Lubomyr Kraynyk
Research Subjects
Lubomyr Kraynyk has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Dmytro Ruban
JSС Cherkasy Bus
11 shared publications - Hanna Ruban
Cherkasy State Business College
8 shared publications - Olena Lanets
Kingston University
4 shared publications - Vladyslav Khotunov
Cherkasy State Business College
4 shared publications - М. Г. Грубель
Національна академія сухопутних військ ім. гетьмана П. Сагайдачного, Львів, Україна
4 shared publications - Ihor Dufanets
старший викладач, кафедри автомобілів та тракторів, Львівський національний університет ветеринарної медицини та біотехнологій імені С.З. Ґжицького
3 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (11) , 308-319
Three-axle buses and lorries: Axle load dynamics and the design of brake systems
The subject of this study is the operational processes within the braking system of a three-axle bus, examined in conjunction with the transient dynamic redistribution of vertical reactions on the axles during emergency braking. The scientific novelty of the work lies in establishing the...
- 1 November 2026
- Published by WNGB Scientific Publishing House Sp. z o.o. in Advances in Science and Technology Research Journal
- Vol. 20 (11) , 308-319
Open AccessThree-axle buses and lorries: Axle load dynamics and the design of brake systems
The subject of this study is the operational processes within the braking system of a three-axle bus, examined in conjunction with the transient dynamic redistribution of vertical reactions on the axles during emergency braking. The scientific novelty of the work lies in establishing the...
- Open Access
- 25 December 2025
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- No. 4
FORMATION OF THE TRANSMISSION GEAR RANGE OF A UNIVERSAL WHEEL TRACTION VEHICLE
The method of determining the transmission mode of the universal wheeled traction and transport vehicle – UWTTV (Unimog/Autotrak type) of category N1/T1 has been developed from the conditions of both transport functions on highways and technological functions in off-road conditions, including mechanical tillage. Using the aggregate base of a heavy jeep developed by JSC “Ukrautobusprom”, class Oshkosh L-ATV, the avant-project of UWTTV TUR KT 041 with a semi-hooded cabin layout for 3 people, a cargo platform for 1.2 tons (or a building for technological equipment) and a system of trailed / mounted equipment has been developed. From the conditions of maximum unification of power drive units– engine, basic mechanical gearbox and main gears, the method of calculating the gear ratio, which reduces the transfer case transmission for performing technological operations, has been developed. For the most energy-intensive of them – plowing of agricultural land with a plow – a calculation method is presented with an orientation to a certain class of traction on the hook (here 1.4 t) in the conditions of a standardized agricultural background for wheeled tractors. The adequacy of the method is assessed by comparing the results of simulation modeling of the plowing process in the MATLAB Simulink software environment and experimental data using the example of a T 150K wheeled tractor.
- 25 December 2025
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- No. 4
Open AccessFORMATION OF THE TRANSMISSION GEAR RANGE OF A UNIVERSAL WHEEL TRACTION VEHICLE
The method of determining the transmission mode of the universal wheeled traction and transport vehicle – UWTTV (Unimog/Autotrak type) of category N1/T1 has been developed from the conditions of both transport functions on highways and technological functions in off-road conditions, including mechanical tillage. Using the aggregate base of a heavy jeep developed by JSC “Ukrautobusprom”, class Oshkosh L-ATV, the avant-project of UWTTV TUR KT 041 with a semi-hooded cabin layout for 3 people, a cargo platform for 1.2 tons (or a building for technological equipment) and a system of trailed / mounted equipment has been developed. From the conditions of maximum unification of power drive units– engine, basic mechanical gearbox and main gears, the method of calculating the gear ratio, which reduces the transfer case transmission for performing technological operations, has been developed. For the most energy-intensive of them – plowing of agricultural land with a plow – a calculation method is presented with an orientation to a certain class of traction on the hook (here 1.4 t) in the conditions of a standardized agricultural background for wheeled tractors. The adequacy of the method is assessed by comparing the results of simulation modeling of the plowing process in the MATLAB Simulink software environment and experimental data using the example of a T 150K wheeled tractor.
