Di Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Di Wang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Ali Emadi
Department of Electrical and Computer Engineering and McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON L8S 4L8, Canada
7 shared publications - Linke Zhou
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
7 shared publications - Giorgio Pietrini
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
4 shared publications - Jiaming An
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
4 shared publications Mikhail Goykhman
Eaton Aerospace, LLC, Eaton Corporation, Irvine, CA, USA
4 shared publicationsPiranavan Suntharalingam
Eaton Aerospace, LLC, Eaton Corporation, Irvine, CA, USA
4 shared publications
Latest Publications
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP, 1
DC EMI Filter With Characteristic Matching to Enhance Insertion Loss and Mitigate Mid-Frequency Degradation for High-Power Motor Drive Systems
EMI filters are a primary solution for mitigating conducted EMI emissions in high-power variable-speed motor drive (VSD) systems. However, significant mid-frequency (MF) degradation has been observed when a DC EMI filter is integrated into a VSD system. This paper investigates and identifies the mechanism behind this degradation, revealing that cross-coupling between the non-ideal characteristics of the filter output and the inverter input initiates the issue, with a pronounced mismatch in their MF characteristics accelerating the degradation process, eventually resulting in near-complete filter failure. To address this challenge, a two-stage y-cap design with characteristic matching is proposed. Through matching with the inverter input, the first stage achieves effective decoupling and mitigates MF degradation, while the second stage, in combination with a common-mode (CM) inductor, provides sufficient attenuation. Extensive experiments validate the effectiveness of the proposed characteristic-matching DC EMI filter, demonstrating an additional improvement of over 20 dB in CM insertion loss and 30 dB in DM insertion loss within the MF degradation region. This improvement ensures that the conducted EMI emissions of the high-power VSD system comply with the DO-160G standard limits.
- 4 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. PP, 1
DC EMI Filter With Characteristic Matching to Enhance Insertion Loss and Mitigate Mid-Frequency Degradation for High-Power Motor Drive Systems
EMI filters are a primary solution for mitigating conducted EMI emissions in high-power variable-speed motor drive (VSD) systems. However, significant mid-frequency (MF) degradation has been observed when a DC EMI filter is integrated into a VSD system. This paper investigates and identifies the mechanism behind this degradation, revealing that cross-coupling between the non-ideal characteristics of the filter output and the inverter input initiates the issue, with a pronounced mismatch in their MF characteristics accelerating the degradation process, eventually resulting in near-complete filter failure. To address this challenge, a two-stage y-cap design with characteristic matching is proposed. Through matching with the inverter input, the first stage achieves effective decoupling and mitigates MF degradation, while the second stage, in combination with a common-mode (CM) inductor, provides sufficient attenuation. Extensive experiments validate the effectiveness of the proposed characteristic-matching DC EMI filter, demonstrating an additional improvement of over 20 dB in CM insertion loss and 30 dB in DM insertion loss within the MF degradation region. This improvement ensures that the conducted EMI emissions of the high-power VSD system comply with the DO-160G standard limits.
- Open Access
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 7, 843-869
Overview of Thermal Modeling and Monitoring for SiC Multi-Chip Power Modules
Silicon carbide (SiC) multi-chip power modules (MCPMs) have emerged as critical components in high-power and high-reliability power electronics due to their superior integration capability and performance potential. However, the inherent structural complexity and intense thermal coupling effects pose significant challenges in thermal modeling and monitoring. This paper provides a comprehensive review of recent advances in thermal modeling and monitoring methods tailored specifically for SiC MCPMs. Thermal modeling approaches are thoroughly analyzed, highlighting their respective advantages and limitations in terms of computational efficiency, accuracy, and applicability. Additionally, various direct and indirect thermal monitoring techniques are discussed, examining their practical implementations, strengths, and constraints. To address existing challenges in thermal modeling and monitoring of SiC MCPMs, future research directions are identified. Challenges and opportunities in thermal modeling and monitoring have been specifically analyzed and discussed for SiC MCPMs with advanced packaging technologies. This review not only summarizes the state-of-the-art methodologies but also identifies potential research pathways to enhance the accuracy and robustness of thermal modeling and monitoring for SiC MCPMs. Beyond thermal modeling and monitoring, this paper also serves as a valuable reference for advancing SiC MCPM research in thermal management, packaging design, and lifetime assessment.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 7, 843-869
Open AccessOverview of Thermal Modeling and Monitoring for SiC Multi-Chip Power Modules
Silicon carbide (SiC) multi-chip power modules (MCPMs) have emerged as critical components in high-power and high-reliability power electronics due to their superior integration capability and performance potential. However, the inherent structural complexity and intense thermal coupling effects pose significant challenges in thermal modeling and monitoring. This paper provides a comprehensive review of recent advances in thermal modeling and monitoring methods tailored specifically for SiC MCPMs. Thermal modeling approaches are thoroughly analyzed, highlighting their respective advantages and limitations in terms of computational efficiency, accuracy, and applicability. Additionally, various direct and indirect thermal monitoring techniques are discussed, examining their practical implementations, strengths, and constraints. To address existing challenges in thermal modeling and monitoring of SiC MCPMs, future research directions are identified. Challenges and opportunities in thermal modeling and monitoring have been specifically analyzed and discussed for SiC MCPMs with advanced packaging technologies. This review not only summarizes the state-of-the-art methodologies but also identifies potential research pathways to enhance the accuracy and robustness of thermal modeling and monitoring for SiC MCPMs. Beyond thermal modeling and monitoring, this paper also serves as a valuable reference for advancing SiC MCPM research in thermal management, packaging design, and lifetime assessment.
