innate antimicrobial activity creates vulnerability to postoperative infection stemming from biofilm formation. Introduction of chitosan (CS), a hydrophilic natural polymer with known antimicrobial behavior, to PCL SMP scaffolds could provide a synergistic combination of desirable properties. Herein, for the first time, we report the development of hybrid (i.e., formed from a synthetic and a naturally derived polymer) CS/PCL SMP scaffolds. A series of eight highly porous PCL/CS-graft-PCL scaffolds were formed as semi-interpenetrating networks (semi-IPNs) using cross-linkable PCL-diacrylate (PCL-DA) and thermoplastic CS-graft-PCL copolymers. Scaffold CS content was tuned by graft copolymer composition and wt % ratio to PCL-DA. A solvent-cast particulate leaching process produced scaffolds with highly interconnected macropores (∼240 μm), which is conducive to osteogenesis. Owing to sufficient retention of PCL crystallinity, all hybrid scaffolds retained excellent shape memory and robust mechanical behavior. Compared with PCL scaffold controls, hybrid scaffolds of sufficient CS content exhibited faster rates of in vitro degradation, which is favorable to osteoinductivity. Accelerated degradation was related to increased hydrophilicity and phase separation effects. Hybrid scaffolds also displayed an ability to reduce C. albicans biofilm formation by both direct and indirect contact, compared with PCL scaffolds.
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 11 (9) , 5627-5637
Open AccessHybrid Chitosan/PCL Shape Memory Scaffolds with Potential for Bone Regeneration and Infection Resistance
We have previously developed a regenerative engineering approach to repair irregularly shaped craniomaxillofacial bone defects utilizing "self-fitting" shape memory polymer (SMP) scaffolds based on cross-linked poly(ε-caprolactone) (PCL). However, a slow rate of degradation may hinder neotissue infiltration, and a lack of innate antimicrobial activity creates vulnerability to postoperative infection stemming from biofilm formation. Introduction of chitosan (CS), a hydrophilic natural polymer with known antimicrobial behavior, to PCL SMP scaffolds could provide a synergistic combination of desirable properties. Herein, for the first time, we report the development of hybrid (i.e., formed from a synthetic and a naturally derived polymer) CS/PCL SMP scaffolds. A series of eight highly porous PCL/CS-graft-PCL scaffolds were formed as semi-interpenetrating networks (semi-IPNs) using cross-linkable PCL-diacrylate (PCL-DA) and thermoplastic CS-graft-PCL copolymers. Scaffold CS content was tuned by graft copolymer composition and wt % ratio to PCL-DA. A solvent-cast particulate leaching process produced scaffolds with highly interconnected macropores (∼240 μm), which is conducive to osteogenesis. Owing to sufficient retention of PCL crystallinity, all hybrid scaffolds retained excellent shape memory and robust mechanical behavior. Compared with PCL scaffold controls, hybrid scaffolds of sufficient CS content exhibited faster rates of in vitro degradation, which is favorable to osteoinductivity. Accelerated degradation was related to increased hydrophilicity and phase separation effects. Hybrid scaffolds also displayed an ability to reduce C. albicans biofilm formation by both direct and indirect contact, compared with PCL scaffolds.
