SBSven van Berkel

Sven van Berkel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sven van Berkel has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Water Hunting Advanced Terahertz Spectrometer on an Ultra-Small Platform (WHATSUP)

    by Subash Khanal, Adrian Tang, Sven Van Berkel, Jacob Kooi, Choonsup Lee, Alain E. Maestrini, Maria Alonso Del Pino, Theodore Reck, Cecile Jung-Kubiak, Jose V. Siles, et al.


  • Lens Based Kinetic Inductance Detectors With Distributed Dual Polarized Absorbers for Far Infrared Space-Based Astronomy

    by Shahab Oddin Dabironezare, Giulia Conenna, Daan Roos, Dimitry Lamers, Daniela Perez Capelo, Hendrik M. Veen, David J. Thoen, Vishal Anvekar, Stephen J. C. Yates, Willem Jellema, et al.

    Future space-based far infrared astronomical observations require background limited detector sensitivities and scalable focal plane array solutions to realize their vast potential in observation speed. In this work, a focal plane array of lens absorber coupled kinetic inductance detectors (KIDs) is proposed to fill this role. The figures of merit and design guidelines for the proposed detector concept are derived by employing a previously developed electromagnetic spectral modeling technique. Two designs operating at central frequencies of 6.98 and 12 THz are studied. A prototype array of the former is fabricated, and its performance is experimentally determined and validated. Specifically, the optical coupling of the detectors to incoherent distributed sources (i.e., normalized throughput) is quantified experimentally with good agreement with the estimations provided by the model. The coupling of the lens absorber prototypes to an incident plane wave, i.e., aperture efficiency, is also indirectly validated experimentally matching the expected value of 54% averaged over two linear polarizations. The noise equivalent power of the KIDs is also measured with limiting value of $\text{8}\times \text{10}^{-\text{20}}$ $\mathrm{W/\sqrt{Hz}}$ at the bath and radiator temperatures of 130 mK and 2.7 K, respectively, under negligible optical loading.


  • Ultra-Fast Low-Loss SPST Switch Using Planar GaAs Diodes for $G$-Band Radar Receiver Protection

    by Sven van Berkel, Alain E. Maestrini, Robert Lin, Choonsup Lee, Goutam Chattopadhyay, Raquel Rodriguez Monje, Ken B. Cooper

    We report on the development of a high-performance, tunable, solid-state, single-pole-single-throw (SPST) switch operating in G-band for radar applications. Future space-borne, high-power G-band radars may require an SPST switch for receiver protection. We explore a novel solid-state switching architecture based on planar GaAs Schottky diodes. The switch, optimized for operation from 158 to 175 GHz, achieves high isolation by absorbing, reflecting, and frequency multiplying the input power to the 2nd harmonic. A first demonstrator is characterized with an ON-state insertion loss 20 dB at 0 dBm input power. The OFF-state isolation exceeds 43 dB at 0 dBm input power and remains above 30 dB at +17 dBm input power. Depending on the required isolation, the switch is tunable with an instantaneous bandwidth ranging from 300 MHz (for 30 dB isolation) to 13 GHz (for 15 dB isolation). The switch is successfully demonstrated to operate at an ultra-fast 4 MHz switching rate with a switching speed of a few nanoseconds.


  • Characterization of a Far-Infrared Kinetic Inductance Detector Prototype for PRIMA

    by Steven Hailey-Dunsheath, Sven van Berkel, Andrew D. Beyer, Logan Foote, Reinier M. J. Janssen, Henry G. LeDuc, Pierre M. Echternach, Charles M. Bradford, Jochem J. A. Baselmans, Shahab Dabironezare, et al.

    The PRobe far-Infrared Mission for Astrophysics (PRIMA) is under study as a potential far-IR space mission, featuring actively cooled optics, and both imaging and spectroscopic instrumentation. To fully take advantage of the low background afforded by a cold telescope, spectroscopy with PRIMA requires detectors with a noise equivalent power (NEP) better than 1×10−19 WHz−1/2. To meet this goal we are developing large format arrays of kinetic inductance detectors (KIDs) to work across the 25−250 μm range. Here we present the design and characterization of a single pixel prototype detector optimized for 210 μm. The KID consists of a lens-coupled aluminum inductor-absorber connected to a niobium interdigitated capacitor to form a 2 GHz resonator. We have fabricated a small array with 28 KIDs, and we measure the performance of one of these detectors with an optical loading in the 0.01 − 300 aW range. At low loading the detector achieves an NEP of 9×10−20 WHz−1/2 at a10Hzreadoutfrequency, and the lens-absorber system achieves a good optical efficiency. An extrapolation of these measurements suggests this detector may remain photon noise limited at up to 20 fW of loading, offering a high dynamic range for PRIMA observations of bright astronomical sources.


