Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bulbul Ahmed has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Machine Learning in Geotechnics: Predicting Unconfined Compressive Strength of Stabilized Organic Soils Using Hybrid Models

    by Utkarsh, Pradeep Kumar Jain, Bulbul Ahmed

    It is important to predict the unconfined compressive strength (UCS) of stabilized organic soils to be used in designing of foundations. Although machine learning (ML) methods have potential, the literature does not provide overall comparisons. This research suggests a new ML model that uses support vector regression (SVR), multilayer perceptron (MLP), and gradient boosting regression (GBR) and particle swarm optimization (PSO), and hunger games search (HGS) to optimize hyperparameters. The models are trained with 227 measurements of UCS and assessed with the help of cross‐validation. SHapley Additive exPlanations (SHAPs) are used to analyze the importance of the features. The MLP‐HGS and MLP‐PSO model has outstanding performance and the R 2 of 0.999, low root mean square error (RMSE), and mean absolute error (MAE). The most powerful variable that can be identified is cement content, followed by sand, clay, and gravel. The given framework is more accurate and easily interpretable compared to existing studies. The presented innovative method helps to develop ML‐based geotechnical modeling. The results provide information on how the soil stabilization measures can be optimized and the design of stabilized soil foundation made more straightforward.


  • Open Access

    Experimental study on prefabricated CFST Columns with bolt-coupler baseplate connections under compression

    by Ashraful Habib, Kamrul Hassan, Swapan Saha, Bulbul Ahmed, Mohamed Ghannam

  • Open Access

    Strength design of steel-concrete composite columns considering size effects and concrete cover spalling

    by Aydin Daei, Bulbul Ahmed, Utsab Katwal, Kamrul Hassan, Won-Hee Kang, Mahbub Khan, Brian Uy, Zhong Tao


  • Top Cited Papers
    Open Access

    A Comprehensive Review on Intumescent Coatings: Formulation, Manufacturing Methods, Research Development, and Issues

    by Touha Nazrun, Kamrul Hassan, Rayhan Hasnat, Delwar Hossain, Bulbul Ahmed, Swapan Saha

    Fire has been proven to threaten human lives and buildings significantly. Extensive research is being conducted globally to reduce fire risks, particularly in high-rise buildings that incorporate steel for structural support, timber for decorative elements, and cladding for insulation. Traditional passive fireproofing materials, such as concrete coverings, gypsum boards, and cementitious coatings, often lack aesthetic appeal. Intumescent coatings offer a promising solution to this issue. These coatings require a thin layer on the substrate to protect from fire, and the thin layer expands up to many times its original thickness when exposed to fire, forming an insulating char that acts as a barrier between fire and the substrate. This barrier prevents the steel from reaching critical temperature and helps maintain its integrity during a fire incident. Hence, intumescent coatings are a great choice for passive fire protection of load-bearing steel, wooden structures, timber, and cementitious buildings. Although some research articles discuss intumescent coating types, application methods, fabrication processes, cost-effectiveness, bonding performance, toxicity, and various uses, a comprehensive study encompassing all these topics still needs to be conducted. This review paper explores different types of intumescent coatings, their formulation and manufacturing methods, their application processes, and their use on various substrates. It also covers the key intumescent coating materials and their interactions during fire. Challenges and issues, such as fire protection time, char-forming temperature, and toxicity, are discussed.


  • Open Access

    Sustainable and Cost‐Effective Concrete by Potential Uses of Sugarcane Bagasse Ash as a Supplement to Cementitious Materials

