Anuwat Suwannachit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Anuwat Suwannachit has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Udo Nackenhorst
Institute of Mechanics and Computational Mechanics (IBNM), Leibniz University Hannover, Hannover, Germany
4 shared publications - Matthias Ziefle
Leibniz Universität Hannover
1 shared publication R. Chiarello
Leibniz Universität Hannover
1 shared publicationUdo Nackenhorst
Institut für Baumechanik und Numerische Mechanik, Leibniz Universität Hannover, Appelstr. 9A, 30167 Hannover, Germany
1 shared publication
Latest Publications
- 1 January 2013
- Published by The Tire Society in Tire Science and Technology
- Vol. 41 (3) , 174-195
A Novel Approach for Thermomechanical Analysis of Stationary Rolling Tires within an ALE–Kinematic Framework
A new computational technique for the thermomechanical analysis of tires in stationary rolling contact is suggested. Different from the existing approaches, the proposed method uses the constitutive description of tire rubber components, such as large deformations, viscous hysteresis, dynamic stiffening, internal heating, and temperature dependency. A thermoviscoelastic constitutive model, which incorporates all the mentioned effects and their numerical aspects, is presented. An isentropic operator-split algorithm, which ensures numerical stability, was chosen for solving the coupled mechanical and energy balance equations. For the stationary rolling-contact analysis, the constitutive model presented and the operator-split algorithm are embedded into the Arbitrary Lagrangian Eulerian (ALE)–relative kinematic framework. The flow of material particles and their inelastic history within the spatially fixed mesh is described by using the recently developed numerical technique based on the Time Discontinuous Galerkin (TDG) method. For the efficient numerical solutions, a three-phase, staggered scheme is introduced. First, the nonlinear, mechanical subproblem is solved using inelastic constitutive equations. Next, deformations are transferred to the subsequent thermal phase for the solution of the heat equations concerning the internal dissipation as a source term. In the third step, the history of each material particle, i.e., each internal variable, is transported through the fixed mesh corresponding to the convective velocities. Finally, some numerical tests with an inelastic rubber wheel and a car tire model are presented.
- 1 January 2013
- Published by The Tire Society in Tire Science and Technology
- Vol. 41 (3) , 174-195
A Novel Approach for Thermomechanical Analysis of Stationary Rolling Tires within an ALE–Kinematic Framework
A new computational technique for the thermomechanical analysis of tires in stationary rolling contact is suggested. Different from the existing approaches, the proposed method uses the constitutive description of tire rubber components, such as large deformations, viscous hysteresis, dynamic stiffening, internal heating, and temperature dependency. A thermoviscoelastic constitutive model, which incorporates all the mentioned effects and their numerical aspects, is presented. An isentropic operator-split algorithm, which ensures numerical stability, was chosen for solving the coupled mechanical and energy balance equations. For the stationary rolling-contact analysis, the constitutive model presented and the operator-split algorithm are embedded into the Arbitrary Lagrangian Eulerian (ALE)–relative kinematic framework. The flow of material particles and their inelastic history within the spatially fixed mesh is described by using the recently developed numerical technique based on the Time Discontinuous Galerkin (TDG) method. For the efficient numerical solutions, a three-phase, staggered scheme is introduced. First, the nonlinear, mechanical subproblem is solved using inelastic constitutive equations. Next, deformations are transferred to the subsequent thermal phase for the solution of the heat equations concerning the internal dissipation as a source term. In the third step, the history of each material particle, i.e., each internal variable, is transported through the fixed mesh corresponding to the convective velocities. Finally, some numerical tests with an inelastic rubber wheel and a car tire model are presented.
- 1 May 2012
- Published by Springer Nature in Computational Mechanics
- Vol. 49 (6) , 769-788
Stabilized numerical solution for transient dynamic contact of inelastic solids on rough surfaces
- 1 May 2012
- Published by Springer Nature in Computational Mechanics
- Vol. 49 (6) , 769-788
Stabilized numerical solution for transient dynamic contact of inelastic solids on rough surfaces
- 20 April 2010
- Published by Wiley in ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
- Vol. 90 (5) , 418-435
On the constitutive modeling of reinforced rubber in a broad frequency domain
A constitutive model for the numerical simulation of rubber behavior in a wide frequency range is presented. The combination between the well known Simo's viscoelastic model and a pseudo‐elastic approach enables for the modeling of inelastic effects at low frequencies, such as nonlinear elasticity, hysteretic behavior, and damage (Mullins effect). The constitutive formulation is derived in detail with an aim of the finite element implementation. Because mechanical response at high frequencies is usually characterized by complex modulus, the developed viscoelastic damage model is extended to high‐frequency analysis. A key idea is the decomposition of the deformation gradient into linear and nonlinear part. The nonlinear part is associated with inelastic deformations established at low frequencies, while the linear contribution plays an important role for dynamic analysis at high frequencies. As a result, the steady‐state response of rubber at a certain static deformation is evaluated and consequently leads to the numerical solution for complex modulus. The computational efficiency of the proposed model can be seen from a good agreement with experimental data.
- 20 April 2010
- Published by Wiley in ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
- Vol. 90 (5) , 418-435
On the constitutive modeling of reinforced rubber in a broad frequency domain
A constitutive model for the numerical simulation of rubber behavior in a wide frequency range is presented. The combination between the well known Simo's viscoelastic model and a pseudo‐elastic approach enables for the modeling of inelastic effects at low frequencies, such as nonlinear elasticity, hysteretic behavior, and damage (Mullins effect). The constitutive formulation is derived in detail with an aim of the finite element implementation. Because mechanical response at high frequencies is usually characterized by complex modulus, the developed viscoelastic damage model is extended to high‐frequency analysis. A key idea is the decomposition of the deformation gradient into linear and nonlinear part. The nonlinear part is associated with inelastic deformations established at low frequencies, while the linear contribution plays an important role for dynamic analysis at high frequencies. As a result, the steady‐state response of rubber at a certain static deformation is evaluated and consequently leads to the numerical solution for complex modulus. The computational efficiency of the proposed model can be seen from a good agreement with experimental data.
- 1 January 2010
- Published by Springer Nature
- p. 123-163
Finite Element Techniques for Rolling Rubber Wheels
- 1 January 2010
- Published by Springer Nature
- p. 123-163
Finite Element Techniques for Rolling Rubber Wheels
- Open Access
- 1 December 2009
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 9 (1) , 317-318
Constitutive Modeling of Rubber Behavior with an Application to Dynamics of Rolling Tires
- 1 December 2009
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 9 (1) , 317-318
Open AccessConstitutive Modeling of Rubber Behavior with an Application to Dynamics of Rolling Tires