- Open Access
- 14 November 2025
- Published by Institute of Agroecology and Environmental Management NAAN in Agroecological journal
- No. 4,p. 205-212
Аgroecological assessment of machine-tractor units in agriculture: problematic issues and modern approaches to improvement
A comparative analysis of regulatory frameworks and assessment methodologies for tractors and automobiles under agroecological conditions in Ukraine and the EU (using Germany as an example) has been conducted. The study highlights the ambiguity of agroecological assessment when based solely on the specific pressure at the tire-soil contact point, as regulated by National Standard of Ukraine 4521:2006. In particular, at the same specific pressure values, tires of a larger size (and with a correspondingly higher wheel loads) cause a significantly greater depth and perimeter of soil compaction. The range of permissible specific pressure values is 4-fold and depends not only on the seasons and the corresponding soil density variants, but also on five levels of moisture content. The regulatory tools for determining density and moisture content (other National Standards of Ukraine) involve lengthy laboratory assessments and do not take into account the development of rapid assessment tools that have become widespread over the last 40-30 years. The assessment of wheeled tractors of traction class 3 and higher with different tire sizes on the front and rear axles is also problematic. The study examines the use of soil hardness—associated with soil density and moisture content—as an operational indicator of soil condition and as a basis for refining the calculation of the tire–ground contact patch area. The proposed assessment methodology is based on the use of piezoelectric penetrometers equipped with a standardized conical tip designed for determining the so-called cone index (CI). It is also suggested to adopt the corresponding ISO standard as a national DSTU, which is relevant for other fields of application as well. Proposals have been developed for the modernization and revision of the relevant regulatory framework for agricultural units, taking into account advances in tools for rapid soil condition assessment and variations in tire–ground contact patch area depending on soil hardness, tire inflation pressure, and axle load.
- 14 November 2025
- Published by Institute of Agroecology and Environmental Management NAAN in Agroecological journal
- No. 4,p. 205-212
Open AccessАgroecological assessment of machine-tractor units in agriculture: problematic issues and modern approaches to improvement
A comparative analysis of regulatory frameworks and assessment methodologies for tractors and automobiles under agroecological conditions in Ukraine and the EU (using Germany as an example) has been conducted. The study highlights the ambiguity of agroecological assessment when based solely on the specific pressure at the tire-soil contact point, as regulated by National Standard of Ukraine 4521:2006. In particular, at the same specific pressure values, tires of a larger size (and with a correspondingly higher wheel loads) cause a significantly greater depth and perimeter of soil compaction. The range of permissible specific pressure values is 4-fold and depends not only on the seasons and the corresponding soil density variants, but also on five levels of moisture content. The regulatory tools for determining density and moisture content (other National Standards of Ukraine) involve lengthy laboratory assessments and do not take into account the development of rapid assessment tools that have become widespread over the last 40-30 years. The assessment of wheeled tractors of traction class 3 and higher with different tire sizes on the front and rear axles is also problematic. The study examines the use of soil hardness—associated with soil density and moisture content—as an operational indicator of soil condition and as a basis for refining the calculation of the tire–ground contact patch area. The proposed assessment methodology is based on the use of piezoelectric penetrometers equipped with a standardized conical tip designed for determining the so-called cone index (CI). It is also suggested to adopt the corresponding ISO standard as a national DSTU, which is relevant for other fields of application as well. Proposals have been developed for the modernization and revision of the relevant regulatory framework for agricultural units, taking into account advances in tools for rapid soil condition assessment and variations in tire–ground contact patch area depending on soil hardness, tire inflation pressure, and axle load.
