Hanyu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hanyu Wang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Gabor C. Temes
School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR, USA
3 shared publications - Faraz Adin
School of EECS, Oregon State University, Corvallis, OR, USA
2 shared publications - Chi-Seng Lam
University of Macau
1 shared publication - Chia-Hung Chen
Department of Electronics and Electrical Engineering, National Yang Ming Chiao Tung University (NYCU), R.O.C, Hsinchu, Taiwan
1 shared publication Ching-Ju Lu
National Yang Ming Chiao Tung University (NYCU) R.O.C
1 shared publicationErhan Hancioglu
Infineon Technologies, Lynnwood, WA, USA
1 shared publication
Latest Publications
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (8) , 988-992
98-dB SNDR Multi-Residue Two-Step Incremental ADC With Two-Capacitor SAR
This paper presents a novel multi-residue two-step incremental ADC (IADC) with a two-capacitor SAR. It introduces the multi-residue sampling (MRS) technique to enhance Signal-to-Quantization-Noise Ratio (SQNR) and to minimize the thermal noise penalty commonly occuing in high-resolution IADCs. The multi-residue incremental ADC (MRIADC) was designed in a 0.18 μm CMOS process. It achieves an SNDR of 98 dB over a 2.4 kHz signal band. The power consumption is 78.76 μW from a 1.8 V supply voltage which gives Schreier Figure of Merit of 172.9 dB.
- 19 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (8) , 988-992
98-dB SNDR Multi-Residue Two-Step Incremental ADC With Two-Capacitor SAR
This paper presents a novel multi-residue two-step incremental ADC (IADC) with a two-capacitor SAR. It introduces the multi-residue sampling (MRS) technique to enhance Signal-to-Quantization-Noise Ratio (SQNR) and to minimize the thermal noise penalty commonly occuing in high-resolution IADCs. The multi-residue incremental ADC (MRIADC) was designed in a 0.18 μm CMOS process. It achieves an SNDR of 98 dB over a 2.4 kHz signal band. The power consumption is 78.76 μW from a 1.8 V supply voltage which gives Schreier Figure of Merit of 172.9 dB.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (8) , 3744-3752
An 89.5 dB SNDR 500 kHz BW Largely Passive Fourth-Order Noise-Coupled Delta-Sigma Modulator
Multi-Stage Noise Shaping (MASH) structures have traditionally supported high-resolution analog-to-digital converters (ADCs) by avoiding instability in high-order single loops. While Sturdy MASH (SMASH) reduces the need for precise analog/digital matching in MASH, it reintroduces stability concerns and distortion in integrators due to larger signal swings. This brief presents a modified SMASH design with an efficient architecture that includes one active integrator and three passive ones. Compared to SMASH, the proposed design achieves a flatter signal transfer function (STF) and lower distortion across a wide band. The quantization noise from the first active integrator is filtered by a passive switched-capacitor filter (SCF) before being fed to a second-order passive noise-shaping (NS) quantizer. The structure can be transformed into a cascade of integrators with feedforward (CIFF) delta-sigma modulator (DSM) that traditionally requires a high-gain block. A fourth-order DSM was designed in 65 nm technology for performance validation and comparison, demonstrating an 89.5 dB SNDR and 92.8 dB dynamic range (DR) within a 500 kHz bandwidth using a 25 MHz clock with OSR =25. The simulated modulator power consumption is $290~\mu $ W, yielding a Schreier FOM of 181.9 dB.
- 14 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (8) , 3744-3752
An 89.5 dB SNDR 500 kHz BW Largely Passive Fourth-Order Noise-Coupled Delta-Sigma Modulator
Multi-Stage Noise Shaping (MASH) structures have traditionally supported high-resolution analog-to-digital converters (ADCs) by avoiding instability in high-order single loops. While Sturdy MASH (SMASH) reduces the need for precise analog/digital matching in MASH, it reintroduces stability concerns and distortion in integrators due to larger signal swings. This brief presents a modified SMASH design with an efficient architecture that includes one active integrator and three passive ones. Compared to SMASH, the proposed design achieves a flatter signal transfer function (STF) and lower distortion across a wide band. The quantization noise from the first active integrator is filtered by a passive switched-capacitor filter (SCF) before being fed to a second-order passive noise-shaping (NS) quantizer. The structure can be transformed into a cascade of integrators with feedforward (CIFF) delta-sigma modulator (DSM) that traditionally requires a high-gain block. A fourth-order DSM was designed in 65 nm technology for performance validation and comparison, demonstrating an 89.5 dB SNDR and 92.8 dB dynamic range (DR) within a 500 kHz bandwidth using a 25 MHz clock with OSR =25. The simulated modulator power consumption is $290~\mu $ W, yielding a Schreier FOM of 181.9 dB.
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 67 (12) , 4174-4186
LDO-Free Power Management System: A 10-bit Pipelined ADC Directly Powered by Inductor-Based Boost Converter With Ripple Calibration
This article presents a compact power management solution for a pipeline analog-to-digital converter (ADC), employing only a switching-mode power converter. By directly powering the ADC using a boost DC-DC converter, the power delivery network (PDN) exhibits an overall-high power efficiency. The proposed foreground ADC calibration calibrates the ripple error induced from the power converter, which obviates the need for well-regulated supply and reference voltage offered by low-efficiency linear low-dropout regulators (LDOs). A chip integrates the boost DC-DC converter and the pipelined ADC with an external power inductor. The prototype, implemented in 65-nm CMOS, occupies 2.34-mm 2 of total active area (9.4% - ADC, 2.6% - power controller and switches, and 88% - output capacitance). In the measurement, the boost converter, switching at 31.25MHz, converts a 0.5V input to 1.2V and delivers 22.8mW of power to the pipeline ADC. The boost DC-DC converter supplies all voltage domains, including analog/digital power supply and reference. The resulting overall system power efficiency is 78.6%. Sampled at 500MS/s, the ADC achieves a signal-to-noise and distortion ratio (SNDR) of 34.7/39.9dB without/with the ripple calibration for an input frequency of 177MHz, respectively.
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 67 (12) , 4174-4186
LDO-Free Power Management System: A 10-bit Pipelined ADC Directly Powered by Inductor-Based Boost Converter With Ripple Calibration
This article presents a compact power management solution for a pipeline analog-to-digital converter (ADC), employing only a switching-mode power converter. By directly powering the ADC using a boost DC-DC converter, the power delivery network (PDN) exhibits an overall-high power efficiency. The proposed foreground ADC calibration calibrates the ripple error induced from the power converter, which obviates the need for well-regulated supply and reference voltage offered by low-efficiency linear low-dropout regulators (LDOs). A chip integrates the boost DC-DC converter and the pipelined ADC with an external power inductor. The prototype, implemented in 65-nm CMOS, occupies 2.34-mm 2 of total active area (9.4% - ADC, 2.6% - power controller and switches, and 88% - output capacitance). In the measurement, the boost converter, switching at 31.25MHz, converts a 0.5V input to 1.2V and delivers 22.8mW of power to the pipeline ADC. The boost DC-DC converter supplies all voltage domains, including analog/digital power supply and reference. The resulting overall system power efficiency is 78.6%. Sampled at 500MS/s, the ADC achieves a signal-to-noise and distortion ratio (SNDR) of 34.7/39.9dB without/with the ripple calibration for an input frequency of 177MHz, respectively.