  • Dual-Band Submillimeter-Wave Leaky-Wave Lens Antenna for Heterodyne Cometary Mapping

    by Sjoerd Bosma, Sven L. van Berkel, Maria Alonso-Delpino, Darwin Blanco, Cecile Jung-Kubiak, Robert Lin, Goutam Chattopadhyay, Jose V. Siles, Nuria Llombart

    The next generation of space-based submillimeter-wave remote cometary mapping instruments is being developed at NASA/JPL with two receiver bands at 210–240 GHz and 500–580 GHz. This instrument requires an array of receivers to decrease image acquisition time of velocity-resolved maps of key cometary volatiles. Furthermore, a single shared focal plane is required to save power, mass and space while maintaining overlapping and equal-beamwidth target illumination at both bands. Here, we describe the analysis, synthesis, fabrication and measurement of a prototype dual-band, submillimeter-wave leaky-wave lens antenna intended for a 4×4 focal-plane array (FPA) under a parabolic reflector that achieves these goals. The FPA elements are waveguide-fed leaky-wave lens antennas with a novel stratification including an integrated frequency-selective surface (FSS) that enables 15% operational bandwidths around 225 GHz and 540 GHz simultaneously. The propagating leaky-wave modes in this stratification are studied in detail and the stratification is then synthesized in manufacturable components. A submillimeter-wave lens antenna prototype was fabricated using high-precision silicon microfabrication techniques. Measurements of this prototype demonstrates a performance closely matching simulated results in both frequency bands.


  • Top Cited Papers
    Open Access

    A 25-micrometer Single-Photon-Sensitive Kinetic Inductance Detector

    by Peter K. Day, Nicholas F. Cothard, Christopher Albert, Logan Foote, Elijah Kane, Byeong H. Eom, Ritoban Basu Thakur, Reinier M. J. Janssen, Andrew Beyer, Pierre M. Echternach, et al.

    We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse-counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integrating mode, the detectors remain photon noise limited over more than 6 orders of magnitude in absorbed power from 70 zW to 200 fW, with a limiting noise equivalent power of 4.6 × 10 − 20 W Hz − 1 at 1 Hz. In addition, the detectors are highly stable with flat power spectra under optical load down to 1 mHz. Operational parameters of the detector are determined including the efficiency of conversion of the incident optical power into quasiparticles in the aluminum absorbing element and the quasiparticle self-recombination constant. Published by the American Physical Society 2024


  • MEMS Phase Shifters for THz Beam-Scanning: Demonstration With a 500–600 GHz Phased Array With Leaky-Wave Feeds

    by Sven van Berkel, Subash Khanal, Sofia Rahiminejad, Cecile Jung-Kubiak, Alain Eric Maestrini, Goutam Chattopadhyay

    Beam-scanning capabilities for space-borne submillimeter-wave spectrometers are critical for instrument calibration and field-of-view mapping. However, the lack of low-loss waveguide-integrated phase shifters above 500 GHz has been a significant challenge for realizing Terahertz phased array antennas. Recently developed MEMS-actuated phase shifters have emerged as promising candidates, initially demonstrating a 145 ${}^\circ$ phase shift. As a first demonstration of the efficacy of these phase shifters for electronic beam-steering, we present the design, fabrication, and characterization of a linear, near-Nyquist sampled, 4x1-element phased array operating from 500-600 GHz. The array element is a silicon micro-machined leaky-wave feed based on a Fabry-Pérot cavity to enhance directivity and reduce grating lobes while achieving bandwidth requirements with minimal scan loss. It is shown, through measurements, that this antenna feed is suitable for use in larger 8x1-element arrays for applications that require moderate gain (20 dBi) and scanning ( $\pm 20^\circ$ ) with a fan beam. Furthermore, we present measurement results of a second generation of MEMS phase shifters with an increased measured phase shift up to 350 ${}^\circ$ . A full 360 ${}^\circ$ phase-wrapping capability is desired as this will enable high-gain lens-scanning phased arrays that can be used for future submillimeter-wave spectrometers.