- 23 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 3753-3766
Design of a High-Power-Density 1-MVA Three-Level Inverter for Electric Aircraft Propulsion
The development of megavolt-ampere (MVA)-class three-level inverters has become the focus in advancing electric aircraft propulsion (EAP) systems. In this article, a highly power-dense three-level inverter design is demonstrated, targeting 1-MVA output power at a 1.5-kV dc bus voltage. The design focuses on optimizing the inverter’s power density at both the system and component levels, including topology and component selection, power stage layout, lightweight bus bar design, as well as cooling system and electromagnetic interference (EMI) filter designs. Through comprehensive optimization, the designed inverter achieves a total weight of only 22.57 kg and a gravimetric power density of over 44.3 kVA/kg, setting a new benchmark for MVA-class EAP. A prototype has been fabricated and tested under laboratory conditions, with experimental results validating both the electrical and thermal performance of the proposed inverter, confirming its capability for high-efficiency operation in demanding aerospace environments.
- 23 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (2) , 3753-3766
Design of a High-Power-Density 1-MVA Three-Level Inverter for Electric Aircraft Propulsion
The development of megavolt-ampere (MVA)-class three-level inverters has become the focus in advancing electric aircraft propulsion (EAP) systems. In this article, a highly power-dense three-level inverter design is demonstrated, targeting 1-MVA output power at a 1.5-kV dc bus voltage. The design focuses on optimizing the inverter’s power density at both the system and component levels, including topology and component selection, power stage layout, lightweight bus bar design, as well as cooling system and electromagnetic interference (EMI) filter designs. Through comprehensive optimization, the designed inverter achieves a total weight of only 22.57 kg and a gravimetric power density of over 44.3 kVA/kg, setting a new benchmark for MVA-class EAP. A prototype has been fabricated and tested under laboratory conditions, with experimental results validating both the electrical and thermal performance of the proposed inverter, confirming its capability for high-efficiency operation in demanding aerospace environments.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (5) , 7321-7334
Near-Magnetic Interference in Rogowski Coil for Power Electronic Applications: Mechanism and Mitigation
Rogowski coil (RC), valued for its high bandwidth, galvanic isolation, and ease of integration, is widely employed in high-speed integrated power electronics. However, near-magnetic interference (NMI) arising from inductive coupling with adjacent current sources is often underestimated, which undermines the RC’s robustness in crucial applications such as characterization, protection, and control. This article first reveals the inevitability of NMI in RCs. Building upon this, the mutual inductance equation between the RC and external interference sources is derived in detail, establishing a solid theoretical foundation for efficient and quantitative interference evaluation. The derivation methodology is further generalized to arbitrary points in space, allowing for the quantitative analysis of the effect when the circuit under test (CUT) is offset from the RC’s center. Theoretical analysis highlights the number of turns as a key factor, demonstrating that appropriately increasing it can effectively mitigate the influence of both external NMI and internal CUT eccentricity. The inherent design tradeoff between measurement bandwidth and interference immunity is further analyzed. Design guidelines for establishing the upper and lower limits of the number of turns are derived, and the differential mode rejection ratio is introduced as an intuitive metric to quantify the interference suppression capability. The accuracy of the proposed NMI model and the effectiveness of mitigation strategies are corroborated by Ansys Q3D simulations and extensive frequency- and time-domain experiments.
