DGDavid Gibus

David Gibus

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David Gibus has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Increase of the electromechanical coupling of piezoelectric vibration harvesters through lateral bars

    by David Gibus, Grégoire Forges, Hélène Debéda, Pierre Gasnier, Adrien Badel

    To enhance the performance of vibration energy harvesters, it is essential to maximise the electromechanical coupling coefficient k² of piezoelectric devices. This enables sufficient harvested power and tuning capability of the resonant frequency through electrical methods. While much literature treats the optimisation of piezoelectric cantilevers, the optimisation range is usually limited by the transverse coupling coefficient k31² of the material. This work introduces an innovative solution to extend the optimisation range and increase the coupling coefficient of piezoelectric cantilevers. This is achieved by minimising lateral strain in the beam using lateral bars to maximise the equivalent material coupling coefficient. The theoretical basis of this innovation is demonstrated through the exploitation of the constitutive equations of piezoelectric materials. The interest of the addition of lateral bars to increase the coupling coefficient is demonstrated and studied with simulations based on the finite elements method. Finally, a proof of concept is realised using a aluminum cantilever prototype integrating a lead-free KNaNbO3 (KNN) piezoelectric material. It is tested under vibration at 0.1 m/s² with variable resistive loads. The results show that the coupling coefficient increases by 30% and the relative frequency bandwidth by 32% with resistive tuning of the resonant frequency, by fixing eight steel bars to the cantilever. The designed prototype is a highly performant lead-free vibration energy harvester. It produces a maximum power of 49.9 μW at resonance, and its normalised power density is equal to 16.5 mW/G²/cm³. Its relative frequency bandwidth is equal to 3.1%.

  • Conception de dispositifs piézoélectriques fortement couplés pour la récupération d’énergie vibratoire large bande

    by David Gibus

    La récupération d’énergie vibratoire s’intéresse à utiliser les vibrations afin d’alimenter des capteurs sans fil communicants à des emplacements où les piles et les batteries ne peuvent être employées ou changées. Dans ce contexte, l’utilisation de structures résonantes piézoélectriques permet de récupérer des puissances électriques importantes. Cependant, ces performances ne sont atteintes que sur une bande fréquentielle très limitée (typiquement quelques pourcents de la fréquence de résonance du récupérateur). En réponse à cette problématique, des techniques électriques capables d’ajuster la fréquence de résonance de récupérateurs piézoélectriques sont développées depuis quelques années. Pour atteindre une bande de fréquence de fonctionnement intéressante grâce à ces techniques, les récupérateurs piézoélectriques doivent présenter un très fort couplage électromécanique global. Cette thèse porte donc sur la modélisation, la conception et la caractérisation de récupérateurs d’énergie piézoélectriques très fortement couplés pour la récupération d’énergie vibratoire large bande. Dans cette thèse, il est montré que la poutre encastrée-libre (cantilever) comportant une longue masse mobile à son extrémité libre est la configuration la plus pertinente pour optimiser le coefficient de couplage électromécanique global. La proposition puis l’exploitation d’un modèle analytique dédié, nous a permis de démontrer l’intérêt de la longue masse. Ce modèle permet notamment d’étudier les aspects électromécaniques de manière adimensionnelle et de dresser des conclusions générales sur le dimensionnement de poutres très fortement couplées. Sur un autre aspect, les travaux réalisés montrent que, pour les matériaux piézoélectriques couramment utilisés en récupération d’énergie, le coefficient de couplage électromécanique global d’une poutre est maximisé lorsque les déformations latérales sont minimisées. Cet effet peut être obtenu par la maximisation de la largeur de la poutre (état de déformation plane) ou alors par la fixation de barreaux latéraux sur cette dernière. Afin de valider expérimentalement l’intérêt d’une longue masse mobile, un récupérateur à base de matériau monocristallin très fortement couplé (PMN-PT) est proposé. Deux récupérateurs à base de matériau céramique (PZT) sont également proposés afin de montrer l’influence de la largeur de la poutre sur le coefficient de couplage électromécanique global. Les récupérateurs testés avec des charges résistives en conditions vibratoires laissent présager de grands potentiels en matière d’ajustement de fréquences (plus de 10% de leurs fréquences de résonance). Dans le cadre de ces travaux de recherche, un des prototypes a notamment été testé avec un circuit de gestion électrique dédié permettant un ajustement automatique sur une large bande de fréquences (plus de 17% de la fréquence de résonance). Pour finir, un modèle phénoménologique non-linéaire est présenté à la fin de cette thèse. Il permet de considérer et de comprendre l’influence des pertes mécaniques et diélectriques sur le comportement et les performances (puissance récupérée et bande passante) des récupérateurs