- Open Access
- 21 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (7) , 4366-4378
3D-Printed Demineralized Bone Matrix-Based Conductive Scaffolds Combined with Electrical Stimulation for Bone Tissue Engineering Applications
Bone is remodeled through a dynamic process facilitated by biophysical cues that support cellular signaling. In healthy bone, signaling pathways are regulated by cells and the extracellular matrix and transmitted via electrical synapses. To this end, combining electrical stimulation (ES) with conductive scaffolding is a promising approach for repairing damaged bone tissue. Therefore, "smart" biomaterials that can provide multifunctionality and facilitate the transfer of electrical cues directly to cells have become increasingly more studied in bone tissue engineering. Herein, 3D-printed electrically conductive composite scaffolds consisting of demineralized bone matrix (DBM) and polycaprolactone (PCL), in combination with ES, for bone regeneration were evaluated for the first time. The conductive composite scaffolds were fabricated and characterized by evaluating mechanical, surface, and electrical properties. The DBM/PCL composites exhibited a higher compressive modulus (107.2 MPa) than that of pristine PCL (62.02 MPa), as well as improved surface properties (i.e., roughness). Scaffold electrical properties were also tuned, with sheet resistance values as low as 4.77 × 105 Ω/sq for our experimental coating of the highest dilution (i.e., 20%). Furthermore, the biocompatibility and osteogenic potential of the conductive composite scaffolds were tested using human mesenchymal stromal cells (hMSCs) both with and without exogenous ES (100 mV/mm for 5 min/day four times/week). In conjunction with ES, the osteogenic differentiation of hMSCs grown on conductive DBM/PCL composite scaffolds was significantly enhanced when compared to those cultured on PCL-only and nonconductive DBM/PCL control scaffolds, as determined through xylenol orange mineral staining and osteogenic protein analysis. Overall, these promising results suggest the potential of this approach for the development of biomimetic hybrid scaffolds for bone tissue engineering applications.
- 21 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (7) , 4366-4378
Open Access3D-Printed Demineralized Bone Matrix-Based Conductive Scaffolds Combined with Electrical Stimulation for Bone Tissue Engineering Applications
Bone is remodeled through a dynamic process facilitated by biophysical cues that support cellular signaling. In healthy bone, signaling pathways are regulated by cells and the extracellular matrix and transmitted via electrical synapses. To this end, combining electrical stimulation (ES) with conductive scaffolding is a promising approach for repairing damaged bone tissue. Therefore, "smart" biomaterials that can provide multifunctionality and facilitate the transfer of electrical cues directly to cells have become increasingly more studied in bone tissue engineering. Herein, 3D-printed electrically conductive composite scaffolds consisting of demineralized bone matrix (DBM) and polycaprolactone (PCL), in combination with ES, for bone regeneration were evaluated for the first time. The conductive composite scaffolds were fabricated and characterized by evaluating mechanical, surface, and electrical properties. The DBM/PCL composites exhibited a higher compressive modulus (107.2 MPa) than that of pristine PCL (62.02 MPa), as well as improved surface properties (i.e., roughness). Scaffold electrical properties were also tuned, with sheet resistance values as low as 4.77 × 105 Ω/sq for our experimental coating of the highest dilution (i.e., 20%). Furthermore, the biocompatibility and osteogenic potential of the conductive composite scaffolds were tested using human mesenchymal stromal cells (hMSCs) both with and without exogenous ES (100 mV/mm for 5 min/day four times/week). In conjunction with ES, the osteogenic differentiation of hMSCs grown on conductive DBM/PCL composite scaffolds was significantly enhanced when compared to those cultured on PCL-only and nonconductive DBM/PCL control scaffolds, as determined through xylenol orange mineral staining and osteogenic protein analysis. Overall, these promising results suggest the potential of this approach for the development of biomimetic hybrid scaffolds for bone tissue engineering applications.
- Open Access
- 24 February 2023
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 111 (7) , 1351-1364
3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration
Various methods have been used to treat bone defects caused by genetic disorders, injury, or disease. Yet, there is still great need to develop alternative approaches to repair damaged bone tissue. Bones naturally exhibit piezoelectric potential, or the ability to convert mechanical stresses into electrical impulses. This phenomenon has been utilized clinically to enhance bone regeneration in conjunction with electrical stimulation (ES) therapies; however, oftentimes with critical‐sized bone defects, the bioelectric potential at the site of injury is compromised, resulting in less desirable outcomes. In the present study, the potential of a 3D‐printed conductive polymer blend to enhance bone formation through restoration of the bioelectrical microenvironment was evaluated. A commercially available 3D printer was used to create circular, thin‐film scaffolds consisting of either polylactide (PLA) or a conductive PLA (CPLA) composite. Preosteoblast cells were seeded onto the scaffolds and subjected to direct current ES via a purpose‐built cell culture chamber. It was found that CPLA scaffolds had no adverse effects on cell viability, proliferation or differentiation when compared with control scaffolds. The addition of ES, however, resulted in a significant increase in the expression of osteocalcin, a protein indicative of osteoblast maturation, after 14 days of culture. Furthermore, xylenol orange staining also showed the presence of increased mineralized calcium nodules in cultures undergoing stimulation. This study demonstrates the potential for low‐cost, conductive scaffolding materials to support cell viability and enhance in vitro mineralization in conjunction with ES.