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (5) , 7321-7334
Near-Magnetic Interference in Rogowski Coil for Power Electronic Applications: Mechanism and Mitigation
Rogowski coil (RC), valued for its high bandwidth, galvanic isolation, and ease of integration, is widely employed in high-speed integrated power electronics. However, near-magnetic interference (NMI) arising from inductive coupling with adjacent current sources is often underestimated, which undermines the RC’s robustness in crucial applications such as characterization, protection, and control. This article first reveals the inevitability of NMI in RCs. Building upon this, the mutual inductance equation between the RC and external interference sources is derived in detail, establishing a solid theoretical foundation for efficient and quantitative interference evaluation. The derivation methodology is further generalized to arbitrary points in space, allowing for the quantitative analysis of the effect when the circuit under test (CUT) is offset from the RC’s center. Theoretical analysis highlights the number of turns as a key factor, demonstrating that appropriately increasing it can effectively mitigate the influence of both external NMI and internal CUT eccentricity. The inherent design tradeoff between measurement bandwidth and interference immunity is further analyzed. Design guidelines for establishing the upper and lower limits of the number of turns are derived, and the differential mode rejection ratio is introduced as an intuitive metric to quantify the interference suppression capability. The accuracy of the proposed NMI model and the effectiveness of mitigation strategies are corroborated by Ansys Q3D simulations and extensive frequency- and time-domain experiments.
- 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (4) , 4643-4658
Practical Thermal Solution for 1-MVA Three-Level ANPC Inverter in Aerospace Applications
In aerospace applications, high-performance cooling systems are essential to ensure the reliability of power inverters under extreme operating conditions. This paper presents the design and analysis of a practical pin-fin liquid cooling system for a 1 MVA silicon carbide (SiC)-based three-level active neutral point clamped (ANPC) inverter. The thermal and hydraulic performance was evaluated through finite element analysis (FEA) models of SiC power modules and computational fluid dynamics (CFD) simulations, confirming the heat transfer efficiency required for aerospace environments at 70°C coolant temperature. The cooling solution leverages a staggered pin-fin arrangement to improve heat transfer efficiency while maintaining manufacturability and cost-effectiveness. Two different cold plate configurations—series and parallel—were compared for uniform fluid distribution and cost-effectiveness. Special attention was also given to sealing design, ensuring reliability in preventing coolant leakage. The system effectively manages over 7.2 kW power loss, maintaining junction temperature Tj safely below the 150°C limit. Experimental tests validated the cooling system’s hydraulic and thermal performance, demonstrating its ability to handle high power losses with low pressure drop, making it a robust and cost-effective solution for high-power aerospace inverters.
- 30 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (4) , 4643-4658
Practical Thermal Solution for 1-MVA Three-Level ANPC Inverter in Aerospace Applications
In aerospace applications, high-performance cooling systems are essential to ensure the reliability of power inverters under extreme operating conditions. This paper presents the design and analysis of a practical pin-fin liquid cooling system for a 1 MVA silicon carbide (SiC)-based three-level active neutral point clamped (ANPC) inverter. The thermal and hydraulic performance was evaluated through finite element analysis (FEA) models of SiC power modules and computational fluid dynamics (CFD) simulations, confirming the heat transfer efficiency required for aerospace environments at 70°C coolant temperature. The cooling solution leverages a staggered pin-fin arrangement to improve heat transfer efficiency while maintaining manufacturability and cost-effectiveness. Two different cold plate configurations—series and parallel—were compared for uniform fluid distribution and cost-effectiveness. Special attention was also given to sealing design, ensuring reliability in preventing coolant leakage. The system effectively manages over 7.2 kW power loss, maintaining junction temperature Tj safely below the 150°C limit. Experimental tests validated the cooling system’s hydraulic and thermal performance, demonstrating its ability to handle high power losses with low pressure drop, making it a robust and cost-effective solution for high-power aerospace inverters.
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1135-1152
Design and Characterization of Bus Bars for 1-MVA Three-Level ANPC Inverters in Aerospace Applications
Bus bars play a crucial role in connecting components and are widely utilized in high-power inverters. Efforts have been made in the past to reduce the stray inductance of bus bars. In the case of multilevel inverters, which involve more complex commutation loops than their two-level counterparts, the physical layout and parasitic parameters of bus bars are particularly important. Furthermore, for novel and more demanding applications such as aerospace, bus bars need to be designed to be lightweight while ensuring a partial discharge (PD)-free insulation performance. Given the challenging cooling condition in aerospace applications, the thermal design and cooling performance of bus bars also warrant considerable attention. This article presents a comprehensive design approach of a laminated bus bar for a 1.5-kV 1-MVA three-level active neutral-point-clamped (ANPC) inverter for electrified aircraft propulsion. With the proposed design methodologies, 29.4- and 48.8-nH inductance for short and long commutation loops, PD-free insulation, and satisfactory thermal performance are achieved with an only 1.77-kg layout. Experimental results confirm that the efficiency of the 1-MVA ANPC inverter can reach 98.97% under half-load conditions with the designed bus bar.
