CJCecile Jung-Kubiak

Cecile Jung-Kubiak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Cecile Jung-Kubiak has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Water Hunting Advanced Terahertz Spectrometer on an Ultra-Small Platform (WHATSUP)

    by Subash Khanal, Adrian Tang, Sven Van Berkel, Jacob Kooi, Choonsup Lee, Alain E. Maestrini, Maria Alonso Del Pino, Theodore Reck, Cecile Jung-Kubiak, Jose V. Siles, et al.


  • Flat Silicon Gradient Index Lens With Deep Reactive-Ion-Etched Three-Layer Antireflection Structure for Millimeter and Submillimeter Wavelengths

    by Fabien Defrance, Cecile Jung-Kubiak, John Gill, Sofia Rahiminejad, Theodore Macioce, Jack Sayers, Goutam Chattopadhyay, Sunil R. Golwala

    We present the design, fabrication, and characterization of a 100 mm diameter, flat, gradient-index (GRIN) lens fabricated with high-resistivity silicon, combined with a three-layer anti-reflection (AR) structure optimized for 160–355 GHz. Multi-depth, deep reactive-ion etching (DRIE) enables patterning of silicon wafers with sub-wavelength structures (posts or holes) to locally change the effective refractive index and thus create anti-reflection layers and a radial index gradient. The structures are non-resonant and, for sufficiently long wavelengths, achromatic. Hexagonal holes varying in size with distance from the optical axis create a parabolic index profile decreasing from 3.15 at the center of the lens to 1.87 at the edge. The AR structure consists of square holes and cross-shaped posts. We have fabricated a lens consisting of a stack of five 525 μm thick GRIN wafers and one AR wafer on each face. We have characterized the lens over the frequency range 220–330 GHz, obtaining behavior consistent with Gaussian optics down to —14 dB and transmittance between 75% and 100%.


  • Dual-Band Submillimeter-Wave Leaky-Wave Lens Antenna for Heterodyne Cometary Mapping

    by Sjoerd Bosma, Sven L. van Berkel, Maria Alonso-Delpino, Darwin Blanco, Cecile Jung-Kubiak, Robert Lin, Goutam Chattopadhyay, Jose V. Siles, Nuria Llombart

    The next generation of space-based submillimeter-wave remote cometary mapping instruments is being developed at NASA/JPL with two receiver bands at 210–240 GHz and 500–580 GHz. This instrument requires an array of receivers to decrease image acquisition time of velocity-resolved maps of key cometary volatiles. Furthermore, a single shared focal plane is required to save power, mass and space while maintaining overlapping and equal-beamwidth target illumination at both bands. Here, we describe the analysis, synthesis, fabrication and measurement of a prototype dual-band, submillimeter-wave leaky-wave lens antenna intended for a 4×4 focal-plane array (FPA) under a parabolic reflector that achieves these goals. The FPA elements are waveguide-fed leaky-wave lens antennas with a novel stratification including an integrated frequency-selective surface (FSS) that enables 15% operational bandwidths around 225 GHz and 540 GHz simultaneously. The propagating leaky-wave modes in this stratification are studied in detail and the stratification is then synthesized in manufacturable components. A submillimeter-wave lens antenna prototype was fabricated using high-precision silicon microfabrication techniques. Measurements of this prototype demonstrates a performance closely matching simulated results in both frequency bands.


  • MEMS Phase Shifters for THz Beam-Scanning: Demonstration With a 500–600 GHz Phased Array With Leaky-Wave Feeds

    by Sven van Berkel, Subash Khanal, Sofia Rahiminejad, Cecile Jung-Kubiak, Alain Eric Maestrini, Goutam Chattopadhyay

    Beam-scanning capabilities for space-borne submillimeter-wave spectrometers are critical for instrument calibration and field-of-view mapping. However, the lack of low-loss waveguide-integrated phase shifters above 500 GHz has been a significant challenge for realizing Terahertz phased array antennas. Recently developed MEMS-actuated phase shifters have emerged as promising candidates, initially demonstrating a 145 ${}^\circ$ phase shift. As a first demonstration of the efficacy of these phase shifters for electronic beam-steering, we present the design, fabrication, and characterization of a linear, near-Nyquist sampled, 4x1-element phased array operating from 500-600 GHz. The array element is a silicon micro-machined leaky-wave feed based on a Fabry-Pérot cavity to enhance directivity and reduce grating lobes while achieving bandwidth requirements with minimal scan loss. It is shown, through measurements, that this antenna feed is suitable for use in larger 8x1-element arrays for applications that require moderate gain (20 dBi) and scanning ( $\pm 20^\circ$ ) with a fan beam. Furthermore, we present measurement results of a second generation of MEMS phase shifters with an increased measured phase shift up to 350 ${}^\circ$ . A full 360 ${}^\circ$ phase-wrapping capability is desired as this will enable high-gain lens-scanning phased arrays that can be used for future submillimeter-wave spectrometers.