- Open Access
- 20 May 2025
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 1 (24) , 245-250
ФОРМУВАННЯ СХЕМИ ПРИВОДУ ГАЛЬМ І ДИФЕРЕНТУ МОНОБЛОЧНОГО КУЗОВА ТРИВІСНОГО АВТОБУСА
Першочергові роботи, які виникають під час розробки гальмівної системи автобуса та інших транспортних засобів, полягають у формуванні структури гальмівної системи. Для тривісних автобусів з моноблочним кузовом проблемним є визначення оптимальної схеми контурів з усіх можливих варіантів з метою забезпечення стабільності, безпеки та ефективності гальмування в різних умовах експлуатації з дотриманням вимог нормативних документів, зокрема Правил ЄЕК ООН № 13. Визначальну роль при цьому відіграє динаміка перерозподілу навантажень на осі під час гальмування, що супроводжується зміною положення центра мас та диферентом кузова автобуса, який впливає на ефективність гальмування, стійкість і керованість транспортного засобу. Додатковим чинником є нерівномірний розподіл навантажень на осі автобуса, середня вісь є ведучою з здвоєними шинами з найбільшим навантаженням, а передня і задня осі – з одинарними шинами і практично вдвоє меншими навантаженнями. Нормативні вимоги чинні як щодо номінальної, так і спорядженої мас автобуса, що суттєво відрізняються з умов навантажень на осі і центру мас. Значний вплив на динаміку перерозподілу навантажень має і кінематика напрямних штанг пневмопідвіски автобуса. Опрацьовано питання зближення координат центру диференту кузова ( до зведеного центру мас кузова) з умов кінематики пневмопідвіски та схеми контурів робочої гальмівної системи. Ключові слова: автобус, тривісний, гальмівна система, диферент кузова, пневматична схема, перерозподіл навантаження, гальмування.
- 20 May 2025
- Published by Lutsk National Technical University in СУЧАСНІ ТЕХНОЛОГІЇ В МАШИНОБУДУВАННІ ТА ТРАНСПОРТІ
- Vol. 1 (24) , 245-250
Open AccessФОРМУВАННЯ СХЕМИ ПРИВОДУ ГАЛЬМ І ДИФЕРЕНТУ МОНОБЛОЧНОГО КУЗОВА ТРИВІСНОГО АВТОБУСА
Першочергові роботи, які виникають під час розробки гальмівної системи автобуса та інших транспортних засобів, полягають у формуванні структури гальмівної системи. Для тривісних автобусів з моноблочним кузовом проблемним є визначення оптимальної схеми контурів з усіх можливих варіантів з метою забезпечення стабільності, безпеки та ефективності гальмування в різних умовах експлуатації з дотриманням вимог нормативних документів, зокрема Правил ЄЕК ООН № 13. Визначальну роль при цьому відіграє динаміка перерозподілу навантажень на осі під час гальмування, що супроводжується зміною положення центра мас та диферентом кузова автобуса, який впливає на ефективність гальмування, стійкість і керованість транспортного засобу. Додатковим чинником є нерівномірний розподіл навантажень на осі автобуса, середня вісь є ведучою з здвоєними шинами з найбільшим навантаженням, а передня і задня осі – з одинарними шинами і практично вдвоє меншими навантаженнями. Нормативні вимоги чинні як щодо номінальної, так і спорядженої мас автобуса, що суттєво відрізняються з умов навантажень на осі і центру мас. Значний вплив на динаміку перерозподілу навантажень має і кінематика напрямних штанг пневмопідвіски автобуса. Опрацьовано питання зближення координат центру диференту кузова ( до зведеного центру мас кузова) з умов кінематики пневмопідвіски та схеми контурів робочої гальмівної системи. Ключові слова: автобус, тривісний, гальмівна система, диферент кузова, пневматична схема, перерозподіл навантаження, гальмування.