    by Bulbul Ahmed, Abdullahil Muhsee, Intekhab Uddin Ahmad Chy, Abid Hussain

    Cement used as binding material in concrete has significant impact on environment due to the emission of NO 2 , SO 2 , CO, CO 2 , dioxins, furans and particulate matter. The average values of NO 2 and SO 2 emissions are 117.09 and 1154.82 μg/m 3 , respectively. About 1 ton of carbon dioxide is emitted into the atmosphere in the production process of 1 ton of cement. Therefore, there is a scope for developing sustainable and cost‐effective concrete for the construction industry. This research presents the potential uses of sugarcane bagasse ash (SBA) as a replacement for ordinary portland cement (OPC). Four different percentages (0%, 3%, 6% and 9%) by weight of SBA were used as the replacement for cement to prepare 20 MPa concrete. Firstly, the properties of cement with different percentages of SBA were determined experimentally. The initial and final setting time, normal consistency and the compressive strength at 3, 7 and 28 days curing period were measured in the laboratory. Secondly, a total of 12 cylindrical specimens with different percentages by weight of SBA were prepared and tested at 28‐day curing period. Test results showed that a 3% replacement of OPC with SBA met standard requirements for setting time, normal consistency, and compressive strength. Notably, the compressive strength of concrete increased significantly at the 3% SBA level compared to the control mix. Economic analysis revealed that using 3% SBA could reduce costs by 87 BDT per cubic metre of concrete. For a practical highway project in Rajshahi City Corporation, this replacement translated into a relative slab thickness of a rigid pavement of 29 mm and a relative cost of 82.23%. These findings demonstrate that SBA possesses cementitious properties and can serve as an eco‐friendly alternative material while reducing construction costs.


  • Open Access

    Challenges of Adaptive Cruise Control Systems in Bangladesh Road Transportation Sectors: A State of Art

    by Bulbul Ahmed, Abdullahil Muhsee, Sazzatul Amin Rafi

    Adaptive cruise control (ACC) is one of the modern vehicle digitalization inventions over the world. It automatically adjusts the speed of a subject vehicle to match the speed of the vehicle in front of the subject vehicle. The ACC systems will be the more advanced driving assistant techniques in the next generation of Bangladesh. Therefore, a broad review on the ACC systems has been performed in the present study. In this study, the past researches on ACC systems over the world, the present scenario of ACC systems in Bangladesh, and future challenges in Bangladesh to implement ACC systems have been studied in detail. From the study, it is noticed that ACC systems were used in the world in the very beginning of 1995. These systems have been paid high attention to reduce the accident and accidental death rate, to save the energy, to reduce the impacts on the environment, and to fulfill the sustainable development goals (SDGs) declared by the United Nations (UN). It was first imported to Bangladesh in 2015, but most of the drivers do not feel comfortable on applying it. Studies have found some drawbacks of the ACC systems in banking of roads, turning points on roads, and making drivers less conscious. The system also has some issues in terms of traffic flow stability and control over lane positions. This article also attempts to summarize the current road condition, workability of ACC systems, drawbacks of ACC, the traffic flow stability, and existing challenges for ACC systems in Bangladesh’s road conditions.

  • Open Access

    Application of Biopolymers as Sustainable Cladding Materials: A Review

    by Touha Nazrun, Kamrul Hassan, Delwar Hossain, Bulbul Ahmed, Rayhan Hasnat, Swapan Saha

    The application of biopolymer materials in cladding presents a promising avenue for enhancing building sustainability, while addressing the limitations of conventional synthetic polymers. Cladding serves a dual purpose of protection and aesthetics for buildings, but increasing global energy consumption and environmental concerns necessitate the adoption of sustainable practices. The construction sector’s substantial energy usage and greenhouse gas emissions highlight the urgent need for sustainable building materials. Conventional cladding materials often lack sustainability and environmental compatibility. Biopolymers, derived from living organisms or by-products, offer a potential solution with their biodegradability, renewability, and low embodied energy. These materials can revolutionise cladding practices by providing eco-friendly alternatives aligned with sustainable construction demands. Integrating biopolymers with synthetic polymers can enhance material biodegradability, contributing to overall degradation. Prominent biopolymers like PLA, PHAs, starch-based polymers, cellulose, PHB, and PBS exhibit biodegradability and sustainability, positioning them in the front rank for cladding applications. Despite significant research in biopolymer applications in different fields, there is limited research to identify the application and limitations of biopolymers as building cladding materials. This review paper aims to bridge the research gaps by comprehensively analysing diverse biopolymer cladding materials based on their properties and exploring their cross-domain utility, thereby highlighting their transformative role in sustainable construction practices. The expanding biopolymer market in building cladding materials underscores their potential to drive innovation, with projected growth emphasising their importance.