  • 500-750 GHz Contactless Rotating MEMS Single-Pole Double-Throw Waveguide Switch

    by Sofia Rahiminejad, Sven van Berkel, Robert Lin, Subash Khanal, Cecile Jung-Kubiak, Goutam Chattopadhyay, Mina Rais-Zadeh

    This paper presents a Single-Pole Double-Throw MEMS waveguide switch operating at $500-750~GHz$ . The switch consist of a U-bend waveguide surrounded by an electromagnetic bandgap (EBG) surface. The EBG surface is used to isolate the electromagnetic wave without mechanical or electrical contact. The U-bend is placed on a rotating arm, that moves between two positions. The arms movement is controlled by a rotating MEMS motor that can rotate $\pm 4.5^\circ$ at $70~V$ . The switch is fabricated using silicon micromachining and is designed to be in-plane with the connecting waveguides. This allows it to be implemented into a silicon micromachined waveguide network. The waveguide switch has a measured insertion loss less than $2.5~dB$ and an isolation larger than $30~dB$ between $550-750~GHz$ . Since the electromagnetic wave can be routed with the EBG surface instead of needing electrical or mechanical contact, the MEMS waveguide switch can operate without the need for mechanical contact and avoids common MEMS switch issues such as stiction between the switch and its ports. 2024-0059


  • Chessboard Focal Plane Array for a CMOS-Integrated Terahertz Camera

    by Martijn Hoogelander, Sven van Berkel, Eduard Satoshi Malotaux, Maria Alonso-Delpino, Daniele Cavallo, Marco Spirito, Nuria Llombart

    This work presents the development of a focal plane array (FPA) for terahertz imaging applications with a near diffraction-limited resolution achieved through a very tight sampling of the focal plane. The antenna array is integrated with direct-detectors in a 22nm CMOS technology and operates from 200GHz to 600GHz. The tight sampling of the focal plane is realized by using a combination of leaky-wave radiation and a dual-polarized connected array configuration that closely resembles a chessboard. By utilizing both polarizations in the chessboard design, the amount of array elements per unit area is effectively doubled. The geometry of the chessboard array was cooptimized together with that of a silicon, elliptical lens to achieve both a high aperture efficiency and beam overlap. Measurements in the WR2.2 band of a fabricated demonstrator showed that an aperture efficiency of -4.1dB was realized at 400GHz. The average gain roll-off between two diagonally adjacent array elements was measured to be -1.5dB at 400GHz. Compared to the reference configuration of an idealized, equivalently sampled hexagonal FPA, the improvement in gain at the edge-of-coverage yields 1.2dB, which includes the 1.9dB of ohmic losses in the chessboard array. The agreement between measurements and simulations proved to be within 1dB from 325GHz to 475GHz.


  • An $f/0.27$ High-Gain Lens Antenna for Ultrasmall Platforms at THz Frequencies

    by Sven van Berkel, Maria Alonso-Delpino, Cecile Jung-Kubiak, Goutam Chattopadhyay

    The development of a low focal number and low-mass lens antenna is presented that enables Terahertz (THz) spectroscopy applications on ultra-compact platforms. The antenna operates efficiently over a 20% fractional bandwidth, from ${450 GHz}$ to ${550 GHz}$ , with a gain of ${50 dBi}$ at ${500 GHz}$ . The antenna consists of a hyperbolic silicon lens that is placed in a record low focal number configuration ( $f_{\#}=0.27$ ) with respect to an advanced waveguide feed. An incident field-matching analysis is applied to investigate the optimal feed radiation pattern that maximizes the lens aperture efficiency, which would result in a 20% increase in aperture efficiency ( $\gt $ 80%) with respect to a standard open ended waveguide ( $\lt $ 60% aperture efficiency). A multi-layer leaky-wave (LW) stratification is quasi-analytically optimized to approximate the optimal feeding pattern, resulting in a $\gt 70\%$ lens aperture efficiency. An example LW stratification is synthesized using silicon micro-machining technology and is fully characterized in combination with the dielectric lens.