  • Analytical design of 2-DOF piezoelectric cantilevers for vibration energy harvesting

    by David Gibus, Adrien Morel, Pierre Gasnier, Ludovic Charleux, Fabien Formosa, Adrien Badel


  • A Low-Power MCU-Based MPPT Architecture With a Fast Impedance Measurement for Broadband Piezoelectric Energy Harvesting

    by Nicolas Decroix, Pierre Gasnier, Adrien Morel, David Gibus, Adrien Badel

    This article presents the combination of a fast and robust maximum power point tracking algorithm called two-load characterization method (TLCM) and an efficient energy harvesting interface called resistive short circuit (RSC) for broadband piezoelectric energy harvesting. The proposed architecture is implemented using a low-power microcontroller (STM32L4) with its associated discrete electronics. The TLCM consists of an embedded impedance measurement that computes the piezoelectric impedance after two successive phase and voltage measurements. It calculates the optimal load impedance as the complex conjugate of the generator output impedance. It is up to 13 times faster than classical Perturbation and Observation algorithms. The complex conjugate impedance is then emulated by the RSC interface: a Flyback converter emulates a resistive load while a variable duration short-circuit following the zero voltage instant emulates a capacitive load. This two-parameters electrical interface allows a 9.4% harvested power bandwidth, which is 35% more than for a fixed resistor. The whole system is tested at 0.5 m/s 2 peak ambient acceleration and between 26 Hz to 30 Hz in standalone operation. In those conditions, the proposed system showed an end-to-end efficiency in the 65% to 80% range while consuming 21.5 μW to 28.5 μW, with a measurement duty cycle of 13%. It harvests a net maximum power of 157 μW with a peak extracted power of 235 μW.


  • Power boundaries in resonant electrodynamic wireless power transfer systems

    by Adrien Morel, David Gibus, Adrien Badel

    This article focuses on deriving the maximum power that can be transmitted using recent wireless power transfer technology based on an electrodynamic receiver. Analytical derivations reveal two main constraints that can limit transmitted power: the magnetic field safety limit and the maximum stress before breaking the receiver. From these limits, expressions of maximum magnetic forces and power are derived, providing physical insights on how to optimize the transmitted power. Interestingly, the optimal electrical condition and the optimal electromechanical efficiency differ when maximizing the transmitted power under each constraint. In the final section of the paper, the proposed theoretical boundaries are applied to two types of receivers, based on either electromagnetic or piezoelectric transducers. The results demonstrate that the maximum power density achievable with both receivers is inherently limited (3) under realistic assumptions regarding electromechanical coupling and electrical circuitry. This value is smaller than some previously reported results involving rotating or magnetoelectric solutions, indicating that clamped-free beams are not the optimal solution for electrodynamic wireless power transfer. This analysis can be extended to other types of receivers and will be useful for optimizing, sizing, and assessing any technological solution for wireless power transfer.


  • Predictive lumped model for a tunable bistable piezoelectric energy harvester architecture

    by Aya Benhemou, David Gibus, Thomas Huguet, Adrien Morel, Quentin Demouron, Camille Saint-Martin, Emile Roux, Ludovic Charleux, Adrien Badel

    In this article, we propose the modelling of a tunable bistable piezoelectric energy harvester (or BPEH) architecture. The latter is a type of ambient energy converter that continues to gain attention due to their wideband frequency response. As the non-linear dynamics of BPEHs imply significant modeling complexity, dynamic lumped models are necessary to predict BPEHs’ dynamic response and should fit the type of architecture studied. The BPEH architecture of interest uses post-buckled beams to create bistability and an amplified piezoelectric actuator (or APA) to convert the ambient vibrations. To date, no dynamic lumped models have been found in existing literature that account for both the electromechanical conversion and the dynamic behavior of buckled beams, with a specific focus on their axial and bending stiffness, for this BPEH architecture. Additionally, the proposed BPEH architecture offers buckling level tunability, which is achieved using an additional APA. Hence, the aim of this paper is to propose a new lumped model for a BPEH architecture that considers the effect of the post-buckled beams’ stiffness and of the additional APA through an elasticity factor κ ― . This lumped model is established using Euler Lagrange equations and is experimentally validated on a tunable BPEH prototype. This validation shows an average relative error below 6% between the model predictions and experimental dynamic response of the prototype to an ascending frequency sweep, compared to an average relative error that is around 14% for the model proposed in literature. Moreover, numerical simulations using the proposed model lead to the conclusion that there is an optimal elasticity factor κ ― that ensures the maximum power output while maintaining the frequency bandwidth.