  • Open Access

    Water Mist Fire Suppression Systems for Building and Industrial Applications: Issues and Challenges

    by Kyle Farrell, Kamrul Hassan, Delwar Hossain, Bulbul Ahmed, Payam Rahnamayiezekavat, Grahame Douglas, Swapan Saha

    Interest in water mist fire suppression has increased within the fire protection industry due to its ability to control the spread and development of fire without using environmentally damaging agents. Water mist fire suppression has been used for many years in various applications such as machinery spaces, combustion turbine enclosures, and onboard passenger sea vessels. Now there is a demand to use this firefighting method to protect other fire risks such as cooking areas, commercial buildings, residential buildings, electrical equipment, road tunnels, bushfire (wildland fire) protection, and nuclear power generation facilities. To support this industry demand, this review covers the fundamentals of water mist, its suppression mechanisms, areas of application, existing research and development, and the codes and standards related to design. This comprehensive review provides a clear history of water mist suppression. It is able to identify the issues and challenges related to the technology to help pave the way for future research and development that will improve these systems to a level so that they are suitable for these new applications and meet the industry demand for nontoxic fire suppression systems.


  • Open Access

    Behaviour and Design of Bolt-Coupler Connections under Compression in Prefabricated CFST Columns

    by Kamrul Hassan, Bulbul Ahmed, Anmol Ram, Swapan Saha

    The paper presents the investigated results of bolt-coupler connections under compression experimentally. Bolt-coupler connections have been developed recently for prefabricated column-to-column (PCC) connections to simplify the construction process of prefabricated concrete-filled steel tubular (CFST) columns and to transfer the upper column load to the bottom column through bolt-coupler connections. However, the behaviour of bolt-coupler connections under compression has not been investigated in the past although there are some experimental and numerical studies conducted on bolt-coupler connections under tension. To address these research gaps, the behaviour of bolt-coupler connections under compression has been investigated. The main parameters considered in this study are bolt diameters (M16, M20, M24), bolt grades (8.8, 10.9 grade), gap inside the coupler between two bolts of bolt-coupler connection (0, 10, 20 mm), and coupler grade (5.6, 8.8 grade). It is observed that the ultimate capacity of bolt-coupler connections is reduced significantly with an increase in the bolt gap inside the coupler of the bolt-coupler connection. Based on the test data, a design equation is developed to determine the design capacity of bolt-coupler connections under compression, which will be very useful in designing the PCC connections of sustainable prefabricated CFST columns.


  • Structural Health Monitoring of Steel Frame Structure by Experimental Modal Parameter Identification

    by Bulbul Ahmed, Florea Dinu, Ioan Marginean

    Structural health monitoring (SHM) is a modern technique f or damage identification in the e xis ting structure. The structural stiffness, frequency, damping, and dominant mode shapes represent the actual operating conditions of the structure. The main principle of structural health monitoring is to identif y the mod al parameters from experime ntal resu lts both damaged and undamaged conditions. Damage is much effective to decrease stiffness and strength of structural components and it changes dynamic behaviour and damping ratio of whole structures. Bruel & Kjaer experi mental modal analys is technique is r ecently used for civil engineering structures for modal parameters estimation. The paper describes the initial structural health monitoring of a steel frame . The modal parameters were estimated for undamaged condition s a nd these result s are verified and up dated by the numerical FEM tool SAP2000. For the undamaged structure , mode shapes and frequencies were calibrated properly. In the second step, damaged was initiated by dismantling one element from the lower part of the frame. The estimat ed m odal parameter s were compared to the initial one. The mode shapes and frequencies are quite different for some specific mode due to damage initiation . One extra mode was created for the damaged frame due to damage initiation. The 4 th mode was not found f or the initial m easurement because of presence of lower beam. Lower beam restraints the 4 th mode and the frame behaves more flexible. Keywords: SHM , Modal parameters, FEM modelling, Damage characterization, Experimental mo dal analysis (EMA) .