- Open Access
- 30 April 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (134)) , 22-31
Identifying the influence of micro profile of rural roads on the durability of bus body when carrying passengers
The object of this study is the durability of a bus body when passengers are transported on rural roads. According to the European classification, the total length of roads in Ukraine that correspond to the first category does not exceed 5 %. That is, all other 95 % of roads have a quality level that does not meet the regulatory operating conditions. In particular, in rural areas, buses are operated both on worn asphalt-concrete surfaces and on dirt and gravel roads. Such operating conditions additionally lead to intensive wear of buses and significantly worsen the durability of their bodies. The task to determine the influence of worn and dirt roads on the durability of the bus body during passenger transportation in rural areas could be solved by the durability assessment procedure proposed in this paper. The current work presents patterns that make it possible to predict the degradation of the bus body material that affect the durability of the body. The factors of influence during the operation of buses on rural routes have been substantiated and presented. The simulation results show that when operating buses on rural roads, cracks in the body frame of the body occur at runs that are 3.8–13.1 times less than under regulatory operating conditions. The proposed procedure for assessing the durability of a bus body when transporting passengers on rural roads makes it possible to predict the deterioration of the physical and mechanical properties of the elements of the bus body frame and take measures at the design stage to increase their reliability and durability
- 30 April 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (134)) , 22-31
Open AccessIdentifying the influence of micro profile of rural roads on the durability of bus body when carrying passengers
The object of this study is the durability of a bus body when passengers are transported on rural roads. According to the European classification, the total length of roads in Ukraine that correspond to the first category does not exceed 5 %. That is, all other 95 % of roads have a quality level that does not meet the regulatory operating conditions. In particular, in rural areas, buses are operated both on worn asphalt-concrete surfaces and on dirt and gravel roads. Such operating conditions additionally lead to intensive wear of buses and significantly worsen the durability of their bodies. The task to determine the influence of worn and dirt roads on the durability of the bus body during passenger transportation in rural areas could be solved by the durability assessment procedure proposed in this paper. The current work presents patterns that make it possible to predict the degradation of the bus body material that affect the durability of the body. The factors of influence during the operation of buses on rural routes have been substantiated and presented. The simulation results show that when operating buses on rural roads, cracks in the body frame of the body occur at runs that are 3.8–13.1 times less than under regulatory operating conditions. The proposed procedure for assessing the durability of a bus body when transporting passengers on rural roads makes it possible to predict the deterioration of the physical and mechanical properties of the elements of the bus body frame and take measures at the design stage to increase their reliability and durability
- Open Access
- 10 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(82)) , 50-56
Estimation of fuel consumption in standard driving cycles and in real bus operation
The object of research is the basic fuel consumption of a bus in standard urban cycles and identical conditions in real operation. Standard driving cycles are used to estimate fuel consumption. This allows consumers to compare buses and choose the best one, and manufacturers in the process of improving buses also allow them to estimate fuel consumption. However, sometimes standards may not correspond to reality. Therefore, specific routes are developed for some cities, which requires significant development costs. This problem is solved by collecting reliable information on average fuel consumption with an operating period of 1 year and bus mileage of 40–90 thousand km. As a rule, operating organizations do not provide such information. The development of electronic control systems allows to obtain information from “black boxes” additionally installed by the manufacturer, which record information throughout the entire service life of the bus. This approach is implemented in this work. Existing standards for determining fuel consumption in urban driving cycles are presented. The results of modeling and real tests are presented. Information was collected from the “black boxes” on fuel consumption on 12 buses for 1 year of operation with mileage from 40 to 90 thousand km on Ataman A092N6 buses. Fuel consumption was 16.4–21.2 l/100 km when operating buses in one city (the manufacturer claims up to 23 l/100 km). This makes it possible to solve the problem of collecting reliable information on fuel consumption based on year-round operation of buses, which has not been carried out in this format before. The results of this study will allow operating organizations to see the real fuel consumption on Ataman A092N6 buses in the city. Implementation of this approach on other buses will allow obtaining data for interested organizations similarly. This will allow estimating fuel consumption without additional tests, which will reduce research costs.
