Abdullahil Muhsee
Research Subjects
Abdullahil Muhsee has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Bulbul Ahmed
School of Engineering, Design and Built Environment, Western Sydney University, Penrith, NSW 2751, Australia
2 shared publications - Abid Hussain
Department of Civil Engineering, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh
1 shared publication - Intekhab Uddin Ahmad Chy1 shared publication
- Sazzatul Amin Rafi1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Sustainable and Cost‐Effective Concrete by Potential Uses of Sugarcane Bagasse Ash as a Supplement to Cementitious Materials
Cement used as binding material in concrete has significant impact on environment due to the emission of NO 2 , SO 2 , CO, CO 2 , dioxins, furans and particulate matter. The average values of NO 2 and SO 2 emissions are 117.09 and 1154.82 μg/m 3 , respectively. About 1 ton of carbon dioxide is emitted into the atmosphere in the production process of 1 ton of cement. Therefore, there is a scope for developing sustainable and cost‐effective concrete for the construction industry. This research presents the potential uses of sugarcane bagasse ash (SBA) as a replacement for ordinary portland cement (OPC). Four different percentages (0%, 3%, 6% and 9%) by weight of SBA were used as the replacement for cement to prepare 20 MPa concrete. Firstly, the properties of cement with different percentages of SBA were determined experimentally. The initial and final setting time, normal consistency and the compressive strength at 3, 7 and 28 days curing period were measured in the laboratory. Secondly, a total of 12 cylindrical specimens with different percentages by weight of SBA were prepared and tested at 28‐day curing period. Test results showed that a 3% replacement of OPC with SBA met standard requirements for setting time, normal consistency, and compressive strength. Notably, the compressive strength of concrete increased significantly at the 3% SBA level compared to the control mix. Economic analysis revealed that using 3% SBA could reduce costs by 87 BDT per cubic metre of concrete. For a practical highway project in Rajshahi City Corporation, this replacement translated into a relative slab thickness of a rigid pavement of 29 mm and a relative cost of 82.23%. These findings demonstrate that SBA possesses cementitious properties and can serve as an eco‐friendly alternative material while reducing construction costs.
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Open AccessSustainable and Cost‐Effective Concrete by Potential Uses of Sugarcane Bagasse Ash as a Supplement to Cementitious Materials
Cement used as binding material in concrete has significant impact on environment due to the emission of NO 2 , SO 2 , CO, CO 2 , dioxins, furans and particulate matter. The average values of NO 2 and SO 2 emissions are 117.09 and 1154.82 μg/m 3 , respectively. About 1 ton of carbon dioxide is emitted into the atmosphere in the production process of 1 ton of cement. Therefore, there is a scope for developing sustainable and cost‐effective concrete for the construction industry. This research presents the potential uses of sugarcane bagasse ash (SBA) as a replacement for ordinary portland cement (OPC). Four different percentages (0%, 3%, 6% and 9%) by weight of SBA were used as the replacement for cement to prepare 20 MPa concrete. Firstly, the properties of cement with different percentages of SBA were determined experimentally. The initial and final setting time, normal consistency and the compressive strength at 3, 7 and 28 days curing period were measured in the laboratory. Secondly, a total of 12 cylindrical specimens with different percentages by weight of SBA were prepared and tested at 28‐day curing period. Test results showed that a 3% replacement of OPC with SBA met standard requirements for setting time, normal consistency, and compressive strength. Notably, the compressive strength of concrete increased significantly at the 3% SBA level compared to the control mix. Economic analysis revealed that using 3% SBA could reduce costs by 87 BDT per cubic metre of concrete. For a practical highway project in Rajshahi City Corporation, this replacement translated into a relative slab thickness of a rigid pavement of 29 mm and a relative cost of 82.23%. These findings demonstrate that SBA possesses cementitious properties and can serve as an eco‐friendly alternative material while reducing construction costs.
- Open Access
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Challenges of Adaptive Cruise Control Systems in Bangladesh Road Transportation Sectors: A State of Art
Adaptive cruise control (ACC) is one of the modern vehicle digitalization inventions over the world. It automatically adjusts the speed of a subject vehicle to match the speed of the vehicle in front of the subject vehicle. The ACC systems will be the more advanced driving assistant techniques in the next generation of Bangladesh. Therefore, a broad review on the ACC systems has been performed in the present study. In this study, the past researches on ACC systems over the world, the present scenario of ACC systems in Bangladesh, and future challenges in Bangladesh to implement ACC systems have been studied in detail. From the study, it is noticed that ACC systems were used in the world in the very beginning of 1995. These systems have been paid high attention to reduce the accident and accidental death rate, to save the energy, to reduce the impacts on the environment, and to fulfill the sustainable development goals (SDGs) declared by the United Nations (UN). It was first imported to Bangladesh in 2015, but most of the drivers do not feel comfortable on applying it. Studies have found some drawbacks of the ACC systems in banking of roads, turning points on roads, and making drivers less conscious. The system also has some issues in terms of traffic flow stability and control over lane positions. This article also attempts to summarize the current road condition, workability of ACC systems, drawbacks of ACC, the traffic flow stability, and existing challenges for ACC systems in Bangladesh’s road conditions.
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Open AccessChallenges of Adaptive Cruise Control Systems in Bangladesh Road Transportation Sectors: A State of Art
Adaptive cruise control (ACC) is one of the modern vehicle digitalization inventions over the world. It automatically adjusts the speed of a subject vehicle to match the speed of the vehicle in front of the subject vehicle. The ACC systems will be the more advanced driving assistant techniques in the next generation of Bangladesh. Therefore, a broad review on the ACC systems has been performed in the present study. In this study, the past researches on ACC systems over the world, the present scenario of ACC systems in Bangladesh, and future challenges in Bangladesh to implement ACC systems have been studied in detail. From the study, it is noticed that ACC systems were used in the world in the very beginning of 1995. These systems have been paid high attention to reduce the accident and accidental death rate, to save the energy, to reduce the impacts on the environment, and to fulfill the sustainable development goals (SDGs) declared by the United Nations (UN). It was first imported to Bangladesh in 2015, but most of the drivers do not feel comfortable on applying it. Studies have found some drawbacks of the ACC systems in banking of roads, turning points on roads, and making drivers less conscious. The system also has some issues in terms of traffic flow stability and control over lane positions. This article also attempts to summarize the current road condition, workability of ACC systems, drawbacks of ACC, the traffic flow stability, and existing challenges for ACC systems in Bangladesh’s road conditions.