- 24 February 2023
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 111 (7) , 1351-1364
Open Access3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration
Various methods have been used to treat bone defects caused by genetic disorders, injury, or disease. Yet, there is still great need to develop alternative approaches to repair damaged bone tissue. Bones naturally exhibit piezoelectric potential, or the ability to convert mechanical stresses into electrical impulses. This phenomenon has been utilized clinically to enhance bone regeneration in conjunction with electrical stimulation (ES) therapies; however, oftentimes with critical‐sized bone defects, the bioelectric potential at the site of injury is compromised, resulting in less desirable outcomes. In the present study, the potential of a 3D‐printed conductive polymer blend to enhance bone formation through restoration of the bioelectrical microenvironment was evaluated. A commercially available 3D printer was used to create circular, thin‐film scaffolds consisting of either polylactide (PLA) or a conductive PLA (CPLA) composite. Preosteoblast cells were seeded onto the scaffolds and subjected to direct current ES via a purpose‐built cell culture chamber. It was found that CPLA scaffolds had no adverse effects on cell viability, proliferation or differentiation when compared with control scaffolds. The addition of ES, however, resulted in a significant increase in the expression of osteocalcin, a protein indicative of osteoblast maturation, after 14 days of culture. Furthermore, xylenol orange staining also showed the presence of increased mineralized calcium nodules in cultures undergoing stimulation. This study demonstrates the potential for low‐cost, conductive scaffolding materials to support cell viability and enhance in vitro mineralization in conjunction with ES.
- Open Access
- 21 December 2021
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 13 (1) , 1
Conductive Scaffolds for Bone Tissue Engineering: Current State and Future Outlook
Bone tissue engineering strategies attempt to regenerate bone tissue lost due to injury or disease. Three-dimensional (3D) scaffolds maintain structural integrity and provide support, while improving tissue regeneration through amplified cellular responses between implanted materials and native tissues. Through this, scaffolds that show great osteoinductive abilities as well as desirable mechanical properties have been studied. Recently, scaffolding for engineered bone-like tissues have evolved with the use of conductive materials for increased scaffold bioactivity. These materials make use of several characteristics that have been shown to be useful in tissue engineering applications and combine them in the hope of improved cellular responses through stimulation (i.e., mechanical or electrical). With the addition of conductive materials, these bioactive synthetic bone substitutes could result in improved regeneration outcomes by reducing current factors limiting the effectiveness of existing scaffolding materials. This review seeks to overview the challenges associated with the current state of bone tissue engineering, the need to produce new grafting substitutes, and the promising future that conductive materials present towards alleviating the issues associated with bone repair and regeneration.
- 21 December 2021
- Published by MDPI AG in Journal of Functional Biomaterials
- Vol. 13 (1) , 1
Open AccessConductive Scaffolds for Bone Tissue Engineering: Current State and Future Outlook
Bone tissue engineering strategies attempt to regenerate bone tissue lost due to injury or disease. Three-dimensional (3D) scaffolds maintain structural integrity and provide support, while improving tissue regeneration through amplified cellular responses between implanted materials and native tissues. Through this, scaffolds that show great osteoinductive abilities as well as desirable mechanical properties have been studied. Recently, scaffolding for engineered bone-like tissues have evolved with the use of conductive materials for increased scaffold bioactivity. These materials make use of several characteristics that have been shown to be useful in tissue engineering applications and combine them in the hope of improved cellular responses through stimulation (i.e., mechanical or electrical). With the addition of conductive materials, these bioactive synthetic bone substitutes could result in improved regeneration outcomes by reducing current factors limiting the effectiveness of existing scaffolding materials. This review seeks to overview the challenges associated with the current state of bone tissue engineering, the need to produce new grafting substitutes, and the promising future that conductive materials present towards alleviating the issues associated with bone repair and regeneration.