- 10 April 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 2 (1(82)) , 50-56
Open AccessEstimation of fuel consumption in standard driving cycles and in real bus operation
The object of research is the basic fuel consumption of a bus in standard urban cycles and identical conditions in real operation. Standard driving cycles are used to estimate fuel consumption. This allows consumers to compare buses and choose the best one, and manufacturers in the process of improving buses also allow them to estimate fuel consumption. However, sometimes standards may not correspond to reality. Therefore, specific routes are developed for some cities, which requires significant development costs. This problem is solved by collecting reliable information on average fuel consumption with an operating period of 1 year and bus mileage of 40–90 thousand km. As a rule, operating organizations do not provide such information. The development of electronic control systems allows to obtain information from “black boxes” additionally installed by the manufacturer, which record information throughout the entire service life of the bus. This approach is implemented in this work. Existing standards for determining fuel consumption in urban driving cycles are presented. The results of modeling and real tests are presented. Information was collected from the “black boxes” on fuel consumption on 12 buses for 1 year of operation with mileage from 40 to 90 thousand km on Ataman A092N6 buses. Fuel consumption was 16.4–21.2 l/100 km when operating buses in one city (the manufacturer claims up to 23 l/100 km). This makes it possible to solve the problem of collecting reliable information on fuel consumption based on year-round operation of buses, which has not been carried out in this format before. The results of this study will allow operating organizations to see the real fuel consumption on Ataman A092N6 buses in the city. Implementation of this approach on other buses will allow obtaining data for interested organizations similarly. This will allow estimating fuel consumption without additional tests, which will reduce research costs.
- Open Access
- 26 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (7 (133)) , 50-63
Determining the effect of triangular interwindow openings in a bus body on its structure, strength, and passive safety
The object of this study is a spatial model of the body frame for the Ukrautobusprom 4289 city bus, which is subject to structural optimization of the sidewalls in order to strengthen them because of the increase in equipped weight. The reason for loading is the need to install batteries on the roof, which is the only possible location, given the low-entry layout. Electrification of city buses is associated with the inevitable regulated reduction of CO2 emissions by 30 % by 2030 (Euro 7) and complete decarbonization by 2050. Making up 30–40 % of the total cost of the bus, the body requires preservation when re-equipping diesel city buses for electric traction. Electrification automatically imposes UNECE R100 requirements for the absorption of 5.5 and 6g accelerations by the battery pack together with the body. To solve the problem, a transition from classic rectangular to triangular inter-window openings of the sidewalls has been proposed. An analytical methodology for simulating full-scale tests is proposed, close to real physical tests. Owing to the higher rigidity of triangular structures, a reduction in maximum stresses by 2.85 and 16.75 % was achieved under the static torsion and bending modes while the structure was maintained within the yield strength of steel σy=252 MPa. Maximum deformations decreased by 28.71 % in bending and by 50.77 % in torsion. Stresses under R100 conditions decreased by 18.52 and 16.07 % under the 6.6g and 5g modes, respectively. Deformations in the latter case decreased by 46.09 % and amounted to 10.83 mm only. Owing to the proposed approach, it was possible to achieve unification of the body for any type of drive: diesel, hybrid, or electric. Given sufficient technological feasibility of bus body production, this solution could be used in practice
- 26 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (7 (133)) , 50-63
Open AccessDetermining the effect of triangular interwindow openings in a bus body on its structure, strength, and passive safety
The object of this study is a spatial model of the body frame for the Ukrautobusprom 4289 city bus, which is subject to structural optimization of the sidewalls in order to strengthen them because of the increase in equipped weight. The reason for loading is the need to install batteries on the roof, which is the only possible location, given the low-entry layout. Electrification of city buses is associated with the inevitable regulated reduction of CO2 emissions by 30 % by 2030 (Euro 7) and complete decarbonization by 2050. Making up 30–40 % of the total cost of the bus, the body requires preservation when re-equipping diesel city buses for electric traction. Electrification automatically imposes UNECE R100 requirements for the absorption of 5.5 and 6g accelerations by the battery pack together with the body. To solve the problem, a transition from classic rectangular to triangular inter-window openings of the sidewalls has been proposed. An analytical methodology for simulating full-scale tests is proposed, close to real physical tests. Owing to the higher rigidity of triangular structures, a reduction in maximum stresses by 2.85 and 16.75 % was achieved under the static torsion and bending modes while the structure was maintained within the yield strength of steel σy=252 MPa. Maximum deformations decreased by 28.71 % in bending and by 50.77 % in torsion. Stresses under R100 conditions decreased by 18.52 and 16.07 % under the 6.6g and 5g modes, respectively. Deformations in the latter case decreased by 46.09 % and amounted to 10.83 mm only. Owing to the proposed approach, it was possible to achieve unification of the body for any type of drive: diesel, hybrid, or electric. Given sufficient technological feasibility of bus body production, this solution could be used in practice