  • 500-750 GHz Contactless Rotating MEMS Single-Pole Double-Throw Waveguide Switch

    by Sofia Rahiminejad, Sven van Berkel, Robert Lin, Subash Khanal, Cecile Jung-Kubiak, Goutam Chattopadhyay, Mina Rais-Zadeh

    This paper presents a Single-Pole Double-Throw MEMS waveguide switch operating at $500-750~GHz$ . The switch consist of a U-bend waveguide surrounded by an electromagnetic bandgap (EBG) surface. The EBG surface is used to isolate the electromagnetic wave without mechanical or electrical contact. The U-bend is placed on a rotating arm, that moves between two positions. The arms movement is controlled by a rotating MEMS motor that can rotate $\pm 4.5^\circ$ at $70~V$ . The switch is fabricated using silicon micromachining and is designed to be in-plane with the connecting waveguides. This allows it to be implemented into a silicon micromachined waveguide network. The waveguide switch has a measured insertion loss less than $2.5~dB$ and an isolation larger than $30~dB$ between $550-750~GHz$ . Since the electromagnetic wave can be routed with the EBG surface instead of needing electrical or mechanical contact, the MEMS waveguide switch can operate without the need for mechanical contact and avoids common MEMS switch issues such as stiction between the switch and its ports. 2024-0059


  • A Transmit Lens Array With High-Gain and Beam-Steering Capabilities at Submillimeter Wavelengths

    by Maria Alonso-Delpino, Sjoerd Bosma, Cecile Jung-Kubiak, Juan Bueno, Goutam Chattopadhyay, Nuria Llombart

    This paper introduces a novel transmit lens array with beam-steering capabilities for submillimeter-wave space instruments. The transmit array consists of two sparse silicon lens antenna arrays connected by a waveguide array, in which active components can potentially be integrated, arranged in a hexagonal grid. The upper lens array is mechanically actuated to achieve dynamic beam-steering. The bottom lens array is fed coherently by a quasi-optical (QO) power distribution lens antenna. This antenna is capable of distributing power to a multi-pixel lens array in a hexagonal configuration with a power coupling efficiency of approximately 60%. The transmit lens array and QO power distribution lens antennas are based on a recently developed multi-mode leaky-wave feed, which results in lens antenna aperture efficiencies of nearly 80%. A model based on high-frequency techniques has been implemented to design and optimize the complete architecture, allowing to evaluate its directivity and gain. We have fabricated and measured a prototype based on 7-lens elements with excellent agreement to the performances estimated by the model. This paper demonstrates for the first time an array architecture that reaches 36 dBi directivity, 32dBi gain and +/-25 degrees scanning with 3 dB scan loss over a 450-650 GHz band.


  • An $f/0.27$ High-Gain Lens Antenna for Ultrasmall Platforms at THz Frequencies

    by Sven van Berkel, Maria Alonso-Delpino, Cecile Jung-Kubiak, Goutam Chattopadhyay

    The development of a low focal number and low-mass lens antenna is presented that enables Terahertz (THz) spectroscopy applications on ultra-compact platforms. The antenna operates efficiently over a 20% fractional bandwidth, from ${450 GHz}$ to ${550 GHz}$ , with a gain of ${50 dBi}$ at ${500 GHz}$ . The antenna consists of a hyperbolic silicon lens that is placed in a record low focal number configuration ( $f_{\#}=0.27$ ) with respect to an advanced waveguide feed. An incident field-matching analysis is applied to investigate the optimal feed radiation pattern that maximizes the lens aperture efficiency, which would result in a 20% increase in aperture efficiency ( $\gt $ 80%) with respect to a standard open ended waveguide ( $\lt $ 60% aperture efficiency). A multi-layer leaky-wave (LW) stratification is quasi-analytically optimized to approximate the optimal feeding pattern, resulting in a $\gt 70\%$ lens aperture efficiency. An example LW stratification is synthesized using silicon micro-machining technology and is fully characterized in combination with the dielectric lens.