- 18 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (1) , 1135-1152
Design and Characterization of Bus Bars for 1-MVA Three-Level ANPC Inverters in Aerospace Applications
Bus bars play a crucial role in connecting components and are widely utilized in high-power inverters. Efforts have been made in the past to reduce the stray inductance of bus bars. In the case of multilevel inverters, which involve more complex commutation loops than their two-level counterparts, the physical layout and parasitic parameters of bus bars are particularly important. Furthermore, for novel and more demanding applications such as aerospace, bus bars need to be designed to be lightweight while ensuring a partial discharge (PD)-free insulation performance. Given the challenging cooling condition in aerospace applications, the thermal design and cooling performance of bus bars also warrant considerable attention. This article presents a comprehensive design approach of a laminated bus bar for a 1.5-kV 1-MVA three-level active neutral-point-clamped (ANPC) inverter for electrified aircraft propulsion. With the proposed design methodologies, 29.4- and 48.8-nH inductance for short and long commutation loops, PD-free insulation, and satisfactory thermal performance are achieved with an only 1.77-kg layout. Experimental results confirm that the efficiency of the 1-MVA ANPC inverter can reach 98.97% under half-load conditions with the designed bus bar.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3258-3282
Multilevel Inverters for Electric Aircraft Applications: Current Status and Future Trends
Aviation electrification has been in the spotlight over the last decade, expected to lead to a more sustainable future. As the power demand and the voltage level of onboard electric power systems dramatically increase, multilevel inverters have attracted the attention of the aviation industry for their superior performance. This paper reviews multilevel inverters for electric aircraft applications. The functions of multilevel inverters in different subsystems of electric aircraft are summarized. The advantages of multilevel inverters compared with their two-level counterparts in electric aircraft, in terms of efficiency, power density, reliability, costs, and power quality, are evaluated through literature review and case studies. Technical innovations with respect to the design, control, modulation, and prototyping of multilevel inverters for aviation applications are also introduced. Finally, future trends of multilevel inverters for electric aircraft applications are discussed.
- 17 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 10 (2) , 3258-3282
Multilevel Inverters for Electric Aircraft Applications: Current Status and Future Trends
Aviation electrification has been in the spotlight over the last decade, expected to lead to a more sustainable future. As the power demand and the voltage level of onboard electric power systems dramatically increase, multilevel inverters have attracted the attention of the aviation industry for their superior performance. This paper reviews multilevel inverters for electric aircraft applications. The functions of multilevel inverters in different subsystems of electric aircraft are summarized. The advantages of multilevel inverters compared with their two-level counterparts in electric aircraft, in terms of efficiency, power density, reliability, costs, and power quality, are evaluated through literature review and case studies. Technical innovations with respect to the design, control, modulation, and prototyping of multilevel inverters for aviation applications are also introduced. Finally, future trends of multilevel inverters for electric aircraft applications are discussed.
- 27 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (1) , 191-203
A Diagnosis Strategy for Multiple IGBT Open-Circuit Faults of Modular Multilevel Converters
Multiple insulated gate bipolar transistor (IGBT) open-circuit faults severely affect the reliable operation of modular multilevel converters (MMCs). The existing literatures have not provided an effective diagnosis algorithm for MMCs when multiple IGBT open-circuit faults simultaneously appear in one arm. This paper presents a diagnosis strategy to handle that condition. Fault detection and estimation of the faulty submodule (SM) number is implemented by checking the value of the arm voltage error. The faulty SMs are located by observing when the transition of their switching functions leads to an obvious change of the arm voltage error. Meanwhile, the errors between the measured and predicted capacitor voltages are utilized to accelerate the localization. All of the faulty SMs can be quickly located one by one within several control cycles by using the proposed localization method. Simulation and experimental results demonstrate the validity of the proposed diagnosis strategy.
- 27 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (1) , 191-203
A Diagnosis Strategy for Multiple IGBT Open-Circuit Faults of Modular Multilevel Converters
Multiple insulated gate bipolar transistor (IGBT) open-circuit faults severely affect the reliable operation of modular multilevel converters (MMCs). The existing literatures have not provided an effective diagnosis algorithm for MMCs when multiple IGBT open-circuit faults simultaneously appear in one arm. This paper presents a diagnosis strategy to handle that condition. Fault detection and estimation of the faulty submodule (SM) number is implemented by checking the value of the arm voltage error. The faulty SMs are located by observing when the transition of their switching functions leads to an obvious change of the arm voltage error. Meanwhile, the errors between the measured and predicted capacitor voltages are utilized to accelerate the localization. All of the faulty SMs can be quickly located one by one within several control cycles by using the proposed localization method. Simulation and experimental results demonstrate the validity of the proposed diagnosis strategy.