- Open Access
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (128)) , 64-72
Improving a methodology for estimating the cross-country ability of all-wheel-drive vehicles
The object of this study is the cross-country ability of four-wheel drive vehicles under off-road conditions. Based on the results of analysis of known studies, it was determined that the procedures of experimental assessment of the load-bearing capacity of bearing surfaces (BS), based on the use of the cone index, are used in NATO member countries. They take into account the characteristics of the surface of the theater of operations and make it possible to determine the approximate speeds of all-wheel drive vehicles with the help of standardized computer software. In the procedures for assessing the load-bearing capacity of BSs, which use the soil deformation module E, there is no possibility for calculating the speed of the car with known axle loads. In addition, they provide for the determination of a number of parameters of the bearing surface, such as the coefficient of adhesion, the angle of internal friction in the soil, and the shear modulus during the formation of a track. This makes them much more difficult compared to the procedures used by NATO. Therefore, the problem that is solved in this work is to improve the methodology for assessing the reference cross-country ability of four-wheel drive vehicles. Based on the results of scientific research, motion modeling was carried out in the MATLAB Simulink environment to determine parameters of reference cross-country ability of four-wheel drive vehicles. In order to determine the cross-country ability of samples of wheeled military vehicles (WMV) based on the indicator of the maximum pressure value (mean measure pressure – MMP), the conducted experimental studies were analyzed. They showed a difference in the speed modes of vehicles of the same gross weight but different layout schemes, within 11–12 %. Therefore, the methodology for assessing the cross-country ability based on MMP has been improved to take into account the features of the layout of WMV samples. Specifically, taking into account the different values of loads on the front axle of vehicles with hoodless and hood layouts at the same gross weight. In general, the improved procedure makes it possible to give a quantitative assessment of the movement mobility of WMV samples with various layout schemes and an assessment of their potential cross-country ability on the basis of the proposed refinement of MMP calculation
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (1 (128)) , 64-72
Open AccessImproving a methodology for estimating the cross-country ability of all-wheel-drive vehicles
The object of this study is the cross-country ability of four-wheel drive vehicles under off-road conditions. Based on the results of analysis of known studies, it was determined that the procedures of experimental assessment of the load-bearing capacity of bearing surfaces (BS), based on the use of the cone index, are used in NATO member countries. They take into account the characteristics of the surface of the theater of operations and make it possible to determine the approximate speeds of all-wheel drive vehicles with the help of standardized computer software. In the procedures for assessing the load-bearing capacity of BSs, which use the soil deformation module E, there is no possibility for calculating the speed of the car with known axle loads. In addition, they provide for the determination of a number of parameters of the bearing surface, such as the coefficient of adhesion, the angle of internal friction in the soil, and the shear modulus during the formation of a track. This makes them much more difficult compared to the procedures used by NATO. Therefore, the problem that is solved in this work is to improve the methodology for assessing the reference cross-country ability of four-wheel drive vehicles. Based on the results of scientific research, motion modeling was carried out in the MATLAB Simulink environment to determine parameters of reference cross-country ability of four-wheel drive vehicles. In order to determine the cross-country ability of samples of wheeled military vehicles (WMV) based on the indicator of the maximum pressure value (mean measure pressure – MMP), the conducted experimental studies were analyzed. They showed a difference in the speed modes of vehicles of the same gross weight but different layout schemes, within 11–12 %. Therefore, the methodology for assessing the cross-country ability based on MMP has been improved to take into account the features of the layout of WMV samples. Specifically, taking into account the different values of loads on the front axle of vehicles with hoodless and hood layouts at the same gross weight. In general, the improved procedure makes it possible to give a quantitative assessment of the movement mobility of WMV samples with various layout schemes and an assessment of their potential cross-country ability on the basis of the proposed refinement of MMP calculation
- Open Access
- 8 January 2024
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 26 (1) , B22-B30
Predictive Assessment of Bus Body Life in the Matlab Simulink Software Environment
The lifespan prediction of the bus body of the load-bearing structure has been made and compared to the results of real operation. The maximum approximation of the simulation modelling results in Matlab Simulink to real operation is explained ...