  • Open Access

    Silicon Micromachined Waveguide Circuit for a 2 THz Schottky Receiver: Progress and Challenges

    by Christine P. Chen, Cecile Jung-Kubiak, Robert H. Lin, Darren J. Hayton, Alain E. Maestrini, Jose Siles, Choonsup Lee, Alejandro Peralta, Imran Mehdi

    Space instruments that operate in the THz range can enable unique measurements for a better understanding of the chemical and physical processes taking place in our Universe. One such application of this technology is a compact 2.06 THz receiver that can measure the ionized oxygen line to determine wind velocity in Earth's upper atmosphere. Metal machined waveguide circuits have long been utilized to build and demonstrate functional receivers in the submillimeter-wave range. However, as the operational frequency is increased, extremely challenging requirements are placed on metal machining in terms of the required precision, surface roughness, and alignment tolerance. This work describes the design and implementation of the first-of-its-kind, vertically-integrated, 2-THz Schottky diode mixer using precise silicon micromachine technology. A traditional e-plane split waveguide package is re-designed to utilize the three-dimensional (3-D) capability of stacking silicon micromachined parts. The silicon microfabrication process has been optimized to produce smooth and precise features for packaging a 2 THz subharmonic GaAs Schottky diode mixer, providing surface roughness better than 1-micron rms with less than 5% variation on critical dimensions. The subharmonic mixer and a fully solid-state local oscillator (LO) chain is currently being implemented to validate silicon micromachining for THz packaging. The impact of micromachining variation on mixer performance is explored through simulations over a range of dimensions on the most sensitive regions of the Si module.


  • A Low-Loss Silicon MEMS Phase Shifter Operating in the 550-GHz Band

    by Sofia Rahiminejad, Maria Alonso-Delpino, Theodore J. Reck, Alejandro Peralta, Robert Lin, Cecile Jung-Kubiak, Goutam Chattopadhyay

    This article presents a low-loss silicon microelectrical mechanical system (MEMS) phase shifter operating in the 500-600 GHz band. The phase shifter consists of a 30-μm thick perforated silicon slab that is moved in and out of a waveguide in the E-plane with a large deflection MEMS actuator. By implementing different hexagonal patterns in the silicon slab, a stepped permittivity is created to impedance match, and thus, reduce return loss. When the silicon slab is inserted into the waveguide, the phase velocity of the incoming wave is decreased, thus resulting in different phase shifts depending on the position of the slab inside the waveguide. The MEMS phase shifter is fully actuated at around 50 V and can move up to ±95 μm, depending on the applied voltage. The insertion loss, when the maximum phase shift is achieved, is measured to be 1.8 dB, compared to a 1.6-dB insertion loss for a waveguide of equivalent length. The return loss is better than 18 dB for the desired band. The measured phase shift, with the slab fully inserted into the waveguide at 550 GHz was 145 ° . The MEMS phase shifter enables a variety of applications including phased array antenna systems with scanning capability for mapping of planetary surfaces with an electronically steerable antenna.


  • Open Access

    Sub-Orbital Flight Demonstration of a 183/540–600 GHz Hybrid CMOS-InP and CMOS-Schottky-MEMS Limb-Sounder

    by Adrian Tang, Maria Alonso Del Pino, Yanghyo Kim, Yan Zhang, Theodore Reck, Cecile Jung-Kubiak, Deacon Nemchick, Logan Dyer, Gabriel Virbila, Goutam Chattopadhyay, et al.

    This paper presents an overview of a sub-orbital flight demonstration with a 183 GHz and 540–600 GHz limb-sounding instrument aboard a stratospheric ballooncraft. The 183 GHz band provides soundings of stratospheric H $_{2}$ O and is implemented with a hybrid CMOS-InP receiver architecture which provides excellent sensitivity while remaining compact (162 g) and offering an extremely low DC power consumption (0.62 W). The 540–600 GHz channel sounds stratospheric O $_{3}$ and uses a combination of a CMOS local oscillator, GaAs Schottky mixer and micro-electro-mechanical-system (MEMS) RF switch for calibration, again offering competitive form factor (1.4 Kg) and low DC power consumption (6.6 W) compared to prior instruments. The instrument was flown on the NASA Reck-Tang Limb-sounding Experiment (ReckTangLE) ballooncraft and performed atmospheric soundings across New Mexico and Northwestern Texas on Oct. 17 2019.