  • Increasing the robustness of electrodynamic WPT systems with hybrid electromechanical transduction

    by Adrien Ameye, Nicolas Decroix, David Gibus, Nicolas Garraud, Pierre Gasnier, Adrien Badel

    In this paper, we compare the electrical damping capability of low-frequency electrodynamic wireless power transmission (EWPT) systems based on a resonant electromechanical receiver in the context of increasing their mechanical robustness. This study is carried out for piezoelectric (PE) and electrodynamic (ED) transducers. The receiver studied, excited by a distant transmitter coil, consists of a magnet and a resonant cantilever beam, and both ED and PE transducers (hybrid system). A strategy based on dual energy conversion is proposed that takes advantage of each transduction characteristic: the receiver with high-quality-factor is sufficiently sensitive to very weak excitation fields far from the transmitter, while it is robust to strong magnetic fields close to the transmitter by damping its motion. This approach is particularly relevant to increase the robustness of resonant receivers powering moving sensor nodes as the field strength seen by the receiver can vary greatly. This paper aims to evaluate three energy transduction strategies (PE-only, ED-only and hybrid) to both harvest more power and increase EWPT systems robustness by overdamping. An analytical model of the system is presented along with comparison with experimental results from a 71.7 cm3 prototype. When the motion amplitude is limited to 0.7 mm to limit aging, the receiver output 19 mW which outperforms the PE and ED modes alone by a factor of 1.5 and 1.8, respectively. Furthermore, the hybrid receiver can limit the amplitude of motion to 0.7 mm under a magnetic field up to 3.6 mT, which is 2.5 and 1.2 times higher than PE and ED alone, respectively.


  • Combining orbit jump and potential wells optimizations for nonlinear vibration energy harvesters

    by C Saint-Martin, A Morel, L Charleux, E Roux, D Gibus, A Benhemou, A Badel

    Nonlinear vibration energy harvesters (VEHs) are widely used for scavenging vibrational energy due to their broadband behaviors. However, they exhibit multiple orbits of different powers for a given excitation, including low-power orbits that might limit their performance. To address this issue and enhance nonlinear VEHs performance, various studies have defined orbit jump strategies to transition from low-power to high-power orbits. Another way to maximize the power of nonlinear VEHs is to optimize their geometry by finely engineering their potential wells (PWs). In this letter, we propose an orbit jump strategy for bistable VEHs that combines the two latter approaches, i.e. that simultaneously optimizes their PWs while jumping from low-power to high-power orbits. This orbit jump strategy is optimized using a numerical criterion that takes into account the robustness of the jumps and the invested energy. The proposed orbit jump strategy has been experimentally validated for vibration frequencies between 30 and 60 Hz. It is shown that the proposed approach can increase the power by an average of 121 times over the considered frequency range. Compared to traditional orbit jump strategies, the proposed approach, which combines orbit jumping and PWs optimizations, increases by up to three times the harvested power.


  • A comparative analysis of parallel SSHI and SEH for bistable vibration energy harvesters

    by Quentin Demouron, Adrien Morel, David Gibus, Aya Benhemou, Adrien Badel

    The present work focuses on ambient vibration energy harvesting. Specifically, this article deals with bistable piezoelectric energy harvesters (PEHs) which exhibits a wider bandwidth than linear oscillators. These complex systems require an energy extraction circuit (EEC) to rectify their voltage to supply power to autonomous sensors. This EEC needs to be optimized in order to increase the harvested power and even the bandwidth of PEHs. Because of the complex dynamics of bistable PEHs, there is a lack of simple and physically-insightful models in the literature that would allow the understanding and optimization of the extraction circuit. To address this issue, the present work derives closed-form models of a bistable PEH coupled to a passive and an active synchronous EEC: respectively the standard energy harvesting (SEH) circuit and the parallel synchronized switch harvesting on inductor (P-SSHI) circuit. Experimental measurements conducted on a custom bistable PEH demonstrate the validity of the proposed models with a relative error lower than 15% on the harvested power and the bandwidth. The proposed models allow to easily understand the influence of the P-SSHI circuit on the dynamics of a bistable PEH. Moreover, a comparison of the performance of the SEH and the P-SSHI circuits, valid for any bistable generator, is proposed. The latter shows that under low electromechanical coupling and low acceleration amplitude the P-SSHI circuit leads to multiply the maximum harvested power up to 4.3 compared to the SEH circuit, and the bandwidth by a factor of 2.3.