- 8 January 2024
- Published by University of Zilina in Communications - Scientific letters of the University of Zilina
- Vol. 26 (1) , B22-B30
Open AccessPredictive Assessment of Bus Body Life in the Matlab Simulink Software Environment
The lifespan prediction of the bus body of the load-bearing structure has been made and compared to the results of real operation. The maximum approximation of the simulation modelling results in Matlab Simulink to real operation is explained ...
- 30 September 2023
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- Vol. 3 (275)
SAFETY OF PASSENGER TRANSPORTATION AND DEVELOPMENT OF TECHNICAL CONTROL OF PUBLIC TRANSPORT BUSES
The results of research indicating how the physical and mechanical properties of public transport bus bodies change during operation are shown. The regularities of reducing the thickness of the load-bearing elements of the body frame depending on the mileage and service life of buses are presented. The results of simulation modeling of the com-pliance of the bus with the UNECE Rules № 66 with a service life of 8 years, indicate the unacceptable further exploitation of such a bus. Such a bus has increased deformations of the racks during rollover and does not provide proper living space for the cabin. It is proved that in Ukraine the technical control of buses regarding their technical condition in ac-cordance with the existing regulatory framework has a formal approach using visual control methods. On the basis of review and analysis of the current situation in the sector of safety of passenger transportation by bus public transport and studies of changes in the strength of bus bodies during operation, the main provisions of the formation of technical control are presented as well as the corresponding changes – updating State standard of Ukraine 3649: 2010 ‘Wheeled vehicles. Requirements for safe technical condition and control methods’. The proposed provisions provide for the control of bodies during operation to be carried out taking into account the European regulatory framework and features of operation in Ukraine. With such controls it is proposed to use progressive means of assessing the deterioration of the thickness of the walls of load-bearing racks of the frame and their physical and mechanical properties. This way will al-low for a reliable assessment of the technical condition of bus bodies which will ensure the proper technical condition of buses and its passive safety throughout the entire service life. Key words: safety, bus, technical control, body, corrosion, fatigue strength, standard.
- 30 September 2023
- Published by The State Enterprise - The State Road Transport Research Institute - SE SRTRI in Avtoshliakhovyk Ukrayiny
- Vol. 3 (275)
SAFETY OF PASSENGER TRANSPORTATION AND DEVELOPMENT OF TECHNICAL CONTROL OF PUBLIC TRANSPORT BUSES
The results of research indicating how the physical and mechanical properties of public transport bus bodies change during operation are shown. The regularities of reducing the thickness of the load-bearing elements of the body frame depending on the mileage and service life of buses are presented. The results of simulation modeling of the com-pliance of the bus with the UNECE Rules № 66 with a service life of 8 years, indicate the unacceptable further exploitation of such a bus. Such a bus has increased deformations of the racks during rollover and does not provide proper living space for the cabin. It is proved that in Ukraine the technical control of buses regarding their technical condition in ac-cordance with the existing regulatory framework has a formal approach using visual control methods. On the basis of review and analysis of the current situation in the sector of safety of passenger transportation by bus public transport and studies of changes in the strength of bus bodies during operation, the main provisions of the formation of technical control are presented as well as the corresponding changes – updating State standard of Ukraine 3649: 2010 ‘Wheeled vehicles. Requirements for safe technical condition and control methods’. The proposed provisions provide for the control of bodies during operation to be carried out taking into account the European regulatory framework and features of operation in Ukraine. With such controls it is proposed to use progressive means of assessing the deterioration of the thickness of the walls of load-bearing racks of the frame and their physical and mechanical properties. This way will al-low for a reliable assessment of the technical condition of bus bodies which will ensure the proper technical condition of buses and its passive safety throughout the entire service life. Key words: safety, bus, technical control, body, corrosion, fatigue strength, standard.